Pyrene-derived novel one- and two-component organogelators

Enzyme-Induced Supramolecular Order in Pyrene Dipeptide Hydrogels for the Development of an Efficient Energy-Transfer Template

Peptide self-assembly is gathering much attention due to the precise control it provides for the arrangement of functional moieties for the fabrication of advanced functional materials. It is desirable to use a physical, chemical, or biological trigger that can control the self-assembly process. In the current article, we have applied an enzyme to induce the peptide self-assembly of an aromatic peptide amphiphile, which modulates the supramolecular order in the final gel phase material. We accessed diverse peptide hydrogels from identical gelator concentrations by simply changing the enzyme concentration, which controlled the reaction kinetics and influenced the dynamics of self-assembly. Depending upon the concentration of the enzyme, a bell-shaped relationship was observed in terms of intermolecular interactions, morphology, and properties of the final gel phase material. The access of non-equilibrium structures was further demonstrated by fluorescence emission spectroscopy, circular dichroism spectroscopy, atomic force microscopy, transmission electron microscopy, and rheology. This strategy is applied to construct a charge-transfer hydrogel by doping the donor hydrogel with an acceptor moiety, which exhibits efficient energy transfer. Interestingly, such structural control at the nanoscopic level can further tune the energy-transfer efficiency by simply modulating the enzyme concentration.

K. AK, Sagar S, Das S, Varghese R. Blue-emissive two-component supergelator with aggregation-induced enhanced emission

Two-component organogels offer several advantages over one-component gels, but their design is highly challenging. Hence, it is extremely important to design new approaches for the crafting of two-component organogels with interesting optical and mechanical properties. Herein, we report the design of a new class of two-component supergelators obtained from the assembly between acid functionalized tetraphenylethylene (TPE)-based dendrons and alkylated melamine. No gelation behaviour is observed for the individual components, but interestingly, remarkable gelation behaviour is observed for their hydrogen-bonded complex. The primary driving force responsible for the gelation is the strong π–π stacking interaction of TPE units. Because of the strong π-stacking of TPEs in the gel state, the C(sp²)–C(sp²) bond rotation of the TPE segment is completely arrested in the gel state, which results in intense fluorescence emission of the gels. Furthermore, excellent elastic response is observed for the gels as evident from their high storage modulus compared to loss modulus values. Our results clearly demonstrate that by the appropriate selection of the molecular components, this approach can be applied for the creation of functional nanomaterials with emergent properties absent in the individual blocks.

Design of a novel class of two-component, highly emissive, low molecular weight supergelator is reported.

Aggregation-Induced Emission and Organogels with Chiral and Racemic Pyrene-Substituted Cyanostyrenes

The synthesis, photophysical investigations, and organogel formation of pyrene-phenyl acrylonitriles (1-6) bearing mono-, di-, and trichiral and racemic substitutions were studied. The molecules self-assemble in water and show remarkable emission wavelength and intensity changes associated with distinct color changes. Cryo-scanning electron microscopy (Cryo-SEM) images show the formation of uniform nanoaggregates for the monosubstituted derivatives and network-like structures for di- and trisubstituted derivatives. The favorable π-π stacking ability of the coplanar pyrene ring, steric restrictions due to the cyano group, and beneficial noncovalent interactions from the citronellol moiety allow the molecules to form excellent organogels with fibrous and twisted ribbon morphology for the racemic and chiral derivatives. The organogels based on small molecules could be of high relevance for potential investigations involving soft biological matter.

Catalytic Gels for a Prebiotically Relevant Asymmetric Aldol Reaction in Water: From Organocatalyst Design to Hydrogel Discovery and Back Again

This paper reports an investigation into organocatalytic hydrogels as prebiotically relevant systems. Gels are interesting prebiotic reaction media, combining heterogeneous and homogeneous characteristics with a structurally organized active "solid-like" catalyst separated from the surrounding environment, yet in intimate contact with the solution phase and readily accessible via "liquid-like" diffusion. A simple self-assembling glutamine amide derivative 1 was initially found to catalyze a model aldol reaction between cyclohexanone and 4-nitrobenzaldehyde, but it did not maintain its gel structure during reaction. In this study, it was observed that compound 1 could react directly with the benzaldehyde to form a hydrogel in situ based on Schiff base 2 as a low-molecular-weight gelator (LMWG). This new dynamic gel is a rare example of a two-component self-assembled LMWG hydrogel and was fully characterized. It was demonstrated that glutamine amide 1 could select an optimal aldehyde component and preferentially assemble from mixtures. In the hunt for an organocatalyst, reductive conditions were applied to the Schiff base to yield secondary amine 3, which is also a highly effective hydrogelator at very low loadings with a high degree of nanoscale order. Most importantly, the hydrogel based on 3 catalyzed the prebiotically relevant aldol dimerization of glycolaldehyde to give threose and erythrose. In buffered conditions, this reaction gave excellent conversions, good diastereoselectivity, and some enantioselectivity. Catalysis using the hydrogel of 3 was much better than that using non-assembled 3-demonstrating a clear benefit of self-assembly. The results suggest that hydrogels offer a potential strategy by which prebiotic reactions can be promoted using simple, prebiotically plausible LMWGs that can selectively self-organize from complex mixtures. Such processes may have been of prebiotic importance.

