Gas Storage in Porous Molecular Materials

Metal cation substitution can tune CO2, H2O and CH4 switching pressure in transiently porous coordination networks

Compared to rigid physisorbents, switching coordination networks that reversibly transform between closed (non-porous) and open (porous) phases offer promise for gas/vapour storage and separation owing to their improved working capacity and desirable thermal management properties. We recently introduced a coordination network, X-dmp-1-Co, which exhibits switching enabled by transient porosity. The resulting "open" phases are generated at threshold pressures even though they are conventionally non-porous. Herein, we report that X-dmp-1-Co is the parent member of a family of transiently porous coordination networks [X-dmp-1-M] (M = Co, Zn and Cd) and that each exhibits transient porosity but switching events occur at different threshold pressures for CO2 (0.8, 2.1 and 15 mbar, for Co, Zn and Cd, respectively, at 195 K), H2O (10, 70 and 75% RH, for Co, Zn and Cd, respectively, at 300 K) and CH4 (<2, 10 and 25 bar, for Co, Zn and Cd, respectively, at 298 K). Insight into the phase changes is provided through in situ SCXRD and in situ PXRD. We attribute the tuning of gate-opening pressure to differences and changes in the metal coordination spheres and how they impact dpt ligand rotation. X-dmp-1-Zn and X-dmp-1-Cd join a small number of coordination networks (<10) that exhibit reversible switching for CH4 between 5 and 35 bar, a key requirement for adsorbed natural gas storage.

Programmed guest confinement via hierarchical cage to cage transformations

Taking inspiration from Nature, where (bio)molecular geometry variations are exploited to tune a large variety of functions, supramolecular chemistry has continuously developed novel systems in which, as a consequence of a specific stimulus, structural changes occur. Among the different architectures, supramolecular cages have been continuously investigated for their capability to act as functional hosts where guests can be released in a controlled fashion. In this paper, a novel methodology based on the use of phenanthrenequinone is applied to selectively change the binding properties of a tris(2-pyridylmethyl)amine TPMA-based cage. In particular, subcomponent substitution has been used to change structural cage features thus controlling the inclusion ratio of competing guests differing in size or chirality.

Structural and dimensional control of porphyrin capsules using Group 15 tris(3-pyridyl) linkers

While supramolecular chemistry involving organic and metallo-organic host assemblies is a well-established and important field with applications in gas-storage, drug-delivery and the regio- and stereo-control of organic reactions, the use of main group elements in this setting (beyond the second row of the p-block) has been little explored. In this paper we show how periodic trends in the p-block can provide the means for systematic size and structural control in an important class of supramolecular porphyrin-based capsules. The formation of molecular and extended 2D capsule arrangements between the heavier Group 15 tris(3-pyridyl) linkers Sb(3-py)₃ and Bi(3-py)₃ and the metallo-porphyrins MTPP (M = Zn, Mg; TPP = tetraphenylporphyrin, 3-py = 3-pyridyl) is the first study involving heavier Group 15 pyridyl linkers. The increase in C-E bond length in the E(3-py)₃ linkers moving down Group 15 (from E = P, to Sb, to Bi) can be used to alter the dimensions and structural preference of the capsules, as can oxidation of the Group 15 bridgehead atoms themselves. The subtle changes in the dimensions and Lewis acidity of the encapsulates have a dramatic effect on the rate and selectivity of the catalytic oxidative cleavage of organic diols and catalytic oxidation of α-hydroxyketones. By providing simple tools for modulating the chemical and steric properties of the capsules this work should have direct applications for the tuning of the activity and specificity of a range of catalytic systems based on main-group-based capsules of this type.

