Supramolecular Hydro‐ and Ionogels: A Study of Their Properties and Antibacterial Activity

A Unique Case of 'in Situ' Bifluoride Triggered Formation of Supramolecular Organogels Using Isophthalamide Hydrogen Bond Donating Receptors

A novel isopthalamide based receptor H2L2 featuring two p-benzoic acid units has been synthesised and its anion binding properties analysed by 1H-NMR spectroscopy in DMSO-d6/0.5 % H2O. As expected, in the presence of tetrabutylammonium (TBA) fluoride the deprotonation of the carboxylic acid moieties was observed. However, the deprotonated receptor L22- was able to bind the in situ formed HF2 - via the formation of H-bonds with the amide NHs. When H2L2 was dissolved in THF and 4 equivalents of TBAF were added in CH3CN a unique sol-gel transition occurred giving rise to a stable thixotropic supramolecular gel. Theoretical calculations elucidated the gelation mechanism and strongly support the findings observed experimentally.

Fast and Efficient Sensing of Drugs in Water Using Self-Assembling D-Glucamine-Functionalized Naphthalenediimide and 1,8-Naphthalimide Fluorophores

Fast and sensitive quantification of drugs as emerging pollutants in water bodies is a pressing need in contemporary society, to prevent serious environmental concerns that could negatively impact on human health. This explains the surge of interest in this field, and the need to identify highly selective sensing systems. Addressing this issue, in this work we synthesized two D-glucamine functionalized fluorophores bearing self-assembling cores, as 1,8-naphthalimide and naphthalene diimide. We studied their self-assembly in water solution, and characterized the aggregated formed by determining their stability constant, their morphology and size by scanning electron microscopy, resonance light scattering and dynamic light scattering, as well their solid-state emission ability. Then, we studied their sensing ability, in water, towards pharmaceutically active compounds such as ciprofloxacin, nalidixic acid, carbamazepine and diclofenac sodium salt, by fluorescence investigation. Data collected show that the self-assembling ability is significantly affected by the fluorophore structure, which in turn also determines sensing ability. In particular, the naphtalene diimide-based probe was the most sensitive, with LOD as low as 0.01 μM in the presence of nalidixic acid, which is in line and competitive with more complex sensing systems, recently reported in the literature.

Roque A. Short Peptide and Amino Acid-Based Supramolecular Ionogels and Eutectogels

The capability of peptide and amino acid-based molecules to act as ionogelators and eutectogelators entrapping ionic liquids (ILs) and deep eutectic solvents (DESs) forming ionogels and eutectogels has gathered attention in recent decades. The self-assembly process, primarily driven by non-covalent interactions as hydrogen bonding, remains serendipitous in nature. This review provides a comprehensive and detailed report on self-assembly of unmodified and modified amino acids and peptides in the non-conventional solvents, ILs and DESs. Understanding these processes holds great promise for the development of innovative soft-materials, and to the progress of supramolecular systems in non-conventional solvent environments.

Effect of Amino Acid Types on the Mechanical and Antimicrobial Properties of Amino Acid-Based Polyionic Liquid Hydrogels

Polyionic liquid hydrogels attract increasing attention due to their unique properties and potential applications. However, research on amino acid-based polyionic liquid hydrogels is still in its infancy stage. Moreover, the effect of amino acid types on the properties of hydrogels is rarely studied to date. In this work, amino acid-based polyionic liquid hydrogels (D/L-PCAA hydrogels) are synthesized by copolymerizing vinyl choline-amino acid ionic liquids and acrylic acids using Al3+ as a crosslinking agent and bacterial cellulose (BC) as a reinforcing agent. The effects of amino acid types on mechanical and antimicrobial properties are systematically investigated. D-arginine-based hydrogel (D-PCArg) shows the highest tensile strength (220.7 KPa), D-phenylalanine-based hydrogel (D-PCPhe) exhibits the highest elongation at break (1346%), and L-aspartic acid-based hydrogel (L-PCAsp) has the highest elastic modulus (206.9 KPa) and toughness (1.74 MJ m-3). D/L-PCAsp hydrogels demonstrate stronger antibacterial capacity against Escherichia coli and Staphylococcus aureus, and D/L-PCPhe hydrogels possess higher antifungal activity against Cryptococcus neoformans. Moreover, the resultant hydrogels exhibit prominent hemocompatibility and low toxicity, as well as excellent self-healing capabilities (86%) and conductivity (2.8 S m-1). These results indicate that D/L-PCAA hydrogel provides a promise for applications in wound dressings.

