Catalytic Processes for the Neutralization of Sulfur Mustard

Ultraviolet Light-Assisted Decontamination of Chemical Warfare Agent Simulant 2-Chloroethyl Phenyl Sulfide on Metal-Loaded TiO2 /Ti Surfaces

The application of ultraviolet (UV) light for the decontamination of chemical warfare agents (CWAs) has gained recognition as an effective method, especially for treating hard-to-reach areas where wet chemical methods are impractical. In this study, TiO2 /Ti was employed as a model catalyst, which was contaminated with 2-chloroethyl phenyl sulfide (CEPS), and subjected to photocatalytic decontamination using both UVB and UVC light. Additionally, photocatalytic decontamination efficiency by introducing Au, Pt, and Cu onto the TiO2 /Ti surface was explored. During the photodecomposition process under UVC light, at least eight distinct secondary byproducts were identified. It was observed that the introduction of overlayer metals did not significantly enhance the photodecomposition under UVC light instead overlaid Au exhibited substantially improved activity under UVB light. Whereas, photodecomposition process under UVB light, only five secondary products were detected, including novel compounds with sulfoxide and sulfone functional groups. This novel study offers valuable insights into the generation of secondary products and sheds light on the roles of overlayer metals and photon wavelength in the photodecontamination process of CWA.

Two Tetra-Nuclear Ln-Substituted Prazine Dicarboxylic Acid-Functionalized Selenotungstates with Catalytic Oxidation of Thioether Properties

Two two-dimensional Ln-substituted prazine dicarboxylic acid-functionalized selenotungstates Na3H9[(H2N(CH3)2]2{(Se4W27O100)[Ln4(H2O)8(Hpzdc)2(pzdc)]}·26H2O [Ln = Nd (1) and Ce (2)]; H2pzdc = 2,3-pyrazine dicarboxylic acid) have been synthesized by one-pot self-assembly strategy, in which the basic polyanion [Se4W27O100]22-was composed of two [SeW8O31]10- fragments, a [SeW9O33]8- segment and an intriguing {SeO} group, simultaneously tetra-nuclear Ln3+ ions with H2pzdc pendants were embedded. Compounds 1 and 2 showed excellent catalytic oxidation of thioether properties within a short time (20 min) with high 100% conversion and 98.9% selectivity. In addition, the pioneering Ln-substituted selenotungstates were used as catalysts to degrade sulfur mustard simulant 2-chloroethyl ethyl sulfide at room temperature with 99% conversion and 100% selectivity. The chemical kinetic experiment studies revealed that the catalytic reaction was in compliance with the first-order reaction, and the kinetic half-life (t1/2) values were 3.814 and 3.849 min, respectively.

Advances in Metal-Organic Frameworks for the Removal of Chemical Warfare Agents: Insights into Hydrolysis and Oxidation Reaction Mechanisms

The destruction of chemical warfare agents (CWAs) is a crucial area of research due to the ongoing evolution of toxic chemicals. Metal-organic frameworks (MOFs), a class of porous crystalline solids, have emerged as promising materials for this purpose. Their remarkable porosity and large surface areas enable superior adsorption, reactivity, and catalytic abilities, making them ideal for capturing and decomposing target species. Moreover, the tunable networks of MOFs allow customization of their chemical functionalities, making them practicable in personal protective equipment and adjustable to dynamic environments. This review paper focuses on experimental and computational studies investigating the removal of CWAs by MOFs, specifically emphasizing the removal of nerve agents (GB, GD, and VX) via hydrolysis and sulfur mustard (HD) via selective photooxidation. Among the different MOFs, zirconium-based MOFs exhibit extraordinary structural stability and reusability, rendering them the most promising materials for the hydrolytic and photooxidative degradation of CWAs. Accordingly, this work primarily concentrates on exploring the intrinsic catalytic reaction mechanisms in Zr-MOFs through first-principles approximations, as well as the design of efficient degradation strategies in the aqueous and solid phases through the establishment of Zr-MOF structure-property relationships. Recent progress in the tuning and functionalization of MOFs is also examined, aiming to enhance practical CWA removal under realistic battlefield conditions. By providing a comprehensive overview of experimental findings and computational insights, this review paper contributes to the advancement of MOF-based strategies for the destruction of CWAs and highlights the potential of these materials to address the challenges associated with chemical warfare.