Multi-stimuli-responsive hydrogels of gluconamide-tailored anthracene

In this work, two amphiphilic gluconamide-tailored anthracene gelators 1 and 2 have been synthesized, and found to form stable hydrogels with fibril structures. The stimuli-responsive behaviors of hydrogel 1 and 2 were investigated thoroughly by temperature-dependent 1H NMR, UV-Vis, rheometry, transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The results showed that hydrogel 1 exhibited multiple responsive behaviours upon exposure to stimuli including temperature, anions, light, electron-deficient chemicals and external stress; conversely, hydrogel 2 showed a distinct responsive phenomenon attributed to a subtle structural difference in the linker. This work demonstrates that gluconamide-tailored anthracene gelators could be a potential soft material and highlights the importance of a precisely designed structure.

Mechanical properties of supramolecular polymeric materials cross-linked by donor–acceptor interactions

We prepare a tough elastomer with aromatic donor and acceptor molecules introduced on the same polymer side chain.

Gels with sense: supramolecular materials that respond to heat, light and sound

Advances in the field of supramolecular chemistry have made it possible, in many situations, to reliably engineer soft materials to address a specific technological problem. Particularly exciting are "smart" gels that undergo reversible physical changes on exposure to remote, non-invasive environmental stimuli. This review explores the development of gels which are transformed by heat, light and ultrasound, as well as other mechanical inputs, applied voltages and magnetic fields. Focusing on small-molecule gelators, but with reference to organic polymers and metal-organic systems, we examine how the structures of gelator assemblies influence the physical and chemical mechanisms leading to thermo-, photo- and mechano-switchable behaviour. In addition, we evaluate how the unique and versatile properties of smart materials may be exploited in a wide range of applications, including catalysis, crystal growth, ion sensing, drug delivery, data storage and biomaterial replacement.

A Low-Molecular-Weight Gelator Composed of Pyrene and Fluorene Moieties for Effective Charge Transfer in Supramolecular Ambidextrous Gel

Charge-transfer (CT) gel materials obtained from low-molecular-weight (LMW) compounds through a supramolecular self-assembly approach have received fascinating attention by many researchers because of their interesting material property and potential applications. However, most of the CT gel materials constructed were of organogels while the construction of CT gels in the form of a hydrogel is a challenge because of the solubility issue in water, which considerably limits the use of CT hydrogels. Herein, for the first time, we report a new LMW gelator [N^α-(fluorenylmethoxycarbonyl)-N^ε-(δ-butyric-1-pyrenyl)-l-lysine, (FmKPy)], composed of two functional moieties such as fluorenylmethoxycarbonyl and pyrene, which not only parade both hydro and organo (ambidextrous) supramolecular gel formation but also exhibit CT ambidextrous gels when mixed with an electron acceptor such as 2,4,7-trinitro-9-fluorenone (TNF). This finding is significant as the established CT organogelator in the literature did not form an organogel in the absence of an electron acceptor or lose their gelation property upon the addition of the acceptor. CT between pyrene and TNF was confirmed by the color change as well as the appearance of the CT band in the visible region of the absorption spectrum. CT between FmKPy and TNF was supported by the solvent dilution method using tetrahydrofuran as the gel breaker and pyrene fluorescence quenching in the case compound containing pyrene and TNF. The morphology of FmKPy ambidextrous gels indicates the fibrous nature while the self-assembled structure is primarily stabilized by π-π stacking among fluorenyl and pyrenyl moieties and hydrogen bonding between amide groups. The FmKPy-TNF CT ambidextrous gel retains the fibrous nature; however, the size of the fibers changed. In FmKPy-TNF CT gels, TNF is intercalated between pyrene moieties in the self-assembled structure as confirmed by fluorescence quenching and powder X-ray diffraction. The FmKPy ambidextrous gel exhibits significant properties such as low minimum gelation concentration (MGC), thixotropic nature, pH stimuli response, and high thermal stability. Upon the addition of TNF, the FmKPy-TNF CT ambidextrous gel maintains all these properties except MGC which increased for FmKPy-TNF. Because pyrene-based LMW organogels have been developed widely for many applications while their hydrogels were limited, the current finding of the pyrene-based ambidextrous fluorescent gel with the CT property provides a wide opportunity to use FmKPy as a soft material maker and also for potential applications in fields like surface coating, three-dimensional printing, and so forth.

