Rational Design of Ag-Based Catalysts for the Electrochemical CO2 Reduction to CO: A Review

Rational regulation of oxygen vacancies in high-entropy oxides to balance FeOx and FexCy phases for catalytic CO2 hydrogenation to light olefins

Adjusting surface oxygen vacancies (Ov) is crucial for oxide catalysts. Doping spinel ZnFe2O4 with elements of different valence states or atomic radio to obtain high-entropy oxides (HEOs) is a common method for creating Ov. Indeed, the formation of single-phase HEOs and the existence of lattice distortion were confirmed by X-ray diffraction and in-situ Raman, and the concentration of Ov in HEOs (Ov = 0.40-0.55) was higher compared to those of binary oxides (Ov = 0.21) by X-ray photoelectron spectroscopy of oxygen and oxygen temperature programmed desorption. Furthermore, analysis based on X-ray photoelectron spectroscopy of iron showed that the carburization ability of Fe atoms in HEOs with different Ov concentrations during the hydrogenation process exhibited significant differences. Finally, density functional theory further confirmed that an appropriate Ov concentration could promote CO2 adsorption and activation, inducing a balance between iron oxide (FeOx) and iron carbide (FexCy) during the reaction process, thereby enabling efficient synthesis of olefins through CO2 hydrogenation. The ZnFeCuZrMnO4 catalyst with the optimal Ov concentration achieved a CO2 conversion rate of 38.9 % and C2-4 olefins (C2=-C4=) selectivity of 40.7 %, outperforming the ZnFe2O4 catalyst. This work provides a design strategy for high-entropy catalysts and serves as guidance for the rational design of spinel oxide-based catalysts with different Ov densities.

A Phenazine-Based Two-Dimensional Covalent Organic Framework for Photochemical CO2 Reduction with Increased Selectivity for Two-Carbon Products

The reduction of carbon dioxide (CO₂) into valuable products will contribute to sustainable carbon use. Here we report the photocatalytic reduction of CO₂ to carbon monoxide, formate, and oxalate ions using a redox-active phenazine-based 2D covalent organic framework (Phen-COF) and its phenazine monomer. Under similar irradiation conditions, Phen-COF produced 2.9 times more CO, 11 times more formate, and 13 times more oxalate compared to equimolar amounts of the monomeric phenazine, demonstrating that the COF architecture enhances catalytic performance (TOFCOF: 10-7 s-1 CO, 10-8 s-1 formate, and 10-11 s-1 oxalate). Structural analysis, including X-ray diffraction and N₂ porosimetry, confirmed the COF's long-range order and porosity. Mechanistic studies suggest a sequential formate-to-oxalate pathway, with CO and formate acting as intermediates. These results demonstrate the potential of the COF architecture to improve the performance of metal-free, redox-active aromatic systems such as phenazines to facilitate efficient and selective CO₂ conversion under mild conditions.

In situ construction of a built-in electric field for efficient CO2 electroreduction

Studying the structural evolution process of Cu-based heterogeneous catalysts is of great significance for converting CO2 into valuable chemicals. In this study, we suggest an efficient synthesis method for Cu-based catalysts that facilitate the formation of heterojunctions with In2O3, providing a mild and effective route for CO2 and H2O reduction. The resulting syngas ratios (CO/H2) are maintained within a narrow range of 0.6 to 1.5 across a broad potential window. Experiments and theoretical calculations demonstrate that the in situ reconstructed internal electric field significantly lowers the energy barrier for CO2 reduction, favoring the formation of *CO intermediates while concurrently suppressing the hydrogen evolution reaction (HER) during the electrochemical CO2 reduction process.

Efficient Electrochemical CO2 Conversion to CO via Cu-Doped Induced Lattice Compression in Ag Nanosheets

Lattice strain is widely recognized as an effective strategy for tuning transition metal catalytic activity, yet its direct impact on electrochemical CO₂ reduction (ECO₂RR) remains not fully understood. In this work, a strategy of Cu-doped Ag is employed to construct a series of AgCu nanosheet structures (NS) with varying lattice compression rates (from -1.90% to -2.75%). Density Functional Theory (DFT) calculations, along with in situ infrared spectroscopic analysis, demonstrate that Cu incorporation efficiently modulates the electronic structure of Ag, promoting enhanced charge transfer. Especially, the changed lattice compression rates can alter the charge density at adsorption sites, thereby ameliorating the surface coverage of CO and adsorption energy of the reaction intermediates (*COOH and *CO). As a result, the AgCu5% catalyst exhibits a maximum Faradaic efficiency (FE) of 95.5% for CO production in an H-cell and 98% in a flow cell at -0.8 VRHE, respectively. Simultaneously, the AgCu5% catalyst achieves FECO of above 86% in the ultrawide current range of 33-215 mA cm-2. The work affords an effective way to use a strain compression strategy to improve the CO2 reduction performance.

