Electronic, Structural and Functional Versatility in Tetrathiafulvalene-Lanthanide Metal-Organic Frameworks

A redox active rod coordination polymer from tetrakis(4-carboxylic acid biphenyl)tetrathiafulvalene

An enlarged version of the ubiquitous tetrathiafulvalene-tetrabenzoic acid is described, with 4,4'-biphenyl moieties as spacers between the coordination moieties and the electroactive core. The obtained rectangular ligand has a 14 × 22 Å2 size and is combined with Zn(II) under solvothermal conditions to yield a coordination polymer endowed with large cavities of ca. 15 × 11 Å2/10 × 10 Å2. The topology of the material is discussed in detail using the Points of Extension and Metals (PE&M) or the Straight-rod (STR) representation, and the sqc1121 or tfo topological type of the structure is observed, respectively. Its stability towards solvent removal and electrical properties are discussed. The material does not present any permanent porosity upon desolvation according to nitrogen sorption measurements at 77 K. Nevertheless, a significant increase in conductivity is observed on compressed pellets of the material upon post-synthetic oxidation with iodine. Raman spectroscopy combined with density functional theory (DFT) calculations has been used to characterize the oxidation state of tetrakis(4-carboxylic acid biphenyl)tetrathiafulvalene for coordination polymers.

NIR-II photothermal conversion and imaging based on a cocrystal containing twisted components

On account of the scarcity of molecules with a satisfactory second near-infrared (NIR-II) response, the design of high-performance organic NIR photothermal materials has been limited. Herein, we investigate a cocrystal incorporating tetrathiafulvalene (TTF) and tetrachloroperylene dianhydride (TCPDA) components. A stable radical was generated through charge transfer from TTF to TCPDA, which exhibits strong and wide-ranging NIR-II absorption. The metal-free TTF-TCPDA cocrystal in this research shows high photothermal conversion capability under 1064 nm laser irradiation and clear photothermal imaging. The remarkable conversion ability-which is a result of twisted components in the cocrystal-has been demonstrated by analyses of single crystal X-ray diffraction, photoluminescence and femtosecond transient absorption spectroscopy as well as theoretical calculations. We have discovered that space charge separation and the ordered lattice in the TTF-TCPDA cocrystal suppress the radiative decay, while simultaneously strong intermolecular charge transfer enhances the non-radiative decay. The twisted TCPDA component induces rapid charge recombination, while the distorted configuration in TTF-TCPDA favors an internal non-radiative pathway. This research has provided a comprehensive understanding of the photothermal conversion mechanism and opened a new way for the design of advanced organic NIR-II photothermal materials.

Fixing CO2 under Atmospheric Conditions and Dual Functional Heterogeneous Catalysis Employing Cu MOFs: Polymorphism, Single-Crystal-to-Single-Crystal (SCSC) Transformation and Magnetic Studies

New copper compounds, [Cu(C14H8O6)(C10H8N2)(H2O)] (1), [Cu(C14H8O6)(C10H8N2)(H2O)]·(C3H7ON)2 (2), [Cu(C14H8O6)(C10H8N2)(H2O)2]·(C3H7ON) (3), [Cu(C14H8O6)(C10H8N4)] (4), and [Cu(C14H8O6)(C10H8N4)]·(H2O) (5), were prepared employing 2,5-bis(prop-2-yn-1-yloxy)terephthalic acid (2,5-BPTA) as the primary ligand and 4,4'-bipyridine (1-3) and 4,4'-azopyridine (4-5) as the secondary ligands. Single-crystal studies indicated that compounds 1-4 have two-dimensional layer structures and compound 5 has a three-dimensional structure. Compounds 1-3 were isolated from the same reaction mixture but by varying the time of reaction. The framework structures of compounds 1-3 are similar and may be considered as polymorphic structures. Compounds 4 and 5 can also be considered polymorphic with a change in dimensionality of the structure. Compounds 1-3 can be formed through a single-crystal-to-single-crystal transformation under a suitable solvent mixture. The Cu center was explored for the Lewis acid-catalyzed cycloaddition reaction of epoxide and CO2 under ambient conditions in a solventless condition and also for the synthesis of propargylamine derivatives by three-component coupling reactions (A3 coupling) in a DCM medium. The Lewis basic functionality of the MOF (-N═N- group) has been explored for the Henry reaction (aldol condensation) in a solventless condition. In all of the catalytic reactions, good yields and recyclability were observed. The magnetic studies indicated that compounds 1 and 4 have antiferromagnetic interactions and compound 5 has ferromagnetic interactions. The present studies illustrated the rich diversity that the copper-containing compounds exhibit in extended framework structures.

