Molybdenum Carbide Nanoparticles on Carbon Nanotubes and Carbon Xerogel: Low-Cost Cathodes for Hydrogen Production by Alkaline Water Electrolysis

Steps towards highly-efficient water splitting and oxygen reduction using nanostructured β-Ni(OH)2

β-Ni(OH)2 nanoplatelets are prepared by a hydrothermal procedure and characterized by scanning and transmission electron microscopy, X-ray diffraction analysis, Raman spectroscopy, and X-ray photoelectron spectroscopy. The material is demonstrated to be an efficient electrocatalyst for oxygen reduction, oxygen evolution, and hydrogen evolution reactions in alkaline media. β-Ni(OH)2 shows an overpotential of 498 mV to reach 10 mA cm-2 towards oxygen evolution, with a Tafel slope of 149 mV dec-1 (decreasing to 99 mV dec-1 at 75 °C), along with superior stability as evidenced by chronoamperometric measurements. Similarly, a low overpotential of -333 mV to reach 10 mA cm-2 (decreasing to only -65 mV at 75 °C) toward hydrogen evolution with a Tafel slope of -230 mV dec-1 is observed. Finally, β-Ni(OH)2 exhibits a noteworthy performance for the ORR, as evidenced by a low Tafel slope of -78 mV dec-1 and a number of exchanged electrons of 4.01 (indicating direct 4e--oxygen reduction), whereas there are only a few previous reports on modest ORR activity of pure Ni(OH)2.

Surface and Interface Engineering: Molybdenum Carbide-Based Nanomaterials for Electrochemical Energy Conversion

Molybdenum carbide (Mo_x C)-based nanomaterials have shown competitive performances for energy conversion applications based on their unique physicochemical properties. A large surface area and proper surface atomic configuration are essential to explore potentiality of Mo_x C in electrochemical applications. Although considerable efforts are made on the development of advanced Mo_x C-based catalysts for energy conversion with high efficiency and stability, some urgent issues, such as low electronic conductivity, low catalytic efficiency, and structural instability, have to be resolved in accordance with their application environments. Surface and interface engineering have shown bright prospects to construct highly efficient Mo_x C-based electrocatalysts for energy conversion including the hydrogen evolution reaction, oxygen evolution reaction, nitrogen reduction reaction, and carbon dioxide reduction reaction. In this Review, the recent progresses in terms of surface and interface engineering of Mo_x C-based electrocatalytic materials are summarized, including the increased number of active sites by decreasing the particle size or introducing porous or hierarchical structures and surface modification by introducing heteroatom(s), defects, carbon materials, and others electronic conductive species. Finally, the challenges and prospects for energy conversion on Mo_x C-based nanomaterials are discussed in terms of key performance parameters for the catalytic performance.

Carbon Anode in Carbon History

This study examines how the several major industries, associated with a carbon artifact production, essentially belong to one, closely knit family. The common parents are the geological fossils called petroleum and coal. The study also reviews the major developments in carbon nanotechnology and electrocatalysis over the last 30 years or so. In this context, the development of various carbon materials with size, dopants, shape, and structure designed to achieve high catalytic electroactivity is reported, and among them recent carbon electrodes with many important features are presented together with their relevant applications in chemical technology, neurochemical monitoring, electrode kinetics, direct carbon fuel cells, lithium ion batteries, electrochemical capacitors, and supercapattery.

Sequeira CA, Figueiredo JL, Šljukić B. Carbon-Supported Mo2C for Oxygen Reduction Reaction Electrocatalysis