Mxene-Based Supramolecular Composite Hydrogels for Antioxidant and Photothermal Antibacterial Activities

Bacterial infections and oxidative damage caused by various reactive oxygen species (ROS) pose a significant threat to human health. It is highly desirable to find an ideal biomaterial system with broad spectrum antibacterial and antioxidant capabilities. A new supramolecular antibacterial and antioxidant composite hydrogel made of chiral L-phenylalanine-derivative (LPFEG) as matrix and Mxene (Ti3 C2 Tx ) as filler material is presented. The noncovalent interactions (H-bonding and π-π interactions) in between LPFEG and Mxene and the inversion of LPFEG chirality are verified by Fourier transform infrared and circular dichroism spectroscopy. The composite hydrogels show improved mechanical properties revealed by rheological analysis. The composite hydrogel system exhibits photothermal conversion efficiency (40.79%), which enables effective photothermal broad-spectrum antibacterial activities against both Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli, Pseudomonas aeruginosa) bacteria. Furthermore, the Mxene also enables the composite hydrogel to exhibit excellent antioxidant activity by efficiently scavenging free radicals like DPPH•, ABTS•+, and •OH. These results indicate that the Mxene-based chiral supramolecular composite hydrogel, with improved rheological, antibacterial, and antioxidant properties has a great potential for biomedical applications.

Insights about the ability of folate based supramolecular gels to act as targeted therapeutic agents

With the aim to obtain targeted chemotherapeutic agents, imidazolium and ammonium-based folate salts were synthesized. Their photophysical behavior was investigated both in buffer and buffer/DMSO solution as well as in solid phase, performing UV-vis and fluorescence investigations. Properties of the aggregates were also analyzed by dynamic light scattering. Gelation ability of the salts was analyzed in biocompatible solvents, and gel phases obtained were characterized by determining critical gelation concentrations and gel-solution transition temperatures. Insights about gelator interactions in the tridimensional network were also gained performing ATR-FTIR investigation. Properties of soft materials were further analyzed performing rheology measurements, scanning electron microscopy, fluorescence and resonance light scattering investigations. Antiproliferative activity of organic salts was tested towards two breast cancer cell lines, expressing different levels of folate receptor, namely MDA-MB-231 and MCF-7, and a normal epithelial cell line, like h-TER T-RPE-1, by using MTT assay. Dichlodihydrofluorescein acetate test was performed to verify the role of oxidative stress in cell death. Finally, antiproliferative activity was also evaluated in gel phase, to verify if salts were able to retain biological activity also after the entrapment in the gelatinous network. Results collected evidence that folate based organic salts were able to behave as targeted chemotherapeutic agents both in solution and gel phase, showing uptake mechanism and selectivity indexes that depend on both cancer cell line nature and salt structure.

