A facile fluorescence method for the effective detection of ampicillin using antioxidant carbon dots with specific fluorescent response to ˙OH

Monitoring methods for beta-lactam (β-lactam) antibiotics, especially for ampicillin (AMP), with simple operation and sensitivity for realtime applications are highly required. To address this need, antioxidant carbon dots (E-CDs) with excellent fluorescence properties were synthesized using citric acid and ethylenediamine as raw materials. With a quantum yield of 81.97%, E-CDs exhibited a specific and sensitive response to ˙OH. The quenched fluorescence of E-CDs by the formed ˙OH could be restored through a competition reaction with AMP. Leveraging the signal-quenching strategy of E-CDs, H2O2, and Fe2+, a fluorescence signal-on strategy was developed using AMP as the fluorescence recovery agent for the sensitive detection of AMP. The mechanism of the quenching of E-CDs by ˙OH was attributed to the damaging effect of ˙OH on E-CDs. Under optimal conditions, the detection limit of this method for AMP was determined to be 0.38 μg mL-1. This method was successful in drug quality control and the spiked detection of AMP in lake water, milk, and sea cucumber, presenting a viable option for convenient and rapid antibiotic monitoring methods.

Recent Progress in Folic Acid Detection Based on Fluorescent Carbon Dots as Sensors: A Review

Folic acid (FA) is a water-soluble vitamin found in diverse natural sources and is crucial for preserving human health. The risk of health issues due to FA deficiency underscores the need for a straightforward and sensitive FA detection methodology. Carbon dots (CDs) have gained significant attention owing to their exceptional fluorescence performance, biocompatibility, and easy accessibility. Consequently, numerous research studies have concentrated on developing advanced CD fluorescent probes to enable swift and precise FA detection. Despite these efforts, there is still a requirement for a thorough overview of the efficient synthesis of CDs and their practical applications in FA detection to further promote the widespread use of CDs. This review paper focuses on the practical applications of CD sensors for FA detection. It begins with an in-depth introduction to FA and CDs. Following that, based on various synthetic approaches, the prepared CDs are classified into diverse detection methods, such as single sensing, visual detection, and electrochemical methods. Furthermore, persistent challenges and potential avenues are highlighted for future research to provide valuable insights into crafting effective CDs and detecting FA.

Highly Efficient Loading of Procaine on Water-Soluble Carbon Dots toward Long-Acting Anesthesia

Safe and efficient local anesthetic delivery carriers are crucial for long-term anesthesia and analgesics in clinical treatment. But currently, most of the local anesthetic carriers still have some disadvantages such as low drug-loading capacity, drug leakage, and potential side effects. Here, we report red-emissive carbon dots (Cys-CDs) synthesized by choosing cysteine and citric acid as precursors, which contain a large and intact sp2-domain with rich hydrophilic groups around the edge. The special structure of Cys-CDs is conducive to the efficient loading of procaine (PrC) via strong π-π stacking interactions. Based on the strong noncovalent interactions between them, the PrC loaded on Cys-CDs achieved slow release in vitro and had a long-lasting nerve blocking effect in vivo, which is 4-fold more than that of free PrC. More importantly, PrC/Cys-CDs do not cause any toxicity and inflammation during treatment owing to slow release of PrC and good water solubility of Cys-CDs, thus demonstrating the potential clinical application of CDs in long-lasting analgesia.