Blue-Emitting Ligand-Mediated Assembly of Rare-Earth MOFs toward White-Light Emission, Sensing, Magnetic, and Catalytic Studies

New lanthanide carboxylate compounds with two- (2D) and three-dimensional (3D) structures have been prepared by employing 2,5-bis(prop-2-yn-1-yloxy)terephthalic acid (2,5-BPTA) as an organic linker. The compounds, [Ln(C₁₄H₈O₆)(C₇O₃H₄)·2H₂O]·4(H₂O), Ln = Y, Pr, Nd, Sm, Eu, Gd, Tb, Dy and [Ln(C₇O₃H₄)₃·(C₃H₇ON)·(H₂O)]·2(H₂O)(C₃H₇NO), Ln = La, Ce, Pr, have two- and three-dimensional structures, respectively. In all compounds, lanthanide ions are connected together, forming a dimer, which is connected by the 2,5-BPTA ligand. In the two-dimensional structure, there are two 2,5-BPTA moieties present, and in the three-dimensional structure, there are three 2,5-BPTA moieties present. The lanthanide centers are nine-coordinated, the 2D structure has a tricapped trigonal prismatic arrangement, and the 3D structure has a monocapped distorted square antiprismatic arrangement. The Pr compound forms in both 2D and 3D structures, whose formation depends on the time of the reaction (2 days─2D and 5-6 days─3D). The ligand emits in the blue region, and using the characteristic emission of Eu³⁺ (red) and Tb³⁺ (green) ions, we achieve white light emission in the (Y_0.96Tb_0.02Eu_0.02) compound. The overall quantum yield for the white light emission is 28%. The strong green luminescence of the Tb³⁺-containing compound was employed to selectively sense the Cr³⁺ and Fe³⁺ ions in aqueous solution with limits of detection (LODs) at 0.41 and 8.6 ppm, respectively. The Tb compound was found to be a good heterogeneous catalyst for the Ullman-type O-arylation reaction between phenol and bromoarene with yields of 95%. Magnetic studies on the Gd-, Tb-, and Dy-containing compounds showed weak exchange interactions within the dimeric Ln₂ units. The present work demonstrates the many utilities of the rare-earth-containing MOFs, especially toward white-light emission, metal-ion sensing, and heterogeneous catalysis.

Multifunctional Lanthanide-Based Metal-Organic Frameworks Derived from 3-Amino-4-hydroxybenzoate: Single-Molecule Magnet Behavior, Luminescent Properties for Thermometry, and CO2 Adsorptive Capacity

Herein, we describe and study a new family of isostructural multifunctional metal–organic frameworks (MOFs) with the formula {[Ln₅L₆(OH)₃(DMF)₃]·5H₂O}_n (where (H₂L) is 3-amino-4-hydroxybenzoic acid ligand) for magnetism and photoluminescence. Interestingly, three of the materials (Dy-, Er-, and Yb-based MOFs) present single-molecule magnet (SMM) behavior derived from the magnetic anisotropy of the lanthanide ions as a consequence of the adequate electronic distribution of the coordination environment. Additionally, photoluminescence properties of the ligand in combination with Eu and Tb counterparts were studied, including the heterometallic Eu–Tb mixed MOF that shows potential as ratiometric luminescent thermometers. Finally, the porous nature of the framework allowed showing the CO₂ sorption capacity.

A new family of isostructural multifunctional metal−organic frameworks has been described and studied for magnetism and photoluminescence. Interestingly, some materials present single-molecule magnet behavior, and photoluminescence properties of the ligand in combination with Eu and Tb counterparts were studied, including the heterometallic Eu−Tb mixed MOF that shows potential as ratiometric luminescent thermometers. Finally, the porous nature of the framework allowed showing the CO₂ sorption capacity.