Challenges and Opportunities of Choosing a Membrane for Electrochemical CO2 Reduction

The urgent need to reduce greenhouse gas emissions, particularly carbon dioxide (CO2), has led to intensive research into novel techniques for synthesizing valuable chemicals that address climate change. One technique that is becoming increasingly important is the electrochemical reduction of CO2 to produce carbon monoxide (CO), an important feedstock for various industrial processes. This comprehensive review examines the latest developments in CO2 electroreduction, focusing on mechanisms, catalysts, reaction pathways, and optimization strategies to enhance CO production efficiency. A particular emphasis is placed on the role of ion exchange membranes, including cation exchange membranes (CEMs), anion exchange membranes (AEMs), and bipolar membranes (BPMs). The review explores their advantages, disadvantages, and the current challenges associated with their implementation in CO2 electroreduction systems. Through careful analysis of the current literature, this report aims to provide a comprehensive understanding of state-of-the-art methods and their potential impact on sustainable CO production, with a special focus on membrane technologies.

Synthesis of Benzoic Acids from Electrochemically Reduced CO2 Using Heterogeneous Catalysts

A method for the synthesis of benzoic acids from aryl iodides using two of the most abundant and sustainable feedstocks, carbon dioxide (CO2) and water, is disclosed. Central to this method is an effective and selective electrochemical reduction of CO2 (eCO2RR) to CO, which mitigates unwanted dehalogenation reactions occurring when H2 is produced via the hydrogen evolution reaction (HER). In a 3-compartment set-up, CO2 was reduced to CO electrochemically by using a surface-modified silver electrode in aqueous electrolyte. The ex-situ generated CO further underwent hydroxycarbonylation of aryl iodides by MOF-supported palladium catalyst in excellent yields at room temperature. The method avoids the direct handling of hazardous CO gas and gives a wide range of benzoic acid derivatives. Both components of the tandem system can be recycled for several consecutive runs while keeping a high catalytic activity.

Boron-Doping Engineering in AgCd Bimetallic Catalyst Enabling Efficient CO2 Electroreduction to CO and Aqueous Zn-CO2 Batteries

The limited adsorption and activation of CO2 on catalyst and the high energy barrier for intermediate formation hinder the development of electrochemical CO2 reduction reactions (CO2RR). Herein, this work reports a boron (B) doping engineering in AgCd bimetals to alleviate the above limitations for efficient CO2 electroreduction to CO and aqueous Zn-CO2 batteries. Specifically, the B-doped AgCd bimetallic catalyst (AgCd-B) is prepared via a simple reduction reaction at room temperature. A combination of in situ experiments and density functional theory (DFT) calculations demonstrates that B-doping simultaneously enhances the adsorption and activation of CO2 and reduces the binding energy of the intermediates by moderating the electronic structure of bimetals. As a result, the AgCd-B catalyst exhibits a high CO Faraday efficiency (FECO) of 99% at -0.8 V versus reversible hydrogen electrode (RHE). Additionally, it maintains a FECO over 92% at a wide potential window of 600 mV (-0.6 to -1.1 V versus RHE). Furthermore, the AgCd-B catalyst coupled with the Zn anode to assemble aqueous Zn-CO2 batteries shows a power density of 20.18 mW cm-2 and a recharge time of 33 h.

Electrochemical CO2 Reduction Reaction: Comprehensive Strategic Approaches to Catalyst Design for Selective Liquid Products Formation

The escalating concern regarding the release of CO2 into the atmosphere poses a significant threat to the contemporary efforts in mitigating climate change. Amidst a multitude of strategies for curtailing CO2 emissions, the electrochemical CO2 reduction presents a promising avenue for transforming CO2 molecules into a diverse array of valuable gaseous and liquid products, such as CO, CH3OH, CH4, HCO2H, C2H4, C2H5OH, CH3CO2H, 1-C3H7OH and others. The mechanistic investigations of gaseous products (e. g. CO, CH4, C2H4, C2H6 and others) broadly covered in the literature. There is a noticeable gap in the literature when it comes to a comprehensive summary exclusively dedicated to coherent roadmap for the designing principles for a selective catalyst all possible liquid products (such as CH3OH, C2H5OH, 1-C3H7OH, 2-C3H7OH, 1-C4H9OH, as well as other C3-C4 products like methylglyoxal and 2,3-furandiol, in addition to HCO2H, AcOH, oxalic acid and others), selectively converted by CO2 reduction. This entails a meticulous analysis to justify these approaches and a thorough exploration of the correlation between materials and their electrocatalytic properties. Furthermore, these insightful discussions illuminate the future prospects for practical applications, a facet not exhaustively examined in prior reviews.