Supramolecular detoxification of nitrogen mustard via host-guest encapsulation by carboxylatopillar[5]arene

Nitrogen mustard (NM), a kind of alkylating agent similar to sulfur mustard, remains a threat to public health. However, there is nearly no satisfactory antidote for nitrogen mustard. Herein, we developed a supramolecular antidote to nitrogen mustard through efficient complexation of NM by carboxylatopillar[5]arene potassium salts (CP[5]AK). The cavity of methoxy pillar[5]arene (P5A) is sufficient to encapsulate NM with an association constant of 1.27 × 10² M^-1, which was investigated by ¹H NMR titration, density functional theory studies and independent gradient model studies. NM degrades to the reactive aziridinium salt (2) in the aqueous phase which irreversibly alkylates DNA and proteins, causing severe tissue damage. Considering the size/charge matching with toxic intermediate 2, water-soluble CP[5]AK was selected to encapsulate the toxic aziridinium salt (2), resulting in a high association constant of 4.10 × 10⁴ M^-1. The results of protection experiments of guanosine 5'-monophosphate (GMP) by CP[5]AK indicated that the formation of a complex could effectively inhibit the alkylation of DNA. Besides, in vitro and in vivo experiments also indicated that the toxicity of the aziridinium salt (2) is inhibited with the formation of a stable host-guest complex, and CP[5]AK has a good therapeutic effect on the damage caused by NM. This study provides a new mechanism and strategy for the treatment of NM exposure-induced skin injuries.

A Zr-added Dawson-type poly(polyoxometalate)

A novel Zr-added trimer, [H₂N(CH₃)₂]₁₀H₁₄[(Zr₂P₂W₁₆O₆₁)₃]·7H₂O (1), has been made under hydrothermal conditions, and contains the highest number of Zr centers in known Dawson-type poly(POM)s. A remarkable feature of this study is the first discovery of a new type of divacant [α-5,10-P₂W₁₆O₆₀]^14- fragment, which assembles with Zr⁴⁺ ions to form a cyclic trimer. Furthermore, 1 as a heterogeneous catalyst exhibits high activity for the selective oxidative degradation of a sulfur mustard simulant CEES.

Porphyrin-Moiety-Functionalized Metal-Organic Layers Exhibiting Catalytic Capabilities for Detoxifying Nerve Agent and Blister Agent Simulants

The development of very efficient bifunctional catalysts for the simultaneous detoxification of two kinds of the deadliest chemical warfare agents (CWAs), nerve agent and blister agent, is highly desirable. In this study, two porphyrin-based ligands [tetrakis(4-carboxyphenyl) porphyrin (TCPP) and protoporphyrin IX (PPIX)] are introduced into 2D Zr-1,3,5-tris(4-carboxyphenyl)benzene (BTB) metal-organic layers (MOLs), composed of six-connected Zr₆ nodes and the tritopic carboxylate ligand BTB, by a solvent-assisted ligand incorporation method. The loads of TCPP and PPIX are 6.4 and 10.9 wt %, respectively. The detoxification of simulants of the nerve agent and the blister agent was conducted to investigate the catalytic activity of porphyrin-moiety-functionalized MOLs. The reaction half-life of optimal TCPP-functionalized MOL catalyzing the hydrolysis of a nerve agent simulant is only 2.8 min, meanwhile, the half-life of the selective catalytic oxidation of a blister agent simulant is only 1.2 min under LED illumination. More importantly, such a degradation half-life is only about 4 min under natural sunlight (∼60 mW/cm²). To our knowledge, TCPP-functionalized MOL is by far the most efficient catalyst for blister agent simulant degradation under solar light. Therefore, 2D ultrathin MOLs on demand appear to be a promising and efficient material platform for the development of bifunctional catalysts for CWA protection.

Fe-Doped MoS2 Nanozyme for Antibacterial Activity and Detoxification of Mustard Gas Simulant

The peroxidase-like catalytic activity of various nanozymes was extensively applied in various fields. In this study, we have demonstrated the preparation of Fe-doped MoS₂ (Fe@MoS₂) nanomaterials with enhanced peroxidase-like activity of MoS₂ in a co-catalytic pathway. In view of Fenton reaction, the peroxidase-like Fe@MoS₂ nanozyme prompted the decomposition of hydrogen peroxide (H₂O₂) to a reactive hydroxyl radical (·OH). The efficient decomposition of H₂O₂ in the presence of Fe@MoS₂ has been employed toward the antibacterial activity and detoxification of mustard gas simulant. The combined effect of Fe@MoS₂ and H₂O₂ showed remarkable antibacterial activity against the drug-resistant bacterial strain methicillin-resistant Staphylococcus aureus and Escherichia coli with the use of minimal concentration of H₂O₂. Fe@MoS₂ was further applied for the detoxification of the chemical warfare agent sulfur mustard simulant, 2-chloroethyl ethyl sulfide, by selective conversion to the nontoxic sulfoxide. This work demonstrates the development of a hybrid nanozyme and its environmental remediation from harmful chemicals to microbes.