Co-assembly of donor and acceptor towards organogels tuned by charge transfer interaction strength

Co-assembly of n-type semiconductors NDI and PDI with p-type pyrene derivatives resulted in the formation of stable organogels, which was induced by the strong charge transfer (CT) interactions between acceptors and donors in chloroform. The dimension size of the aromatic core from the acceptors was found to have a significant impact on the organogels. The width of the fibers from CT gels with NDI is about twice that from gels with PDI. It was found that the acceptor NDI preferred an alternate stacking with donors, intercalated with each other via CT interactions. In contrast, the acceptor PDI preferred to stack among themselves within the assemblies and this arose from the stronger π-π interactions because they had larger aromatic cores than the acceptor NDI. The dimension size of the aromatic core has been proved to have a significant impact on the organogels. The substituent impact of the donors was also studied.

Steric ploy for alternating donor-acceptor co-assembly and cooperative supramolecular polymerization

The presence of a bulky peripheral wedge destabilizes the homo-assembly of an amide functionalized acceptor (A) monomer and thereby enables the formation of an alternating supramolecular copolymer with an amide appended donor (D) monomer via the synergistic effect of H-bonding and the charge-transfer (CT) interaction with a remarkably high Ka of 31 000 M-1. In sharp contrast, H-bonding driven homo-polymers of A and D are formed by just replacing the bulky chains of the A monomer with linear hydrocarbons. By taking advantage of the clear difference in the critical temperature for the onset of the AA or DD homo-assemblies and DA co-assembly (TDA ≫ TAA or TDD), the supramolecular polymerization pathway of the NDI-monomer could be fully diverted from isodesmic to cooperative in the presence of a small amount of DAN which helped the in situ production of nucleating sites involving the D-A CT-complex at a relatively higher temperature and the subsequent chain growth at TAA following the nucleation-elongation model.

Rational Design of Urea-Based Two-Component Organogelators

Low molecular weight gelators are versatile and responsive gel-forming systems. However, it is still a challenge to develop a new organogelator for a precise application, i.e., to gel a predetermined liquid. We propose a simple concept of a two-component gelling system that can be rationally adapted to gel liquids ranging in polarity from silicone oil to acetonitrile.

Mechanofluorochromism of 1-Alkanoylaminopyrenes

To create a new series of mechanofluorochromic materials and to elucidate the mechanism of the phenomenon of mechanofluorochromism, 1-alkanoylaminopyrenes including 1-acetylaminopyrene (AAPy), 1-octanoylaminopyrene (OAPy), and 1-stearoylaminopyren (SAPy) were prepared. It was found that these materials exhibited mechanofluorochromism with emission colors in the crystalline samples changing reversibly from bluish purple to yellowish green, which could be induced by mechanical grinding. X-ray crystal structure analysis, electronic absorption, and fluorescence spectroscopies, as well as fluorescence lifetime analysis and powder X-ray diffraction analysis of AAPy suggested that the present mechanofluorochromism was caused by developing crystal defects through grinding. Intermolecular hydrogen bonds were suggested to play an important role in the occurrence of mechanofluorochromism, suppressing the face-to-face overlapping of pyrene moieties to form excimers in the pristine crystal.

Tetrapeptide-coumarin conjugate 3D networks based on hydrogen-bonded charge transfer complexes: gel formation and dye release

Oligopeptide-based derivatives are important synthons for bio-based functional materials. In this article, a Gly-(L-Val)-Gly-(L-Val)-coumarin (GVGV-Cou) conjugate was synthesized, which forms 3D networks in ethanol. The gel nanostructures were characterized by UV-vis spectroscopy, FT-IR spectroscopy, X-ray diffraction (XRD), SEM and TEM. It is suggested that the formation of charge transfer (CT) complexes between the coumarin moieties is the main driving force for the gel formation. The capability of the gel to encapsulate and release dyes was explored. Both Congo Red (CR) and Methylene Blue (MB) can be trapped in the CT gel matrix and released over time. The present gel might be used as a functional soft material for guest encapsulation and release.

Recent developments in β-C-glycosides: synthesis and applications

In the last few years, considerable progress has been made in the synthesis of C-glycosides. Despite its challenging chemistry, due to its versatility, C-glycosides play a pivotal role in developing novel materials, surfactants and bioactive molecules. In this review, we present snapshots of various synthetic methodologies developed for C-glycosides in the recent years and the potential application of C-glycosides derived from β-C-glycosidic ketones.

Aqueous dispersions of organogel nanoparticles - potential systems for cosmetic and dermo-cosmetic applications

OBJECTIVE

The preparation and physicochemical characterization of organogel nanoparticles dispersed in water have been developed. These systems could be employed as nanocarrier for cosmetic applications or as hydrophobic reservoirs for drug delivery.