Perovskite for Electrocatalytic Oxygen Evolution at Elevated Temperatures

The development of advanced electrolysis technologies such as anion exchange membrane water electrolyzer (AEMWE) is central to the vision of a sustainable energy future. Key to the realization of such AEMWE technology lies in the exploration of low-cost and high-efficient catalysts for facilitating the anodic oxygen evolution reaction (OER). Despite tremendous efforts in the fundamental research, most of today's OER works are conducted under room temperature, which deviates significantly with AEMWE's operating temperature (50-80 °C). To bridge this gap, it is highly desirable to obtain insights into the OER catalytic behavior at elevated temperatures. Herein, using the well-known perovskite catalyst Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF) as a proof of concept, the effect of temperature on the variation in OER catalytic activity and stability is evaluated. It is found that the BSCF's activity increases with increasing temperature due to enhanced lattice oxygen participation promoting the lattice oxygen-mediated OER process. Further, surface amorphization and cation leaching of BSCF become more pronounced as temperature increases, causing a somewhat attenuated OER stability. These new understandings of the fundamental OER catalysis over perovskite materials at industrial-relevant temperature conditions are expected to have strong implications for the research of OER catalysts to be deployed in practical water electrolyzers.

Advancements and prospects of perovskite-based fuel electrodes in solid oxide cells for CO2 electrolysis to CO

Carbon dioxide (CO2) electrolysis to carbon monoxide (CO) is a very promising strategy for economically converting CO2, with high-temperature solid oxide electrolysis cells (SOECs) being regarded as the most suitable technology due to their high electrode reaction kinetics and nearly 100% faradaic efficiency, while their practical application is highly dependent on the performance of their fuel electrode (cathode), which significantly determines the cell activity, selectivity, and durability. In this review, we provide a timely overview of the recent progress in the understanding and development of fuel electrodes, predominantly based on perovskite oxides, for CO2 electrochemical reduction to CO (CO2RR) in SOECs. Initially, the current understanding of the reaction mechanisms over the perovskite electrocatalyst for CO synthesis from CO2 electrolysis in SOECs is provided. Subsequently, the recent experimental advances in fuel electrodes are summarized, with importance placed on perovskite oxides and their modification, including bulk doping with multiple elements to introduce high entropy effects, various methods for realizing surface nanoparticles or even single atom catalyst modification, and nanocompositing. Additionally, the recent progress in numerical modeling-assisted fast screening of perovskite electrocatalysts for high-temperature CO2RR is summarized, and the advanced characterization techniques for an in-depth understanding of the related fundamentals for the CO2RR over perovskite oxides are also reviewed. The recent pro-industrial application trials of the CO2RR in SOECs are also briefly discussed. Finally, the future prospects and challenges of SOEC cathodes for the CO2RR are suggested.

Computational screening of defective BC3-supported single-atom catalysts for electrochemical CO2 reduction

The electrochemical CO2 reduction reaction (eCO2RR) driven by renewable electricity offers a green and sustainable technology for synthesizing chemicals and managing global carbon balance. However, developing electrocatalysts with high activity and selectivity for producing C1 products (CO, HCOOH, CH3OH, and CH4) remains a daunting task. In this study, we conducted comprehensive first-principles calculations to investigate the eCO2RR mechanism using B-defective BC3-supported transition metal single-atom catalysts (TM@BC3 SACs). Initially, we evaluated the thermodynamic and electrochemical stability of the designed 26 TM@BC3 SACs by calculating the binding energy and dissolution potential of the anchored TM atoms. Subsequently, the selectivity of the eCO2RR and hydrogen evolution reaction (HER) on stable SACs was determined by comparing the free energy change (ΔG) for the first protonation of CO2 with the ΔG of *H formation. The stability and selectivity screening processes enabled us to narrow down the pool of SACs to the 14 promising ones. Finally, volcano plots for the eCO2RR towards different C1 products were established by using the adsorption energy descriptors of key intermediates, and three SACs were predicted to exhibit high activity and selectivity. The limiting potentials (UL) for HCOOH production on Pd@BC3 and Ag@BC3 are -0.11 V and -0.14 V. CH4 is a preferred product on Re@BC3 with UL of -0.22 V. Elaborate electronic structure calculations elucidate that the activity and selectivity originate from the sufficient activation of the C-O bond and the strong orbital hybridization between crucial intermediates and metal atoms. The proposed catalyst screening criteria, constructed volcano plots and predicted SACs may provide a theoretical foundation for the development of computationally guided catalyst designs for electrochemical CO2 conversion to C1 products.

Theoretical study of transition metal-doped β12 borophene as a new single-atom catalyst for carbon dioxide electroreduction

The electrocatalytic carbon dioxide reduction reaction (CO2RR) presents a viable and cost-effective approach for the elimination of CO2 by transforming it into valuable products. Nevertheless, this process is impeded by the absence of exceptionally active and stable catalysts. Herein, a new type of electrocatalyst of transition metal (TM)-doped β12-borophene (TM@β12-BM) is investigated via density functional theory (DFT) calculations. Through comprehensive screening, two promising single-atom catalysts (SACs), Sc@β12-BM and Y@β12-BM, are successfully identified, exhibiting high stability, catalytic activity and selectivity for the CO2RR. The C1 products methane (CH4) and methanol (CH3OH) are synthesized with limiting potentials (UL) of -0.78 V and -0.56 V on Sc@β12-BM and Y@β12-BM, respectively. Meanwhile, CO2 is more favourable for reduction into the C2 product ethanol (CH3CH2OH) compared to ethylene (C2H4) via C-C coupling on these two SACs. More importantly, the dynamic barriers of the key C-C coupling step are 0.53 eV and 0.73 eV for the "slow-growth" sampling approach in the explicit water molecule model. Furthermore, Sc@β12-BM and Y@β12-BM exhibit higher selectivity for producing C1 compounds (CH4 and CH3OH) than C2 (CH3CH2OH) in the CO2RR. Compared with Sc@β12-BM, Y@β12-BM demonstrates superior inhibition of the competitive hydrogen evolution reaction (HER) in the liquid phase. These results not only demonstrate the great potential of SACs for direct reduction of CO2 to C1 and C2, but also help in rationally designing high-performance SACs.