Naphthalimide Imidazolium-Based Supramolecular Hydrogels as Bioimaging and Theranostic Soft Materials

1,8-Naphthalimide-based imidazolium salts differing for the alkyl chain length and the nature of the anion were synthesized and characterized to obtain fluorescent probes for bioimaging applications. First, their self-assembly behavior and gelling ability were investigated in water and water/dimethyl sulfoxide binary mixtures. Only salts having longer alkyl chains were able to give supramolecular hydrogels, whose properties were investigated by using a combined approach of fluorescence, resonance light scattering, and rheology measurements. Morphological information was obtained by scanning electron microscopy. In addition, conductive properties of organic salts in solution and gel state were analyzed. Imidazolium salts were successfully tested for their possible application as bioimaging and cytotoxic agents toward three cancer cell lines and a nontumoral epithelial cell line. Characterization of their behavior was performed by MTT and cell-based assays. Finally, the biological activity of hydrogels was also investigated. Collectively, our findings showed that naphthalimide-based imidazolium salts are promising theranostic agents and they were able to preserve their biological properties also in the gel phase.

The effect of bisimidazolium-based ionic liquids on a bimolecular substitution process. Are two head(group)s better than one?

A homologous series of biscationic ionic liquids based on two imidazolium centres, separated by alkyl chains of varying length, were examined as solvents for a bimolecular substitution reaction across a range of proportions of ionic liquid in the reaction mixture. Their effects on the rate constant of the process were compared to monocationic ionic liquids, with generally a greater rate constant increase observed. Importantly, it was observed that the magnitude of the effect was shown to vary with the length of the linking chain. To investigate the origins of these solvent effects, temperature dependent kinetic studies were performed to obtain activation parameters at high and low mole fractions of ionic liquid. The observed activation parameters showed the rate constant enhancement was due to interaction of the ionic liquid with the starting materials, consistent with previous results. Significantly, however, these data also showed that the balance of enthalpic and entropic effects varied dramatically with the length of the alkyl chain between the cationic centres.

Supramolecular ionogels prepared with bis(amino alcohol)oxamides as gelators: ionic transport and mechanical properties

Supramolecular ionogels composed of an ionic liquid (IL) immobilized in a network of self-assembled low-molecular weight molecules have been attracting considerable interest due to their applicability as smart electrolytes for various electrochemical applications. Despite considerable scientific effort in this field, the design of a mechanically and thermally stable yet highly conductive supramolecular ionogels still remains a challenge. In this article, we report on a series of novel ionogels of three ILs containing different cations (imidazolium/pyrrolidinium) and anions (tetrafluoroborate/bis(trifluoromethylsulfonyl)imide) prepared using (S,S)-bis(amino alcohol)oxamides as gelators. The gelation behaviour of the oxamide compound depends strongly on the structural features of amino alcohol substituents. Among them, (S,S)-bis(valinol)oxamide (capable of gelling all three ILs) and (S,S)-bis(phenylalaninol)oxamide (capable of gelling ILs based on bis(trifluoromethylsulfonyl)imide with a concentration as low as ≈0.2 wt%) are highly efficient. All investigated supramolecular ionogels retain the high ionic conductivity and ion diffusion coefficients of their parent IL, even for high gelator concentrations. Further, at low temperatures we observe an enhancement of the ionic conductivity in ionogels of (i) 1-butyl-3-methylimidazolium tetrafluoroborate which can be attributed to specific interactions between ionic species and gelator molecules and (ii) 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide due to inhibited crystallization. In contrast to ionic transport, mechanical strength of the ionogels shows a wider variation depending on the type and concentration of the oxamide gelator. Among all the ionogels, that of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide prepared with 1 wt% (S,S)-bis(phenylalaninol)oxamide exhibits the best performance: optical transparency, stability over a wide temperature range, high conductivity and high mechanical strength. The results presented here reveal the versatile nature of bis(amino alcohol)oxamides as gelators and their high potential for preparing functionalized IL-based materials.

