Enhanced catalytic activity and unexpected products from the oxidation of cyclohexene by organic nanoparticles of 5,10,15,20-tetrakis-(2,3,4,5,6-pentafluorophenyl)porphyrinatoiron(III) in water by using O2

Applications of Fluorous Porphyrinoids: An Update†

Porphyrins and related macrocycles have been studied broadly for their applications in medicine and materials because of their tunable physicochemical, optoelectronic and magnetic properties. In this review article, we focused on the applications of fluorinated porphyrinoids and their supramolecular systems and summarized the reports published on these chromophores in the past 5-6 years. The commercially available fluorinated porphyrinoids: meso-perfluorophenylporphyrin (TPPF₂₀ ) perfluorophthalocyanine (PcF₁₆ ) and meso-perfluorophenylcorrole (CorF₁₅ ) have increased photo and oxidative stability due to the presence of fluoro groups. Because of their tunable properties and robustness toward oxidative damage these porphyrinoid-based chromophores continue to gain attention of researchers developing advanced functional materials for applications such as sensors, photonic devices, component for solar cells, biomedical imaging, theranostics and catalysts.

Full use of factors promoting catalytic performance of chitosan supported manganese porphyrin

In order to make full use of the impact of internal and external factors on the performance of title catalyst for ethyl benzene oxidation, the key internal influencing factors on the catalytic performance were modulated by coordinating and grafting manganese porphyrin to mesoporous and macroporous chitosan, and the important external factors (i.e. oxidation reaction conditions) were optimized using Response Surface Methodology. Under the Response Surface Methodology optimized oxidation reaction conditions (176.56 °C, 0.59 MPa, and 0.25 mg amount of manganese porphyrin), the catalyst could be used at least five times. The ethyl benzene conversion, catalyst turnover numbers, and yields reached up to 51.2%, 4.37 × 106 and 36.4% in average, respectively. Compared with the other optimized oxidation reaction conditions, the corresponding values increased 17%, 26% and 53%. Relative to the manganese porphyrin, the catalytic performance and efficiency of the immobilized catalyst had notably increased.

Selective Catalytic Oxidation of Cyclohexene with Molecular Oxygen: Radical Versus Nonradical Pathways

We study the allylic oxidation of cyclohexene with O₂ under mild conditions in the presence of transition‐metal catalysts. The catalysts comprise nanometric metal oxide particles supported on porous N‐doped carbons (M/N:C, M=V, Cr, Fe, Co, Ni, Cu, Nb, Mo, W). Most of these metal oxides give only moderate conversions, and the majority of the products are over‐oxidation products. Co/N:C and Cu/N:C, however, give 70–80 % conversion and 40–50 % selectivity to the ketone product, cyclohexene‐2‐one. Control experiments in which we used free‐radical scavengers show that the oxidation follows the expected free‐radical pathway in almost all cases. Surprisingly, the catalytic cycle in the presence of Cu/N:C does not involve free‐radical species in solution. Optimisation of this catalyst gives >85 % conversion with >60 % selectivity to the allylic ketone at 70 °C and 10 bar O₂. We used SEM, X‐ray photoelectron spectroscopy and XRD to show that the active particles have a cupric oxide/cuprous oxide core–shell structure, giving a high turnover frequency of approximately 1500 h⁻¹. We attribute the high performance of this Cu/N:C catalyst to a facile surface reaction between adsorbed cyclohexenyl hydroperoxide molecules and activated oxygen species.

Ultrasound promoted preparation of Mn(III)-porphyrin nanoparticles: An efficient heterogeneous catalyst for oxidation of alkenes, alkanes and sulfides

In the present research meso-tetrakis(4-carboxyphenyl)porphyrinatomanganese(III) acetate (Mn(TCPP)OAc) nanoparticles have been prepared for the first time without any stabilizing agent or supporting matrix under ultrasonic irradiation. Scanning electron microscopy (SEM) was used to characterize and investigate the nanocatalyst. Rapid, efficient, facile and highly selective oxidation of a wide range of olefins by tetra-[Formula: see text]-butylammonium hydrogen monopersulfate over the prepared manganese nanocatalyst was investigated. Also oxidation of sulfides and alkanes in the presence of the (Mn(TCPP)OAc) nanoparticles were studied. The catalyst is recovered by filtration and reused at least five times.