Recent Progress on Perovskite-Based Electrocatalysts for Efficient CO2 Reduction

An efficient carbon dioxide reduction reaction (CO2RR), which reduces CO2 to low-carbon fuels and high-value chemicals, is a promising approach for realizing the goal of carbon neutrality, for which effective but low-cost catalysts are critically important. Recently, many inorganic perovskite-based materials with tunable chemical compositions have been applied in the electrochemical CO2RR, which exhibited advanced catalytic performance. Therefore, a timely review of this progress, which has not been reported to date, is imperative. Herein, the physicochemical characteristics, fabrication methods and applications of inorganic perovskites and their derivatives in electrochemical CO2RR are systematically reviewed, with emphasis on the structural evolution and product selectivity of these electrocatalysts. What is more, the current challenges and future directions of perovskite-based materials regarding efficient CO2RR are proposed, to shed light on the further development of this prospective research area.

Electrochemical splitting of methane in melts: Producing and tuning high-value carbon materials with controllable morphology

Catalytic decomposition of methane offers a viable solution for producing pure hydrogen and nanocarbon without emitting carbon dioxide. However, conventional thermal catalytic processes and catalysts have limitations in terms of poor carbon quality and catalyst deactivation due to carbon deposition. The newly developed electrochemical splitting of methane (ESM) in molten salt has emerged as a promising alternative that allows for the separate production of hydrogen at the anode and carbon deposition at the cathode. In this study, hydrogen produced via ESM while generating nanocarbon with diverse structures through manipulations of the cathode material and kinetics. Carbon nanotubes grown on Ni cathode, possessing high specific surface area and abundant functional groups, displayed excellent adsorptive capacity for dye adsorption. The open hollow nanocarbon grown on the Ag cathode displayed good capacitance performance. ESM technology has immense potential to enhance the utilization value of carbon by-products and the commercial production of green hydrogen.

Sub-100 mA/cm2 CO2-to-CO Reduction Current Densities in Hierarchical Porous Gold Electrocatalysts Made by Direct Ink Writing and Dealloying

While most research efforts on CO₂-to-CO reduction electrocatalysts focus on boosting their selectivity, the reduction rate, directly proportional to the reduction current density, is another critical parameter to be considered in practical applications. This is because mass transport associated with the diffusion of reactant/product species becomes a major concern at a high reduction rate. Nanostructured Au is a promising CO₂-to-CO reduction electrocatalyst for its very high selectivity. However, the CO₂-to-CO reduction current density commonly achieved in conventional nanostructured Au electrocatalysts is relatively low (in the range of 1-10 mA/cm²) for practical applications. In this work, we combine direct ink writing-based additive manufacturing and dealloying to design a robust hierarchical porous Au electrocatalyst to improve the mass transport and achieve high CO₂-to-CO reduction current densities on the order of 64.9 mA/cm² with CO partial current density of 33.8 mA/cm² at 0.55 V overpotential using an H-cell configuration. Although the current density achieved in our robust hierarchical porous Au electrocatalyst is one order of magnitude higher than the one achieved in conventional nanostructured electrocatalysts, we found that the selectivity of our system is relatively low, namely 52%, which suggests that mass transport remains a critical issue despite the hierarchical porous architecture. We further show that the bulk dimension of our electrocatalyst is a critical parameter governing the interplay between selectivity and reduction rate. The insights gained in this work shed new light on the design of electrocatalysts toward scale-up CO₂ reduction and beyond.

Single-Atom Catalysts in Environmental Engineering: Progress, Outlook and Challenges

Recently, single-atom catalysts (SACs) have attracted wide attention in the field of environmental engineering. Compared with their nanoparticle counterparts, SACs possess high atomic efficiency, unique catalytic activity, and selectivity. This review summarizes recent studies on the environmental remediation applications of SACs in (1) gaseous: volatile organic compounds (VOCs) treatment, NO_x reduction, CO₂ reduction, and CO oxidation; (2) aqueous: Fenton-like advanced oxidation processes (AOPs), hydrodehalogenation, and nitrate/nitrite reduction. We present the treatment activities and reaction mechanisms of various SACs and propose challenges and future opportunities. We believe that this review will provide constructive inspiration and direction for future SAC research in environmental engineering.

