Photophysics of 9,9-Dimethylacridan-Substituted Phenylstyrylpyrimidines Exhibiting Long-Lived Intramolecular Charge-Transfer Fluorescence and Aggregation-Induced Emission Characteristics

The role of branching in the ultrafast dynamics and two-photon absorption of two pyrimidine push-pull molecules

The dynamics and two-photon absorption (2PA) properties of two pyrimidine chromophores are studied using femtosecond time-resolved fluorescence and two-photon excited fluorescence techniques. The pyrimidine is used as an electron withdrawing group and is substituted at the C2 position with a phenylacridan fragment, while diphenylaministyryl donor moieties are appended at positions C4/6 to afford the pseudo-dipolar and pseudo-quadrupolar molecules 1 and 2, respectively. Chromophore 2 shows more efficient fluorescence emission, while 1 exhibits larger Stokes shifts. Their decay pathways are discussed through an emission from a Franck-Condon charge transfer (FC-CT) and a relaxed charge transfer (R-CT) state. Ultrafast dynamics in tetrahydrofuran show population of the R-CT state for 1 that is faster than solvation, while for 2, due to its pseudo-quadrupolar nature, R-CT population is slower and occurs from the solvated FC-CT state. Finally, molecule 2 shows better 2PA properties with cross sections reaching 560 GM at 820 nm.

Unlocking the Potential of Push-Pull Pyridinic Photobases: Aggregation-Induced Excited-State Proton Transfer

The pH effect on the photophysics of three push-pull compounds bearing dimethoxytriphenylamine (TPA-OMe) as electron donor and pyridine as electron acceptor, with different ortho-functionalization (-H, -Br, and -TPA-OMe), is assessed through steady-state and time-resolved spectroscopic techniques in DMSO/water mixed solutions and in water dispersions over a wide pH range. The enhanced intramolecular charge transfer upon protonation of the pyridinic ring leads to the acidochromic (from colorless to yellow) and acido(fluoro)chromic (from cyan to pink) behaviours of the investigated compounds. In dilute DMSO/buffer mixtures these molecules exhibited low pKa values (≤3.5) and extremely short singlet lifetimes. Nevertheless, it is by exploiting the aggregation phenomenon in aqueous environment that the practical use of these compounds largely expands: i) the basicity increases (pKa≈4.5) approaching the optimum values for pH-sensing in cancer cell recognition; ii) the fluorescence efficiencies are boosted due to Aggregation-Induced Emission (AIE), making these compounds appealing as fluorescent probes; iii) longer singlet lifetimes enable Excited-State Proton Transfer, paving the way for the application of these molecules as photobases (pKa*=9.1). The synergy of charge and proton transfers combined to the AIE behaviour in these pyridines allows tunable multi-responsive optical properties providing valuable information for the design of new light-emitting photobases.

Benchmarking luminescent properties of the arylvinylpyrimidine scaffold

The exploration of the photophysical properties of push-pull molecules incorporating pyrimidine rings as electron-attracting moieties in their structure continues to be a fascinating area of investigation. A thorough examination of these properties not only contributes to fundamental knowledge but also provides crucial insights for the rational design of emissive materials in prospective applications. In this context, this work conducts an in-depth analysis of four families of 4,6-bis(arylvinyl)pyrimidines, evaluating the influence of substituents on both the aryl groups and position 2 of the pyrimidine ring. While previous research has primarily focused on solution studies, this work emphasizes the importance of examining solid-state photophysics. Through a multidisciplinary approach encompassing optical techniques, x-ray diffraction, and quantum chemical calculations, a comprehensive understanding of the structure-property relationships is achieved. This study underscores the intricate interplay between molecular structure, aggregation, and fluorescence behavior in pyrimidines, offering valuable insights with broader implications beyond academic realms.

Exploring Through-Space Charge Transfer-Mediated Optoelectrochemical Properties of Dual-State Luminescent Aliphatic Polymers and Optoelectronic Responses toward Metal Ions