Carbon Nanomaterials for Biomedical Applications: Progress and Outlook

Recent developments in nanoscale materials have found extensive use in various fields, especially in the biomedical industry. Several substantial obstacles must be overcome, particularly those related to nanostructured materials in biomedicine, before they can be used in therapeutic applications. Significant concerns in biomedicine include biological processes, adaptability, toxic effects, and nano-biointerfacial properties. Biomedical researchers have difficulty choosing suitable materials for drug carriers, cancer treatment, and antiviral uses. Carbon nanomaterials are among the various nanoparticle forms that are continually receiving interest for biomedical applications. They are suitable materials owing to their distinctive physical and chemical properties, such as electrical, high-temperature, mechanical, and optical diversification. An individualized, controlled, dependable, low-carcinogenic, target-specific drug delivery system can diagnose and treat infections in biomedical applications. The variety of carbon materials at the nanoscale is remarkable. Allotropes and other forms of the same element, carbon, are represented in nanoscale dimensions. These show promise for a wide range of applications. Carbon nanostructured materials with exceptional mechanical, electrical, and thermal properties include graphene and carbon nanotubes. They can potentially revolutionize industries, including electronics, energy, and medicine. Ongoing investigation and expansion efforts continue to unlock possibilities for these materials, making them a key player in shaping the future of advanced technology. Carbon nanostructured materials explore the potential positive effects of reducing the greenhouse effect. The current state of nanostructured materials in the biomedical sector is covered in this review, along with their synthesis techniques and potential uses.

Fe-codoped carbon dots serving as a peroxidase mimic to generate in situ hydrogen peroxide for the visual detection of glucose

Nanozyme technology has gained significant regard and been successfully implemented in various applications including chemical sensing, bio-medicine, and environmental monitoring. Fe-CDs were synthesized and characterized well in this study. As compared to HRP (3.7 mM), the Fe-CDs exhibited a higher affinity towards H2O2 (0.2 mM) using the steady-state kinetic assay and stronger catalytic capability by changing the color of TMB to the blue color of the oxidized state, oxTMB. Additionally, an efficient peroxidase mimic, Fe-CDs/GOx, based on the hybrid cascade system to produce in situ H2O2 for the visual detection of glucose (color change: colorless to blue, and then to green), has been developed in detail, with limits of detection (LODs) for H2O2 and glucose of 0.33 μM and 1.17 μM, respectively. The changes further demonstrate a linear relationship between absorbance and H2O2 concentration, ranging from 10 to 60 μM, and for glucose (1 to 60 μM). To assess the accuracy and detection capability of the Fe-CDs/GOx system, we evaluated a real human serum sample obtained from adult males in a local hospital. In conclusion, Fe-CDs serving as a peroxidase mimic have the potential for various applications in the fields of biomedicine and nanozymes.

Ziziphus mauritiana-derived nitrogen-doped biogenic carbon dots: Eco-friendly catalysts for dye degradation and antibacterial applications

In this study, the naturally available Ziziphus Mauritiana was used as a bioresource for the preparation of bifunctional nitrogen doped carbon dots (N-CDs). The doping of nitrogen into the graphitic carbon skeleton and the in-situ formation of N-CDs were systematically identified by the various structural and morphological studies. The green fluorescent N-CDs were used as active catalysts for the removal of Safranin-O dye and achieved 79 % removal efficiency. Furthermore, the prepared N-CDs were used to evaluate antibacterial activity with four different bacterial species, such as Shigella flexneri, Staphylococcus aureus, Streptococcus pyogenes, and Klebsiella pneumoniae. Amongst these, the highest antimicrobial activity was achieved against Klebsiella pneumonia, with a maximum zone of inhibition of 14.6 ± 1.12 at a concentration of 100 g mL-1. Thus, the obtained results demonstrate the cost efficient bifunctional application prospects of N-CDs to achieve significant catalytic and antibacterial activities.

Design of carbon dots for bioimaging and behavior regulation of stem cells

Carbon dots (CDs) have been widely used in bioimaging, biosensing and biotherapy because of their good biocompatibility, optical properties and stability. In this review, we comprehensively summarize the research on CDs in terms of synthesis methods, optical properties and biotoxicity. We describe and envisage the directions for CDs application in stem cell imaging and differentiation, with the aim of stimulating the design of future related CDs. We used 'carbon dots', 'stem cells', 'cell imaging', 'cell differentiation' and 'fate control' as keywords to search for important articles. The Web of Science database was used to extract vital information from a total of 357 papers, 126 review articles and 231 article proceedings within 12 years (2011-2022).

