Synthesis of Ultrathin MoS 2 Nanosheets Embedded in 3D Hierarchically Nitrogen‐and‐Sulfur Co‐Doped Porous Carbon Composites as Efficient Oxygen Reduction Reaction Catalyst

Synergy of atomic hydrogen reduction and reactive oxygen species oxidation over confined Mn bifunctional site for electrocatalytic deep mineralization

Traditional reduction or oxidation processes generating one-component free radicals face challenges in deep dechlorination and mineralization of chlorophenols from wastewater. Herein, an efficient electrocatalytic process has been developed, which couples atomic H* reduction with reactive oxidation species (•OH and 1O2) oxidation on a bifunctional cathode for 4 -chlorophenol (4 -CP) removal. The N - doped carbon nanotubes encapsulated manganese nanoparticles was fabricated as cathode, which could generate atomic H* , initiating nucleophilic hydrodechlorination in presence of confined MnO sites. Subsequently, electrophilic oxidation by generating mainly 1O2 on confined Mn7C3 sites and •OH on confined MnO sites, facilitating the oxidative processes. Experimental results and theory calculations demonstrated that reductive dechlorination and oxidative mineralization processes could mutually promote each other, resulting in an enhancement factor of 2.90. At pH 7, this process achieved 100 % removal for 4 -CP, 84 % dechlorination, 76 % total organic carbon (TOC) removal and low energy consumption (0.76 kWh g-1TOC) within 120 min. Notably, TOC for chlorophenols containing Cl substituents at different positions and real lake water containing 4 -CP could be almost completely removed. This research establishes confined non-noble bifunctional active sites that synergistically enhance reductive dechlorination and oxidative degradation processes, holding significant treatment potential for application in deep mineralization of organochlorine from water/wastewater.

Green Synthesis of Flowerball-like MoS2/VC Nanocomposite and Its Efficient Catalytic Performance for Oxygen Reduction Either in Alkaline or Acid Media

Opening up electrocatalysts for oxygen reduction reaction (ORR) is essential for practical application in fuel cells and metal-air batteries; however, how to make the catalysts with both good performance and low cost is difficult. Recently, research on the ORR of molybdenum disulfide-based catalysts in alkaline electrolytes has been on the rise. However, the development of MoS2 catalyst for acidic ORR is still in its infancy. Herein, without using reductant and morphology control reagent, we firstly obtained flowerball-like MoS2/Vulcan XC-72R (VC) nanocomposites via hydrothermal method. The designed composite exhibits a nearly 4e− ORR process with 0.78 and 0.92 V onset potentials in 0.1 M KOH and HClO4, respectively. Furthermore, the flowerball-like composite shows utmost electrochemical stability judging by 87 and 80% current retention for about 5.5 h either in alkaline or acid media, long term durability for continuous 10,000 cycles, and stronger resistance to methanol than the commercial Pt/C catalyst. The abundant Mo edges as catalytic active centers of flowerball-like structure, high electron conductivity, and enhanced mass transport in either alkaline or acidic electrolyte are favorable for catalytic performance. The prepared catalyst provides great potential for the substitution of noble metal based catalysts in fuel cells and metal-air batteries.

Activated biochar derived from peanut shells as the electrode materials with excellent performance in Zinc-air battery and supercapacitance

The use of activated biochar-based electrode derived from waste biomass in energy technologies, such as metal-air batteries and supercapacitors, is an important strategy for realizing energy and environmental sustainability in the future. Herein, peanut shells (waste biomass) were employed to prepare activated biochar materials by pyrolysis in molten KCl and heat-treatment. The effective dispersion and corrosion effects of molten salt for the pyrolysis products during pyrolysis obviously increase defects and specific surface area of the activated biochar materials. The prepared activated biochar material (PS-800-1000) by pyrolysis in molten KCl at 800 °C and heat-treatment at 1000 °C exhibits excellent catalytic activity with half-wave potential of 0.84 V vs. RHE, comparable to commercial Pt/C for oxygen reduction reaction (ORR) in 0.1 M KOH and outstanding supercapacitance performance in 6 M KOH with high specific capacitance (355 F g^-1 at 0.5 A g^-1), which exceeds all reported biochar derived from peanut shells. The PS-800-1000-based zinc-air battery (ZAB) displays higher peak power density (141 mW cm^-2), specific capacity (767 mAh g_Zn^-1) and cycling stability than Pt/C-based ZAB. The activated biochar prepared by pyrolysis in molten KCl and heat-treatment method from peanut shells can be a promising candidate for replacing precious metals in energy conversion/storage devices.

One-pot synthesis of N,S-doped pearl chain tube-loaded Ni3S2 composite materials for high-performance lithium-air batteries

To improve the high reversibility of lithium-air batteries, an air electrode needs to have excellent electrochemical performance and spatial structure. Ni3S2 nanoparticles are loaded onto an N,S-doped pearl chain tube (N,S-PCT) by a method called quasi-chemical vapor deposition (Q-CVD). Additionally, N and S are doped during the synthesis process, thereby forming an ideal pipe rack-like structure. The large amount of space in the tube rack can provide sufficient storage to act as a buffer for the discharge products, and the interconnected tubes can effectively promote the dispersion of O2 and electrolyte. The addition of Ni3S2 nanoparticles effectively reduces the charge transfer resistance, thereby increasing the electron mobility of the cathode. Ni3S2@N,S-PCT cathodes effectively improve the cycling and high-rate performance of lithium-air batteries, demonstrating an ultrahigh discharge capacity of 16 733.7 mA h g-1 at a current density of 400 mA g-1 and an ultrahigh discharge capacity of 5088.1 mA h g-1 at a current density of 1000 mA g-1. When the cut-off capacity is 1000 mA h g-1, the battery with the Ni3S2@N,S-PCT-800 electrode can achieve cycling stability for 148 cycles. This research provides a new solution for the design of lithium-air batteries with high electrocatalytic performance.