Fluorinated porphyrinoids as efficient platforms for new photonic materials, sensors, and therapeutics

Porphyrinoids are robust heterocyclic dyes studied extensively for their applications in medicine and as photonic materials because of their tunable photophysical properties, diverse means of modifying the periphery, and the ability to chelate most transition metals. Commercial applications include their use as phthalocyanine dyes in optical discs, porphyrins in photodynamic therapy, and as oxygen sensors. Most applications of these dyes require exocyclic moieties to improve solubility, target diseases, modulate photophysical properties, or direct the self-organization into architectures with desired photonic properties. The synthesis of the porphyrinoid depends on the desired application, but the de novo synthesis often involves several steps, is time consuming, and results in low isolated yields. Thus, the application of core porphyrinoid platforms that can be rapidly and efficiently modified to evaluate new molecular architectures allows researchers to focus on the design concepts rather than the synthesis methods, and opens porphyrinoid chemistry to a broader scientific community. We have focused on several widely available, commercially viable porphyrinoids as platforms: meso-perfluorophenylporphyrin, perfluorophthalocyanine, and meso-perfluorophenylcorrole. The perfluorophenylporphyrin is readily converted to the chlorin, bacteriochlorin, and isobacteriochlorin. Derivatives of all six of these core platforms can be efficiently and controllably made via mild nucleophilic aromatic substitution reactions using primary S, N, and O nucleophiles bearing a wide variety of functional groups. The remaining fluoro groups enhance the photo and oxidative stability of the dyes and can serve as spectroscopic signatures to characterize the compounds or in imaging applications using (19)F NMR. This review provides an overview of the chemistry of fluorinated porphyrinoids that are being used as a platform to create libraries of photo-active compounds for applications in medicine and materials.

Reorganization of porphyrin nanoparticle morphology driven by surface energetics

Organic nanoparticles (ONp) of an Fe(III) porphyrin appended with four [Formula: see text]-polyethyleneglyco-pyridinium moieties prepared in acetonitrile were deposited onto hydrophilic or hydrophobic Si surfaces. Self-organized by intermolecular interactions, ONp reorganize in response to environmental changes. Mechanisms for the control of nanoparticle morphologies and surface patterning by varying surface energies are discussed.

Oxidation mechanism of molecular oxygen over cyclohexene catalyzed by a cobalt l-glutamic acid complex

We introduce a new strategy towards the cyclohexene oxidation reaction, which is driven by molecular oxygen with a cobalt(ii)/amine acid complex as the catalyst without any solvents.

Adaptive organic nanoparticles of a teflon-coated iron (III) porphyrin catalytically activate dioxygen for cyclohexene oxidation

Self-organized organic nanoparticles (ONP) are adaptive to the environmental reaction conditions. ONP of fluorous alkyl iron(III) porphyrin catalytically oxidize cyclohexene to the allylic oxidation products. In contrast, the solvated metalloporphyrin yields both allylic oxidation and epoxidation products. The ONP system facilitates a greener reaction because about 89% reaction medium is water, molecular oxygen is used in place of synthetic oxidants, and the ambient reaction conditions used require less energy. The enhanced catalytic activity of these ONP is unexpected because the metalloporphyrins in the nanoaggregates are in the close proximity and the TON should diminish by self-oxidative degradation. The fluorous alkyl chain stabilizes the ONP toward self-oxidative degradation.

Responsive porphyrinoid nanoparticles: development and applications

The economy of space and materials and the continuously increasing demand for advanced functionalities for diverse technologies requires the development of new synthetic methods. Many nanomaterials have enhanced photophysical and photochemical properties in solutions and/or on surfaces, while others have enhanced chemical properties, compared to the atomic, molecular, or bulk phases. Nanomaterials have a wide range of applications in catalysis, sensors, photonic devices, drug delivery, and as therapeutics for treatment of a variety of diseases. Inorganic nanoparticles are widely studied, but the formation of organic nanomaterials via supramolecular chemistry is more recent, and porphyrinoids are at the forefront of this research because of their optical, chemical, and structural properties. The formation of nanoscaled materials via self-assembly and/or self-organization of molecular subunits is an attractive approach because of reduced energy requirements, simpler molecular subunits, and the material can be adaptive to environmental changes. The presence of biocompatible groups such as peptides, carbohydrates, polyglycols and mixtures of these on the periphery of the porphyrin macrocycle may make nanoparticles suitable for therapeutics. This perspective focuses on responsive, non-crystalline porphyrinoid nanomaterials that are less than about 100 nm in all dimensions and used for catalytic or therapeutic applications.