Metallic–Organic Cages (MOCs) with Heterometallic Character: Flexibility-Enhancing MOFs

The dichotomy between metal–organic frameworks (MOFs) and metal–organic cages (MOCs) opens up the research spectrum of two fields which, despite having similarities, both have their advantages and disadvantages. Due to the fact that they have cavities inside, they also have applicability in the porosity sector. Bloch and coworkers within this evolution from MOFs to MOCs manage to describe a MOC with a structure of Cu2 paddlewheel Cu4L4 (L = bis(pyrazolyl)methane) with high precision thanks to crystallographic analyses of X-ray diffraction and also SEM-EDX. Then, also at the same level of concreteness, they were able to find the self-assembly of Pd(II)Cl2 moieties on the available nitrogen donor atoms leading to a [Cu4(L(PdCl2))4] structure. Here, calculations of the DFT density functional allow us to reach an unusual precision given the magnitude and structural complexity, explaining how a pyrazole ring of each bis(pyprazolyl)methane ligand must rotate from an anti to a syn conformation, and a truncation of the MOC structure allows us to elucidate, in the absence of the MOC constraint and its packing in the crystal, that the rotation is almost barrierless, as well as also explain the relative stability of the different conformations, with the anti being the most stable conformation. Characterization calculations with Mayer bond orders (MBO) and noncovalent interaction (NCI) plots discern what is important in the interaction of this type of cage with PdCl2 moieties, also CuCl2 by analogy, as well as simple molecules of water, since the complex is stable in this solvent. However, the L ligand is proved to not have the ability to stabilize an H2O molecule.

Unravelling Structural Dynamics, Supramolecular Behavior, and Chiroptical Properties of Enantiomerically Pure Macrocyclic Tertiary Ureas and Thioureas

The introduction of urea or thiourea functionality to the macrocycle skeleton represents an alternative way to control conformational dynamics of chiral, polyamines of a figure-shaped periodical structure. Formally highly symmetrical, these macrocycles may adapt diverse conformations, depending on the nature of an amide linker and on a substitution pattern within the aromatic units. The type of heteroatom X in the N-C(═X)-N units present in each vertex of the macrocycle core constitutes the main factor determining the chiroptical properties. In contrast to the urea-containing derivatives, the electronic circular dichroism of thioureas is controlled by the chiral neighborhood closest to the chromophore. The dynamically induced exciton couplet is observed when the biphenyl chromophores are present in the macrocycle core. In the solid state, the seemingly disordered molecules may create ordered networks stabilized by intermolecular S···halogen, H···halogen, and S···H interactions. The presence of two bromine substituents in each aromatic unit in thiourea-derived trianglamine gives rise to a self-sorting phenomenon in the crystal. In solution, this particular macrocycle exists as a dynamic equimolar mixture of two conformational diastereoisomers, differing in the spatial (clockwise and counter clockwise) arrangement of the C-Br bonds. In the crystal lattice, macrocycles of a given handedness assemble into homohelical layers.

Anion Binding as a Strategy for the Synthesis of Porous Salts

Porous salts have recently emerged as a promising new class of ultratunable permanently microporous solids. These adsorbents, which were first reported as ionic solids based on porous cations and anions, can be isolated from a wide variety of charged, permanently porous coordination cages. A challenge in realizing the full tunability of such systems, however, lies in the fact that the majority of coordination cages for which surface areas have been reported are comprised of charge-balanced inorganic and organic building blocks that result in neutral cages. As such, most reported permanently porous coordination cages cannot be used as reagents in the synthesis of porous salts. Here, we show that the facile reaction of TBAX (TBA⁺ = tetra-n-butylammonium; X = F^- and Cl^-) with molybdenum paddlewheel-based coordination cages of the M₄L₄ and M₂₄L₂₄ lantern and cuboctahedra structure types, respectively, affords charged cages by virtue of coordination of halide anions to the internal and/or external metal sites on these structures, as confirmed by single-crystal X-ray diffraction, X-ray photoelectron spectroscopy, and nuclear magnetic resonance (NMR) spectroscopy. At a practical level, the TBAX/cage reactions, which are fully reversible upon isolation of the cage with the appropriate solvent, solubilize otherwise rigorously insoluble cages. This method significantly increases the solution processability of these highly porous solids. Toward the formation of new porous salts, halide binding also serves to incorporate charge on neutral cages and make them amenable to simple salt metathesis reactions to afford new porous salts based on anions and cations with intrinsic porosity. A combination of diffraction methods and a suite of spectroscopic tools confirms speciation of the isolated solids, which represent a new class of highly tunable porous salts. Ultimately, this work represents a roadmap for the preparation of new porous solids and showcases the utility and broad applicability of anion binding as a strategy for the synthesis of porous salts.