Selective Photodetoxification of a Sulfur Mustard Simulant Using Plasmonic Aluminum Nanoparticles

Plasmonic nanostructures have attracted increasing interest in the fields of photochemistry and photocatalysis for their ability to enhance reactivity and tune reaction selectivity, a benefit of their strong interactions with light and their multiple energy decay mechanisms. Here we introduce the use of earth-abundant plasmonic aluminum nanoparticles as a promising renewable detoxifier of the sulfur mustard simulant 2-chloroethylethylsulfide through gas phase photodecomposition. Analysis of the decomposition products indicates that C-S bond breaking is facilitated under illumination, while C-Cl breaking and HCl elimination are favored under thermocatalytic (dark) conditions. This difference in reaction pathways illuminates the potential of plasmonic nanoparticles to tailor reaction selectivity toward less hazardous products in the detoxification of chemical warfare agents. Moreover, the photocatalytic activity of the Al nanoparticles can be regenerated almost completely after the reaction concludes through a simple surface treatment.

Soft detoxification of chemical warfare agent simulants and pesticides under pressure

The neutralisation of structurally varied chemical warfare agent simulants (blister and nerve agents) and pesticides (Paraoxon) with the assistance of high pressure is reported. Chloroethyl amines and sulfides (nitrogen and sulfur mustards), phosphonothioates (V-series nerve agents) and phosphates (pesticide) readily react with simple nucleophilic scavengers (alcohols, amines) at P > 14 000 bar.

Ultrafast Degradation and High Adsorption Capability of a Sulfur Mustard Simulant under Ambient Conditions Using Granular UiO-66-NH2 Metal-Organic Gels

Zirconium-based metal-organic frameworks (Zr-MOFs) have been considered as prospective materials for the degradation of nerve chemical warfare agents (CWAs) but show poor catalytic performance toward blister agents. Moreover, the powder issues and the poor adsorption capability also remain as the major challenges for the application of Zr-MOFs in practical CWA detoxification. Herein, a series of defected granular UiO-66-NH2 metal-organic gels are synthesized via adjusting the amount of added concentrated hydrochloric acid for the decontamination of 2-chloroethyl ethyl sulfide (2-CEES), a sulfur mustard simulant. The half-life of 2-CEES decontaminated by defected granular UiO-66-NH2 metal-organic gels can be shortened to 7.6 min, which is the highest reported value for MOFs under ambient conditions. The mechanism of decontamination is that the amino group on the linkers in UiO-66-NH2 MOGs undergoes a substitution reaction with 2-CEES to yield 2-(2-(ethylthio)ethylamino)terephthalic acid, which is less toxic and fixed in the frameworks. The recycling test corroborates that the granular UiO-66-NH2 xerogels possess good stability and reusability. Static adsorption and desorption tests show that UiO-66-NH2 xerogels possess a high 2-CEES vapor adsorption capacity of 802 mg/g after exposure for 1 d and only 28 wt % desorption capacity after air exposure for 7 d. The dual function of ultrafast degradation and high adsorption capability provide a firm foundation for using UiO-66-NH2 xerogels as a future protection media.

Vapor phase catalytic photooxidation of sulfides to sulfoxides: application to the neutralization of sulfur mustard simulants

A visible-light photocatalytic approach was developped for the aerobic oxidation of sulfides into the corresponding sulfoxides, including sulfur mustard simulants. The heterogeneous catalytic system is selective, operates in the gas...

Detoxification of the Toxic Sulfur Mustard Simulant by a Supramolecular Antidote in Vitro and in Vivo

Although great potential hazards and threats still occur from sulfur mustard, there are no specific medicine or therapy for the intoxication of sulfur mustard. Herein, we have demonstrated a supramolecular approach for the detoxification of the sulfur mustard simulant CEES (4) in vitro and in vivo by carboxylatopillar[5]arene potassium salts (CP[5]AK 1) efficiently based on host-guest interactions. The encapsulation of CEES (4) by the cavity of the pillar[5]arene 2 is driven by C-H···π interactions between CEES (4) and the electron-rich cavity of pillar[5]arene 2, which was investigated by 1H NMR titration, density functional theory studies, and the independent gradient model studies. CEES (4) is degradated to the reactive sulfonium salts quickly in aqueous media, resulting in the alkylation of DNA and proteins. The sulfonium salts can be encapsulated by CP[5]AK 1 efficiently, which accelerates the degradation of the sulfonium salts about 14 times. The cell and animal experiments indicated that the bioactivities of the sulfonium salts are inhibited with the formation of stable host-guest complexes, and CP[5]AK 1 has a good therapeutic effect on the damages caused by CEES (4) at either pre- or post-treatments. Due to the low cytotoxicity and good therapeutic effect, the anionic pillar[5]arenes are expected to be developed as specific antidotes against sulfur mustard (HD).

