Transition Metal and Nitrogen Co-Doped Carbon-based Electrocatalysts for the Oxygen Reduction Reaction: From Active Site Insights to the Rational Design of Precursors and Structures

Impact of Metal Source Structure on the Electrocatalytic Properties of Polyacrylonitrile-Derived Co-N-Doped Oxygen Reduction Reaction Catalysts

The oxygen reduction reaction (ORR) plays a central role in energy conversion and storage technologies. A promising alternative to precious metal catalysts are non-precious metal doped carbons. Considerable efforts have been devoted to cobalt-doped carbonized polyacrylonitrile catalysts, but the optimization of their catalytic performance remains a key challenge. We have proposed a multifunctional active metal source strategy based on the cobalt complex with the ligand containing pyridine and azo-fragments. This complex simultaneously provides the nitrogenous environment for the Co atoms and acts as a blowing agent due to N2 extrusion, thus increasing the surface area and porosity of the material. This strategy provided the catalysts with a high surface area and pore volume, combined with the greater fraction of Co-N clusters, and a lesser amount and smaller size of Co metal particles compared to conventionally prepared catalysts, resulting in improved catalytic performance. In addition to strict 4-electron ORR kinetics and 383 mV overpotential, the novel catalysts exhibit limiting current values close to the Pt/C benchmark and greatly overcome the Pt in methanol tolerance. These results demonstrate the critical role of metal source structure and carbonization parameters in tailoring the structural and electrochemical properties of the catalysts.

The promise of chiral electrocatalysis for efficient and sustainable energy conversion and storage: a comprehensive review of the CISS effect and future directions

The integration of chirality, specifically through the chirality-induced spin selectivity (CISS) effect, into electrocatalytic processes represents a pioneering approach for enhancing the efficiency of energy conversion and storage systems. This review delves into the burgeoning field of chiral electrocatalysis, elucidating the fundamental principles, historical development, theoretical underpinnings, and practical applications of the CISS effect across a spectrum of electrocatalytic reactions, including the oxygen evolution reaction (OER), oxygen reduction reaction (ORR), and hydrogen evolution reaction (HER). We explore the methodological advancements in inducing the CISS effect through structural and surface engineering and discuss various techniques for its measurement, from magnetic conductive atomic force microscopy (mc-AFM) to hydrogen peroxide titration. Furthermore, this review highlights the transformative potential of the CISS effect in addressing the key challenges of the NRR and CO2RR processes and in mitigating singlet oxygen formation in metal-air batteries, thereby improving their performance and durability. Through this comprehensive overview, we aim to underscore the significant role of incorporating chirality and spin polarization in advancing electrocatalytic technologies for sustainable energy applications.

Tunable Syngas Formation at Industrially Relevant Current Densities via CO2 Electroreduction and Hydrogen Evolution over Ni and Fe-derived Catalysts obtained via One-Step Pyrolysis of Polybenzoxazine Based Composites

Simultaneous electroreduction of CO2 and H2O to syngas can provide a sustainable feed for established processes used to synthesize carbon-based chemicals. The synthesis of MOx/M-N-Cs (M = Ni, Fe) electrocatalysts reported via one-step pyrolysis that shows increased performance during syngas electrosynthesis at high current densities with adaptable H2/CO ratios, e.g., for the Fischer-Tropsch process. When embedded in gas diffusion electrodes (GDEs) with optimized hydrophobicity, the NiOx/Ni-N-C catalyst produces syngas (H2/CO = 0.67) at -200 mA cm-2 while for the FeOx/Fe-N-C syngas production occurs at ≈-150 mA cm-2. By tuning the electrocatalyst's microenvironment, stable operation for >3 h at -200 mA cm-2 is achieved with the NiOx/Ni-N-C GDE. Post-electrolysis characterization revealed that the restructuring of the catalyst via reduction of NiOx to metallic Ni NPs still enables stable operation of the electrode at -200 mA cm-2, when embedded in an optimized microenvironment. The ionomer and additives used in the catalyst layer are important for the observed stable operation. Operando Raman measurements confirm the presence of NiOx during CO formation and indicate weak adsorption of CO on the catalyst surface.

Advances in Atomically Dispersed Metal and Nitrogen Co-Doped Carbon Catalysts for Advanced Oxidation Technologies and Water Remediation: From Microenvironment Modulation to Non-Radical Mechanisms

Atomically dispersed metal and nitrogen co-doped carbon catalysts (M-N-C) have been attracting tremendous attentions thanks to their unique MNx active sites and fantastic catalytic activities in advanced oxidation technologies (AOTs) for water remediation. However, precisely tailoring the microenvironment of active sites at atomic level is still an intricate challenge so far, and understanding of the non-radical mechanisms in persulfate activation exists many uncertainties. In this review, latest developments on the microenvironment modulation strategies of atomically dispersed M-N-C catalysts including regulation of central metal atoms, regulation of coordination numbers, regulation of coordination heteroatoms, and synergy between single-atom catalysts (SACs) with metal species are systematically highlighted and discussed. Afterwards, progress and underlying limitations about the typical non-radical pathways from production of singlet oxygen, electron transfer mechanism to generation of high-valent metal species are well demonstrated to inspire intrinsic insights about the mechanisms of M-N-C/persulfate systems. Lastly, perspectives for the remaining challenges and opportunities about the further development of carbon-based SACs in environment remediation are also pointed out. It is believed that this review will be much valuable for the further design of active sites in M-N-C/persulfate catalytic systems and promote the wide application of SACs in various fields.

