Di(hydroperoxy)alkane Adducts of Phosphine Oxides: Safe, Solid, Stoichiometric, and Soluble Oxidizing Agents

Surface-Assisted Selective Air Oxidation of Phosphines Adsorbed on Activated Carbon

Trialkyl- and triarylphosphines readily adsorb onto the surface of porous activated carbon (AC) even in the absence of solvents through van der Waals interactions between the lone electron pair and the AC surface. This process has been proven by solid-state NMR techniques. Subsequently, it is demonstrated that the AC enables the fast and selective oxidation of adsorbed phosphines to phosphine oxides at ambient temperature in air. In solution, trialkylphosphines are oxidized to a variety of P(V) species when exposed to the atmosphere, while neat or dissolved triarylphosphines cannot be oxidized with air. When the trialkyl- and triarylphosphines PnBu3 (1), PEt3, (2), PnOct3 (3), PMetBu2 (4), PCy3 (5), and PPh3 (6) are adsorbed in a mono- or submonolayer on the surface of AC, in the absence of a solvent and at ambient temperature, they are quantitatively oxidized to the adsorbed phosphine oxides, 1ox-6ox, once air is admitted. No formation of any unwanted P(V) side products or water adducts is observed. The phosphine oxides can then be recovered in good yields by washing them off of the AC. The oxidation is likely facilitated by a radical activation of molecular oxygen due to delocalized electrons on the aromatic surface coating of AC, as proven by ESR. This easy and inexpensive oxidation method renders hydrogen peroxide or other oxidizers unnecessary and is broadly applicable to sterically hindered and even to air-stable triarylphosphines. Phosphines adsorbed at lower surface coverages on AC oxidize at a faster rate. All oxidation reactions were monitored by solution- and solid-state NMR spectroscopy.

Atom-economical synthesis of 1,2-bis(phosphine oxide)ethanes from calcium carbide with straightforward access to deuterium- and 13C-labeled bidentate phosphorus ligands and metal complexes

Straightforward access to bidentate phosphorus ligands and bis(phosphineoxide)ethanes is described based on atom-economic addition reaction. A practical approach was developed to incorporate 2H and 13C labels using easily available reagents.

Molecular Dynamics and Surface Interactions of Nickelocene Adsorbed on Silica: A Paramagnetic Solid-State NMR Study

When grinding nickelocene with silica in the absence of a solvent at room temperature, it adsorbs on the surface within the pores. This has also been demonstrated visually by adsorbing green nickelocene in the pores of a large colorless silica gel specimen. While this dry adsorption and translational mobility of nickelocene within the pores is proven visually, the site-to-site mobility of the nickelocene molecules and their orientation toward the surface are not yet understood. In this contribution, mesoporous silica is used as the support material for a systematic solid-state NMR study of these issues. Paramagnetic ¹H VT solid-state NMR and T₁ relaxation times have been powerful tools for studying the dynamics of nickelocene on the silica surface. Herewith, the mobility of the surface-adsorbed nickelocene molecules in the pores could be quantified on the molecular scale. According to the obtained data, the nickelocene molecules move like a liquid on the surface. Isotropically moving molecules exchange places rapidly with surface-attached molecular states of nickelocene in a sample with submonolayer surface coverage. This finding is corroborated by a macroscopic visualization experiment. The states of the surface-attached horizontally oriented nickelocene molecules that are prevalent at temperatures below 200 K have been quantified. The temperature dependencies of the rate k in coordinates of ln(k) versus 1/T and ln(k/T) versus 1/T form ideal straight lines that allow the determination of the kinetic parameters E_act = 5.5 kcal/mol, A = 1.1 × 10¹⁰, ΔH^‡ = 5.0 kcal/mol, and ΔS^‡ = -15 eu. Investigating a sample with equal amounts of nickelocene and ferrocene in a submonolayer amount of 80% overall surface coverage shows that the different metallocenes mix on the molecular level on the silica surface.

Triphenyllead Hydroperoxide: A 1D Coordination Peroxo Polymer, Single-Crystal-to-Single-Crystal Disproportionation to a Superoxo/Hydroxo Complex, and Application in Catalysis

The synthesis, transformation, and application in catalysis of triphenyllead hydroperoxide, the first dioxygen lead complex, are described. Triphenyllead hydroperoxide is characterized by ²⁰⁷Pb nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, and single-crystal X-ray diffraction, revealing the first one-dimensional (1D) coordination peroxo polymer. Photolytic isomorphous transformation of Ph₃PbOOH yields a mixed hydroxo/superoxo crystalline structure, the first nonalkali superoxo crystalline metal salt, which is stable up to 100 °C. Upon further photolysis, another isomorphous transformation of the superoxide to hydroxide is observed. These are the first single-crystal-to-single-crystal hydroperoxide-to-superoxide and then to hydroxide transformations reported to date. Photolysis of triphenyllead hydroperoxide yields two forms of superoxide-doped crystalline structures that are distinguished by widely different characteristic relaxation times. The use of Ph₃PbOOH as an easy-to-handle solid two-electron oxidant for the highly enantioselective epoxidation of olefins is described.