Herein, natural-synthetic hybrid dual-state luminescent conducting polymers (DLCPs/DLCP1-DLCP8) possessing significant optoelectrochemical properties are strategically developed by the polymerization of prop-2-enamide, cis-butenedioic acid, 2-acrylamido-2-methylpropane-1-sulfonic acid, and in situ-generated 2-(3-acrylamidopropanamido)-2-methylpropane-1-sulfonic acid alongside the grafting of gum tragacanth. The spectroscopic data of aliphatic DLCPs affirm DLCP7 as the most stable supramolecular assembly endowing optoelectronic properties. Computational calculations identified -C(═O)NH-, -C(═O)OH, -OH, and -SO3H as subluminophores. The absorption spectra, excitation wavelength-/solvent-polarity-/concentration-dependent luminescence, solid state luminescence, aggregation-induced enhanced luminescence, and time-correlated single photon count (TCSPC) studies confirm the occurrence of aggregation-mediated intramolecular through-space charge transfer (ITSCT) in the excited state of DLCP7. Mulliken charge, natural bond orbital, dipole moments, and electronic potential surface analyses confirm the charge donor-acceptor system in DLCP7. Furthermore, the selective optoelectronic response of DLCP7 toward Ca2+/Cu(II) at 438/574 nm is explored using ultraviolet-visible spectra, TCSPC analyses, a dynamic light scattering study, and computational investigations. The chelation-enhanced luminescence and ITSCT inhibition are responsible for turn-on and turn-off detections of Ca2+ and Cu(II), respectively. Cu(II) → Cu(I) reduction in a DLCP7 solution is inferred from electrochemical and spectroscopic analyses. The conductivities of 9.65 × 10-5 S cm-1 (solid state) and 44.35 × 10-5 S cm-1 (solution) in DLCP7 are validated by current-voltage and electrochemical impedance measurements. Again, strong electronic conductivities of 43.89 × 10-5 S cm-1 (solid state)/53.34 × 10-5 S cm-1 (solution) and 45.42 × 10-5 S cm-1 (solid state)/64.81 × 10-5 S cm-1 (solution) are observed in Ca2+-DLCP7 and Cu(II)-DLCP7, respectively.

Excited-State Dynamics of a Bright Fluorescent Dye with Precise Control of Emission Color Using Acid-Base Equilibrium, Intramolecular Charge Transfer, and Host-Guest Chemistry

A fluorescent dye, a dithiophene-conjugated benzothiazole derivative (DTBz), was prepared to have high fluorescence emission quantum yields (ΦF) across various organic solvents. Its emission color modulation, from bright blue to deep red, was achieved through intramolecular charge transfer (ICT), acid-base equilibrium, and host-guest chemistry. Although it exhibits a weak solvatochromic effect, DTBz exhibited a bright fluorescence emission around 480 nm upon excitation at 390 nm in most solvents. In polar solvents, such as MeOH (methanol), EtOH (ethanol), DMF (N,N-dimethylforamide), and DMSO (dimethyl sulfoxide), an additional ICT emission band emerged around 640 nm, notably intense in DMSO, resulting in a bright greenish-white emission (ΦF = 0.67). The addition of 1,8-diazabicyclo[5,4.0]undec-7-ene (DBU) altered emission characteristics, reducing emission from the local excited (LE) state and enhancing ICT state emission. The degree of emission spectral change saturation with DBU addition varied with the solvent nature. Polar solvents with high dielectric constants, like DMSO and DMF, saw a complete disappearance of LE state emission with 5 equiv of DBU, resulting in a deep red emission (ΦFs of 0.53 and 0.48, respectively). Femtosecond transient absorption spectroscopy and time-resolved photoluminescence measurements elucidated the excited-state dynamics, revealing a long-lived excited state (τ-H = 10.3 ns) at a lower energy emission (640 nm), identified as DTBz-*, supported by transient absorption spectra analysis. Further analysis, including time-resolved fluorescence decay measurements and time-dependent density-functional theory (TD-DFT) calculations, underscored the role of deprotonation of DTBz's hydroxyl group in promoting the ICT process. The CIE coordination plot demonstrated wide linear emission color changes upon successive DBU additions in all solvents, while emission color precision was achieved through host-guest chemistry. Emission changes induced by DBU were reverted to the original state upon beta-cyclodextrin (β-CD) addition, with the 1H NMR study revealing the competition between acid-base equilibrium and host-guest complex formation as the cause of emission color change.

Governing the emissive properties of 4-aminobiphenyl-2-pyrimidine push-pull systems via the restricted torsion of N,N-disubstituted amino groups

Donor-acceptor-substituted biphenyl derivatives are particularly interesting model compounds, which exhibit intramolecular charge transfer because of the extent of charge transfer between both substituents. The connection of a 4-[1,1'-biphenyl]-4-yl-2-pyrimidinyl) moiety to differently disubstituted amino groups at the biphenyl terminal can offer push-pull compounds with distinctive photophysical properties. Herein, we report a comprehensive study of the influence of the torsion angle of the disubstituted amino group on the emissive properties of two pull-push systems: 4-[4-(4-N,N-dimethylaminophenyl)phenyl]-2,6-diphenylpyrimidine (D1) and 4-[4-(4-N,N-diphenylaminophenyl)phenyl]-2,6-diphenylpyrimidine (D2). The torsion angle of the disubstituted amino group, either N,N-dimethyl-amine or N,N-diphenyl-amine, at the biphenyl end governs their emissive properties. A drastic fluorescence quenching occurs in D1 as the solvent polarity increases, whereas D2 maintains its emission independently of the solvent polarity. Theoretical calculations on D1 support the presence of a twisted geometry for the lowest energy, charge-transfer excited state (S1,90), which corresponds to the minimum energy structure in polar solvents and presents a small energy barrier to move from the excited to the ground state, thereby favoring the non-radiative pathway and reducing the fluorescence efficiency. In contrast, this twisted structure is absent in D2 due to the steric hindrance of the phenyl groups attached to the amine group, making the non-radiative decay less favorable. Our findings provide insights into the crucial role of the substituent in the donor moiety of donor-acceptor systems on both the singlet excited state and the intramolecular charge-transfer process.