The Facet Dependence of CO2 Electroreduction Selectivity on a Pd3Au Bimetallic Catalyst: A DFT Study

The electrochemical carbon dioxide reduction reaction (CO2RR) has emerged as a promising approach to addressing global energy and environmental challenges. Alloys are of particular importance in these applications due to their unique chemical and physical properties. In this study, the possible mechanism of the C1 products from the electrochemical reduction of CO2 on four different surfaces of Pd3Au alloy bimetallic catalysts is predicted using the density functional theory. The differences in the number of d-band electrons and the charge distribution and morphology of the different surfaces result in differing catalytic activity and selectivity on the same surface. On different surfaces, Pd3Au alloy bimetallic catalysts have different potential limiting steps in CO2RR, resulting in differing selectivity. The Pd3Au (100) surface has a good selectivity for HER, indicating that the increase in the net charge on the surface of the alloy improves the selectivity for HER. The Pd3Au (211) surface, with a step structure, shows a good selectivity for methanol production from CO2RR. In addition, an electronic structure analysis shows that the selectivity of the reactions involved in the conversion of adsorbates is determined by the difference between the center of the d-band on the top of the catalyst, where the reactant and the product are located. The results of this study may provide some theoretical basis for designing and developing more efficient and selective CO2 reduction catalysts.

Achieving Tunable Selectivity and Activity of CO2 Electroreduction to CO via Bimetallic Silver-Copper Electronic Engineering

Limited comprehension of the reaction mechanism has hindered the development of catalysts for CO₂ reduction reactions (CO₂ RR). Here, the bimetallic AgCu nanocatalyst platform is employed to understand the effect of the electronic structure of catalysts on the selectivity and activity for CO₂ electroreduction to CO. The atomic arrangement and electronic state structure vary with the atomic ratio of Ag and Cu, enabling tunable d-band centers to optimize the binding strength of key intermediates. Density functional theory calculations confirm that the variation of Cu content greatly affects the free energy of *COOH, *CO (intermediate of CO), and *H (intermediates of H₂ ), which leads to the change of the rate-determining step. Specifically, Ag₉₆ Cu₄ reduces the free energy of the formation of *COOH while maintaining a relatively high theoretical overpotential for hydrogen evolution reaction(HER), thus achieving the best CO selectivity. While Ag₇₀ Cu₃₀ shows relatively low formation energy of both *COOH and *H, the compromised thermodynamic barrier and product selectivity allows Ag₇₀ Cu₃₀ the best CO partial current density. This study realizes the regulation of the selectivity and activity of electrocatalytic CO₂ to CO, which provides a promising way to improve the intrinsic performance of CO₂ RR on bimetallic AgCu.

Effective perspiration is essential to uphold the stability of zero-gap MEA-based cathodes used in CO2 electrolysers

The application of gas diffusion electrodes (GDEs) for the electrochemical reduction of CO2 to value-added products creates the possibility of achieving current densities of a few hundred mA cm-2. To achieve stable operation at such high reaction rates remains, however, a challenging task, due to the flooding of the GDE. In order to mitigate flooding in a zero-gap membrane-electrode assembly (MEA) configuration, paths for effective electrolyte perspiration inside the GDE structure have to be kept open during the electrolysis process. Here we demonstrate that apart from the operational parameters of the electrolysis and the structural properties of the supporting gas diffusion layers, also the chemical composition of the applied catalyst inks can play a decisive role in the electrolyte management of GDEs used for CO2 electroreduction. In particular, the presence of excess amounts of polymeric capping agents (used to stabilize the catalyst nanoparticles) can lead to a blockage of micropores, which hinders perspiration and initiates the flooding of the microporous layer. Here we use a novel ICP-MS analysis-based approach to quantitatively monitor the amount of perspired electrolyte that exits a GDE-based CO2 electrolyser, and we show a direct correlation between the break-down of effective perspiration and the appearance of flooding-the latter ultimately leading to a loss of electrolyser stability. We recommend the use of an ultracentrifugation-based approach by which catalyst inks containing no excess amount of polymeric capping agents can be formulated. Using these inks, the stability of electrolyses can be ensured for much longer times.

Atomically Dispersed Cu Catalysts on Sulfide-Derived Defective Ag Nanowires for Electrochemical CO2 Reduction

Single-atom catalysts (SACs) have shown potential for achieving an efficient electrochemical CO₂ reduction reaction (CO2RR) despite challenges in their synthesis. Here, Ag₂S/Ag nanowires provide initial anchoring sites for Cu SACs (Cu/Ag₂S/Ag), then Cu/Ag(S) was synthesized by an electrochemical treatment resulting in complete sulfur removal, i.e., Cu SACs on a defective Ag surface. The CO2RR Faradaic efficiency (FE_CO2RR) of Cu/Ag(S) reaches 93.0% at a CO2RR partial current density (j_CO2RR) of 2.9 mA/cm² under -1.0 V vs RHE, which outperforms sulfur-removed Ag₂S/Ag without Cu SACs (Ag(S), 78.5% FE_CO2RR with 1.8 mA/cm²j_CO2RR). At -1.4 V vs RHE, both FE_CO2RR and j_CO2RR over Cu/Ag(S) reached 78.6% and 6.1 mA/cm², which tripled those over Ag(S), respectively. As revealed by in situ and ex situ characterizations together with theoretical calculations, the interacted Cu SACs and their neighboring defective Ag surface increase microstrain and downshift the d-band center of Cu/Ag(S), thus lowering the energy barrier by ∼0.5 eV for *CO formation, which accounts for the improved CO2RR activity and selectivity toward related products such as CO and C₂₊ products.