Non-covalent interactions of the hydroperoxo group in crystalline adducts of organic hydroperoxides and their potassium salts

X-ray diffraction of three new stable cocrystals of potassium salts of organic hydroperoxides with molecular hydroperoxides reveals strong charge-assisted ROO−⋯HOOR H-bonds.

Di(hydroperoxy)adamantane adducts: synthesis, characterization and application as oxidizers for the direct esterification of aldehydes

The di(hydroperoxy)adamantane adducts of water (1) and phosphine oxides p-Tol₃PO·(HOO)₂C(C₉H₁₄) (2), o-Tol₃PO·(HOO)₂C(C₉H₁₄) (3), and Cy₃PO·(HOO)₂C(C₉H₁₄) (4), as well as a CH₂Cl₂ adduct of a phosphole oxide dimer (8), have been created and investigated by multinuclear NMR spectroscopy, and by Raman and IR spectroscopy. The single crystal X-ray structures for 1-4 and 8 are reported. The IR and ³¹P NMR data are in accordance with strong hydrogen bonding of the di(hydroperoxy)adamantane adducts. The Raman ν(O-O) stretching bands of 1-4 prove that the peroxo groups are present in the solids. Selected di(hydroperoxy)alkane adducts, in combination with AlCl₃ as catalyst, have been applied for the direct oxidative esterification of n-nonyl aldehyde, benzaldehyde, p-methylbenzaldehyde, p-bromobenzaldehyde, and o-hydroxybenzaldehyde to the corresponding methyl esters. The esterification takes place in an inert atmosphere, under anhydrous and oxygen-free conditions, within a time frame of 45 minutes to 5 hours at room temperature. Hereby, two oxygen atoms per adduct assembly are active with respect to the quantitative transformation of the aldehyde into the ester.

Luminescence property of phosphoramidic acid oligomer nanodots in aqueous solution

Luminescent polymer dots have showed great potential applications in chemical sensing and bioimaging. Herein, phosphoramidic acid oligomers in aqueous solution can form nanodots (ONDs) with mean diameter of 50 ~ 60 nm. The ONDs display blue fluorescence of excitation-dependence and the fluorescence quantum yields can reach 4.16% to 9.71% under the maximum excitation and emission wavelengths. The steady and dynamic fluorescence quenching experiments by iodide ion show that the luminescence of ONDs originates to charge transfer (CT). The calculation on distribution of HOMO and LUMO of ONDs in monomer and dimer states supports further the CT mechanism, and the separated and localized distribution of HOMO and LUMO provides possible explanation on the excitation wavelength dependent luminescence based on internal and external CT. It is expected that the luminescent ONDS are useful in chemical or biological sensing fields.

Di(hydroperoxy)cycloalkane Adducts of Triarylphosphine Oxides: A Comprehensive Study Including Solid-State Structures and Association in Solution

Four new di(hydroperoxy)cycloalkane adducts (Ahn adducts) of p-Tol₃PO (1) and o-Tol₃PO (2), namely, p-Tol₃PO·(HOO)₂C(CH₂)₅ (3), o-Tol₃PO·(HOO)₂C(CH₂)₅ (4), p-Tol₃PO·(HOO)₂C(CH₂)₆ (5), and o-Tol₃PO·(HOO)₂C(CH₂)₆ (6), have been synthesized and fully characterized. Their single crystal X-ray structures have been determined and analyzed. The ³¹P NMR data are in accordance with hydrogen bonding of the di(hydroperoxy)alkanes to the P═O groups of the phosphine oxides. Due to their high solubility in organic solvents, natural abundance ¹⁷O NMR spectra of 1-6 could be recorded, providing the signals for the P═O groups and additionally the two different oxygen nuclei in the O-OH groups in the adducts 3-6. The association and mobility of 3-6 were explored by ¹H DOSY (diffusion ordered spectroscopy) NMR, which indicated persistent hydrogen bonding of the adducts in solution. Competition experiments with phosphine oxides allowed ranking of the affinities of the di(hydroperoxy)cycloalkanes for the different phosphine oxide carriers. On the basis of variable temperature ³¹P NMR investigations, the Gibbs energies of activation ΔG^‡ for the adduct dissociation processes of 3-6 at different temperatures, as well as the enthalpy ΔH^‡ and entropy ΔS^‡ of activation, have been determined. IR spectroscopy of 3-6 corroborated the hydrogen bonding, and in the Raman spectra, the ν(O-O) stretching bands have been identified, confirming the presence of peroxy groups in the solid materials. The high solubilities in selected organic solvents have been quantified.

Disentangling different modes of mobility for triphenylphosphine oxide adsorbed on alumina

Triphenylphosphine oxide (TPPO, 1) has been adsorbed on neutral alumina by dry grinding of the components in the absence of a solvent. The adsorption proves translational mobility of 1 on the surface of alumina. Different surface coverages from a densely packed monolayer (99% coverage) to a dilute sub-monolayer (25%) have been produced. The samples have been studied by diverse multinuclear ¹H, ¹³C, and ³¹P variable temperature solid-state nuclear magnetic resonance (NMR) techniques. The interactions of 1 with the surface are determined by hydrogen bonding of the P=O group to OH groups on the surface. The ³¹P solid-state NMR spectra prove that even at low temperatures, the molecules of 1 are highly mobile on the surface. Using T₁ and T₂ relaxation time analyses of the ³¹P resonance in the solid state at variable temperatures allowed the identification and quantification of two different modes of mobility. Besides the translational mobility that consists of jumps from one hydrogen-bonding OH site on the surface to an adjacent one, a rotational movement around the axis defined by the P=O group of 1 occurs.

