Aromaticity Relocation in Perylene Derivatives upon Two-Electron Oxidation To Form Anthracene and Phenanthrene

Functionalization and solubilization of polycyclic aromatic compounds by sulfoniumization

Despite their unique physical properties and diverse applications in materials science, poor solubility of polycyclic aromatic hydrocarbons (PAHs) limits further fine-tuning and investigation of these systems. Herein, we report a sulfoniumization strategy to solubilize and functionalize a diverse range of PAHs in a one-step protocol using a triethylene glycol ether-substituted diaryl sulfoxide. While mono-sulfoniumization is generally observed, modification of the reaction conditions to favor bis-sulfoniumization is shown. The downstream applicability of the resulting PAH sulfonium salts is validated through a series of post-functionalization reactions that include C-C and C-heteroatom bond formation, while their application in annulative π-extension (APEX) is showcased by the synthesis of tetra-tert-butylquaterrylene from perylene. The red-shifted absorption and fluorescence, along with high water solubility of the PAH sulfonium salts, enable their application in bio-imaging, where they demonstrate selective mitochondrial staining without cytotoxicity.

B←N Lewis Pair-Functionalized Perylenes: Tuning Optoelectronic Properties via Regioisomerization

Herein, we report two peri-regioisomers of B←N Lewis pair-functionalized perylenes: the centrosymmetric PBNPf1 and the mirror-symmetric PBNPf2. Mirror-symmetric functionalization more effectively tunes the photoelectronic properties. The LUMO energy levels of PBNPf1 and PBNPf2 are stabilized to -3.00 eV and -3.30 eV. Additionally, the emission maxima of PBNPf1 and PBNPf2 are shifted to 574 and 628 nm, with fluorescence quantum yields of up to 96% and 87%, respectively.

A Multistep Oxidative Cascade Reaction from a Naphthalenediol-Based Pre-Ligand to a Tetranuclear Perylenequinone-Based FeIII Complex

We have developed a family of dinuclear complexes using 2,7-disubstituted 1,8-naphthalenediol ligands that bind by molecular recognition to two neighboring phosphate diesters of the DNA backbone with the dinuclear CuII and NiII complexes exhibiting a severe cytotoxicity for human cancer cells. To increase the binding affinity, we intended to synthesize the corresponding dinuclear FeIII complex. Surprisingly, we obtained a tetranuclear FeIII perylene-based complex instead of the expected dinuclear FeIII naphthalene-based complex. In order to establish a rational and reproducible synthesis, we carefully analyzed this reaction. This revealed a multistep oxidative cascade reaction including the pre-coordination of FeII ions in the N3-binding pockets, the Lewis-acid assisted MOM-deprotection of the pre-ligand by the pre-oriented FeII ions, two oxidative aromatic C-C coupling reactions, oxidation of the perylene-based backbone and of FeII to FeIII. The careful analysis of bond lengths, HOMA indices (harmonic oscillation model of aromaticity), FTIR and UV-Vis-NIR spectra supported by DFT calculations reveals the presence of an aromatic 18-electron oxidized perylenequinone ligand backbone. In summary, a multistep cascade reaction involving in total a 10-electron oxidation has been established for the straight-forward synthesis of an unprecedented perylenequinone-based ligand system.

In Silico Screening and Experimental Verification of Near-Infrared-Emissive Two-Boron-Doped Polycyclic Aromatic Hydrocarbons

Embedding two boron atoms into a polycyclic aromatic hydrocarbon (PAH) leads to the formation of a neutral analogue that is isoelectronic to the corresponding dicationic PAH skeleton, which can significantly alter its electronic structure. Based on this concept, we explore herein the identification of near-infrared (NIR)-emissive PAHs with the aid of an in silico screening method. Using perylene as the PAH scaffold, we embedded two boron atoms and fused two thiophene rings to it. Based on this design concept, all possible structures (ca. 2500 entities) were generated using a comprehensive structure generator. Time-dependent DFT calculations were conducted on all these structures, and promising candidates were extracted based on the vertical excitation energy, transition dipole moment, and atomization energy per bond. One of the extracted dithieno-diboraperylene candidates was synthesized and indeed exhibited emission at 724 nm with a quantum yield of 0.40 in toluene, demonstrating the validity of this screening method. This modification was further applied to other PAHs, and a series of thienobora-modified PAHs was synthesized.

