Defect Engineering of Photocatalysts towards Elevated CO2 Reduction Performance

Recent Advances of Indium-Based Sulfides in Photocatalytic CO2 Reduction

Urgent and significant, the mitigation of greenhouse effects and the preservation of the Earth's ecological environment are paramount concerns. Photocatalytic carbon dioxide (CO2) reduction technology holds immense promise as it directly harnesses renewable solar energy to convert CO2 into hydrocarbon fuels and valuable chemical products. Indium (In)-based sulfides have garnered significant attention in the realm of fundamental research on CO2 photocatalytic conversion. The photocatalytic performance exhibited by In-based materials is attributed to the appropriate bandgap (E g), unique electronic states, tunable atomic structure, and superior optoelectronic properties. Notably, In-based metal sulfides also show excellent potential for addressing challenges related to photocorrosion and carrier recombination. This paper highlighted the key structural features and commonly employed synthesis techniques of In-based metal sulfides. Furthermore, it summarized effective modification strategies aimed at optimizing the photocatalytic performance of these materials. A particular focus was placed on exploring the intricate structure-activity relationships, encompassing the influence of heterostructure construction, element doping, defect engineering, and co-catalyst modification on enhancing photocatalytic efficiency. Finally, the article identified the current challenges and outlined the promising future directions for In-based photocatalysts, hoping to provide valuable references for researchers.

Principle Design of C-C Coupling Pathway Towards Highly Selective C2 Products Using Photocatalytic CO2 Reduction:A Review

Photocatalytic conversion of environmental CO2 into valuable fuels is expected to alleviate fossil fuel and pollution problems. However, intricate product-reaction pathways complicate the regulation of product selectivity. Most studies in this field have focused on increasing productivity rather than on controlling product formation. To date, the major products of photocatalytic CO2 reduction reactions (CO2RRs) are C1 compounds, as opposed to the higher-value C2 compounds, because of the low C2 selectivity of this process. The design of C-C coupled pathways is paramount to facilitate selective access to C2 products in the photocatalytic CO2RR. In this review, we discuss the mechanisms and pathways of CO2RR product generation based on recent research results and summarise the work on CO2RR to C2 products. This review aims to modulate the product-generation pathway to improve the yield and selectivity of C2 products by facilitating C-C coupling reactions. Finally, some of the current challenges in the field of the CO2RR to C2 are outlined, including possible mechanistic interpretations, cost of catalyst use, reactor design, and potential solutions.

Emerging ZnO Semiconductors for Photocatalytic CO2 Reduction to Methanol

Carbon recycling is poised to emerge as a prominent trend for mitigating severe climate change and meeting the rising demand for energy. Converting carbon dioxide (CO2) into green energy and valuable feedstocks through photocatalytic CO2 reduction (PCCR) offers a promising solution to global warming and energy needs. Among all semiconductors, zinc oxide (ZnO) has garnered considerable interest due to its ecofriendly nature, biocompatibility, abundance, exceptional semiconducting and optical properties, cost-effectiveness, easy synthesis, and durability. This review thoroughly discusses recent advances in mechanistic insights, fundamental principles, experimental parameters, and modulation of ZnO catalysts for direct PCCR to C1 products (methanol). Various ZnO modification techniques are explored, including atomic size regulation, synthesis strategies, morphology manipulation, doping with cocatalysts, defect engineering, incorporation of plasmonic metals, and single atom modulation to boost its photocatalytic performance. Additionally, the review highlights the importance of photoreactor design, reactor types, geometries, operating modes, and phases. Future research endeavors should prioritize the development of cost-effective catalyst immobilization methods for solid-liquid separation and catalyst recycling, while emphasizing the use of abundant and non-toxic materials to ensure environmental sustainability and economic viability. Finally, the review outlines key challenges and proposes novel directions for further enhancing ZnO-based photocatalytic CO2 conversion processes.

A Review of the Effect of Defect Modulation on the Photocatalytic Reduction Performance of Carbon Dioxide

Constructive defect engineering has emerged as a prominent method for enhancing the performance of photocatalysts. The mechanisms of the influence of defect types, concentrations, and distributions on the efficiency, selectivity, and stability of CO2 reduction were revealed for this paper by analyzing the effects of different types of defects (e.g., metallic defects, non-metallic defects, and composite defects) on the performance of photocatalysts. There are three fundamental steps in defect engineering techniques to promote photocatalysis, namely, light absorption, charge transfer and separation, and surface-catalyzed reactions. Defect engineering has demonstrated significant potential in recent studies, particularly in enhancing the light-harvesting, charge separation, and adsorption properties of semiconductor photocatalysts for reducing processes like carbon dioxide reduction. Furthermore, this paper discusses the optimization method used in defect modulation strategy to offer theoretical guidance and an experimental foundation for designing and preparing efficient and stable photocatalysts.