Molybdenum carbide (Mo2C)-based electrocatalysts were prepared using two different carbon supports, commercial carbon nanotubes (CNTs) and synthesised carbon xerogel (CXG), to be studied from the point of view of both capacitive and electrocatalytic properties. Cation type (K+ or Na+) in the alkaline electrolyte solution did not affect the rate of formation of the electrical double layer at a low scan rate of 10 mV s-1. Conversely, the different mobility of these cations through the electrolyte was found to be crucial for the rate of double-layer formation at higher scan rates. Molybdenum carbide supported on carbon xerogel (Mo2C/CXG) showed ca. 3 times higher double-layer capacity amounting to 75 mF cm-2 compared to molybdenum carbide supported on carbon nanotubes (Mo2C/CNT) with a value of 23 mF cm-2 due to having more than double the surface area size. The electrocatalytic properties of carbon-supported molybdenum carbides for the oxygen reduction reaction in alkaline media were evaluated using linear scan voltammetry with a rotating disk electrode. The studied materials demonstrated good electrocatalytic performance with Mo2C/CXG delivering higher current densities at more positive onset and half-wave potential. The number of electrons exchanged during oxygen reduction reaction (ORR) was calculated to be 3, suggesting a combination of four- and two-electron mechanism.

Carbon Nanotube-Supported MoSe2 Holey Flake:Mo2C Ball Hybrids for Bifunctional pH-Universal Water Splitting

The design of cost-effective and efficient electrocatalysts for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is pivotal for the molecular hydrogen (H₂) production from electrochemical water splitting as a future energy source. Herein, we show that the hybridization between multiple HER- and OER-active components is effective for the design and realization of bifunctional electrocatalysts for universal water splitting, i.e., in both acidic and alkaline media. Our strategy relies on the production and characterization of MoSe₂ holey flake:Mo₂C ball hybrids supported by single-walled carbon nanotube (SWCNT) electrocatalysts. Flakes of MoSe₂ are produced through hydrogen peroxide (H₂O₂)-aided liquid phase exfoliation (LPE), which promotes both the exfoliation of the materials and the formation of nanopores in the flakes via chemical etching. The amount of H₂O₂ in the solvent used for the exfoliation process is optimized to obtain ideal high ratio between edge and basal sites ratio, i.e., high-number of electrocatalytic sites. The hybridization of MoSe₂ flakes with commercial ball-like shaped Mo₂C crystals facilitates the Volmer reaction, which works in both acidic and alkaline media. In addition, the electrochemical coupling between SWCNTs (as support) and MoSe₂:Mo₂C hybrids synergistically enhances both HER- and OER-activity of the native components, reaching high η₁₀ in acidic and alkaline media (0.049 and 0.089 V for HER in 0.5 M H₂SO₄ and 1 M KOH, respectively; 0.197 and 0.241 V for OER in 0.5 M H₂SO₄ and 1 M KOH, respectively). The exploitation of the synergistic effects occurring between multicomponent electrocatalysts, coupled with the production of the electrocatalysts themselves through scalable and cost-effective solution-processed manufacturing techniques, is promising to scale-up the production of H₂ via efficient water splitting for the future energy portfolio.

Structural Design and Electronic Modulation of Transition-Metal-Carbide Electrocatalysts toward Efficient Hydrogen Evolution

As the key of hydrogen economy, electrocatalytic hydrogen evolution reactions (HERs) depend on the availability of cost-efficient electrocatalysts. Over the past years, there is a rapid rise in noble-metal-free electrocatalysts. Among them, transition metal carbides (TMCs) are highlighted due to their structural and electronic merits, e.g., high conductivity, metallic band states, tunable surface/bulk architectures, etc. Herein, representative efforts and progress made on TMCs are comprehensively reviewed, focusing on the noble-metal-like electronic configuration and the relevant structural/electronic modulation. Briefly, specific nanostructures and carbon-based hybrids are introduced to increase active-site abundance and to promote mass transportation, and heteroatom doping and heterointerface engineering are encouraged to optimize the chemical configurations of active sites toward intrinsically boosted HER kinetics. Finally, a perspective on the future development of TMC electrocatalysts is offered. The overall aim is to shed some light on the exploration of emerging materials in energy chemistry.