Planted Graphene Quantum Dots for Targeted, Enhanced Tumor Imaging and Long-Term Visualization of Local Pharmacokinetics

While photoluminescent graphene quantum dots (GQDs) have long been considered very suitable for bioimaging owing to their protein-like size, superhigh photostability and in vivo long-term biosafety, their unique and crucial bioimaging applications in vivo remain unreachable. Herein, planted GQDs are presented as an excellent tool for in vivo fluorescent, sustainable and multimodality tumor bioimaging in various scenarios. The GQDs are in situ planted in the poly(ethylene glycol) (PEG) layer of PEGylated nanoparticles via a bottom-up molecular approach to obtain the NPs-GQDs-PEG nanocomposite. The planted GQDs show more than four times prolonged blood circulation and 7-8 times increased tumor accumulation than typical GQDs in vivo. After accessible specificity modification, the multifunctional NPs-GQDs-PEG provides targeted, multimodal molecular imaging for various tumor models in vitro or in vivo. Moreover, the highly photostable GQDs enable long-term, real-time visualization of the local pharmacokinetics of NPs in vivo. Planting GQDs in PEGylated nanomedicine offers a new strategy for broad in vivo biomedical applications of GQDs.

Multifunctional Carbon-Based Nanoparticles: Theranostic Applications in Cancer Therapy and Diagnosis

Cancer diagnosis and treatment are the most critical challenges in modern medicine. Conventional cancer treatments no longer meet the needs of the health field due to the high rate of mutations and epigenetic factors that have caused drug resistance in tumor cells. Hence, the search for unique methods and factors is quickly expanding. The development of nanotechnology in medicine and the search for a system to integrate treatment and diagnosis to achieve an effective approach to overcome the known limitations of conventional treatment methods have led to the emergence of theranostic nanoparticles and nanosystems based on these nanoparticles. An influential group of these nanoparticles is carbon-based theranostic nanoparticles. These nanoparticles have received significant attention due to their unique properties, such as electrical conductivity, high strength, excellent surface chemistry, and wide range of structural diversity (graphene, nanodiamond, carbon quantum dots, fullerenes, carbon nanotubes, and carbon nanohorns). These nanoparticles were widely used in various fields, such as tissue engineering, drug delivery, imaging, and biosensors. In this review, we discuss in detail the recent features and advances in carbon-based theranostic nanoparticles and the advanced and diverse strategies used to treat diseases with these nanoparticles.

Carbon Dots with Guanidinium and Amino Acid Functional Groups for Targeted Small Interfering RNA Delivery toward Tumor Gene Therapy

Small interfering RNA (siRNA)-based gene therapy represents a promising strategy for tumor treatment. Novel gene vectors that can achieve targeted delivery of siRNA to the tumor cells without causing any side effects are urgently needed. To this end, the large amino acid mimicking carbon dots with guanidinium functionalization (LAAM GUA-CDs) are designed and synthesized by choosing arginine and dopamine hydrochloride as precursors. LAAM GUA-CDs can load siRNA through the multiple hydrogen bonds between their guanidinium groups and phosphate groups in siRNA. Meanwhile, the amino acid groups at the edges of LAAM GUA-CDs endow them the capacity to target tumors. After loading siBcl-2 as a therapeutic agent, LAAM GUA-CDs/siBcl-2 has a high tumor inhibition rate of up to 68%, which is twice more than that of commercial Lipofectamine 2000. Furthermore, LAAM GUA-CDs do not cause side effect during antitumor treatment owing to their high tumor-targeting ability, thus providing a versatile strategy for tumor-targeted siRNA delivery and cancer therapy.

