The Effect of Base and Nucleophile on the Nucleophilic Substitution of Methoxytropone Derivatives: An Easy Access to 4- and 5-Substituted Multifunctional Azulenes

The nucleophilic substitution on 3-substituted 2-methoxytropones to form azulenes is dependent on the nucleophile and base employed. With bulkier nucleophiles (ethyl/methyl cyanoacetate), the reaction proceeds with the abnormal nucleophilic substitution irrespective of the base and with smaller nucleophiles (malononitrile), the reaction follows base-dependent normal and abnormal nucleophilic substitution. Thus, the methodologies are developed to selectively obtain 4- and 5-substituted azulenes based on the nature of bases and nucleophiles employed.

Abnormal Nucleophilic Substitution on Methoxytropone Derivatives: Steric Strategy to Synthesize 5-Substituted Azulenes

Azulene is a non-alternant non-benzenoid aromatic system, and in turn, it possesses unusual photophysical properties. Azulene-based conjugated systems have received increasing interest in recent years as optoelectronic materials. Despite the routes available for the preparation of substituted azulene derivatives, there remain few methods that allow regioselective substitution on the seven-membered ring of azulenes due to the subtle reactivity difference among the various positions. This report explores the reactivity of substituted tropolones as the azulene precursors and also provides a new method to create 5-substituted azulenes. The reaction of cyanoacetate enolate with unsubstituted 2-methoxytropone affords azulene through the attack of the nucleophile on the C-2 center (normal pathway). We have observed that 3-substituted 2-methoxytropones undergo steric-guided nucleophilic addition at the C-7 center (abnormal pathway) to afford 5-substituted azulene derivatives. Based on this observation and DFT calculation, a new synthetic strategy is devised for the regioselective synthesis of 5-substituted multifunctional azulenes, which cannot be accessed by any other method.

The quest for determining one-electron redox potentials of azulene-1-carbonitriles by calculation

Electrochemical processes drive many chemical and biochemical reactions. Theoretical methods to accurately predict redox potentials are therefore crucial for understanding these reactions and designing new chemical species with desired properties. We have investigated a theoretical methodology using electronic structure methods based on density functional theory and continuum solvation models. These methods have been validated with linear correlation plots comparing theoretical and experimental results for the redox properties of a series of azulene derivatives. The results showed excellent correlations despite only minor structural variations of the azulenes, which support this rather simple theoretical methodology for determining redox potentials of organic molecules. Furthermore, we have estimated the absolute redox potential of the ferrocene/ferrocenium redox couple to be 4.8 ± 0.1 V in dichloromethane, which is slightly lower than previous estimates.

Evaluating Dihydroazulene/Vinylheptafulvene Photoswitches for Solar Energy Storage Applications

Efficient solar energy storage is a key challenge in striving toward a sustainable future. For this reason, molecules capable of solar energy storage and release through valence isomerization, for so-called molecular solar thermal energy storage (MOST), have been investigated. Energy storage by photoconversion of the dihydroazulene/vinylheptafulvene (DHA/VHF) photothermal couple has been evaluated. The robust nature of this system is determined through multiple energy storage and release cycles at elevated temperatures in three different solvents. In a nonpolar solvent such as toluene, the DHA/VHF system can be cycled more than 70 times with less than 0.01 % degradation per cycle. Moreover, the [Cu(CH3 CN)4 ]PF6 -catalyzed conversion of VHF into DHA was demonstrated in a flow reactor. The performance of the DHA/VHF couple was also evaluated in prototype photoconversion devices, both in the laboratory by using a flow chip under simulated sunlight and under outdoor conditions by using a parabolic mirror. Device experiments demonstrated a solar energy storage efficiency of up to 0.13 % in the chip device and up to 0.02 % in the parabolic collector. Avenues for future improvements and optimization of the system are also discussed.

The influence of cathode material on electrochemical degradation of trichloroethylene in aqueous solution

In this study, different cathode materials were evaluated for electrochemical degradation of aqueous phase trichloroethylene (TCE). A cathode followed by an anode electrode sequence was used to support reduction of TCE at the cathode via hydrodechlorination (HDC). The performance of iron (Fe), copper (Cu), nickel (Ni), aluminum (Al) and carbon (C) foam cathodes was evaluated. We tested commercially available foam materials, which provide large electrode surface area and important properties for field application of the technology. Ni foam cathode produced the highest TCE removal (68.4%) due to its high electrocatalytic activity for hydrogen generation and promotion of HDC. Different performances of the cathode materials originate from differences in the bond strength between atomic hydrogen and the material. With a higher electrocatalytic activity than Ni, Pd catalyst (used as cathode coating) increased TCE removal from 43.5% to 99.8% for Fe, from 56.2% to 79.6% for Cu, from 68.4% to 78.4% for Ni, from 42.0% to 63.6% for Al and from 64.9% to 86.2% for C cathode. The performance of the palladized Fe foam cathode was tested for degradation of TCE in the presence of nitrates, as another commonly found groundwater species. TCE removal decreased from 99% to 41.2% in presence of 100 mg L(-1) of nitrates due to the competition with TCE for HDC at the cathode. The results indicate that the cathode material affects TCE removal rate while the Pd catalyst significantly enhances cathode activity to degrade TCE via HDC.