A 0D-2D Heterojunction Bismuth Molybdate-Anchored Multifunctional Hydrogel for Highly Efficient Eradication of Drug-Resistant Bacteria

Due to the increasing antibiotic resistance and the lack of broad-spectrum antibiotics, there is an urgent requirement to develop fresh strategies to combat multidrug-resistant pathogens. Herein, defect-rich bismuth molybdate heterojunctions [zero-dimensional (0D) Bi4MoO9/two-dimensional (2D) Bi2MoO6, MBO] were designed for rapid capture of bacteria and synergistic photocatalytic sterilization. The as-prepared MBO was experimentally and theoretically demonstrated to possess defects, heterojunctions, and irradiation triple-enhanced photocatalytic activity for efficient generation of reactive oxygen species (ROS) due to the exposure of more active sites and separation of effective electron-hole pairs. Meanwhile, dopamine-modified MBO (pMBO) achieved a positively charged and rough surface, which conferred strong bacterial adhesion and physical penetration to the nanosheets, effectively trapping bacteria within the damage range and enhancing ROS damage. Based on this potent antibacterial ability of pMBO, a multifunctional hydrogel consisting of poly(vinyl alcohol) cross-linked tannic acid-coated cellulose nanocrystals (CPTB) and pMBO, namely CPTB@pMBO, is developed and convincingly effective against methicillin-resistant Staphylococcus aureus in a mouse skin infection model. In addition, the strategy of combining a failed beta-lactam antibiotic with CPTB@pMBO to photoinactivation with no resistance observed was developed, which presented an idea to address the issue of antibiotic resistance in bacteria and to explore facile anti-infection methods. In addition, CPTB@pMBO can reduce excessive proteolysis of tissue and inflammatory response by regulating the expression of genes and pro-inflammatory factors in vivo, holding great potential for the effective treatment of wound infections caused by drug-resistant bacteria.

Plasmonic Photocatalysis for CO2 Reduction: Advances, Understanding and Possibilities

Plasmonic photocatalysis for CO₂ reduction is attracting increasing attention due to appealing properties and great potential for real applications. In this review, the fundamentals of plasmonic photocatalysis and the most recent developments regarding its application in driving CO₂ reduction are reported. Firstly, we present the review on the mechanism of plasmonic photocatalytic CO₂ reduction, the energy transfer of plasmon, and the CO₂ reduction process on the catalyst surface. Then, the modulation on the plasmonic nanostructures and also the semiconductor counterpart to regulate CO₂ photoreduction is discussed. Next, the influence of the core-shell structure and the interface between the plasmonic metal and semiconductor on the CO₂ photoreduction performance is also outlined. In addition, the latest progress on the emerging direction regarding the plasmonic photocatalysis for methane dry reforming with CO₂ is especially emphasized. Finally, a summary on the challenges and prospects of this promising field are provided.

Single-Atom Catalysts (SACs) for Photocatalytic CO2 Reduction with H2 O: Activity, Product Selectivity, Stability, and Surface Chemistry

In recent years, single-atom catalysts (SACs) have attracted the interest of researchers owing to their suitability for various catalytic applications. For instance, their optoelectronic features, site-specific activity, and cost-effectiveness make SACs ideal for photocatalytic CO₂ reduction. The activity, product selectivity, and photostability of SACs depend on various factors such as the nature of the metal/support material, the interaction between the metal atoms and support, light-harvesting ability, charge separation behavior, CO₂ adsorption ability, active sites, and defects. Consequently, it is necessary to investigate these factors in depth to elucidate the working principle(s) of SACs for catalytic applications. Herein, the recent progress in the development of SACs for photocatalytic CO₂ reduction with H₂ O is reviewed. First, a brief overview of CO₂ photoreduction and SACs for CO₂ conversion is provided. Several synthesis strategies and useful techniques for characterizing SACs employed in heterogeneous catalysis are then described. Next, the challenges of SACs for photocatalytic CO₂ reduction and related optimization strategies, in terms of activity, product selectivity, and stability, are explored. The progress in the development of noble metal- and transition metal-based SACs and dual-SACs for photocatalytic CO₂ reduction is discussed. Finally, the prospects of SACs for CO₂ reduction are considered.

Photocatalytic CO2 Reduction Coupled with Alcohol Oxidation over Porous Carbon Nitride

The photocatalytic transformation of CO2 to valuable man-made feedstocks is a promising method for balancing the carbon cycle; however, it is often hampered by the consumption of extra hole scavengers. Here, a synergistic redox system using photogenerated electron-hole pairs was constructed by employing a porous carbon nitride with many cyanide groups as a metal-free photocatalyst. Selective CO2 reduction to CO using photogenerated electrons was achieved under mild conditions; simultaneously, various alcohols were effectively oxidized to value-added aldehydes using holes. The results showed that thermal calcination process using ammonium sulfate as porogen contributes to the construction of a porous structure. As-obtained cyanide groups can facilitate charge carrier separation and promote moderate CO2 adsorption. Electron-donating groups in alcohols could enhance the activity via a faster hydrogen-donating process. This concerted photocatalytic system that synergistically utilizes electron-hole pairs upon light excitation contributes to the construction of cost-effective and multifunctional photocatalytic systems for selective CO2 reduction and artificial photosynthesis.