Carbon dots derived from peptone as "off-on" fluorescent probes for the detection of oxalic acid

A simple and rapid microwave heating approach was reported for the preparation of water soluble carbon dots (CDs) using peptone as carbon source with the assistance of ethylenediamine. Several characterization techniques such as transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) were employed to analyze CDs. The optical properties of synthesized CDs were examined by UV-vis and fluorescence spectroscopy. The CDs exhibit strong blue emission under 365 nm UV lamp and have the excitation and pH (2.0-12.0) dependent emission behavior. The fluorescence intensity of CDs can be selectively quenched by Co²⁺ via dynamic mechanism, while the addition of oxalic acid (OA) results in a remarkable recovery of the fluorescence intensity due to the strong coordination binding between oxalic acid and Co²⁺. Hence, the prepared CDs can conveniently serve as "off-on" fluorescent probes for highly sensitive determination of oxalic acid. The wide linear range is 0.5-70 mg/L with a low detection limit of 0.288 mg/L. Furthermore, the probes were successfully applied to detect oxalic acid in tomato and cherry tomato samples with the recovery of 96.4 %-106.4 % and the relative standard deviation lower than 0.25 %.

The Transformation of 0-D Carbon Dots into 1-, 2- and 3-D Carbon Allotropes: A Minireview

Carbon dots (CDs) represent a relatively new type of carbon allotrope with a 0-D structure and with nanoparticle sizes < 10 nm. A large number of research articles have been published on the synthesis, characteristics, mechanisms and applications of this carbon allotrope. Many of these articles have also shown that CDs can be synthesized from “bottom-up” and “top-down” methods. The “top-down” methods are dominated by the breaking down of large carbon structures such as fullerene, graphene, carbon black and carbon nanotubes into the CDs. What is less known is that CDs also have the potential to be used as carbon substrates for the synthesis of larger carbon structures such as 1-D carbon nanotubes, 2-D or 3-D graphene-based nanosheets and 3-D porous carbon frameworks. Herein, we present a review of the synthesis strategies used to convert the 0-D carbons into these higher-dimensional carbons. The methods involve the use of catalysts or thermal procedures to generate the larger structures. The surface functional groups on the CDs, typically containing nitrogen and oxygen, appear to be important in the process of creating the larger carbon structures that typically are formed via the generation of covalent bonds. The CD building blocks can also ‘aggregate’ to form so called supra-CDs. The mechanism for the formation of the structures made from CDs, the physical properties of the CDs and their applications (for example in energy devices and as reagents for use in medicinal fields) will also be discussed. We hope that this review will serve to provide valuable insights into this area of CD research and a novel viewpoint on the exploration of CDs.

An insight into the potentials of carbon dots for in vitro live-cell imaging: recent progress, challenges, and prospects

Carbon dots (CDs) are a strong alternative to conventional fluorescent probes for cell imaging due to their brightness, photostability, tunable fluorescence emission, low toxicity, inexpensive preparation, and chemical diversity. Improving the targeting efficiency by modulation of the surface functional groups and understanding the mechanisms of targeted imaging are the most challenging issues in cell imaging by CDs. Firstly, we briefly discuss important features of fluorescent CDs for live-cell imaging application in this review. Then, the newest modulated CDs for targeted live-cell imaging of whole-cell, cell organelles, pH, ions, small molecules, and proteins are elaborately discussed, and their challenges in these fields are explained.

Solid-State Red Laser with a Single Longitudinal Mode from Carbon Dots

Miniaturized solid-state lasers with a single longitudinal mode are vital for various photonic applications. Here we prepare red-emissive carbon dots (CDs) with a photoluminescence quantum yield (PLQY) of 65.5 % by combining graphitic nitrogen doping and surface modification. High-concentration doping alters the CDs' emission from blue to red, while the electron-donating groups and polymer coating on their surfaces improve the PLQY and photostability. The CDs exhibit excellent stimulated emission characteristics, with a low threshold of amplified spontaneous emission (ASE) and long gain lifetime. A planar microcavity with only one resonant mode, which fitted with the CDs' ASE peak, was constructed. Combining the CDs and microcavity produced a solid-state laser with a single longitudinal mode, a linewidth of 0.14 nm and a signal-to-noise ratio of 14.8 dB (Q∼4600). Our results will aid the development of colorful solid-state micro/nano lasers with potential use in practical photonics.