Pore size engineering of cost-effective all-nanoporous multilayer membranes for propane/propylene separation

In this study, a new multi-layer hybrid nanocomposite membrane named MFI/GO/ZIF-8 has been synthesized. This membrane combines three nanoporous materials with different morphologies in one membrane without using polymer materials. This allows access to a previously accessible region of very high permeability and selectivity properties. In addition to introducing a new and efficient MFI/GO/ZIF-8 membrane in this work, controlling the pore size of the zeolite layer has been investigated to increase the selectivity and permeability of propylene. The membrane was made using a solvent-free hydrothermal method and a layer-by-layer deposition method. To control the pore size of the MFI layer, a two-step synthesis strategy has been implemented. In the first step, three key parameters, including crystallization time, NaOH concentration and aging time of initial suspension, are controlled. In the second step, the effect of three additional parameters including hydrothermal time, hydrothermal temperature and NH4F concentration has been investigated. The results show that the optimal pore size has decreased from 177.8 nm to 120.53 nm (i.e., 32.2%). The MFI/GO/ZIF-8 membrane with fine-tuned crystal size in the zeolite layer was subjected to detailed tests for propylene selectivity and permeability. The structural characteristics of the membrane were also performed using FT-IR, XRD, FESEM and EDS techniques. The results show that the synergistic interaction between the three layers in the nanocomposite membrane significantly improves the selectivity and permeability of propylene. The permeability and selectivity of propylene increased from 50 to 60 GPU and from 136 to 177, respectively, before and after precise crystal size control. MFI/GO/ZIF-8 membrane by controlling the pore size of the zeolite layer shows a significant increase of 23.1% in selectivity and 16.7% in propylene permeability compared to the initial state. Also, due to the precise synthesis method, the absence of solvent and the use of cheap support, the prepared membrane is considered an environmentally friendly and low-cost membrane. This study emphasizes the potential of increasing the selectivity and permeability of propylene in the MFI/GO/ZIF-8 hybrid membrane by controlling the crystal size of the zeolite layer.

All-Nanoporous Hybrid Membranes: Incorporating Zeolite Nanoparticles and Nanosheets with Zeolitic Imidazolate Framework Matrices

Metal-organic framework (MOF) membranes have attractive molecular separation properties but require challenging thin-film deposition techniques on expensive/specialty supports to obtain high performance relative to conventional polymer membranes. We demonstrate and analyze in detail the new concept of all-nanoporous hybrid membranes (ANHMs), which combines two or more nanoporous materials of different morphologies into a single membrane without the use of any polymeric materials. This allows access to a previously inaccessible region of very high permeability and selectivity properties, a feature that enables ANHMs to show high performance even when fabricated with simple coating and solvent evaporation methods on low-cost supports. We synthesize several types of ANHMs that combine the MOF material ZIF-8 with the high-silica zeolite MFI (the latter being employed in both nanoparticle and nanosheet forms). We show that continuous ANHMs can be obtained with high (∼50%) volume fractions of both MOF and zeolite components. Analysis of the multilayer microstructures of these ANHMs by multiple techniques allows estimation of the propylene/propane separation properties of individual ANHM layers, providing initial insight into the dramatically increased permeability and selectivity observed in ANHMs in relation to single-phase nanoporous membranes.

In situ Raman and FTIR spectroscopic study on the formation of the isomers MIL-68(Al) and MIL-53(Al)

The paper describes a method to induce the formation of MIL-68(Al) rather than MIL-53(Al) using a formic acid modulated synthesis approach.

Comment on “Insight into the reversible structural crystalline-state transformation from MIL-53(Al) to MIL-68(Al)” by A. Perea-Cachero, E. Romero, C. Téllez and J. Coronas, CrystEngComm, 2018, 20, 402

The inadvertently published phase transformation from MIL-53 to MIL-68 is merely a deformation of the MIL-53 structure upon DMF adsorption.

Retracted Article: Insight into the reversible structural crystalline-state transformation from MIL-53(Al) to MIL-68(Al)

The reversible crystalline transformation from MIL-53(Al) into MIL-68(Al) was accomplished.