Antimicrobial Activity with Enhanced Mechanical Properties in Phenylalanine-Based Chiral Coassembled Hydrogels: The Influence of Pyridine Hydrazide Derivatives

Hydrazide derivatives are known to display a wide range of biological properties including antimicrobial activities, hence making them desirable candidates for soft biomaterials. Herein, we report chiral supramolecular coassembled hydrogels obtained from two phenylalanine gelators (L/DPF and B2L/D) and two dicarbohydrazide molecules (pyridine-2,6-dicarbohydrazide (PDH) and (2,2'-bipyridine)-5,5'-dicarbohydrazide (BDH)) that exhibited enhanced mechanical properties, chirality modulation, and antimicrobial activity. Four lines of coassembled hydrogels were obtained (i.e., L/DPF-PDH, L/DPF-BDH, B2L/D-PDH, and B2L/D-BDH) through hydrogen bonding and π-π stacking with some level of an interpenetrating network, as revealed by the structural characterization analysis. Mechanical properties were significantly improved, especially in the case of hybrid gels involving BDH, with improved average elastic modulus (G') values of 3430 and 3167 Pa for DPF-BDH and B2D-BDH (1:3, molar concentration) over 140 and 1680 Pa for DPF and B2D gelators, respectively. This was attributed to the improved π-π stacking and interpenetrating network due to the bipyridine group and its ease to form fibrous precipitates in the process of heating and cooling to room temperature. PDH, on the other hand, was able to modulate chirality in the L/DPF gelator due to its more planar and less bulky nature and showed antimicrobial activity against Pseudomonas aeruginosa (Gram-negative). Interestingly, when PDH was coassembled with the B2L/D gelator, the hybrid gels exhibited antimicrobial activity against Staphylococcus aureus (Gram-positive) and P. aeruginosa (Gram-negative) by virtue of a synergistic effect of the gelator and the azomethine group of PHD. Hence, by moving from bipyridine (BDH) to pyridine (PDH) as a core structure in the hydrazide molecules, the resulting hybrid hydrogels exhibited desirable properties of antimicrobial activity and improved mechanical attributes.

Polyanionic Composite Membranes Based on Bacterial Cellulose and Amino Acid for Antimicrobial Application

Ideal wound dressing materials should be active components in the healing process. Bacterial cellulose (BC) has attracted a great deal of attention as novel wound dressing materials; however, it has no intrinsic antimicrobial activity. To explore the practical application values of BC and develop novel wound dressing materials, a series of composite membranes based on BC and polymeric ionic liquids (BC/PILs, composed of BC, and PILs formed by choline and different amino acids) with antimicrobial activity were synthesized by an ex situ method. The physicochemical and antimicrobial properties and biocompatibility of these membranes were systematically investigated. The results indicated that BC/PIL membranes with excellent properties could be obtained by adjusting the concentration and type of PILs. Several kinds of BC/PIL membranes exhibited good biocompatibility and high antimicrobial activity against Gram-positive and Gram-negative bacteria and fungus. The anionic PILs played important roles in the antimicrobial activity of BC/PIL membranes. The obtained membranes provided a novel promising candidate for wound dressing materials.

Sulfonamide as amide isostere for fine-tuning the gelation properties of physical gels

(S)-2-Stearamidopentanedioic acid (C18-Glu) is a known LMW gelator that forms supramolecular gels in a variety of solvents. In this work, we have carried out the isosteric substitution of the amide group by a sulfonamide moiety yielding the new isosteric gelator (S)-2-(octadecylsulfonamido)pentanedioic acid (Sulfo-Glu). The gelation ability and the key properties of the corresponding gels were compared in terms of gelation concentration, gel-to-sol transition temperature, mechanical properties, morphology, and gelation kinetics in several organic solvents and water. This comparison was also extended to (S)-2-(4-hexadecyl-1H-1,2,3-triazol-4-yl)pentanedioic acid (Click-Glu), which also constitutes an isostere of C18-Glu. The stabilizing interactions were explored through computational calculations. In general, Sulfo-Glu enabled the formation of non-toxic gels at lower concentrations, faster, and with higher thermal-mechanical stabilities than those obtained with the other isosteres in most solvents. Furthermore, the amide-sulfonamide isosteric substitution also influenced the morphology of the gel networks as well as the release rate of an embedded antibiotic (vancomycin) leading to antibacterial activity in vitro against Staphylococcus aureus.

