The Prospect of Dimensionality in Porous Semiconductors

Multicomponent Synthesis of Imidazole-Linked Fully Conjugated 3D Covalent Organic Framework for Efficient Electrochemical Hydrogen Peroxide Production

The semiconducting properties and applications of three dimensional (3D) covalent organic frameworks (COFs) are greatly hampered because of their long-ranged non-conjugated skeletons and relatively unstable linkages. Here, a robust imidazole-linked fully conjugated 3D covalent organic framework (BUCT-COF-7) is synthesized through the one-pot multicomponent Debus-Radziszewski reaction of the saddle-shaped aldehyde-substituted cyclooctatetrathiophene, pyrene-4,5,9,10-tetraone, and ammonium acetate. The semiconducting BUCT-COF-7, as a metal-free catalyst, shows excellent two electron oxygen reduction reaction (ORR) activity in alkaline medium with high hydrogen peroxide (H2 O2 ) selectivity of 83.4 %. When the BUCT-COF-7 as cathode catalyst is assembled into the electrolyzer, the devices showed high electrochemical production rate of H2 O2 up to 326.9 mmol g-1 h-1 . The accumulative amount of H2 O2 could totally degrade the dye methylene blue via Fenton reaction for wastewater treatment. This is the first report about intrinsic 3D COFs for efficient electrochemical synthesis of H2 O2 , revealing the promising applications of fully conjugated 3D COFs in the environment-related field.

Designing Thiophene-Enriched Fully Conjugated 3D Covalent Organic Framework as Metal-Free Oxygen Reduction Catalyst for Hydrogen Fuel Cells

The application of three-dimensional (3D) covalent organic frameworks (COFs) in renewable energy fields is greatly limited due to their non-conjugated skeletons. Here, we design and successfully synthesize a thiophene-enriched fully conjugated 3D COF (BUCT-COF-11) through an all-thiophene-linked saddle-shaped building block (COThTh-CHO). The BUCT-COF-11 exhibits excellent semiconducting property with intrinsic metal-free oxygen reduction reaction (ORR) activity. Using the COF as cathode catalyst, the assembled anion-exchange membrane fuel cells (AEMFCs) exhibited a high peak power density up to 493 mW cm^-2 . DFT calculations reveal that thiophene introduction in the COF not only improves the conductivity but also optimizes the electronic structure of the sample, which therefore boosts the ORR performance. This is the first report on the application of COFs as metal-free catalysts in fuel cells, demonstrating the great potential of fully conjugated 3D COFs as promising semiconductors in energy fields.

Nickel-Catalyzed Direct Arylation Polymerization for the Synthesis of Thiophene-Based Cross-linked Polymers

An earth-abundant nickel(II) bipyridine catalyst, combined with lithium hexamethyldisilazide as base, demonstrates its wide applicability in the direct arylation polymerization of di- and tri-thiophene heteroaryls with poly(hetero)aryl halides. With a nickel catalyst loading of 2.5 mol%, a series of twenty highly cross-linked organic polymers is obtained in 34 to 99 % yields. Using mixed polytopic coupling partners allows obtaining alternating and optically active thiophene-based solids with intrinsic porosity.

Porous organic polymers in solar cells

Owing to their unique porosity and large surface area, porous organic polymers (POPs) have shown their presence in numerous novel applications. The tunability and functionality of both the pores and backbone of the material enable its suitability in photovoltaic devices. The porosity induced host-guest configurations as well as periodic donor-acceptor structures benefit the charge separation and charge transfer in photophysical processes. The role of POPS in other critical device components, such as hole transporting layers and electrodes, has also been demonstrated. Herein, this review will primarily focus on the recent progress made in applying POPs for solar cell device performance enhancement, covering organic solar cells, perovskite solar cells, and dye-sensitized solar cells. Based on the efforts in recent years in unraveling POP's photophysical process and its relevance with device performances, an in-depth analysis will be provided to address the gradual shift of attention from an entirely POP-based active layer to other device functional components. Combining the insights from device physics, material synthesis, and microfabrication, we aim to unfold the fundamental limitations and challenges of POPs and shed light on future research directions.

Fully Conjugated Tetraoxa[8]circulene-Based Porous Semiconducting Polymers

Tetraoxa[8]circulenes (TOCs) are a class of hetero[8]circulenes featuring a planar cyclooctatetraene core with a mixed aromatic/antiaromatic motif that governs their electronic properties. Polymeric TOCs (pTOCs) have been the subject of several computational simulations because they are predicted to be low-band-gap semiconductors, but they have not been available synthetically yet. Here, we report the first example of pTOCs, a new family of porous semiconductors, synthesized under ionothermal conditions through the intermolecular cyclization of 1,4,5,8-anthracene tetrone. pTOCs are porous, with surface areas up to 1656 m²  g^-1 , and exhibit light-switchable and tunable semiconducting properties.

Solution-Processable Semiconducting Conjugated Planar Network

After the emergence of graphene in the material science field, top-down and bottom-up studies to develop semiconducting organic materials with layered structures became highly active. However, most of them have suffered from poor processability, which hampers device fabrication and frustrates practical applications. Here, we suggest an unconventional approach to fabricating semiconducting devices, which avoids the processability issue. We designed a soluble amorphous network using a solution process to form a thin film on a substrate. We then employed heat treatment to develop a flattened organic structure in the thin film, as an active layer for organic thin-film transistors (TFTs). The fabricated TFTs showed good performance in both horizontal and vertical charge transport, suggesting a versatile and useful approach for the development of organic semiconductors.

A Three-Dimensional sp2 Carbon-Conjugated Covalent Organic Framework

A first example of an sp² carbon-conjugated three-dimensional (3D) covalent organic framework (COF) (BUCT-COF-4) is synthesized via the Knoevenagel condensation of the saddle-shaped aldehyde-substituted cyclooctatetrathiophene and 1,4-phenylenediacetonitrile. Ascribed to the extended π-conjugation and long-range ordered structures, BUCT-COF-4 displays high Hall electron mobility of 1.97 cm² V^-1 s^-1 at room temperature. After it is doped with iodine, the material not only exhibits an enhanced electron mobility up to 2.62 cm² V^-1 s^-1 in ambient air but also presents an unexpected metal-free ferromagnetic phase transition arising from the formation of aligned spins unidirectional across the whole sp² carbon-conjugated 3D framework. This is the first report of a ferromagnetic phenomenon in 3D COF materials, which would broaden promising applications and open a new frontier in COF materials.

Saddle-Shaped Building Blocks: A New Concept for Designing Fully Conjugated 3D Organic Semiconducting Materials

Currently, most organic semiconducting materials (OSMs) are π-conjugated structures in one or two dimension (2D), where the lack of layer-layer π-conjugation connection greatly blocks their electron delocalization and transport. The 3D fully conjugated materials could solve this issue because they can provide efficient charge-transport pathways throughout the whole 3D skeleton, in which the suitable 3D building block is the key to the development of fully conjugated 3D OSMs. Cyclooctatetraene (COT) and its derivatives are good candidates due to their π-conjugation with 3D saddle-shaped architecture. In this Concept, we discuss the key features of saddle-shaped COT-based derivatives and their synthetic strategy, then we present the current development of using the COT derivatives as building blocks to construct the 3D fully conjugated organic small compound- and polymer-based OSMs. The properties and perspectives of these OSMs in photovoltaics, electro-catalysis and electrical conductivities are also discussed. These recent advances in the developing 3D fully conjugated materials could potentially open up a new frontier in the design of OSMs.