A study of the growth process of Co3O4microcrystals synthesized via a hydrothermal method

Lattice B-doping evolved ferromagnetic perovskite-like catalyst for enhancing persulfate-based degradation of norfloxacin

Series of B-doped perovskite-like materials CeCu_0.5Co_0.5O₃ (B-C³O) were fabricated with unique ferromagnetic property due to partial substitution of non-magnetic 2p-impurities boron in the lattice. Then, B-C³O was used for activating peroxymonosulfate (PMS) for the degradation of norfloxacin (NOR), one kind of emerging pollutants with the concentration level up to mg/L in wastewaters. The results indicated that 5.0% B-C³O exhibited stable catalytic ability at pH 3.0-9.0 and high degradation efficiency in co-existing inorganic Cl^-, SO₄^2-, NO₃^-, H₂PO₄^- and organic humic acid. Non-radical ¹O₂, radicals •OH and SO₄^•-, as well as ClO^- were detected with synergy effect for NOR degradation. By quantifying free radicals, •OH with 0.52 µM and SO₄^•- with 10.91 µM were obtained at 180 min, verifying the leading role of SO₄^•-. The degradation process involved the defluorination and decarboxylation, as well as opening of quinolone and piperazinyl rings. Adopting alfalfa as the model plant, the toxicity effect before and after NOR degradation was finally evaluated with seed germination rate and chlorophyll content as the physiological indicators. In summary, non-metal B-doping not only provides a creative strategy for the development of ferromagnetic perovskite-like materials, but also affords excellent catalysts for aiding the advanced oxidation technology for removal of emerging pollutants in wastewaters.

Mechanochemically Prepared Co3O4-CeO2 Catalysts for Complete Benzene Oxidation

Considerable efforts to reduce the harmful emissions of volatile organic compounds (VOCs) have been directed towards the development of highly active and economically viable catalytic materials for complete hydrocarbon oxidation. The present study is focused on the complete benzene oxidation as a probe reaction for VOCs abatement over Co3O4-CeO2 mixed oxides (20, 30, and 40 wt.% of ceria) synthesized by the more sustainable, in terms of less waste, less energy and less hazard, mechanochemical mixing of cerium hydroxide and cobalt hydroxycarbonate precursors. The catalysts were characterized by BET, powder XRD, H2-TPR, UV resonance Raman spectroscopy, and XPS techniques. The mixed oxides exhibited superior catalytic activity in comparison with Co3O4, thus, confirming the promotional role of ceria. The close interaction between Co3O4 and CeO2 phases, induced by mechanochemical treatment, led to strained Co3O4 and CeO2 surface structures. The most significant surface defectiveness was attained for 70 wt.% Co3O4-30 wt.% CeO2. A trend of the highest surface amount of Co3+, Ce3+ and adsorbed oxygen species was evidenced for the sample with this optimal composition. The catalyst exhibited the best performance and 100% benzene conversion was reached at 200 °C (relatively low temperature for noble metal-free oxide catalysts). The catalytic activity at 200 °C was stable without any products of incomplete benzene oxidation. The results showed promising catalytic properties for effective VOCs elimination over low-cost Co3O4-CeO2 mixed oxides synthesized by simple and eco-friendly mechanochemical mixing.

Preparative History vs Driving Force in Water Oxidation Catalysis: Parameter Space Studies of Cobalt Spinels

The development of efficient, stable, and economic water oxidation catalysts (WOCs) is a forefront topic of sustainable energy research. We newly present a comprehensive three-step approach to systematically investigate challenging relationships among preparative history, properties, and performance in heterogeneous WOCs. To this end, we studied (1) the influence of the preparative method on the material properties and (2) their correlation with the performance as (3) a function of the catalytic test method. Spinel-type Co3O4 was selected as a clear-cut model WOC and synthesized via nine different preparative routes. In search of the key material properties for high catalytic performance, these cobalt oxide samples were characterized with a wide range of analytical methods, including X-ray absorption spectroscopy, X-ray photoelectron spectroscopy, powder X-ray diffraction, Raman spectroscopy, BET surface area analysis, and transmission electron microscopy. Next, the corresponding catalytic water oxidation activities were assessed with the three most widely applied protocols to date, namely, photocatalytic, electrocatalytic, and chemical oxidation. The activity of the Co3O4 samples was found to clearly depend on the applied test method. Increasing surface area and disorder as well as a decrease in oxidation states arising from low synthesis temperatures were identified as key parameters for high chemical oxidation activity. Surprisingly, no obvious property-performance correlations were found for photocatalytic water oxidation. In sharp contrast, all samples showed similar activity in electrochemical water oxidation. The substantial performance differences between the applied protocols demonstrate that control and comprehensive understanding of the preparative history are crucial for establishing reliable structure-performance relationships in WOC design.

