Highly Efficient and Stable Mn-Co1.29Ni1.71O4 Electrocatalysts for Alkaline Water Electrolysis: Atomic Doping Strategy for Enhanced OER and HER Performance

Water electrolysis for hydrogen production has garnered significant attention due to its advantages of high efficiency, environmental friendliness, and abundant resources. Developing cost-effective, efficient, and stable materials for water electrolysis is therefore crucial. In this work, we synthesized a series of highly efficient multifunctional Mn-Co1.29Ni1.71O4 electrocatalysts through an atomic doping strategy for alkaline electrocatalysts. The unique structure features and large specific surface area of these catalysts provide abundant active sites. The Mn-Co1.29Ni1.71O4 catalysts exhibit an excellent oxygen evolution reaction (OER) performance in 1.0 M KOH electrolyte, with an overpotential of 334.3 mV at a current density of 10 mA cm-2 and 373.3 mV at 30 mA cm-2. Additionally, the catalysts also demonstrate a Tafel slope of 76.7 mV dec-1 and outstanding durability. As hydrogen evolution reaction (HER) electrocatalysts, it shows an overpotential of 203.5 mV at -10 mA cm-2 and a Tafel slope of 113.6 mV dec-1. When the catalysts can be utilized for the overall water splitting, the catalyst requires a decomposition voltage of 1.96 V at 50 mA cm-2. These results indicate that the high catalytic activity and stability of Mn-Co1.29Ni1.71O4 samples make it a highly promising candidate for industrial-scale applications.

Optimizing photocatalytic hydrogen evolution performance by rationally constructing S-scheme heterojunction to modulate the D-band center

The research in the field of photocatalysis has progressed, with the development of heterojunctions being recognized as an effective method to improve carrier separation efficiency in light-induced processes. In this particular study, CuCo2S4 particles were attached to a new cubic CdS surface to create an S-scheme heterojunction, thus successfully addressing this issue. Specifically, owing to the higher conduction band and Fermi level of CuCo2S4 compared to CdS, they serve as the foundation and driving force for the formation of an S-scheme heterojunction. Through in-situ X-ray photoelectron spectroscopy and electron paramagnetic resonance analysis, the direction of charge transfer in the composite photocatalyst under light exposure was determined, confirming the charge transfer mechanism of the S-scheme heterojunction. By effectively constructing the S-scheme heterojunction, the d-band center of the composite photocatalyst was adjusted, reducing the energy needed for electron filling in the anti-bonding energy band, promoting the transfer of photogenerated carriers, and ultimately enhancing the photocatalytic hydrogen production. performance. After optimization, the hydrogen evolution activity of the composite photocatalyst CdS-C/CuCo2S4-3 reached 5818.9 μmol g-1h-1, which is 2.6 times higher than that of cubic CdS (2272.3 μmol g-1h-1) and 327.4 times higher than that of CuCo2S4 (17.8 μmol g-1h-1), showcasing exceptional photocatalytic activity. Electron paramagnetic resonance and in situ X-ray photoelectron spectroscopy have established a theoretical basis for designing and constructing S-scheme heterojunctions, offering a viable method for adjusting the D-band center to enhance the performance of photocatalytic hydrogen evolution.

Bifunctional Electrocatalysts for Overall and Hybrid Water Splitting

Electrocatalytic water splitting driven by renewable electricity has been recognized as a promising approach for green hydrogen production. Different from conventional strategies in developing electrocatalysts for the two half-reactions of water splitting (e.g., the hydrogen and oxygen evolution reactions, HER and OER) separately, there has been a growing interest in designing and developing bifunctional electrocatalysts, which are able to catalyze both the HER and OER. In addition, considering the high overpotentials required for OER while limited value of the produced oxygen, there is another rapidly growing interest in exploring alternative oxidation reactions to replace OER for hybrid water splitting toward energy-efficient hydrogen generation. This Review begins with an introduction on the fundamental aspects of water splitting, followed by a thorough discussion on various physicochemical characterization techniques that are frequently employed in probing the active sites, with an emphasis on the reconstruction of bifunctional electrocatalysts during redox electrolysis. The design, synthesis, and performance of diverse bifunctional electrocatalysts based on noble metals, nonprecious metals, and metal-free nanocarbons, for overall water splitting in acidic and alkaline electrolytes, are thoroughly summarized and compared. Next, their application toward hybrid water splitting is also presented, wherein the alternative anodic reactions include sacrificing agents oxidation, pollutants oxidative degradation, and organics oxidative upgrading. Finally, a concise statement on the current challenges and future opportunities of bifunctional electrocatalysts for both overall and hybrid water splitting is presented in the hope of guiding future endeavors in the quest for energy-efficient and sustainable green hydrogen production.

Djurleite Copper Sulfide-Coupled Cobalt Sulfide Interface for a Stable and Efficient Electrocatalyst

Transition metal sulfides (TMS) exhibit proliferated edge sites, facile electrode kinetics, and improved intrinsic electrical conductivity, which demand low potential requirements for total water splitting application. Here, we have propounded copper sulfide-coupled cobalt sulfide nanosheets grown on 3D nickel as an electrocatalyst for hydrogen (HER) and oxygen evolution (OER) reactions. The formation of djurleite copper sulfide with a Cu vacancy enables faster H⁺ ion transport and shows improved HER activity with a remarkably lower overpotential of 164 mV at 10 mA/cm², whereas cobalt-incorporated copper sulfide undergoes cation exchange during synthesis and shows elevated OER activity with a lower overpotential of 240 mV at 10 mA/cm² for the OER. Moreover, Cu_2-xS/Co is said to have a hybrid CoS-CoS₂ interface and provide Co²⁺ active sites on the surface and enable the fast adsorption of intermediate species (OH*, O*, and OOH*), which lowers the potential requirement. The copper vacancy and cation exchange with a hybrid CoS-CoS₂ structure are helpful in supplying more surface reactive species and faster ion transport for the HER and OER, respectively. The full-cell electrolyzer requires a very low potential of 1.58 V to attain a current density of 10 mA/cm², and it shows excellent stability for 50 h at 100 mA/cm² as confirmed by the chronopotentiometry test.

Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments

Replacing fossil fuels with energy sources and carriers that are sustainable, environmentally benign, and affordable is amongst the most pressing challenges for future socio-economic development. To that goal, hydrogen is presumed to be the most promising energy carrier. Electrocatalytic water splitting, if driven by green electricity, would provide hydrogen with minimal CO2 footprint. The viability of water electrolysis still hinges on the availability of durable earth-abundant electrocatalyst materials and the overall process efficiency. This review spans from the fundamentals of electrocatalytically initiated water splitting to the very latest scientific findings from university and institutional research, also covering specifications and special features of the current industrial processes and those processes currently being tested in large-scale applications. Recently developed strategies are described for the optimisation and discovery of active and durable materials for electrodes that ever-increasingly harness first-principles calculations and machine learning. In addition, a technoeconomic analysis of water electrolysis is included that allows an assessment of the extent to which a large-scale implementation of water splitting can help to combat climate change. This review article is intended to cross-pollinate and strengthen efforts from fundamental understanding to technical implementation and to improve the 'junctions' between the field's physical chemists, materials scientists and engineers, as well as stimulate much-needed exchange among these groups on challenges encountered in the different domains.