Photoreaction of matrix-isolated dihydroazulene-functionalized molecules on Au{111}

Dihydroazulenes are photochromic molecules that reversibly switch between two distinct geometric and conductivity states. Molecular design, surface attachment, and precise control over the assembly of such molecular machines are critical in order to understand molecular function and motion at the nanoscale. Here, we use surface-enhanced Raman spectroscopy on special atomically flat, plasmonically enhanced substrates to measure the photoreaction kinetics of isolated dihydroazulene-functionalized molecules assembled on Au{111}, which undergo a ring-opening reaction upon illumination with UV light and switch back to the initial isomer via thermal relaxation. Photokinetic analyses reveal the high efficiency of the dihydroazulene photoreaction on solid substrates compared to other photoswitches. An order of magnitude decrease in the photoreaction cross section of surface-bound dihydroazulenes was observed when compared with the cross sections of these molecules in solution.

On the bromination of the dihydroazulene/vinylheptafulvene photo-/thermoswitch

BACKGROUND

The dihydroazulene (DHA)/vinylheptafulvene (VHF) system (with two cyano groups at C1) functions as a photo-/thermoswitch. Direct ionic bromination of DHA has previously furnished a regioselective route to a 7,8-dibromide, which by elimination was converted to a 7-bromo-substituted DHA. This compound has served as a central building block for functionalization of the DHA by palladium-catalyzed cross-coupling reactions. The current work explores another bromination protocol for achieving the isomeric 3-bromo-DHA and also explores the outcome of additional bromination of this compound as well as of the known 7-bromo-DHA.

RESULTS

Radical bromination on two different VHFs by using N-bromosuccinimide/benzoyl peroxide and light, followed by a ring-closure reaction generated the corresponding 3-bromo-DHAs, as confirmed in one case by X-ray crystallography. According to a (1)H NMR spectroscopic study, the ring closure of the brominated VHF seemed to occur readily under the reaction conditions. A subsequent bromination-elimination protocol provided a 3,7-dibromo-DHA. In contrast, treating the known 7-bromo-DHA with bromine generated a very labile species that was converted to a new 3,7-dibromoazulene, i.e., the fully unsaturated species. Azulenes were also found to form from brominated compounds when left standing for a long time in the solid state. Kinetics measurements reveal that the 3-bromo substituent enhances the rate of the thermal conversion of the VHF to DHA, which is opposite to the effect exerted by a bromo substituent in the seven-membered ring.

CONCLUSION

Two general procedures for functionalizing the DHA core with a bromo substituent (at positions 3 and 7, respectively) are now available with the DHA as starting material.

Arylethynyl derivatives of the dihydroazulene/vinylheptafulvene photo/thermoswitch: tuning the switching event

A selection of dihydroazulene (DHA) photoswitches incorporating an arylethynyl-substituent in the seven-membered ring was prepared by palladium-catalyzed Sonogashira cross-coupling reactions employing a suitable bromo-functionalized DHA. Shielding of the alkyne bridge and separating the aryl and DHA units, by sterically demanding groups, was required to obtain stable compounds. The DHAs underwent a light-induced ring-opening to vinylheptafulvenes (VHFs) which were thermally converted to a mixture of two DHA regioisomers, one of which was the original one. The influence of the aryl groups on the DHA and VHF absorptions and on their interconversion was investigated in detail. The rates of the switching events were finely tuned by the donor or acceptor strength of the aryl group. The thermal ring closure was found to proceed most readily in the presence of an electron-donating group on the seven-membered ring. The rate constant was found to follow a Hammett linear free energy correlation, which signals that stabilization of a positive charge in the seven-membered ring plays a crucial role in the ring-closure reaction. In view of these findings, it was possible to control the switching event by protonation/deprotonation of an anilino-substituted DHA. Also, the light-induced ring opening reaction was strongly controlled by acid/base. In addition to the mesomeric effects exerted by an arylethynyl group, the inductive effects exerted by different groups on the thermal ring closure were elucidated. Although the alkyne bridge transmits the electronic character of the aryl group, the ring-closure is retarded for all the ethynylated compounds relative to the parent unsubstituted compound. Along with our synthesis of suitable arylalkynes, we discovered an interesting byproduct in a Sonogashira cross-coupling reaction involving a nitrophenyl group, namely a diaryl azoxy compound. Its structure was confirmed by X-ray crystallographic analysis.