Synthesis of Turbostratic Boron Nitride: Effect of Urea Decomposition

Since the recent discovery of the template-free synthesis of porous boron nitride, research on the synthesis and application of the material has steadily increased. Nevertheless, the formation mechanism of boron nitride is not yet fully understood. Especially for the complex precursor decomposition of urea-based turbostratic boron nitride (t-BN), a profound understanding is still lacking. Therefore, in this publication, we investigate the influence of different common pre-heating temperatures of 100, 200, 300, and 400 °C on the subsequent properties of t-BN. We show that the structure and porosity of t-BN can be changed by preheating, where a predominantly mesoporous material can be obtained. Within these investigations, the sample BN-300/2 depicts the highest mesopore surface area of 242 m² g^-1 with a low amount of micropores compared to other BNs. By thermal gravimetric analysis, X-ray photoelectron spectroscopy, and Raman spectroscopy, valid details about the formation of intermediates, types of chemical bonds, and the generation of t-BN are delivered. Hence, we conclude that the formation of a mesoporous material arises due to a more complete decomposition of the urea precursor by pre-heating.

Purely Covalent Molecular Cages and Containers for Guest Encapsulation

Cage compounds offer unique binding pockets similar to enzyme-binding sites, which can be customized in terms of size, shape, and functional groups to point toward the cavity and many other parameters. Different synthetic strategies have been developed to create a toolkit of methods that allow preparing tailor-made organic cages for a number of distinct applications, such as gas separation, molecular recognition, molecular encapsulation, hosts for catalysis, etc. These examples show the versatility and high selectivity that can be achieved using cages, which is impossible by employing other molecular systems. This review explores the progress made in the field of fully organic molecular cages and containers by focusing on the properties of the cavity and their application to encapsulate guests.

Assembly of a Heterometallic Cu(II)-Pd(II) Cage by Post-assembly Metal Insertion

Porous structures based on multi-metallic motifs are receiving growing interest, but their general preparation still remains a challenge. Here, we report the self-assembly and structure of a Cu^II metal-organic cage (MOC) that is functionalized with free bis(pyrazolyl)methane sites. The homometallic Cu₄L₄ cage is isolated as a water-stable crystalline solid, and its formation is dependent on metal-ligand stoichiometry and the pre-organization of the Cu₂ paddlewheel. We show by X-ray diffraction and SEM-EDX that Pd^II chloride can be quantitatively inserted into the free chelating sites of the MOC to yield a [Cu₄(L(PdCl₂))₄] structure. Moreover, the solvent employed in the metalation dictates the solid-state isomerism of the heterometallic cage─a further handle to control the MOC's structural diversity and permanent porosity.

Broadband Dielectric Spectroscopic Detection of Ethanol: A Side-by-Side Comparison of ZnO and HKUST-1 MOFs as Sensing Media

The most common gas sensors are based on chemically induced changes in electrical resistivity and necessarily involve making imperfect electrical contacts to the sensing materials, which introduce errors into the measurements. We leverage thermal- and chemical-induced changes in microwave propagation characteristics (i.e., S-parameters) to compare ZnO and surface-anchored metal–organic-framework (HKUST-1 MOF) thin films as sensing materials for detecting ethanol vapor, a typical volatile organic compound (VOC), at low temperatures. We show that the microwave propagation technique can detect ethanol at relatively low temperatures (<100 °C), and afford new mechanistic insights that are inaccessible with the traditional dc-resistance-based measurements. In addition, the metrological technique avoids the inimical measurand distortions due to parasitic electrical effects inherent in the conductometric volatile organic compound detection.