Charge Transfer and Level Lifetime in Molecular Photon-Absorption upon the Quantum Impedance Lorentz Oscillator

On the strength of the new quantum impedance Lorentz oscillator (QILO) model, a charge-transfer method in molecular photon-absorption is proposed and imaged via the numerical simulations of 1- and 2-photon-absorption (1PA and 2PA) behaviors of the organic compounds LB3 and M4 in this paper. According to the frequencies at the peaks and the full width at half-maximums (FWHMs) of the linear absorptive spectra of the two compounds, we first calculate the effective quantum numbers before and after the electronic transitions. Thus, we obtain the molecular average dipole moments, i.e., 1.8728 × 10^-29 C·m (5.6145 D) for LB3 and 1.9626 × 10^-29 C·m (5.8838 D) for M4 in the ground state in the tetrahydrofuran (THF) solvent. Then, the molecular 2PA cross sections corresponding to wavelength are theoretically inferred and figured out by QILO. As a result, the theoretical cross sections turn out to be in good agreement with the experimental ones. Our results reveal such a charge-transfer image in 1PA near wavelength 425 nm, where an atomic electron of LB3 jumps from the ground-state ellipse orbit with the semimajor axis a_i = 1.2492 × 10^-10m = 1.2492 Å and semiminor axis b_i = 0.4363 Å to the excited-state circle (a_j = b_j = 2.5399 Å). In addition, during its 2PA process, the same transitional electron in the ground state is excited to the elliptic orbit with a_j = 2.5399 Å and b_j =1.3808 Å, in which the molecular dipole moment reaches as high as 3.4109 × 10^-29 C·m (10.2256 D). In addition, we obtain a level-lifetime formula with the microparticle collision idea of thermal motion, which indicates that the level lifetime is proportional (not inverse) to the damping coefficient or FWHM of an absorptive spectrum. The lifetimes of the two compounds at some excited states are calculated and presented. This formula may be used as an experimental method to verify 1PA and 2PA transition selection rules. The QILO model exhibits the advantage of simplifying the calculation complexity and reducing the high cost associated with the first principle in dealing with quantum properties of optoelectronic materials.

15N CP/MAS NMR as a Tool for the Mechanistic Study of Mechanical Stimuli-Responsive Materials: Evidence for the Conformational Change of an Emissive Dimethylacridane Derivative

Mechanochromic luminescent molecules are currently attracting considerable attention because of their promising technological applications, but understanding their mechanism of action is challenging and is thus hindering our deeper understanding of these materials. The conformational change of 9,9'-dimethyl-9,10-dihydroacridane derivative 1 was examined using solid-state ¹⁵N nuclear magnetic resonance (NMR) spectroscopic techniques without using a specifically ¹⁵N-labeled compound. A difference between the two conformers was clearly observed in the measurements and was assigned to the ⟨pl⟩ and ⟨bf⟩ spatial structures. The results were supported by quantum chemical calculations on ¹⁵N NMR chemical shifts of each isomer. The technique presented here can clearly identify the structural changes caused by crushing a powder sample. Such structural changes are difficult to determine using X-ray diffraction (XRD) measurements.

Methoxy substituent facilitated wide solvatofluorochromism, white light emission, polymorphism and stimuli-responsive fluorescence switching in donor-π-acceptor