Strongly Coupled Molybdenum Carbide on Carbon Sheets as a Bifunctional Electrocatalyst for Overall Water Splitting

High-performance and affordable electrocatalysts from earth-abundant elements are desirably pursued for water splitting involving hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Here, a bifunctional electrocatalyst of highly crystalline Mo₂ C nanoparticles supported on carbon sheets (Mo₂ C/CS) was designed toward overall water splitting. Owing to the highly active catalytic nature of Mo₂ C nanoparticles, the high surface area of carbon sheets and efficient charge transfer in the strongly coupled composite, the designed catalysts show excellent bifunctional behavior with an onset potential of -60 mV for HER and an overpotential of 320 mV to achieve a current density of 10 mA cm^-2 for OER in 1 m KOH while maintaining robust stability. Moreover, the electrolysis cell using the catalyst only requires a low cell voltage of 1.73 V to achieve a current density of 10 mA cm^-2 and maintains the activity for more than 100 h when employing the Mo₂ C/CS catalyst as both anode and cathode electrodes. Such high performance makes Mo₂ C/CS a promising electrocatalyst for practical hydrogen production from water splitting.

Non-Noble Metal-based Carbon Composites in Hydrogen Evolution Reaction: Fundamentals to Applications

Hydrogen has been hailed as a clean and sustainable alternative to finite fossil fuels in many energy systems. Water splitting is an important method for hydrogen production in high purity and large quantities. To accelerate the hydrogen evolution reaction (HER) rate, it is highly necessary to develop high efficiency catalysts and to select a proper electrolyte. Herein, the performances of non-noble metal-based carbon composites under various pH values (acid, alkaline and neutral media) for HER in terms of catalyst synthesis, structure and molecular design are systematically discussed. A detailed analysis of the structure-activity-pH correlations in the HER process gives an insight on the origin of the pH-dependence for HER, and provide guidance for future HER mechanism studies on non-noble metal-based carbon composites. Furthermore, this Review gives a fresh impetus to rational design of high-performance noble-metal-free composites catalysts and guide researchers to employ the established electrocatalysts in proper water electrolysis technologies.

Tuning the hydrogen evolution activity of β-Mo2C nanoparticles via control of their growth conditions

The use of water electrocatalysis for hydrogen production is a promising, sustainable and greenhouse-gas-free process to develop disruptive renewable energy technologies. Transition metal carbides, in particular β-phase Mo₂C, are garnering increased attention as hydrogen evolution reaction (HER) catalysts due to their favourable synthesis conditions, stability and high catalytic efficiency. We use a thermodynamic approach in conjunction with density functional theory and a kinetic model of exchange current density to systematically study the HER activity of β-Mo₂C under different experimental conditions. We show that the (011) surface has the highest HER activity, which is rationalized by its lack of strong Mo-based hydrogen adsorption sites. Thus, the HER efficiency of β-Mo₂C can be tuned using nanoparticles (NPs) that expose larger fractions of this termination. We give definite maps between NP morphologies and experimental synthesis conditions, and show that the control of the carbon chemical potential during synthesis can expose up to 90% of the (011) surface, while ambient H₂ has little effect on the NP morphology. The "volcano" plot shows that under these optimum conditions, the NP exchange current density is ∼10^-5 A cm^-2, that is only slightly smaller than that of Pt (111).

Core-Shell-Structured Tungsten Carbide Encapsulated within Nitrogen-Doped Carbon Spheres for Enhanced Hydrogen Evolution

It is highly desirable and remains a great challenge to develop alternative hydrogen evolution reaction (HER) electrocatalysts that are low-cost, highly efficient, and exhibit excellent stability. In this work, we report the synthesis of tungsten carbide nanocrystallites encapsulated within nitrogen-doped carbon (TCNC) spheres through in situ polymerization of dopamine with metatungstate followed by carburization under an inert atmosphere. During the in situ and confined carburization process, very small tungsten carbide nanocrystallites are obtained and uniformly dispersed in the simultaneously generated carbon matrix. Benefited from the unique structure and morphology, the resultant TCNC spheres exhibit high electrocatalytic activity and excellent stability toward HER in both acidic and alkaline solutions.