Organic Binary and Ternary Cocrystal Engineering Based on Halogen Bonding Aimed at Room-Temperature Phosphorescence

Recently, there has been intense interest in pure organic room-temperature phosphorescence (ORTP) from cocrystals composed of 1,4-diiodotetrafluorobenzene (DITFB) and a variety of polycyclic aromatic hydrocarbons (PAHs) or their derivatives. To expand the possibility of halogen bonding-based cocrystals, the relationship between the crystal packing motifs and ORTP characteristics in binary cocrystals composed of DITFB and PAHs of phenanthrene (Phen), chrysene (Chry), and pyrene (Pyr), respectively, is investigated. The σ-hole···π and π-hole···π interactions determine not only the crystal packing motifs but also photoluminescence quantum yields (PLQYs). The Phen-DITFB and Chry-DITFB binary cocrystals with σ-hole···π interactions show higher PLQY compared with the Pyr-DITFB binary cocrystal with π-hole···π interaction. Further, to clarify the effect of crystal structures on PLQY, ternary cocrystals are prepared by partially doping Pyr into Phen-DITFB. The crystal packing motif of the ternary cocrystal originates from a Phen-DITFB cocrystal with σ-hole···π interaction, and some of the Phen sites are randomly replaced with Pyr molecules. The ORTP emission is derived from Pyr. The maximum PLQY is >20% due to suppressing nonradiative decay by changing the crystal packing motif.

Perylene-Based Coordination Polymers: Synthesis, Fluorescent J-Aggregates, and Electrochemical Properties

The incorporation of electroactive organic building blocks into coordination polymers (CPs) and metal-organic frameworks (MOFs) offers a promising approach for adding electronic functionalities such as redox activity, electrical conductivity, and luminescence to these materials. The incorporation of perylene moieties into CPs is, in particular, of great interest due to its potential to introduce both luminescence and redox properties. Herein, we present an innovative synthesis method for producing a family of highly crystalline and stable coordination polymers based on perylene-3,4,9,10-tetracarboxylate (PTC) and various transition metals (TMs = Co, Ni, and Zn) with an isostructural framework. The crystal structure of the PTC-TM CPs, obtained through powder X-ray diffraction and Rietveld refinement, provides valuable insights into the composition and organization of the building blocks within the CP. The perylene moieties are arranged in a herringbone pattern, with short distances between adjacent ligands, which contributes to the dense and highly organized framework of the material. The photophysical properties of PTC-Zn were thoroughly studied, revealing the presence of J-aggregation-based and monomer-like emission bands. These bands were experimentally identified, and their behavior was further understood through the use of quantum-chemical calculations. Solid-state cyclic voltammetry experiments on PTC-TMs showed that the perylene redox properties are maintained within the CP framework. This study presents a simple and effective approach for synthesizing highly stable and crystalline perylene-based CPs with tunable optical and electrochemical properties in the solid state.

Fragmentation route of doubly ionized benzene, aniline, and nitroanilines monomers using a novel protocol from density functional theory and QTAIM

The possibility of finding the fragmentation routes by theoretical methods led us to compare the molecular ions between neutral molecules of benzene, aniline, and o-, m-, and p-nitroaniline, using the density functional theory (DFT), under an aug-cc-pVDZ base set and a B3LYP exchange-correlation functional. After determining the structure and electronic energy of neutral and doubly ionized species, we used a new protocol based on analyzing Wiberg's binding indexes and the quantum theory of atoms in Bader molecules (QTAIM). The charge transfer and electronic distribution in aromatic monomers indicate the possibility of fragment formation in at least two pairs of carbon-carbon (CC) atoms. They show the possible loss of the -CNH₂ and -NO₂ groups in the aniline and nitroaniline molecules doubly ionized.