Toxic blister agents: Chemistry, mode of their action and effective treatment strategies

Since their use during the First World War, Blister agents have posed a major threat to the individuals and have caused around two million casualties. Major incidents occurred not only due to their use as chemical warfare agents but also because of occupational hazards. Therefore, a clear understanding of these agents and their mode of action is essential to develop effective decontamination and therapeutic strategies. The blister agents have been categorised on the basis of their chemistry and the biological interactions that entail post contamination. These compounds have been known to majorly cause blisters/bullae along with alkylation of the contaminated DNA. However, due to the high toxicity and restricted use, very little research has been conducted and a lot remains to be clearly understood about these compounds. Various decontamination solutions and detection technologies have been developed, which have proven to be effective for their timely mitigation. But a major hurdle seems to be the lack of proper understanding of the toxicological mechanism of action of these compounds. Current review is about the detailed and updated information on physical, chemical and biological aspects of various blister agents. It also illustrates the mechanism of their action, toxicological effects, detection technologies and possible decontamination strategies.

UiO-66-NH2 Fabrics: Role of Trifluoroacetic Acid as a Modulator on MOF Uniform Coating on Electrospun Nanofibers and Efficient Decontamination of Chemical Warfare Agent Simulants

Protective fabrics with air-permeable and flexible features are crucial for practical application in the detoxification of chemical warfare agents (CWAs). Zr-based metal-organic frameworks (Zr-MOFs) are desirable to exhibit outstanding degradation toward CWAs. However, generally, MOFs with powders cannot afford the utilization as a protective layer directly; meanwhile, it is still a puzzling challenge to integrate MOFs with textiles efficiently. Herein, we develop a scalable and controllable strategy to fabricate UiO-66-NH₂ on electrospun polyacrylonitrile nanofibers (UiO-66-NH₂ fabrics) firmly and uniformly to capture and catalyze 2-chloroethyl ethyl sulfide (CEES) effectively for self-detoxification. The obtained UiO-66-NH₂ fabrics are greatly capable of specific surface area, ample porosity, excellent crystallinity, and abundant catalytic active sites. Consequently, CEES can be removed efficiently up to 97.7% after 48 h by reaction and adsorption. The degradation products mainly including ethyl-2-hydroxyethyl sulfide, ether, bis[2-(ethylthio)ethyl], and 2-(2-(ethylthio)ethylamino) terephthalic acid are detected. Moreover, the obtained nanofibrous fabrics possess air-permeable, washable, and flexible as well as lightweight merits, totally ensuring their promising engineering applications for protective clothing.

Reduced polyoxomolybdate immobilized on reduced graphene oxide for rapid catalytic decontamination of a sulfur mustard simulant

Keggin-type polyoxometalates (POMs) were immobilized on poly(diallyldimethylammonium chloride) (PDDA) functionalized reduced graphene oxide (rGO) by a facile and broad-spectrum hydrothermal method. The prepared POMs@PDDA-rGO composites (POM = H3PMo12O40, H3PW12O40, H5PMo10V2O40) have been thoroughly characterized using a series of techniques. The three composites can catalyze the oxidative decontamination of a sulfur mustard simulant, 2-chloroethyl ethyl sulfide (CEES) in the order of PMo12@PDDA-rGO > PMo10V2@PDDA-rGO > PW12@PDDA-rGO. Notably, under ambient conditions PMo12@PDDA-rGO can convert 99% of CEES within 30 min in the presence of nearly stoichiometric aqueous H2O2 (3 wt%) and its catalytic activity is significantly higher than that of homogeneous H3PMo12O40. XPS spectral analysis and control experiments indicate that the Mo center of POM is reduced from +6 to +5 during the hydrothermal process, and the excellent catalytic performance is related to the reduction of Mo. Moreover, the PMo12@PDDA-rGO composite is stable during the decontamination process and it can be used for at least five cycles without loss of activity.