METHODS

Gelled particles of organic liquid and 12-hydroxystearic acid (organogelator) were obtained by hot emulsification (T>Tgel), with a surfactant (acetylated glycol stearate) and polymers (sodium hyaluronate and polyvinyl alcohol) as stabilizing agents, and cooling at room temperature (T<Tgel). An organic UVB sunscreen molecule, obtained by microwave activation, was used as a hydrophobic model molecule. The physicochemical properties of the starting organogel (gelation tests; rheological study) and the dispersed gelled particles (rheological study; particle mean size, size distribution, zeta-potential measurements; physical stability evaluation; UVB absorption and water resistance ability) were studied. The synthesis of sunscreen compound using microwave activation was also described.

RESULTS

According to the gelation test results, organogels were obtained with various organic liquids. Vaseline and almond oils were selected as organic medium for the gelled nanoparticle preparation. A preliminary formulation study was carried out in order to determine the optimal experimental conditions to obtain stable nanoparticle dispersions. Gelled nanoparticles contained the sunscreen model molecule, with mean size of 450 nm, polydispersity index of 0.18 and zeta-potential value above -30 mV, were obtained by ultrasound probe homogenization method. A comparative study of their dispersion ageing showed a greatly enhanced stability after gelation. According to the UVB absorption evaluation, gelled particles improved the photoprotective ability and the photostability of immobilized UVB blocker. They showed a high water resistance (~83%) even after 40 min of immersion.

CONCLUSION

The obtained results demonstrate the interest of these gelled nanoparticles and their aqueous dispersion for the preparation of new formulations for cosmetic and dermo-cosmetic applications.

Charge-transfer interaction mediated organogels from 18β-glycyrrhetinic acid appended pyrene

We describe herein the two-component charge-transfer (CT) interaction induced organogel formation with 18β-glycyrrhetinic acid appended pyrene (GA-pyrene, 3) as the donor, and 2,4,7-trinitrofluorenone (TNF, 4) as the acceptor. The use of TNF (4) as a versatile electron acceptor in the formation of CT gels is demonstrated through the formation of gels in a variety of solvents. Thermal stability, stoichiometry, scanning electron microscopy (SEM), optical micrographs, and circular dichroism (CD) are performed on these CT gels to investigate their thermal and assembly properties. UV–vis, fluorescence, mass spectrometric as well as variable-temperature ¹H NMR experiments on these gels suggest that the CT interaction is one of the major driving forces for the formation of these organogels.

Two types of two-component gels formed from pseudoenantiomeric ethynylhelicene oligomers

Two-component gels formed from pseudoenantiomeric ethynylhelicene oligomers in toluene exhibited two different properties depending on difference in numbers of helicenes in the two components. The combinations (M)-5/(P)-4, (M)-6/(P)-4, and (M)-7/(P)-4, which contained oligomers with comparable numbers of helicenes, formed transparent gels (Type I gels). The combinations (M)-6/(P)-3, (M)-7/(P)-3, and (M)-8/(P)-3, which contained oligomers with considerably different numbers of helicenes, formed turbid gels (Type II gels). Negative Cotton effects were observed for the Type I gels in the region between 350 and 450 nm, and were positive for the Type II gels, despite the use of (M)-oligomers for the longer components. UV/vis exhibited absorption maxima at 350 nm for the Type I gels and at 338 nm for the Type II gels. Different behaviors in gel formation processes were observed by fluorescence studies. Atomic force microscopy analysis showed fiber structures of 25-50 nm diameter for Type I gels and bundles of 100-150 nm diameter for Type II gels. The stoichiometry in gel formation also differed: The Type I gels showed 1:1 stoichiometry of the two components; the Type II gels showed no 1:1 stoichiometry, likely 1:2 stoichiometry. Using the Type I and II gels, two-layer gel systems were constructed.

Ruthenium complex containing block copolymer for the enhancement of carbon nanotube photoconductivity

We report the synthesis of a multifunctional block copolymer incorporated with pyrene and ruthenium terpyridyl thiocyanato complex moieties by reversible addition-fragmentation chain transfer polymerization. The pyrene block in the copolymer facilitates the dispersion of multiwalled carbon nanotubes in DMF solution because of the strong π-π interaction between the pyrene moieties and nanotube surface. On the other hand, the ruthenium complexes greatly enhance the photosensitivity of the functionalized nanotubes in the visible region. The photocurrent responses of the nanotubes at different wavelength measured by conductive AFM spectrum strongly agree with the absorption spectrum of the ruthenium complex. The results demonstrate a new and versatile approach in enhancing and fine-tuning the photosensitivity or other opto-electronic properties of carbon nanotubes by multifunctional block copolymers.