Catalyzing Sustainable Water Splitting with Single Atom Catalysts: Recent Advances

Electrochemical water splitting for sustainable hydrogen and oxygen production have shown enormous potentials. However, this method needs low-cost and highly active catalysts. Traditional nano catalysts, while effective, have limits since their active sites are mostly restricted to the surface and edges, leaving interior surfaces unexposed in redox reactions. Single atom catalysts (SACs), which take advantage of high atom utilization and quantum size effects, have recently become appealing electrocatalysts. Strong interaction between active sites and support in SACs have considerably improved the catalytic efficiency and long-term stability, outperforming their nano-counterparts. This review's first section examines the Hydrogen Evolution Reaction (HER) and the Oxygen Evolution Reaction (OER). In the next section, SACs are categorized as noble metal, non-noble metal, and bimetallic synergistic SACs. In addition, this review emphasizes developing methodologies for effective SAC design, such as mass loading optimization, electrical structure modulation, and the critical role of support materials. Finally, Carbon-based materials and metal oxides are being explored as possible supports for SACs. Importantly, for the first time, this review opens a discussion on waste-derived supports for single atom catalysts used in electrochemical reactions, providing a cost-effective dimension to this vibrant research field. The well-known design techniques discussed here may help in development of electrocatalysts for effective water splitting.

Highly Accessible Co-Nx Active Sites-Doped Carbon Framework with Uniformly Dispersed Cobalt Nanoparticles for the Oxygen Reduction Reaction in Alkaline and Neutral Electrolytes

Porous carbon materials with nitrogen-coordinated transition metal active sites have been widely regarded as appealing alternatives to replace noble metal catalysts in oxygen-based electrochemical reaction activities. However, improving the electrocatalytic activity of transition-metal-based catalysts remains a challenge for widespread application in renewable devices. Herein, we use a simple one-step pyrolysis method to construct a Co nanoparticles/Co-Nx-decorated carbon framework catalyst with a near-total external surface structure and uniform dispersion nanoparticles, which displays promising catalytic activity and superior stability for oxygen reduction reactions in both alkaline and neutral electrolytes, as evidenced by the positive shift of half-wave potential by 44 and 11 mV compared to 20% Pt/C. Excellent electrochemical performance originates from highly accessible Co nanoparticles/Co-Nx active sites at the external surface structure (this is, exposing active sites). The thus-assembled liquid zinc-air battery using the synthesized electrocatalyst as the cathode material delivers a maximum power density of 178 mW cm-2 with an open circuit potential of 1.48 V and long-term discharge stability over 150 h.

Promoting Oxygen Reduction Reaction on Carbon-based Materials by Selective Hydrogen Bonding

Electrochemical oxygen reduction reaction (ORR) is fundamental for many energy conversion and storage devices. Selective tuning of *OOH/*OH adsorption energy to break the intrinsic scaling limitation (ΔG*OOH =ΔG*OH +3.2 eV) is effective in optimizing the ORR limiting potential (UL ), which is practically challenging to achieve by constructing a particular catalyst. Herein, using first-principles calculations, we elucidated how to rationally plant an additional *OH that can selectively interact with the ORR intermediate of *OOH via hydrogen bonding, while not affecting the *OH intermediate. Guided by the design principle, we successfully tailored a series of novel carbon-based catalysts, with merits of low-cost, long-lasting, synthesis feasibility, exhibiting a high UL (1.06 V). Our proposed strategy comes up with a new linear scaling relationship of ΔG*OOH =ΔG*OH +2.84 eV. This approach offers a great possibility for the rational design of efficient catalysts for ORR and other chemical reactions.

Continuous On-Site H2O2 Electrosynthesis via Two-Electron Oxygen Reduction Enabled by an Oxygen-Doped Single-Cobalt Atom Catalyst with Nitrogen Coordination

Single-Co atom catalysts are suggested as an efficient platinum metal group-free catalyst for promoting the oxygen reduction into water or hydrogen peroxide, while the relevance of the catalyst structure and selectivity is still ambiguous. Here, we propose a thermal evaporation method for modulating the chemical environment of single-Co atom catalysts and unveil the effect on the selectivity and activity. It discloses that nitrogen functional groups prefer to proceed the oxygen reduction via a 4e- pathway and notably improve the intrinsic activity, especially when being coordinated with the Co center, while oxygen doping tempts the electron delocalization around cobalt sites and decreases the binding force toward HOO* intermediates, thereby increasing the 2e- selectivity. Consequently, the well-designed oxygen-doped single-Co atom catalysts with nitrogen coordination deliver an impressive 2e- oxygen reduction performance, approaching the onset potential of 0.78 V vs RHE and selectivity of >90%. As an impressive cathode catalyst of an electrochemical flow cell, it generates H2O2 at a rate of 880 mmol gcat-1 h-1 and faradaic efficiency of 95.2%, in combination with an efficient nickel-iron oxygen evolution anode.