Redox-Active Metal-Organic Frameworks with Three-Dimensional Lattice Containing the m-Tetrathiafulvalene-Tetrabenzoate

Metal-organic frameworks (MOFs) constructed by tetrathiafulvalene-tetrabenzoate (H₄TTFTB) have been widely studied in porous materials, while the studies of other TTFTB derivatives are rare. Herein, the meta derivative of the frequently used p-H₄TTFTB ligand, m-H₄TTFTB, and lanthanide (Ln) metal ions (Tb³⁺, Er³⁺, and Gd³⁺) were assembled into three novel MOFs. Compared with the reported porous Ln-TTFTB, the resulted three-dimensional frameworks, Ln-m-TTFTB ([Ln₂(m-TTFTB)(m-H₂TTFTB)_0.5(HCOO)(DMF)]·2DMF·3H₂O), possess a more dense stacking which leads to scarce porosity. The solid-state cyclic voltammetry studies revealed that these MOFs show similar redox activity with two reversible one-electron processes at 0.21 and 0.48 V (vs. Fc/Fc⁺). The results of magnetic properties suggested Dy-m-TTFTB and Er-m-TTFTB exhibit slow relaxation of the magnetization. Porosity was not found in these materials, which is probably due to the meta-configuration of the m-TTFTB ligand that seems to hinder the formation of pores. However, the m-TTFTB ligand has shown to be promising to construct redox-active or electrically conductive MOFs in future work.

Enhancing the photothermal conversion of tetrathiafulvalene-based MOFs by redox doping and plasmon resonance

Near-infrared (NIR) photothermal materials hold great promise for use in several applications, particularly in photothermal therapy, diagnosis, and imaging. However, current NIR responsive materials often show narrow absorption bands and low absorption efficiency, and have long response times. Herein, we demonstrate that the NIR absorption of tetrathiafulvalene-based metal–organic frameworks (MOFs) can be tuned by redox doping and using plasmonic nanoparticles. In this work, a MOF containing redox-active tetrathiafulvalene (TTF) units and Dy-carboxylate chains was constructed, Dy-m-TTFTB. The NIR absorption of the as-synthesized Dy-m-TTFTB was further enhanced by Ag⁺ or I₂ oxidation, transforming the neutral TTF into a TTF˙⁺ radical state. Interestingly, treatment with Ag⁺ not only generated TTF˙⁺ radicals, but it also formed Ag nanoparticles (NPs) in situ within the MOF pores. With both TTF˙⁺ radicals and Ag NPs, Ag NPs@Dy-m-TTFTB was shown to exhibit a wide range of absorption wavelengths (200–1000 nm) and also a high NIR photothermal conversion. When the system was irradiated with an 808 nm laser (energy power of 0.7 W cm⁻²), Ag NPs@Dy-m-TTFTB showed a sharp temperature increase of 239.8 °C. This increase was higher than that of pristine Dy-m-TTFTB (90.1 °C) or I₂ treated I₃⁻@Dy-m-TTFTB (213.0 °C).

The photo-response of the redox-active metal–organic framework has been systematically tuned by incorporating plasmonic Ag nanoparticles and tetrathiafulvalene radicals, resulting in efficient near-infrared photothermal conversion materials.

Chemical structure modulation in conductive MOFs by adjusting the oxidation state of the ligand and introducing alkali metal ions

By changing the ligand from THBQ to HHB or introducing Rb+ and Cs+, the structure of MnTHBQ was modulated and this work highlights the importance of the redox-active ligands and alkali metal ions in manipulating the structures of MOFs.

Tetrathiafulvalene-Cobalt Metal-Organic Frameworks for Lithium-Ion Batteries with Superb Rate Capability

Although pristine metal-organic framework (MOF) anodes for lithium-ion batteries (LIBs) show moderate activities and relatively stable cycling, the poor rate capability of the MOF anodes limited their applications in the development of a new generation of energy storage. Herein, the electric active Co^II ion is selected to coordinate with redox-active S-rich tetrathiafulvalene (TTF) derivatives to create two TTF-Co-MOFs, formulated as [Co₂(py-TTF-py)₂(BDC)₂]·2DMF·H₂O (TTF-Co-MOF 1) and [Co₂(py-TTF-py)₂(BPDC)₂]·3DMF·3H₂O (TTF-Co-MOF 2), where py-TTF-py = 2,6-bis(4'-pyridyl)tetrathiafulvalene, H₂BDC = terephthalic acid, H₂BPDC = biphenyl-4,4'-dicarboxylic acid, and DMF = N,N-dimethylformamide. Crystallographic characterization indicated that the two MOFs possess similar 2-fold-interpenetrating 3D frameworks but with two different pore sizes. The pore-size-dependent performances of the TTF-Co-MOFs were explored to optimize the MOFs as the anode materials for LIBs. TTF-Co-MOF 1 presents a high reversible specific capacity of 1186.6 mAh g^-1 at 200 mA g^-1 after 287 cycles. The rate capability is greatly enhanced by the introduction of Co^II into TTF-based MOFs with specific capacities of 1028.6 mAh g^-1 at 5 A g^-1 and 966.5 mAh g^-1 at 10 A g^-1. On the basis of the series analysis of theoretical calculations, electrochemical impedance spectroscopy, and crystal structures, it is found that the Co^II metal centers play a bridging role in charge transport within the MOF framework, which is beneficial for the transportation of Li ions. The competitive performances of TTF-Co-MOF 1 are attributed to the synergistic effect of the Co^II metal centers and S-rich TTF ligand as well as suitable porosity. The study shed some light for the fabrication of advanced energy storage devices through the rational design of MOF-based anode materials.