Electrochemical oxidation and advanced oxidation processes using a 3D hexagonal Co3O4 array anode for 4-nitrophenol decomposition coupled with simultaneous CO2 conversion to liquid fuels via a flower-like CuO cathode

A novel electrocatalytic system was developed to realize one-pot conversion of organic pollutants into liquid fuels such as methanol (CH₃OH) and ethanol (C₂H₅OH). The process combines the catalytic oxidation of organic pollutants with electrocatalytic reduction of CO₂. We first coupled the electrocatalytic process with SO₄^•--based advanced oxidation processes (AOPs) for the degradation of 4-nitrophenol (4-NP) using a 3D-hexagonal Co₃O₄ anode. In this step, 4-NP was mineralized to CO₂, and then the CO₂ was converted to CH₃OH and C₂H₅OH by electrocatalytic reduction using a flower-like CuO cathode. The experimental results show the destruction of 4-NP (60 mL, 10 mg/L) can be as high as 99%. In addition, the yields of CH₃OH and C₂H₅OH were 98.29 μmol/L and 40.95 μmol/L, respectively, which represents a conversion of 41.8% of 4-NP into liquid fuels; the electron efficiency was 73.1%. In addition, we found that 3D-hexagonal arrays of Co₃O₄ with different morphologies can be obtained by adding different amounts of urea. We also investigated the formation mechanism of novel 3D-hexagonal Co₃O₄ arrays for the first time. A mechanism was proposed to explain the electrocatalytic steps involved in the conversion of 4-NP to CH₃OH and C₂H₅OH and the synergetic effects between AOPs and electrocatalysis.

Leaf-like Co-ZIF-L derivatives embedded on Co2AlO4/Ni foam from hydrotalcites as monolithic catalysts for toluene abatement

Herein, a series of distinctively monolithic catalysts were first synthesized by decorating leaf-like Co-ZIF-L derivatives on Co₂AlO₄ coral-like microspheres from CoAl layered double hydroxides (LDHs), which were coated on three-dimensional porous Ni foam. As a proof of concept application, toluene was chosen as a probe molecule to evaluate their catalytic performances over the as-synthesized catalysts. As a result, the L-12 sample derived from Co₂AlO₄@Co-Co LDHs displayed an excellent catalytic performance, cycling stability and long-term stability for toluene oxidation (T₉₉ = 272 °C, 33 °C lower than that of Co₂AlO₄ sample), where leaf-like Co-ZIF-L served as a sacrificial template to synthesize Co-Co LDHs. The improved catalytic performance was attributed to its distinctive structure, in which leaf-like Co-ZIF-L derivatives on Co₂AlO₄ resulted in its higher specific surface area, lower-temperature reducibility, rich surface oxygen vacancy and high valence Co³⁺ species. This work thus demonstrates a feasible strategy for the design and fabrication of hybrid LDHs/ZIFs-derived composite architectures, which is expected to construct other novel monolithic catalysts with hierarchical structures for other potential applications.

Synthesis, crystal structure, and characterization of cyclohexylammonium tetraisothiocyanatocobaltate(II): A single-source precursor for cobalt sulfide and oxide nanostructures

We successfully synthesized 3D supramolecular structure of cyclohexylammonium tetraisothiocyanatocobaltate(II) complex, (C6H11NH3)2[Co(NCS)4], in almost a quantitative yield by using metathesis and ligand addition reactions. The new complex was characterized by various techniques such as FTIR, UV-Visible, PXRD, SXRD, and CV electrochemical analysis to investigate mainly its structure. Based on the results of these techniques, the formation of the desired complex was confirmed. The TGA for this complex indicated the utilization of this complex as a single-source precursor for the synthesis of cobalt sulfide (CoS) under helium atmosphere and tricobalt tetraoxide (Co3O4) under air. Investigation of pyrolysis products by PXRD proved the formation of CoS and Co3O4. Furthermore, morphology studies by SEM and TEM displayed the formation of CoS and Co3O4 nanoparticles with various shapes.

Coffee-Waste Templating of Metal Ion-Substituted Cobalt Oxides for the Oxygen Evolution Reaction

A facile and scalable method using coffee waste grounds as a hard template has been developed to fabricate nanostructured Co₃ O₄ for the oxygen evolution reaction (OER). Co₃ O₄ incorporating metals with different valences (M/Co=1:4; M=Cu, Ni, Fe, Cr, and W) were also prepared with similar sheet-like structures comprising nanosized crystallites. After detailed characterization by X-ray diffraction, electron microscopy, and nitrogen sorption, the oxides were employed as OER electrocatalysts. Substitution of octahedral and tetrahedral sites of the spinel structure with divalent and trivalent transition metals (Cu, Ni, Fe, and Cr) increased the activity of Co₃ O₄ for the OER, whereas incorporation of hexavalent W led to formation of a second crystal phase and significantly higher electrocatalytic performance. Furthermore, this method is easily scaled up for mass production of Co₃ O₄ with the same nanostructure, which is highly desirable for large-scale application.