Noble-metal-free co-N-C catalyst derived from cellulose-based poly(ionic liquid)s for highly efficient oxygen reduction reaction

Noble-Metal-Free nitrogen-doped carbon-based materials are promising electrocatalysts for oxygen reduction reaction (ORR), yet it remains a great challenge to construct efficient porous non-noble metal nitrogen-doped carbon (M-N-C) catalysts with uniform distribution, due to the easy aggregation of metals. Herein, we reported the synthesis and assessment of a novel and efficient noble-metal-free catalyst for oxygen reduction reaction (ORR) from pyrolysis of a cobalt-containing cellulosic poly(ionic liquid) (Co-N-C). The prepared Co-N-C catalyst possesses high surface area, hierarchical porous structure, well-dispersed Co nanoparticles and large amounts of low-coordinated Co active sites. Especially, the Co-N-C-850 sample exhibits a high ORR activity (E_onset = 0.827 V, E_1/2 = 0.74 V) that can rival 20 wt% commercial Pt/C (E_onset = 0.833 V, E_1/2 = 0.71 V) in alkaline media. Moreover, the Co-N-C-850 sample also shows excellent anti-methanol poisoning activity and long-term stability toward ORR compared with commercial Pt/C. Our study provides a promising avenue both for the development of non-noble M-N-C catalysts for fuel cells and functional utilization of cellulose.

Highly exposed surface pore-edge FeNx sites for enhanced oxygen reduction performance in Zn-air batteries

Atomically dispersed pore-edge FeNx sites anchored on porous carbon exhibit excellent activity and stability towards ORR. The assembled Zn-air battery presents a high peak power density (150 mW cm−2) and long-cycle stability (450 h).

Chirality enhances oxygen reduction

Controlled reduction of oxygen is important for developing clean energy technologies, such as fuel cells, and is vital to the existence of aerobic organisms. The process starts with oxygen in a triplet ground state and ends with products that are all in singlet states. Hence, spin constraints in the oxygen reduction must be considered. Here, we show that the electron transfer efficiency from chiral electrodes to oxygen (oxygen reduction reaction) is enhanced over that from achiral electrodes. We demonstrate lower overpotentials and higher current densities for chiral catalysts versus achiral ones. This finding holds even for electrodes composed of heavy metals with large spin-orbit coupling. The effect results from the spin selectivity conferred on the electron current by the chiral assemblies, the chiral-induced spin selectivity effect.

C2-Symmetric Bissulfoximine Based Metal Complexes: Synthesis, Characterization and their Electrocatalytic activity in Oxygen Reduction Reaction

Sulfoximine-based metal complexes have gained much interest in recent years owing to their promising properties in synthetic organic chemistry. These sulfoximines have been recently introduced in the field of organometallics. However, the coordination properties of pincer sulfoximine ligands and their metal complexes have never been reported. Here in this work a C 2 -symmetric bissulfoximine based pincer ligand ((pyridine-2,6-diylbis(methylene))bis(azaneylylidene))bis(diphenyl-λ 6 -sulfanone) namely S-P ligand and its metal [M(SP) 2 ] 2+ {M = Fe ( SC-1 ), Co ( SC-2 ), Ni ( SC-3 ), Cu ( SC-4 )} complexes were synthesized. The complexes were characterized by different spectroscopic techniques like UV-Vis, IR, NMR, ESI-MS, and single-crystal XRD. Complexes SC-1 and SC-3 exhibited octahedral geometry irrespective of the metal center. The complexes were systematically explored for electrocatalytic oxygen reduction reaction (ORR) by immobilizing them on a glassy carbon electrode using Nafion. These complexes showed selective 2e - catalytic reduction of O 2 to H 2 O 2 in which complex SC-4 showed the highest activity with an onset potential of 0.75 V and complex SC-2 showed the highest selectivity (≈ 90%). This could be viewed as a promising candidate as an electrocatalyst for electrochemical hydrogen peroxide synthesis.

Iron-modulated Ni3S2 derived from a Ni-MOF-based Prussian blue analogue for a highly efficient oxygen evolution reaction

Developing efficient, environmentally friendly and cost-effective non-precious metal electrocatalysts for the oxygen evolution reaction (OER) is essential to alleviate the energy crisis and environmental pollution.