A family of lanthanide metal-organic frameworks based on a redox-active tetrathiafulvalene-dicarboxylate ligand showing slow relaxation of magnetisation and electronic conductivity

The reaction of the redox-active tetrathiafulvalene ligand and lanthanide ions is an important approach to prepare photo-electro-magnetic multifunctional metal-organic framework materials. A series of isostructural lanthanide metal-organic frameworks (Ln-MOFs) based on the in situ generated tetrathiafulvalene dicarboxylate (TTF-DC) ligand, {[Ln₄(TTF-DC)₆(DMF)₄(H₂O)₂]·4DMF}_n (Ln = Gd (1-Gd), Tb (1-Tb), Dy (1-Dy) and Er (1-Er)), was synthesized and characterized. These Ln-MOFs display tunable redox-active properties and semiconductor performance, and their electronic conductivities have been significantly improved after oxidation. All MOFs except 2-Tb exhibit slow magnetic relaxation under an applied dc field. 1-Dy and 2-Dy show field-induced single-molecule magnet (SMM) behaviour with energy barriers (U_eff) of 30.77 K (τ₀ = 5.23 × 10^-8) and 26.41 K (1.04 × 10^-8 s), respectively.

Conductive Metal-Organic Frameworks: Electronic Structure and Electrochemical Applications

Smarter and minimization of devices are consistently substantial to shape the energy landscape. Significant amounts of endeavours have come forward as promising steps to surmount this formidable challenge. It is undeniable that material scientists were contemplating smarter material beyond purely inorganic or organic materials. To our delight, metal-organic frameworks (MOFs), an inorganic-organic hybrid scaffold with unprecedented tunability and smart functionalities, have recently started their journey as an alternative. In this review, we focus on such propitious potential of MOFs that was untapped over a long time. We cover the synthetic strategies and (or) post-synthetic modifications towards the formation of conductive MOFs and their underlying concepts of charge transfer with structural aspects. We addressed theoretical calculations with the experimental outcomes and spectroelectrochemistry, which will trigger vigorous impetus about intrinsic electronic behaviour of the conductive frameworks. Finally, we discussed electrocatalysts and energy storage devices stemming from conductive MOFs to meet energy demand in the near future.

Electrically Conductive Coordination Polymers for Electronic and Optoelectronic Device Applications

Electrically conductive coordination polymers (generally known as metal-organic frameworks, MOFs) are a class of crystalline hybrid materials produced by the reasonable self-assembly of metal nodes and organic linkers. The unique and intriguing combination of inorganic and organic components endows coordination polymers with superior optical and electrical properties, which have recently aroused much attention in several electronic and optoelectronic technological applications. However, there are many challenging obstacles and issues that need to be addressed in this burgeoning field. In this Perspective, we first provide a fundamental understanding about the electronic design strategies that provide better guidance for realizing high conductivities and good mobilities in coordination polymers. We then examine the current established synthetic approaches to construct high-quality working samples of electrically conductive coordination polymers for device integration. This is followed by a discussion of the current state-of-the-art progress toward the preliminary achievements in (opto)electronic devices spanning chemiresistive sensors, field-effect transistors, organic photovoltaics, photodetectors, etc. Finally, we conclude this Perspective with the existing hurdles and limitations in this area, along with the critical directions and opportunities for future research.