Metal-Free Pyrene-Based Conjugated Microporous Polymer Catalyst Bearing N- and S-Sites for Photoelectrochemical Oxygen Evolution Reaction

The development of an efficient, sustainable, and inexpensive metal-free catalyst for oxygen evolution reaction (OER) via photoelectrochemical water splitting is very demanding for energy conversion processes such as green fuel generators, fuel cells, and metal-air batteries. Herein, we have developed a metal-free pyrene-based nitrogen and sulfur containing conjugated microporous polymer having a high Brunauer-Emmett-Teller surface area (761 m² g⁻¹) and a low bandgap of 2.09 eV for oxygen evolution reaction (OER) in alkaline solution. The π-conjugated as-synthesized porous organic material (PBTDZ) has been characterized by Fourier transform infrared spectroscopy (FT-IR), solid-state ¹³C (cross-polarization magic angle spinning-nuclear magnetic resonance) CP-MAS NMR, N₂ adsorption/desorption analysis, field-emission scanning electron microscope (FESEM), high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS) and thermogravimetric analysis (TGA) experiments. The material acts as an efficient catalyst for photoelectrochemical OER with a current density of 80 mA/cm² at 0.8 V vs. Ag/AgCl and delivered 104 µmol of oxygen in a 2 h run. The presence of low bandgap energy, π-conjugated conducting polymeric skeleton bearing donor heteroatoms (N and S), and higher specific surface area associated with inherent microporosity are responsible for this admirable photoelectrocatalytic activity of PBTDZ catalyst.

Evaluation of packing single and multiple atoms and molecules in the porous organic cage CC3-R

The absorption of multiple atoms and molecules, including Kr, Xe, CH₄, CO₂, C₂H₂, H₂O, and SF₆, within CC3-R, a Porous Organic Cage (POC), was calculated and analyzed. The CC3-R molecule has one central cavity and four window sites. Most adsorbents were modeled with either one unit in the central cavity, four units in the window sites, or with five units in both sites. For Xe, the most favorable site was the central one. The CO₂ molecule binds about 3 kcal mol^-1 in free energy more strongly than CH₄ in the central cavity of CC3-R at 300 K which may be enough to allow useful discrimination. Four C₂H₂ units and four CO₂ units are calculated to bind similarly inside CC3-R (ΔH(298 K) = -8.6 and -7.7 kcal mol^-1 per unit, respectively). Since H₂O is smaller, more waters can easily fit inside. For twelve water molecules, the binding enthalpy per water is ΔH(298 K) = -16.4 kcal mol^-1. For comparison, the binding enthalpy of (H₂O)₁₂ at the same level of theory (B3LYP/6-31G(d,p)-D3BJ//M06-2X/6-31G(d)) is predicted to be -12.3 kcal mol^-1 per water. Finally, the dimerization of CC3-R and the association of CC3-R with CC3-S was studied as well as 3 to 9 iodine atoms enclosed in CC3-R.

Stabilizing Porosity in Organic Cages through Coordination Chemistry

The number of studies concerning the permanent porosity of molecular materials, especially porous organic cages (POCs) and porous coordination cages (PCCs), have increased substantially over the past decade. The work presented here outlines novel approaches to the preparation of porous molecular structures upon metalation of nonporous, amine-based organic cages. Reduction of the well-known CC3 and CC1 imine-based POCs affords nonporous, highly flexible amine cages. These materials can be endowed with significant levels of structural rigidity via post-synthetic metalation of their ethylenediamine-type binding pockets. The hybrid metal-organic cages accessed through this approach combine aspects of POC and PCC chemistry, with structures of this type providing a potentially promising new direction for the design and development of porous molecular materials with tunability in overall charge, metal cation, porosity, and solubility.

Synthesis, characterization, and polymerization of capped paddlewheel porous cages

Although paddlewheel-based structures are common among permanently porous metal-organic materials, suitable strategies for the isolation of metal node-terminated, capped paddlewheel-based cage structures remain limited. We explored the use of chelating dicarboxylate ligand derivates (esp) for the isolation of trimesate-linked cages, Mo12(btc)4(esp)6, that are structural analogs of the small octahedral pore of HKUST-1. The porosity of these novel cages is appreciably higher than that of previously reported structures of this type. We also demonstrate that pillaring the isolated cage with DABCO generated an amorphous polymer that featured exceptional thermal stability and enhanced porosity.