Nanoaggregates of Mn(III)tetraperfluorophenylporphyrin: a greener approach for allylic oxidation of olefins

Organic nanoparticles of metalloporphyrins can be a versatile catalyst for the selective oxidation of alkenes and other hydrocarbons. The catalytic activity of the metalloporphyrin depends on the nature of the central metal atom, peripheral groups, and the architecture of the porphyrin macrocycle. Herein, we report the catalytic activity of organic nanoparticles of 5,10,15,20-tetrakis-(2,3,4,5,6-pentafluorophenyl)porphyrinato manganese(III), Mn (III)TPPF20, for the oxidation of cyclohexene using molecular oxygen as an oxidant in aqueous solvent under ambient conditions. While the solvated metalloporphyrins catalytically oxidize alkenes to the corresponding epoxide with a modest turn-over numbers, ca. 30 nm organic nanoparticles of Mn (III)TPPF20 have enhanced catalytic activity with up to a two-fold greater turn-over number and yields only allylic oxidation products. The activity of organic nanoparticles is slow compared to the solvated metalloporphyrins. These organic nanoparticles catalytic systems facilitate a greener reaction since ca. 89% of the reaction medium is water, molecular oxygen is used in place of man-made oxidants, and the ambient reaction conditions require less energy. This organic nanoparticle catalytic system also avoids using halogenated solvents commonly used in solution phase reactions. The enhanced catalytic activity of these organic nanoparticles is unexpected because the metalloporphyrins in the nanoaggregates are in the close proximity and the turn-over number should diminish by self-oxidative degradation.

Thin-film-based nanoarchitectures for soft matter: controlled assemblies into two-dimensional worlds

Controlling the organization of molecular building blocks at the nanometer level is of utmost importance, not only from the viewpoint of scientific curiosity, but also for the development of next-generation organic devices with electrical, optical, chemical, or biological functions. Self-assembly offers great potential for the manufacture of nanoarchitectures (nanostructures and nanopatterns) over large areas by using low-energy and inexpensive spontaneous processes. However, self-assembled structures in 3D media, such as solutions or solids, are not easily incorporated into current device-oriented nanotechnology. The scope of this review is therefore to introduce the expanding methodology for the construction of thin-film-based nanoarchitectures on solid surfaces and to try to address a general concept with emphasis on the availability of dynamic interfaces for the creation and manipulation of nanoarchitectures. In this review, the strategies for the construction of nanostructures, the control and manipulation of nanopatterns, and the application of nanoarchitectures are described; the construction strategies are categorized into three classes: i) π-conjugated molecular assembly in two dimensions, ii) bio-directed molecular assembly on surfaces, and iii) recent thin-film preparation technologies.

Preparation, size control, surface deposition, and catalytic reactivity of hydrophobic corrolazine nanoparticles in an aqueous environment

Nanoparticles, each consisting of one of the three molecular corrolazine (Cz) compounds, H(3)(TBP(8)Cz), Mn(III)(TBP(8)Cz), and Fe(III)(TBP(8)Cz) (TBP(8)Cz = octakis(4-tert-butylphenyl)corrolazinato), were prepared via a facile mixed-solvent technique. The corrolazine nanoparticles (MCz-NPs) were formed in H(2)O/THF (10:1) in the presence of a small amount of a polyethylene glycol derivative (TEG-ME) added as a stabilizer. This technique allows highly hydrophobic Czs to be "dissolved" in an aqueous environment as nanoparticles, which remain in solution for several months without visible precipitation. The MCz-NPs were characterized by UV-visible spectroscopy, dynamic light scattering (DLS), and transmission electron microscopy (TEM) imaging, and shown to be spherical particles from 100-600 nm in diameter with low polydispersity indices (PDI = 0.003-0.261). Particle size is strongly dependent on Cz concentration. The H(3)Cz-NPs were adsorbed on to a modified self-assembled monolayer (SAM) surface and imaged by atomic force microscopy (AFM). Adsorption resulted in disassembly of the larger H(3)Cz-NPs to smaller H(3)Cz-NPs, whereby the resulting particle size can be controlled by the surface energy of the monolayer. The Fe(III)Cz-NPs were shown to be competent catalysts for the oxidation of cyclohexene with either PFIB or H(2)O(2) as external oxidant. The reactivity and product selectivity seen for Fe(III)Cz-NPs differs dramatically from that seen for the molecular species in organic solvents, suggesting that both the nanoparticle structure and the aqueous conditions may contribute to significant changes in the mechanism of action of the Fe(III)Cz catalyst.