Alloying strategies for tuning product selectivity during electrochemical CO2 reduction over Cu

Excessive reliance on fossil fuels has led to the release and accumulation of large quantities of CO₂ into the atmosphere which has raised serious concerns related to environmental pollution and global warming. One way to mitigate this problem is to electrochemically recycle CO₂ to value-added chemicals or fuels using electricity from renewable energy sources. Cu is the only metallic electrocatalyst that has been shown to produce a wide range of industrially important chemicals at appreciable rates. However, low product selectivity is a fundamental issue limiting commercial applications of electrochemical CO₂ reduction over Cu catalysts. Combining copper with other metals that actively contribute to the electrochemical CO₂ reduction reaction process can selectively facilitate generation of desirable products. Alloying Cu can alter surface binding strength through electronic and geometric effects, enhancing the availability of surface confined carbon species, and stabilising key reduction intermediates. As a result, significant research has been undertaken to design and fabricate copper-based alloy catalysts with structures that can enhance the selectivity of targeted products. In this article, progress with use of alloying strategies for development of Cu-alloy catalysts are reviewed. Challenges in achieving high selectivity and possible future directions for development of new copper-based alloy catalysts are considered.

Bulk-immiscible CuAg alloy nanorods prepared by phase transition from oxides for electrochemical CO2 reduction

Combining Cu and Ag in an alloy state holds promise to serve as a tandem catalyst for electrocatalytic CO₂ reduction, but is restricted by immiscibility in the bulk. Here, a far-from-equilibrium method is developed to synthesize CuAg alloy by electroreduction of Cu₂Ag₂O₃ under a large cathodic overpotential. The alloy state of CuAg is conducive to the formation of C₂₊ molecules. A high formation rate of C₂H₄ of 159.8 μmol cm^-2 h^-1 is reached on the CuAg alloy nanorods, 2.3 times higher than that on pure Cu.

Ordered Ag Nanoneedle Arrays with Enhanced Electrocatalytic CO2 Reduction via Structure-Induced Inhibition of Hydrogen Evolution

Silver is an attractive catalyst for converting CO₂ into CO. However, the high CO₂ activation barrier and the hydrogen evolution side reaction seriously limit its practical application and industrial perspective. Here, an ordered Ag nanoneedle array (Ag-NNAs) was prepared by template-assisted vacuum thermal-evaporation for CO₂ electroreduction into CO. The nanoneedle array structure induces a strong local electric field at the tips, which not only reduces the activation barrier for CO₂ electroreduction but also increases the energy barrier for the hydrogen evolution reaction (HER). Moreover, the array structure endows a high surface hydrophobicity, which can regulate the adsorption of water molecules at the interface and thus dynamically inhibit the competitive HER. As a result, the optimal Ag-NNAs exhibits 91.4% Faradaic efficiency (FE) of CO for over 700 min at -1.0 V vs RHE. This work provides a new concept for the application of nanoneedle array structures in electrocatalytic CO₂ reduction reactions.

Scale up of reactors for carbon dioxide reduction

In recent times there has been a great deal of interest in the conversion of carbon dioxide into more useful chemical compounds. On the other hand, the translation of these developments in electrochemical reduction of carbon dioxide from the laboratory bench to practical scale remains an underexplored topic. Here we examine some of the major challenges, demonstrating some promising strategies towards such scale-up, including increased electrode area and stacking of electrode pairs in different configurations. We observed that increasing the electrode area from 1 to 10 cm2 led to only a 4% drop in current density, with similarly small penalties realised when stacking sub-cells together.

Silver-Carbonaceous Microsphere Precursor-Derived Nano-Coral Ag Catalyst for Electrochemical Carbon Dioxide Reduction

The selective and effective conversion of CO2 into available chemicals by electrochemical methods was applied as a promising way to mitigate the environment and energy crisis. Metal silver is regarded as an efficient electrocatalyst that can selectively convert CO2 into CO at room temperature. In this paper, a series of coral-like porous Ag (CD-Ag) catalysts were fabricated by calcining silver-carbonaceous microsphere (Ag/CM) precursors with different Ag content and the formation mechanism of CD-Ag catalysts was proposed involving the Ag precursor reduction and CM oxidation. In the selective electrocatalytic reduction of CO2 to CO, the catalyst 15 CD-Ag showed a stable current density at −6.3 mA/cm2 with a Faraday efficiency (FE) of ca. 90% for CO production over 5 h in −0.95 V vs. RHE. The excellent performance of the 15 CD-Ag catalysts is ascribed to the special surface chemical state and the particular nano-coral porous structure with uniformly distributed Ag particles and pore structure, which can enhance the electrochemical active surface areas (ECSA) and provide more active sites and porosity compared with other CD-Ag catalysts and even Ag foil.