Hydrogen peroxide adducts of triarylphosphine oxides

Five new hydrogen peroxide adducts of phosphine oxides (p-Tol₃PO·H₂O₂)₂ (1), (o-Tol₃PO·H₂O₂)₂ (2), (o-Tol₂PhPO·H₂O₂)₂ (3), (p-Tol₃PO)₂·H₂O₂ (4), and (o-TolPh₂PO)₂·H₂O₂ (5), and the water adduct (o-Tol₂PhPO·H₂O)₂ (6) have been synthesized and fully characterized. Their single crystal X-ray structures have been determined and analyzed. The IR and ³¹P NMR data are in accordance with strong hydrogen bonding of the hydrogen peroxide. The mono- versus dimeric nature of the adduct assemblies has been investigated by DOSY NMR experiments. Raman spectroscopy of the symmetric adducts and the ν(O-O) stretching bands confirm the presence of hydrogen-bonded hydrogen peroxide in the solid materials. The solubilities in organic solvents have been quantified. Due to the high solubilities of 1-6 in organic solvents their ¹⁷O NMR spectra could be recorded in natural abundance, providing well-resolved signals for the P[double bond, length as m-dash]O and O-O groups. The adducts 1-5 have been probed regarding their stability in solution at 105 °C. The decomposition of the adduct 1 takes place by loss of the active oxygen atoms in two steps.

Structures and Dynamics of Secondary and Tertiary Alkylphosphine Oxides Adsorbed on Silica

The three secondary phosphine oxides [CH₂ =CH(CH₂ )₄ ]₂ HPO (1), [CH₂ =CH(CH₂ )₅ ]₂ HPO (2), and [CH₂ =CH(CH₂ )₆ ]₂ HPO (3), and two diphosphine dioxides, {[CH₂ =CH(CH₂ )₆ ]₂ PO(CH₂ )₇ }₂ (4) and {[CH₂ =CH(CH₂ )₆ ]₂ PO(CH₂ )₄ }₂ (5), incorporating long methylene chains, are described. The single crystal X-ray structures of 1, 2, and 5 have been determined. The phosphine oxides 3, 4, and 5 have been adsorbed on silica in submonolayer quantities to give 3 a-5 a. The ¹ H, ¹³ C, and ³¹ P solid-state NMR spectra of polycrystalline 3-5 have been analyzed and compared with those of 3 a-5 a. The changes of the solid-state NMR characteristics upon adsorption and the surface mobilities of the phosphine oxides are discussed.

Selective synthesis and stabilization of peroxides via phosphine oxides

MEKPO (methyl ethyl ketone peroxide) and other peroxides can be synthesized selectively and stabilized as hydrogen-bonded phosphine oxide adducts.

Phosphine oxide-based tricarbonylrhenium(i) complexes from phosphine/phosphine oxide and dihydroxybenzoquinones

Neutral phosphine oxide (P[double bond, length as m-dash]O) donor-based organometallic complexes [{Re(CO)3O[double bond, length as m-dash]PCy3}{μ-DHBQ}{Re(CO)3O[double bond, length as m-dash]PCy3}] (1), [{Re(CO)3O[double bond, length as m-dash]PPh3}{μ-DHBQ}{Re(CO)3O[double bond, length as m-dash]PPh3}] (2), [{Re(CO)3O[double bond, length as m-dash]PCy3}{μ-THQ}{Re(CO)3O[double bond, length as m-dash]PCy3}] (3), [{Re(CO)3O[double bond, length as m-dash]PPh3}{μ-THQ}{Re(CO)3O[double bond, length as m-dash]PPh3}] (4), [{Re(CO)3O[double bond, length as m-dash]PCy3}{μ-CA}{Re(CO)3O[double bond, length as m-dash]PCy3}] (5), and [{Re(CO)3O[double bond, length as m-dash]PPh3}{μ-CA}{Re(CO)3O[double bond, length as m-dash]PPh3}] (6) were assembled from phosphine/phosphine oxide, a dihydroxybenzoquinone donor and Re2(CO)10via a one-pot solvothermal approach. The soft phosphine donor was transformed into a hard phosphine oxide donor during the formation of 1, 3, 4, 5, and 6. The complexes 1-6 were air and moisture stable and were soluble in polar organic solvents. The complexes were characterized by elemental analysis, FT-IR, and NMR spectroscopic methods. The molecular structures of 1, 2, 4, and 6 were analyzed by single-crystal X-ray diffraction analysis. The UV-Visible absorption studies indicated that 1-6 in THF display strong visible light absorption in the range of ∼350-700 nm.