Frustrated Lewis pair chemistry of hydride sponges

An improved synthesis for 1,8-bis(dimethylboranyl)naphthalene (1, hydride sponge) was developed avoiding the use of tin(IV) reagents. The related 1,2-bis(dimethylboranyl)benzene (2) was prepared. 1 combined with 1,8-bis(dimethylamino)naphthalene (3, proton sponge) is a Frustrated Lewis pair (FLP) that forms adducts [1-EH_n-1][3-H] with the protic compounds EH_n = H₂O, NH₃, H₂S, PH₃, H₂Se, HCN. Their structures show the chelation of the deprotonated substrates, except for CN^- (binds to one B atom of 1). The mechanisms of formation of [1-EH_n-1][3-H] were explored by NMR spectroscopy. Similar reactions took places for the FLP system 2 + 3, but the adducts [2-EH_n-1][3-H] are less stable; only the PH₃ adduct was isolated and AsH₃ forms a chelated adduct [2-NC(CD₃)AsH₂][3-H]. FLP 1 + 3 does not react with molecular hydrogen, but the formal adduct [1-H][3-H] was isolated via salt metathesis from K[1-H] and [3-H]Cl; it is stable towards water, atmospheric oxygen and up to 100 °C; its thermal decomposition proceeds without formation of H₂. The stabilities of both, the mixture 1 + 3 + H₂ and the formal adduct [1-H][3-H], allow concluding that hydrogen activation of FLP 1 + 3 is kinetically prevented.

Bonding and uneven charge distribution in infinite pyrene π-stacks

Unusual intermolecular π-stacking in a new charge transfer salt of pyrene (Py), (Py)2+(Ga2Cl7)−, has been observed.

Non-conventional Behavior of a 2,1-Benzazaphosphole: Heterodiene or Hidden Phosphinidene?

The titled 2,1-benzazaphosphole (1) (i. e. ArP, where Ar=2-(DippN=CH)C6 H4 , Dipp=2,6-iPr2 C6 H3 ) showed a spectacular reactivity behaving both as a reactive heterodiene in hetero-Diels-Alder (DA) reactions or as a hidden phosphinidene in the coordination toward selected transition metals (TMs). Thus, 1 reacts with electron-deficient alkynes RC≡CR (R=CO2 Me, C5 F4 N) giving 1-phospha-1,4-dihydro-iminonaphthalenes 2 and 3, that undergo hydrogen migration producing 1-phosphanaphthalenes 4 and 5. Compound 1 is also able to activate the C=C double bond in selected N-alkyl/aryl-maleimides RN(C(O)CH)2 (R=Me, tBu, Ph) resulting in the addition products 7-9 with bridged bicyclic [2.2.1] structures. The binding of the maleimides to 1 is semi-reversible upon heating. By contrast, when 1 was treated with selected TM complexes, it serves as a 4e donor bridging two TMs thus producing complexes [μ-ArP(AuCl)2 ] (10), [(μ-ArP)4 Ag4 ][X]4 (X=BF4 (11), OTf (12)) and [μ-ArP(Co2 (CO)6 )] (13). The structure and electron distribution of the starting material 1 as well as of other compounds were also studied from the theoretical point of view.

Heavier element-containing aromatics of [4n+2]-electron systems

While the implication of the aromaticity concept has been dramatically expanded to date since its emergence in 1865, the classical [4n+2]/4n-electron counting protocol still plays an essential role in evaluating the aromatic nature of compounds. Over the last few decades, a variety of heavier heterocycles featuring the formal [4n+2] π-electron arrangements have been developed, which allows for assessing their aromatic nature. In this review, we present recent developments of the [4n+2]-electron systems of heavier heterocycles involving group 13-15 elements. The synthesis, spectroscopic data, structural parameters, computational data, and reactivity are introduced.

Direct borylation of terrylene and quaterrylene

The preparation of large rylenes often needs the use of solubilizing groups along the rylene backbone, and all the substituents of the terrylenes and quaterrylenes were introduced before creating the rylene skeleton. In this work, we successfully synthesized 2,5,10,13-tetrakis(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)terrylene (TB4) by using an iridium-catalyzed direct borylation of C–H bonds in terrylene in 56% yield. The product is soluble in common organic solvents and could be purified without column chromatography. Single crystal X-ray diffraction analysis revealed that the terrylene core is not disturbed by the substituents and is perfectly flat. The photophysical properties of TB4 are also unchanged by the substituents because the carbon atoms at 2,5,10,13-positions have less coefficients on its HOMO and LUMO, estimated by theoretical calculations. Finally, the same borylation reaction was applied for quaterrylene, resulting in the formation of soluble tetra-borylated quaterrylene despite a low yield. The post modification of rylenes enables us to prepare their borylated products as versatile units after creating the rylene skeletons.