Encoding Multilayer Complexity in Anti-Counterfeiting Heterometallic MOF-Based Optical Tags

Optical tags provide a way to quickly and unambiguously identify valuable assets. Current tag fluorophore options lack the tunability to allow combined methods of encoding in a single material. Herein we report a design strategy to encode multilayer complexity in a family of heterometallic rare-earth metal-organic frameworks based on highly connected nonanuclear clusters. To impart both intricacy and security, a synergistic approach was implemented resulting in both overt (visible) and covert (near-infrared, NIR) properties, with concomitant multi-emissive spectra and tunable luminescence lifetimes. Tag authentication is validated with a variety of orthogonal detection methodologies. Importantly, the effect induced by subtle compositional changes on intermetallic energy transfer, and thus on the resulting photophysical properties, is demonstrated. This strategy can be widely implemented to create a large library of highly complex, difficult-to-counterfeit optical tags.

Rare-Earth Metal Tetrathiafulvalene Carboxylate Frameworks as Redox-Switchable Single-Molecule Magnets

Using the redox-active tetrathiafulvalene tetrabenzoate (TTFTB^4- ) as the linker, a series of stable and porous rare-earth metal-organic frameworks (RE-MOFs), [RE₉ (μ₃ -OH)₁₃ (μ₃ -O)(H₂ O)₉ (TTFTB)₃ ] (1-RE, where RE=Y, Sm, Gd, Tb, Dy, Ho, and Er) were constructed. The RE₉ (μ₃ -OH)₁₃ (μ₃ -O) (H₂ O)₉ ](CO₂ )₁₂ clusters within 1-RE act as segregated single-molecule magnets (SMMs) displaying slow relaxation. Interestingly, upon oxidation by I₂ , the S=0 TTFTB^4- linkers of 1-RE were converted into S= 1 / 2 TTFTB^.3- radical linkers which introduced exchange-coupling between SMMs and modulated the relaxation. Furthermore, the SMM property can be restored by reduction in N,N-dimethylformamide. These results highlight the advantage of MOFs in the construction of redox-switchable SMMs.

Electrically Conductive Metal-Organic Frameworks

Metal–organic frameworks (MOFs) are intrinsically porous extended solids formed by coordination bonding between organic ligands and metal ions or clusters. High electrical conductivity is rare in MOFs, yet it allows for diverse applications in electrocatalysis, charge storage, and chemiresistive sensing, among others. In this Review, we discuss the efforts undertaken so far to achieve efficient charge transport in MOFs. We focus on four common strategies that have been harnessed toward high conductivities. In the “through-bond” approach, continuous chains of coordination bonds between the metal centers and ligands’ functional groups create charge transport pathways. In the “extended conjugation” approach, the metals and entire ligands form large delocalized systems. The “through-space” approach harnesses the π–π stacking interactions between organic moieties. The “guest-promoted” approach utilizes the inherent porosity of MOFs and host–guest interactions. Studies utilizing less defined transport pathways are also evaluated. For each approach, we give a systematic overview of the structures and transport properties of relevant materials. We consider the benefits and limitations of strategies developed thus far and provide an overview of outstanding challenges in conductive MOFs.

Interdigitated conducting tetrathiafulvalene-based coordination networks

Assembly of a novel ethylenedithio-tetrathiafulvalene (EDT-TTF) derivative bearing two adjacent 4-thiopyridyl groups with M(NCS)2 nodes (M = Fe, Co) leads to two isostructural 1D coordination polymers showing an enhancement of their electronic conductivity by six orders of magnitude (10-6vs. 10-12 S cm-1), upon surface oxidation by iodine and subsequent generation of EDT-TTF-based radicals.

Diverse π-π stacking motifs modulate electrical conductivity in tetrathiafulvalene-based metal-organic frameworks

We report three electrically conductive metal-organic frameworks (MOFs) based on a tetrathiafulvalene linker and La3+. Depending on the solvent ratios and temperatures used in their solvothermal synthesis, these MOFs crystallize with different topologies containing distinct π-π stacking sequences of the ligand. Notably, their transport properties correlate rationally with the stacking motifs: longer S···S contact distances between adjacent ligands coincide with lower electrical conductivities and higher activation energies. Diffuse reflectance spectroscopic measurements reveal ligand-based intervalence charge transfer bands in each phase, implicating charge delocalization among mixed-valent tetrathiafulvalene units as the dominant mode of transport. Overall, these frameworks demonstrate how tuning the intermolecular interactions in MOFs serves as a route towards controlling their physical properties.