Bimetallic Gold-Silver Nanostructures Drive Low Overpotentials for Electrochemical Carbon Dioxide Reduction

Alloy formation is an advanced approach to improve desired properties that the monoelements cannot achieve. Alloys are usually designed to tailor intrinsic natures or induce synergistic effects by combining materials with distinct properties. Indeed, unprecedented properties have emerged in many cases, superior to a simple sum of pure elements. Here, we present Au-Ag alloy nanostructures with prominent catalytic properties in an electrochemical carbon dioxide reduction reaction (eCO₂RR). The Au-Ag hollow nanocubes are prepared by galvanic replacement of Au on Ag nanocubes. When the Au-to-Ag ratio is 1:1 (Au₁Ag₁), the alloy hollow nanocubes exhibit maximum Faradaic efficiencies of CO production in a wide potential range and high mass activity and CO current density superior to those of the bare metals. In particular, overpotentials are estimated to be similar to or lower than that of the Au catalyst under various standard metrics. Density functional theory calculations, machine learning, and a statistical consideration demonstrate that the optimal configuration of the *COOH intermediate is a bidentate coordination structure where C binds to Au and O binds to Ag. This active Au-Ag neighboring configuration has a maximum population and enhanced intrinsic catalytic activity on the Au₁Ag₁ surface among other Au-to-Ag compositions, in good agreement with the experimental results. Further application of Au₁Ag₁ to a membrane electrode assembly cell at neutral conditions shows enhanced CO Faradaic efficiency and current densities compared to Au or Ag nanocubes, indicating the possible extension of Au-Ag alloys to larger electrochemical systems. These results give a new insight into the synergistic roles of Au and Ag in the eCO₂RR and offer a fresh direction toward a rational design of bimetallic catalysts at a practical scale.

In Situ/Operando Insights into the Stability and Degradation Mechanisms of Heterogeneous Electrocatalysts

The further commercialization of renewable energy conversion and storage technologies requires heterogeneous electrocatalysts that meet the exacting durability target. Studies of the stability and degradation mechanisms of electrocatalysts are expected to provide important breakthroughs in stability issues. Accessible in situ/operando techniques performed under realistic reaction conditions are therefore urgently needed to reveal the nature of active center structures and establish links between the structural motifs in a catalyst and its stability properties. This review highlights recent research advances regarding in situ/operando techniques and improves the understanding of the stabilities of advanced heterogeneous electrocatalysts used in a diverse range of electrochemical reactions; it also proposes some degradation mechanisms. The review concludes by offering suggestions for future research.

Bayesian optimization of electrochemical devices for electrons-to-molecules conversions: the case of pulsed CO2 electroreduction

Bayesian optimization (BO) was implemented to improve a membrane electrode assembly CO2 electroreduction device undergoing pulsed operation.

One Pot-Synthesized Ag/Ag-Doped CeO2 Nanocomposite with Rich and Stable 3D Interfaces and Ce3+ for Efficient Carbon Dioxide Electroreduction

Electrochemical CO₂ reduction (ECR) technology is promising to produce value-added chemicals and alleviate the climate deterioration. Interface engineering is demonstrated to improve the ECR performance for metal and oxide composite catalysts. However, the approach to form a substantial interface is still limited. In this work, we report a facile one-pot coprecipitation method to synthetize novel silver and silver-doped ceria (Ag/CeO₂) nanocomposites. This catalyst provides a rich 3D interface and high Ce³⁺ concentration (33.6%), both of which are beneficial for ECR to CO. As a result, Ag/CeO₂ exhibits a 99% faradaic efficiency and 10.5 A g^-1 mass activity to convert CO₂ into CO at an overpotential of 0.83 V. The strong interfacial interaction between Ag and CeO₂ may enable the presence of surface Ce³⁺ and guarantee the improved durability during the electrolysis. We also develop numerical simulation to understand the local pH effect on the ECR performance and propose that the superior ECR performance of Ag/CeO₂ is mainly due to the accelerated CO formation rate rather than the suppressed hydrogen evolution reaction.

Two-dimensional materials for electrochemical CO2 reduction: materials, in situ/operando characterizations, and perspective

Electrochemical CO₂ reduction (CO₂ ECR) is an efficient approach to achieving eco-friendly energy generation and environmental sustainability. This approach is capable of lowering the CO₂ greenhouse gas concentration in the atmosphere while producing various valuable fuels and products. For catalytic CO₂ ECR, two-dimensional (2D) materials stand as promising catalyst candidates due to their superior electrical conductivity, abundant dangling bonds, and tremendous amounts of surface active sites. On the other hand, the investigations on fundamental reaction mechanisms in CO₂ ECR are highly demanded but usually require advanced in situ and operando multimodal characterizations. This review summarizes recent advances in the development, engineering, and structure-activity relationships of 2D materials for CO₂ ECR. Furthermore, we overview state-of-the-art in situ and operando characterization techniques, which are used to investigate the catalytic reaction mechanisms with the spatial resolution from the micron-scale to the atomic scale, and with the temporal resolution from femtoseconds to seconds. Finally, we conclude this review by outlining challenges and opportunities for future development in this field.