Structure Evolution of Epoxidized Natural Rubber (ENR) in the Melt State by Time-Resolved Mechanical Spectroscopy

In this work, time-resolved mechanical spectroscopy (TRMS) was used to accurately characterize the rheological behavior of an epoxidized natural rubber (ENR) containing 25 mol% of epoxy groups. Conventional rheological tests are not suitable to characterize with accuracy the frequency-dependent linear viscoelastic behavior of materials, such as ENR, in a transient configurational state. For this reason, TRMS was used to determine the true rheological behavior of ENR, as well as to gain some insights into the changes of its macromolecular architecture under the dynamic conditions experienced during the measurements. The constructed master curves for the moduli revealed a gradual transition of the ENR rheological state from liquid-like to solid-like through the formation of an “elastic gel” throughout the bulk of the polymer. Furthermore, the evolution of the stress relaxation modulus revealed a slow relaxation mechanism, resulting from thermally activated reactions in the molten state attributed to the formation of crosslinks. Finally, the crosslink density evolution was estimated from the TRMS data and compared with results derived from equilibrium solvent-swelling measurements. These demonstrated the accuracy of the TRMS data in the prediction of the structural changes that can take place in polymers during processing.

Hexadecyl-Containing Organic Salts as Novel Organogelators for Ionic, Eutectic, and Molecular Liquids

The incorporation of a hexadecyl group on imidazolium, pyridinium, and pyrrolidinium scaffolds produces low-molecular-weight ionic organogelators that can gel several types of ionic liquids, deep eutectic solvents (DESs), and several molecular organic solvents. Minimum gelator concentrations fall in the 0.9-15.0% (w/v) range, with the lower end of the gelator concentrations observed in the gelation of DESs. On the basis of polarized optical microscopy, differential scanning calorimetry, and X-ray data, crystallization of these salts appear to produce high-surface-area crystals, which generate sufficiently stable three-dimensional networks that are capable of trapping the solvent molecules. Importantly, the nature of the fluid component of the gel appears to have a profound effect on the morphology of the crystallized organogelators. On the other hand, the organogelators appeared to modulate phase transitions of the liquids.

Multifunctional Carrier Based on Halloysite/Laponite Hybrid Hydrogel for Kartogenin Delivery

A novel carrier system based on halloysite nanotubes (HNT), for the potential intraarticular delivery of kartogenin (KGN) by means laponite (Lap) hydrogel (HNT/KGN/Lap), is developed. The drug was first loaded into HNT, and the hybrid composite obtained was used as filler for laponite hydrogel. Both the filler and the hydrogel were thoroughly investigated by several techniques and the hydrogel morphology was imaged by transmission electron microscopy. Furthermore, the gelating ability of laponite in the presence of the filler and the rheological properties of the hybrid hydrogel were also investigated. The kinetic release of kartogenin from HNT and HNT/Lap hybrid hydrogel was studied both in physiological conditions and in ex vivo synovial fluid. In the last case, the kinetic results highlighted that HNT carrier can effectively release KGN in a sustained manner for at least 38 days. Finally, a preliminary biological assays showed that the HNT/KGN/Lap hybrid hydrogel did not exhibit any cytotoxic effect.

Dicyclohexylurea derivatives of amino acids as dye absorbent organogels and anion sensors

