Designing Metallic MoO 2 Nanostructures on Rigid Substrates for Electrochemical Water Activation

Mo2C/C catalyst as efficient peroxymonosulfate activator for carbamazepine degradation

Compared with generally reported Mo⁴⁺/Mo⁶⁺ redox cycle, the exposed Mo²⁺ active sites of Mo-based materials may have a superior potential to effectively activate PMS. However, Mo²⁺-involved materials as efficient catalysts in sulfate radical-based advanced oxidation processes (SR-AOPs) has rarely been researched. In this work, a spherical Mo₂C-loaded carbon material, Mo₂C/C, was prepared for the first time by hydrothermal-calcination method directly used as peroxymonosulfate (PMS) activator towards carbamazepine (CBZ) degradation. The results showed that the Mo₂C/C could effectively remove nearly 100% CBZ (5 mg·L^-1) in the presence of 0.75 mM PMS within 75 min under the optimal conditions. It was attributed to the reductive Mo²⁺, as active sites, benefits to absorb PMS on the surface to trigger electron transmission, and the defective carbon structures accelerate the activation of PMS. Consequently, the efficient Mo²⁺/Mo⁴⁺/Mo⁶⁺ electron transfer was achieved, resulting in excellent catalysis. A series of reactive species including SO₄^-, OH and ¹O₂ species participated in CBZ oxidation degradation. Derived from the superior stability and reusability of Mo₂C/C, the removal rate of CBZ still maintained above 80% even after five consecutive cycles, which is expected to be applied in the wastewater treatment including pharmaceuticals in the future.

Molybdenum-tungsten Oxide Nanowires Rich in Oxygen Vacancies as An Advanced Electrocatalyst for Hydrogen Evolution

Electrolysis of water is a promising way to produce hydrogen fuel in large scale. The commercialization of this technology requires highly efficient non-noble metal electrocatalysts to decease the energy input for the hydrogen evolution reaction (HER). In this work, a novel nanowire structured molybdenum-tungsten bimetallic oxide (CTAB-D-W₄ MoO₃ ) is synthesized by a simple hydrothermal method followed with post annealing treatment. The obtained metal oxides feature with enhanced conductivity, rich oxygen vacancies and customized electronic structure. As such, the composite electrocatalyst exhibits excellent electrocatalytic performance for HER in an acidic environment, achieving a large current density of 100 mA cm^-2 at overpotential of only 286 mV and a small Tafel slope of 71.2 mV dec^-1 . The excellent electrocatalytic HER performance of CTAB-D-W₄ MoO₃ is attributed to the unique nanowire structure, rich catalytic active sites and promoted electron transfer rate.

FeNi3-modified Fe2O3/NiO/MoO2 heterogeneous nanoparticles immobilized on N, P co-doped CNT as an efficient and stable electrocatalyst for water oxidation

As a rate-determining step, electrocatalytic water oxidation acts a pivotal role in the water splitting process. As a consequence, it is of great significance to explore low-cost, efficient and durable electrocatalysts for the oxygen evolution reaction (OER) to promote electrocatalytic splitting water. Herein, for the first time, FeNi₃-modified Fe₂O₃/NiO/MoO₂ heterogeneous nanoparticles immobilized on N, P co-doped CNT matrix materials (FNM/NPCNT) are synthesized via a facile solid-phase grinding of the precursor, composed of nickel hexacyanoferrate/phosphomolybdic acid/CNT, and subsequently pyrolyzing under nitrogen atmosphere without any further post-processing. Due to its significant enhancement of the charge transfer efficiency and prevention of the metallic-based catalysts from being corroded, the as-prepared FNM/NPCNT hybrid electrocatalyst shows a high OER activity with a low overpotential of 282 mV vs. RHE at 10 mA cm^-2 and a small Tafel slope of 46.2 mV dec^-1 in an alkaline electrolyte. Moreover, the as-prepared FNM/NPCNT hybrid delivers a large mass activity of 327.6 A g^-1 at the potential of 1.7 V and excellent stability (more than 20 h). This study opens up a new approach to design and synthesize non-precious transition metal-based composites immobilized N, P co-doped CNT materials as OER catalysts with high efficiency and long-term stability for promoting water splitting.

Synthesis and characterization of vanadium-doped Mo(O,S)2 oxysulfide for efficient photocatalytic degradation of organic dyes

We developed simple and low cost synthesis methods at low temperature to synthesize V-doped Mo(O,S)₂ for the photocatalytic degradation of dyes.

Improving the photo-cathodic properties of TiO2 nano-structures with graphdiynes

GD∼GDO/TiO₂ nanostructure with improved photocathodic activity.