A Reconstructed Cu2 P2 O7 Catalyst for Selective CO2 Electroreduction to Multicarbon Products

The electrochemical CO₂ reduction reaction (CO₂ RR) over Cu-based catalysts shows great potential for converting CO₂ into multicarbon (C₂₊ ) fuels and chemicals. Herein, we introduce an A₂ M₂ O₇ structure into a Cu-based catalyst through a solid-state reaction synthesis method. The Cu₂ P₂ O₇ catalyst is electrochemically reduced to metallic Cu with a significant structure evolution from grain aggregates to highly porous structure under CO₂ RR conditions. The reconstructed Cu₂ P₂ O₇ catalyst achieves a Faradaic efficiency of 73.6 % for C₂₊ products at an applied current density of 350 mA cm^-2 , remarkably higher than the CuO counterparts. The reconstructed Cu₂ P₂ O₇ catalyst has a high electrochemically active surface area, abundant defects, and low-coordinated sites. In situ Raman spectroscopy and density functional theory calculations reveal that CO adsorption with bridge and atop configurations is largely improved on Cu with defects and low-coordinated sites, which decreased the energy barrier of the C-C coupling reaction for C₂₊ products.

A Critical Review on Black Phosphorus-Based Photocatalytic CO2 Reduction Application

Energy shortages and greenhouse effects are two unavoidable problems that need to be solved. Photocatalytically converting CO₂ into a series of valuable chemicals is considered to be an effective means of solving the above dilemmas. Among these photocatalysts, the utilization of black phosphorus for CO₂ photocatalytic reduction deserves a lightspot not only for its excellent catalytic activity through different reaction routes, but also on account of the great preponderance of this relatively cheap catalyst. Herein, this review offers a summary of the recent advances in synthesis, structure, properties, and application for CO₂ photocatalytic reduction. In detail, the review starts from the basic principle of CO₂ photocatalytic reduction. In the following section, the synthesis, structure, and properties, as well as CO₂ photocatalytic reduction process of black phosphorus-based photocatalyst are discussed. In addition, some possible influencing factors and reaction mechanism are also summarized. Finally, a summary and the possible future perspectives of black phosphorus-based photocatalyst for CO₂ reduction are established.

Silver nanomaterials: synthesis and (electro/photo) catalytic applications

In view of their unique characteristics and properties, silver nanomaterials (Ag NMs) have been used not only in the field of nanomedicine but also for diverse advanced catalytic technologies. In this comprehensive review, light is shed on general synthetic approaches encompassing chemical reduction, sonochemical, microwave, and thermal treatment among the preparative methods for the syntheses of Ag-based NMs and their catalytic applications. Additionally, some of the latest innovative approaches such as continuous flow integrated with MW and other benign approaches have been emphasized that ultimately pave the way for sustainability. Moreover, the potential applications of emerging Ag NMs, including sub nanomaterials and single atoms, in the field of liquid-phase catalysis, photocatalysis, and electrocatalysis as well as a positive role of Ag NMs in catalytic reactions are meticulously summarized. The scientific interest in the synthesis and applications of Ag NMs lies in the integrated benefits of their catalytic activity, selectivity, stability, and recovery. Therefore, the rise and journey of Ag NM-based catalysts will inspire a new generation of chemists to tailor and design robust catalysts that can effectively tackle major environmental challenges and help to replace noble metals in advanced catalytic applications. This overview concludes by providing future perspectives on the research into Ag NMs in the arena of electrocatalysis and photocatalysis.

Pyridine Grafted on SnO2 -Loaded Carbon Nanotubes Acting as Cocatalyst for Highly Efficient Electroreduction of CO2

Sn-based electrocatalysts have shown great potential in the future industrial application of CO₂ electroreduction (CO₂ ER) to C₁ products due to their non-toxicity and low price. However, it is a great challenge to fabricate a Sn-based electrocatalytic system with high performance and stability. Herein, grafted pyridine was innovatively coupled with SnO₂ to construct an organic-inorganic composite (SnO₂ /Py-CNTO) for highly efficient CO₂ ER. The detailed studies showed that pyridine and protonated pyridine coexist on the surface of SnO₂ /Py-CNTO, and both play distinctive roles in promoting the selectivity of CO₂ ER. Benefiting from the merits, SnO₂ /Py-CNTO delivered an excellent faradaic efficiency (FE) of 96 % for CO₂ ER at -1.29 V_RHE where the HCOOH production with 85 % FE dominated, and good stability for 32 h electrolysis. The theoretical calculations showed that protonated pyridine not only facilitates the CO₂ adsorption and HCOOH desorption, but also significantly reduces the limiting potential for the conversion of CO₂ to HCOOH.