Functionalcarbo-Butadienes: Nonaromatic Conjugation Effects through a 14-Carbon, 24-π-Electron Backbone

From Stilbenes to carbo-Stilbenes: an Encouraging Prospect

Beyond previously described carbo-naphthalene and carbo-biphenyl, a novel type of bis-carbo-benzenic molecules is envisaged from the stilbene parent. The synthesis, structure, spectroscopic and electrochemical properties of two such carbo-stilbenes are described at complementary experimental and computational DFT levels. In the selected targets, the bare skeletal carbo-mer of carbo-stilbene is decorated by 8 or 10 phenyl groups, 0 or 2 tert-butyl groups, and 2 n-octyl chains, the later substituents being introduced to compensate anticipated solubility issues. As in the parent stilbene series, isomers of the phenylated carbo-stilbenes are characterized. The cis- and trans-isomers are, however, formed in almost equal amounts and could not be separated by either chromatography or crystallization. Nevertheless, due to a slow interconversion at the NMR time scale (up to 55 °C) the 1H NMR signals of both isomers of the two carbo-stilbenes could be tentatively assigned. The calculated structure of the cis-isomer exhibits a helical shape, consistent with the observed magnetic shielding of phenyl p-CH nuclei residing inside the shielding cone of the facing C18 ring. The presence of the two isomers in solution also gives rise to quite broad UV-vis absorption spectra with main bands at ca 460, 560 and 710 nm, and a significant bathochromic shift for the decaphenylated carbo-stilbene vs the di-tert-butyl-octaphenylated counterpart. Square wave voltammograms do not show any resolution of the two isomers, giving a reversible reduction wave at -0.65 or -0.58 V/SCE, and an irreversible oxidation peak at 1.11 V/SCE, those values being classical for most carbo-benzene derivatives. Calculated NICS values (NICS(1)=-12.5±0.2 ppm) also indicate that the aromatic nature of the C18 rings is not markedly affected by the dialkynylbutatriene (DAB) connector between them.

Reductive Aromatization/Dearomatization and Elimination Reactions to Access Conjugated Polycyclic Hydrocarbons, Heteroacenes, and Cumulenes

Acenes, heteroacenes, conjugated polycyclic hydrocarbons, and polycyclic aromatic hydrocarbons (collectively referred to in this review as conjugated polycyclic molecules, CPMs) have fascinated chemists since they were first isolated and synthesized in the mid 19th century. Most recently, these compounds have shown significant promise as the active components in organic devices (e.g., solar cells, thin-film transistors, light-emitting diodes, etc.), and, since 2001, a plethora of publications detail synthetic strategies to produce CPMs. In this review, we discuss reductive aromatization, reductive dearomatization, and elimination/extrusion reactions used to form CPMs. After a brief discussion on early methods to synthesize CPMs, we detail the use of reagents used for the reductive (de)aromatization of precursors containing 1,4-diols/diethers, including SnCl₂ and iodide (I^- ). Extension of these methods to carbomers and cumulenes is briefly discussed. We then describe low-valent metal species used to reduce endoxides to CPMs, and discuss the methods to directly reduce acenediones and acenones to the respective acene. In the final section, we describe methods used to affect aromatization to the desired CPM via extrusion of small, volatile molecules.

Chiral alkynylcarbinols from marine sponges: asymmetric synthesis and biological relevance

Covering: up to March 2014. Previous review on the topic: B. W. Gung, C. R. Chim., 2009, 12, 489-505. Chiral α-functional lipidic propargylic alcohols extracted from marine sponges, in particular of the pacific genus Petrosia, constitute a class of acetylenic natural products exhibiting remarkable in vitro biological activities, especially anti-tumoral cytotoxicity. These properties, associated to functionalities that are uncommon among natural products, have prompted recent projects on asymmetric total synthesis. On the basis of a three-sector structural typology, three main sub-types of secondary alkynylcarbinols (with either alkyl, alkenyl, or alkynyl as the second substituent) can be identified as the minimal pharmacophoric units. Selected natural products containing these functionalities have been targeted using previously known or on purpose-designed procedures, where the stereo-determining step can be: (i) a C-C bond forming reaction (e.g. the Zn-mediated addition of alkynyl nucleophiles to aldehydes in the presence of chiral aminoalcohols), (ii) a functional layout (e.g. the asymmetric organo- or metallo-catalytic reduction of ynones), or (iii) an enantiomeric resolution (e.g. a lipase-mediated kinetic resolution via acetylation). The promising medicinal importance of these targets is finally surveyed, and future investigation prospects are proposed, such as: (i) further total synthesis of known or future extraction products; (ii) the synthesis of non-natural analogues, with simpler lipophilic environments of the alkynylcarbinol-based pharmacophoric units; (iii) the variation and optimization of both the pharmacophoric units and their lipophilic environment; and (iv) investigations into the biological mode of action of these unique structures.