Introducing methoxy substituent into triphenylamine-acetophenone based donor-π-acceptor fluorophore, 3-(4-(diphenylamino)phenyl)-1-phenylprop-2-en-1-one (1), produced strong solvatofluorochromism including white light emission, fluorescent polymorphs and mechano-responsive fluorescence switching. The unsubstituted and methoxy substituted compounds displayed strong solvent polarity mediated tunable emission in the solution. Interestingly, 3-(4-(diphenylamino)phenyl)-1-(4-methoxyphenyl)prop-2-en-1-one (2) and 3-(4-(diphenylamino)-2-methoxyphenyl)-1-(4-methoxyphenyl)prop-2-en-1-one (3) showed single molecule white light emission in DMSO and ethanol, respectively. 1-3 exhibited strong green/yellow fluorescence in the solid-state (Quantum yield (Φ_f) = 10 to 23%). 2 produced fluorescent polymorphs (green (2-G) and yellow (2-Y). Single crystal structural analysis revealed that donor and acceptor phenyl units adopted coplanar conformation in 2-G and 3 whereas twisted molecular conformation in 1 and 2-Y. Further, 2-G exhibited π…π interactions facilitated isolated dimers whereas 2-Y showed well separated molecules in the crystal lattice. Aggregation induced emission (AIE) studies showed morphological transformation induced fluorescence tuning for 2. The intramolecular charge transfer (ICT) from TPA to acetophenone was confirmed by computational studies. Mechanofluorochromic (MFC) studies of 1 showed only slight reduction of intensity without modulating fluorescence wavelength significantly but 2 and 3 exhibited visible emissive colour change from yellow to green and vice versa by crushing and heating. Both 2 and 3 also exhibited self-reversible fluorescence switching that was confirmed by PXRD pattern. Thus, methoxy group introduction resulted in obtaining white light emitting fluorescence molecules in the solution state and self-reversible fluorescence switching materials.

The arylvinylpyrimidine scaffold: a tunable platform for luminescent and optical materials

The incorporation of electron-withdrawing pyrimidine rings within π-extended systems allows access to a wide variety of fluorescent push-pull molecules that display emission properties highly sensitive to external stimuli. A suitable design of these compounds leads to interesting materials for a variety of optoelectronic applications. In this context, a vast number of arylvinylpyrimidine-based chromophores have been extensively studied during the last two decades. Along with the main synthetic pathways, this review summarizes the photophysical features of these active compounds having great potential and their most important applications as sensors and luminescence materials.

A Series of D-A-D Structured Disilane-Bridged Triads: Structure and Stimuli-Responsive Luminescence Studies

A series of σ-π extended octamethyltetrasilanes, which have phenothiazine, 9,9-dimethyl-9,10-dihydroacridine, or phenoxazine (1, 2, and 3) groups as donor moieties and thienopyrazine or benzothiadiazole (a and b) groups as acceptor fragments, has been prepared, and their optical properties have been studied as an extension of our work. All six compounds exhibited fluorescence in the solid state with maximum wavelengths centered in the range of 400 and 650 nm upon excitation by a UV lamp. Compound 2b showed apparent dual emission behavior in solution, which depends on solvent polarity, and a reversible photoluminescent change under mechanical and thermal stimuli in the solid state. Quantum chemical calculations suggest the contribution of a quasi-axial conformer of the 9,9-dimethyl-9,10-dihydroacridine moiety in 2b to the dual emission in solution and the mechanofluoroluminescence in the solid state, similarly to 1a. These studies provide new insight into the preparation of disilane-bridged triads capable of responding to multiple stimuli.

Synthesis, characterization, DFT, and TD-DFT studies of (E)-5-((4,6-dichloro-1,3,5-triazin-2-yl)amino)-4-hydroxy-3-(phenyldiazenyl)naphthalene-2,7-diylbis(hydrogen sulfite)

In this study, (E)-5-((4,6-dichloro-1,3,5-triazin-2-yl)amino)-4-hydroxy-3-(phenyldiazenyl)naphthalene-2,7-diylbis(hydrogen sulfite), a cyanurated H-acid (CHA) azo dye, was synthesized and characterized using FT-IR spectrophotometer and GC-MS spectroscopy. A density functional theory (DFT) based B3LYP and CAM-B3LYP method with 6–311 + G (d,p) basis set analysis was computed for HOMO-LUMO, natural bonding orbitals (NBO), UV-Vis absorptions and excitation interactions, in order to understand its molecular orbital excitation properties. A low Energy gap (Eg) of 2.947 eV was obtained from the molecular orbital analysis, which showed that HOMO to LUMO transition is highly feasible; hence CHA is adequate for diverse electronic and optic applications. Studies of the first five excitations (S0 → S1/S2/S3/S4/S5) of CHA revealed that S0 → S1 and S0 → S3 are π → π* type local excitations distributed around the –N=N– group; S0 → S2, a Rydberg type local excitation; S0 → S4, a highly localized π → π* excitation; while S0 → S5 is an n → π* charge transfer from a benzene ring to –N=N– group. From NBO analysis, we obtained the various donor–acceptor orbital interactions contributing to the stabilization of the studied compound. Most significantly, some strong hyper-conjugations (n → n*) within fragments, and non-bondingand anti-bonding intermolecular (n → n*/π* and π → n*/π*) interactions were observed to contribute appreciable energies. This study is valuable for understanding the molecular properties of the azo dyes compounds and for synthesizing new ones in the future.

Photophysical and semiconducting properties of isomeric triphenylimidazole derivatives with a benzophenone moiety

New isomeric compounds with imidazole and benzophenone moieties were synthesized and their thermal, photophysical, electrochemical and carrier mobilities have been analyzed.