Dicyclohexyl urea (DCU) derivatives of amino acids Fmoc-Phe-DCU (M1), Fmoc-Phg-DCU (M2) and Fmoc-Gaba-DCU (M3) have been shown to form phase selective, thermoreversible and mechanically robust gels in a large range of organic solvents. This is the first report of low molecular weight gelators (LMWG) from DCU derivatives of amino acids. The self-assembly mechanism of the organogels has been probed using concentration dependent 1H NMR, DMSO titration 1H NMR, fluorescence, FTIR, PXRD and FESEM techniques. Self-assembly leading to gelation process is mainly driven by hydrophobicity and π-π stacking interactions in between Fmoc groups. Interestingly, the gels can absorb several kinds of organic dyes efficiently and can be reused for dye absorption for multiple cycles. Additionally, M1-M3 act as sensors for anions like fluoride, acetate and hydroxide, for which they have specific fluorescence response. Gel formation by M1-M3 is completely arrested in the presence of fluoride. The possible binding mode of fluoride has been delineated using DFT studies. Calculations suggest, involvement of urea NH in a six membered intramolecular hydrogen bond, rendering it unavailable for fluoride binding. Backbone -NH of the amino acids of M1-M3 is responsible for fluoride binding. The reported small, economically viable, synthetically facile molecules not only enrich the repertoire of LMWG molecules, but can have multifaceted applications.

Facile Fabrication of a Self-Healing Temperature-Sensitive Sensor Based on Ionogels and Its Application in Detection Human Breath

The biocompatible strechable ionogels were prepared by a facile solution-processed method. The ionogels showed outstanding stretchable and self-healing properties. The electrical property could revert to its original state after 4 s. The repaired ionogels could still bear stretching about 150%. Moreover, the ionogels exhibited high sensitivity and wide-detection range to temperature. The temperature-sensitive sensor could detect the human breath frequency and intensity, showing potential application in detecting disease.

Rational Approach Towards Designing Metallogels From a Urea-Functionalized Pyridyl Dicarboxylate: Anti-inflammatory, Anticancer, and Drug Delivery

A structural rationale was adopted to design a series of metallogels from a newly synthesized urea-functionalized dicarboxylate ligand, namely, 5-[3-(pyridin-3-yl)ureido]isophthalic acid (PUIA), that produces metallogels upon reaction with various metal salts (Cu^II , Zn^II , Co^II , Cd^II , and Ni^II salts) at room temperature. The gels were characterized by dynamic rheology and transmission electron microscopy (TEM). The existence of a coordination bond in the gel state was probed by FTIR and ¹ H NMR spectroscopy in a Zn^II metallogel (i.e., MG2). Single crystals isolated from the reaction mixture of PUIA and Co^II or Cd^II salts characterized by X-ray diffraction revealed lattice inclusion of solvent molecules, which was in agreement with the hypothesis based on which the metallogels were designed. MG2 displayed anti-inflammatory response (prostaglandin E₂ assay) in the macrophage cell line (RAW 264.7) and anticancer properties (cell migration assay) on a highly aggressive human breast cancer cell line (MDA-MB-231). The MG2 metallogel matrix could also be used to load and release (pH responsive) the anticancer drug doxorubicin. Fluorescence imaging of MDA-MB-231 cells treated with MG2 revealed that it was successfully internalized.

Ionic liquids gels: Soft materials for environmental remediation

HYPOTHESIS

Nanostructured sorbents and, in particular, supramolecular gels are emerging as efficient materials for the removal of toxic contaminants from water, like industrial dyes. It is also known that ionic liquids can dissolve significant amounts of dyes. Consequently, supramolecular ionic liquids gels could be highly efficient sorbents for dyes removal. This would also contribute to overcome the drawbacks associated with dye removal by liquid-liquid extraction with neat ionic liquids which would require large volumes of extractant and a more difficult separation of the phases.

EXPERIMENTS

Herein we employed novel supramolecular ionic liquid gels based on diimidazolium salts bearing naturally occurring or biomass derived anions, to adsorb cationic and anionic dyes from wastewaters. We also carried out a detailed investigation of thermal, structural, morphological and rheological features of our gels to identify which of them are key in designing better sorbents for environmental remediation.

FINDINGS

The most effective gels showed fast and thorough removal of cationic dyes like Rhodamine B. These gels could also be reused up to 20 times without any loss in removal efficiency. Overall, our ionic gels outperform most of gel-based sorbents systems so far reported in literature.