Carbo-cyclohexadienes vs. carbo-benzenes: structure and conjugative properties

Ideally Cs-/C2v-symmetric chromophores, constituted by two electro-active groups conjugated through the carbo-mer of the cyclohexa-1,3-diene core, are selectively prepared by the SnCl2-mediated reduction of tailored hexaoxy-[6]pericyclynes: in the latter substrates, one of the 1,4-dioxybut-2-yne edges is "chemically locked" by two CF3 substituents preventing complete reduction to the corresponding aromatic carbo-benzenic core, which is expected to be more "π-insulating" between the electro-active ends. The bis-trifluoromethylated carbo-cyclohexadiene products are also shown to be significantly stabilized with respect to their bis-phenylated analogues. Their structural (crystal X-ray diffraction analyses), spectroscopical (NMR and UV-vis spectra), physio-optical (dichromism in solution) and electrochemical (cyclic voltammograms) properties are compared on the basis of the electron-donating/electron-withdrawing nature of the substituents. These properties are also compared with those of their aromatic carbo-benzene and flexible carbo-n-butadiene counterparts.

First example of ring carbomer of 1,4-cyclohexadiene

While a series of carbo-mers of 1,3-cyclohexadienes was reported through the use of a specifically developed synthetic strategy, no example of their 1,4-regioisomers was known. Inspired by the methodology elaborated for the preparation of the 1,3-isomers, the synthesis of the first example of carbo-mer of 1,4-cyclohexadiene is presented. Comparison of physico-chemical properties of this first representative with those of the recently described 1,4-regioisomer, especially UV-vis absorption properties, is also addressed.

“Carbo-aromaticity” and novel carbo-aromatic compounds

Recent advances in experimental and theoretical studies ofcarbo-benzene derivatives, along with the proposition of a generalization of the definition of aromaticity to the two-membered π-rings of triple bonds, suggest relevance for the notion of “carbo-aromaticity”.

First insights into the synthesis of carbo-phospholane and carbo-phospholene oxides

Fifteen-membered ring carbo-mers of five-membered rings are considered in the heterocyclic series of the phosphole oxide and less unsaturated parents. The synthesis of the first carbo-phospholane oxides is achieved by a [14+1] two-step/one-pot macrocyclization route with 86 % yield. Reduction of the latter phosphora-[5]pericyclyne with SnCl­2 allowed consistent 1H and 31P NMR characterization of the corresponding carbo-phospholene, produced with 11 % yield. The ultimate carbo-phosphole oxide could not be isolated, but preliminary results on alternative strategies towards this 14 pz-electron Hückel carbo-aromatic are reported.

En route to a dianilinyl-substituted carbo-cyclohexadiene with promising electrical properties

The macro-aromatic carbo-benzene core para-disubstituted by 4-anilinyl groups is known to be an efficient single-molecule conductor, exhibiting a conductance of 106 nS measured by the scanning tunneling microscopy-break junction technique. The linear carbo-butadiene analogue bearing the same anilinyl substituents was found to be less efficient, with a conductance of 2.7 nS. The reason of this difference could be elucidated through the study of the charge transport properties of a cyclically locked carbo-butadiene core in a carbo-cyclohexadiene derivative. In this paper, advances in the synthesis of this challenging dianilinyl-substituted carbo-cyclohexadiene are presented.

On terminal alkynylcarbinols and derivatization thereof

The chemistry of three prototypes of secondary alkynylcarbinols (ACs), recently highlighted as challenging targets in anti-tumoral medicinal chemistry, is further documented by results on n-alkyl, alkynyl and alkenyl representatives. The N-naphthyl carbamate of an n-butyl-AC is thus characterized by X-ray crystallography. A novel dialkynylcarbinol (DAC) with synthetic potential is described, namely the highly dissymmetrical triisopropylsilyl-protected version of diethynylmethanol. The latter is shown to act as a dipolarophile in a selective Huisgen reaction with benzyl azide under CuAAC click conditions, giving an alkenyl-AC, where the alkene unsaturation is embedded in a 1,4-disubstituted 1,2,3-triazole ring, as confirmed by X-ray crystallography.