Multiple Aromatic C-H Bond Activations by an Unsaturated Dirhenium Carbonyl Complex

Reactions of Re₂(CO)₈(μ-C₆H₅)(μ-H), 1, with naphthalene and anthracene have yielded the first multiply-CH activated arene products through the reductive elimination of benzene from 1 and multiple oxidative-additions of the dirhenium octacarbonyl grouping to these polycyclic aromatic compounds under very mild conditions. In addition, compound 1 was found to react with itself to yield the bis-Re₂-metalated C₆H₄ bridged compound Re₂(CO)₈(μ-H)(μ-1,μ-3-C₆H₄)Re₂(CO)₈(μ-H), 3. Reaction of 1 with naphthalene yielded two doubly CH activated isomers, Re₂(CO)₈(μ-H)(μ-η²-1,2-μ-η²-3,4-C₁₀H₆)Re₂(CO)₈(μ-H), 4, 41% yield, and Re₂(CO)₈(μ-H)(μ-η²-1,2-μ-η²-5,6-C₁₀H₆)Re₂(CO)₈(μ-H), 5, via the mono CH activated intermediate Re₂(CO)₈(μ-η²-C₁₀H₇)(μ-H), 2. Compound 4 contains two Re₂(CO)₈(μ-H) groups on one C₆ ring formed by CH activations at the 2- and 4-positions. Compound 5 contains two Re₂(CO)₈(μ-H) groups; one formed by CH activation at the 2-position on one C₆ ring and the other formed by CH activation at the 6-position (or centrosymmetrically related 2'-position) on the second C₆ ring. The Re₂(CO)₈(μ-H) groups are coordinated to the C₆ rings by binuclear σ + π coordination to two adjacent carbon atoms in the rings. Compound 1 reacts with anthracene to yield the mono-CH activated compound Re₂(CO)₈(μ-η²-1,2-C₁₄H₉)(μ-H), 6, and two doubly CH activated compounds, Re₂(CO)₈(μ-H)(μ-η²-1,2-μ-η²-3,4-C₁₄H₈)Re₂(CO)₈(μ-H), 7, and Re₂(CO)₈(μ-H)(μ-η²-1,2-μ-η²-5,6-C₁₄H₈)Re₂(CO)₈(μ-H), 8. Compounds 7 and 8 are isomers that are structurally similar to 4 and 5. Compounds 7 and 8 can also be obtained in good yields from the reaction of 6 with 1. In the presence of a 5/1 ratio of 1/anthracene, a small amount (5% yield) of the tetra-substituted anthracene product [Re₂(CO)₈(μ-H)]₄(μ-η²-1,2-μ-η²-3,4-μ-η²-5,6-μ-η²-7,8-C₁₄H₆), 9, was formed. Compound 9 contains four σ + π coordinated Re₂(CO)₈(μ-H) groups formed by oxidative additions of the CH bonds of anthracene to the Re₂(CO)₈ groups at the 2, 4, 6, and 8 positions of the three ring system. Molecular orbital calculations have been performed for all new compounds in order to develop an understanding of the bonding of the ring systems to the Re₂(CO)₈(μ-H) groups. All new compounds were characterized by single-crystal X-ray diffraction analyses.

Structurally Simple and Easily Accessible Perylenes for Dye-Sensitized Solar Cells Applicable to Both 1 Sun and Dim-Light Environments

The need for low-cost and highly efficient dyes for dye-sensitized solar cells under both the sunlight and dim light environments is growing. We have devised GJ-series push-pull organic dyes which require only four synthesis steps. These dyes feature a linear molecular structure of donor-perylene-ethynylene-arylcarboxylic acid, where donor represents N,N-diarylamino group and arylcarboxylic groups represent benzoic, thienocarboxylic, 2-cyano-3-phenylacrylic, 2-cyano-3-thienoacrylic, and 4-benzo[c][1,2,5]thiadiazol-4-yl-benzoic groups. In this study, we demonstrated that a dye without tedious and time-consuming synthesis efforts can perform efficiently. Under the illumination of AM1.5G simulated sunlight, the benzothiadiazole-benzoic-containing GJ-BP dye shows the best power conversion efficiency (PCE) of 6.16% with V_OC of 0.70 V and J_SC of 11.88 mA cm^-2 using liquid iodide-based electrolyte. It also shows high performance in converting light of 6000 lx light intensity, that is, incident power of ca. 1.75 mW cm^-2, to power output of 0.28 mW cm^-2 which equals a PCE of 15.79%. Interestingly, the benzoic-containing dye GJ-P with a simple molecular structure has comparable performance in generating power output of 0.26 mW cm^-2 (PCE of 15.01%) under the same condition and is potentially viable toward future application.