Thin Layer Coulometry of Nitrite with Ion-Selective Membranes

Approaching to Calibration-Free Ion Detection Based on Thin Layer Coulometry with Ultrathin Ion-Selective Membranes

In pursuit of calibration-free all-solid-state ion-selective electrodes (ISEs), we propose a coulometry strategy based on thin-layer samples confined adjacent to the ion-selective membrane (ISM) surface, with the system being controlled under a cathodic potential sweep. The ion-to-electron transducer in the ISE is the conducting polymer poly(3-octylthiophene) (POT), the oxidation state of which changes upon the application of a cathodic sweep and triggers the accumulation of the preferred cation in the ISM. This accumulation is provided of absolute nature (i.e., the cation concentration is totally depleted in the sample) when the capacity of the membrane encompasses the charge of the cation of interest in the sample (K+ in this case). As such, the ion exchanger content of the ISM is fixed to 18 μC, being able to accumulate a K+ concentration from the solution in the range of 5-40 μM. The charge transfer in the POT film ultimately leads to the K+ transfer at the ISM-sample interface, depleting its content in the thin-layer sample with demonstrated efficiency (∼100% at 5 and 1 mV s-1). The charge is directly proportional to the corresponding concentration via the Faraday law, constituting the core principle of the calibration-free approach. In essence, there is no need of calibrating the sensor, because the K+ concentration can be obtained from the charge by knowing the sample volume with certain precision (volume of 5 μL, with the sample thickness being 100 ± 5 μm). The conceptual innovation introduced in this Letter is accompanied by the validated calibration-free detection of K+ in five real samples, demonstrating the plausibility of the approach to contribute to the measurement science field, especially in the direction of fulfilling the gap between benchtop trials and the end users of electrochemical sensors. It is key to put efforts into calibration-free sensors to address real world applications such as point-of-care, wearable sensors for well-being, and environmental in situ monitoring, among others.

Voltammetric Ion-Selective Electrodes in Thin-Layer Samples: Absolute Detection of Ions Using Ultrathin Membranes

Calibration-free sensors are generally understood as analytical tools with no need for calibration apart from the initial one (i.e., after its fabrication). However, an "ideal" and therefore "more restricted" definition of the concept considers that no calibration is necessary at all, with the sensor being capable of directly providing the analyte concentration in the sample. In the electroanalysis field, investigations have been directed to charge-based readouts (i.e., coulometry) that allow for concentration calculation via the Faraday Law: The sample volume must be precisely defined and the absoluteness of the electrochemical process in which the analyte is involved must be ensured (i.e., the analyte in the sample is ∼100% converted/transported). Herein, we report on the realization of calibration-free coulometric ISEs based on ultrathin ion-selective membranes, which is demonstrated for the detection of potassium ions (K+). In essence, the K+ transfer at the membrane-sample interface is modulated by the oxidation state of the conducting polymer underlying the membrane. The accumulation/release of K+ to/from the membrane is an absolute process owing to the confinement of the sample to a thin-layer domain (thickness of <100 μm). The capacity of the membrane expressed in charge is fixed to ca. 18 μC, and this dictates the detection of micromolar levels of K+ present in ca. 5 μL sample volume. The system is interrogated with cyclic voltammetry to obtain peaks related to the K+ transfer that can be treated charge-wise. The conceptual and technical innovative steps developed here made the calibration-free detection of K+ possible in artificial and real samples with acceptable accuracy (<10% difference compared with the results obtained from a current-based calibration and ion chromatography). The charge-based analysis does not depend on temperature and appeared to be repetitive, reproducible, and reversible in the concentration range from 1 to 37.5 μM, with an average coulometry efficiency of 96%.

Modern Potentiometric Biosensing Based on Non-Equilibrium Measurement Techniques

Modern potentiometric sensors based on polymeric membrane ion-selective electrodes (ISEs) have achieved new breakthroughs in sensitivity, selectivity, and stability and have extended applications in environmental surveillance, medical diagnostics, and industrial analysis. Moreover, nonclassical potentiometry shows promise for many applications and opens up new opportunities for potentiometric biosensing. Here, we aim to provide a concept to summarize advances over the past decade in the development of potentiometric biosensors with polymeric membrane ISEs. This Concept article articulates sensing mechanisms based on non-equilibrium measurement techniques. In particular, we emphasize new trends in potentiometric biosensing based on attractive dynamic approaches. Representative examples are selected to illustrate key applications under zero-current conditions and stimulus-controlled modes. More importantly, fruitful information obtained from non-equilibrium measurements with dynamic responses can be useful for artificial intelligence (AI). The combination of ISEs with advanced AI techniques for effective data processing is also discussed. We hope that this Concept will illustrate the great possibilities offered by non-equilibrium measurement techniques and AI in potentiometric biosensing and encourage further innovations in this exciting field.

Advancements in Preprocessing and Analysis of Nitrite and Nitrate since 2010 in Biological Samples: A Review

As a substance present in organisms, nitrite is a metabolite of nitric oxide and can also be ingested. Nitrate is the metabolite of nitrite. Therefore, it is necessary to measure it quickly, easily and accurately to evaluate the health status of humans. Although there have been several reviews on analytical methods for non-biological samples, there have been no reviews focused on both sample preparation and analytical methods for biological samples. First, rapid and accurate nitrite measurement has significant effects on human health. Second, the detection of nitrite in biological samples is problematic due to its very low concentration and matrix interferences. Therefore, the pretreatment plus measuring methods for nitrite and nitrate obtained from biological samples since 2010 are summarized in the present review, and their prospects for the future are proposed. The treatment methods include liquid-liquid microextraction, various derivatization reactions, liquid-liquid extraction, protein precipitation, solid phase extraction, and cloud point extraction. Analytical methods include spectroscopic methods, paper-based analytical devices, ion chromatography, liquid chromatography, gas chromatography-mass spectrometry, electrochemical methods, liquid chromatography-mass spectrometry and capillary electrophoresis. Derivatization reagents with rapid quantitative reactions and advanced extraction methods with high enrichment efficiency are also included. Nitrate and nitrate should be determined at the same time by the same analytical method. In addition, much exploration has been performed on formulating fast testing through microfluidic technology. In this review, the newest developments in nitrite and nitrate processing are a focus in addition to novel techniques employed in such analyses.

From Molecular and Emulsified Ion Sensors to Membrane Electrodes: Molecular and Mechanistic Sensor Design

Selective molecular ion probes are often insoluble in water and require a hydrophobic solvent environment for strong and selective binding, which runs counter to the desire of utilizing them in a homogeneous solution. This Account aims to guide the reader on how such molecules, often coined ionophores, can be harnessed to design exceptionally useful optical and electrochemical sensors. We start here with some historical context on the design of such ionophores and continue with the explanation of the response mechanism of optical and potentiometric sensors and the role of combined components to build a robust ion sensor. This Account is addressed to nonspecialist readers and for this reason avoids extensive use of equations or theoretical considerations. The interested reader should turn to the original literature for further reading. Emulsified optical sensors are introduced as an initial example. Here, multiple reagents are confined in an attoliter sensing nanodroplet of the organic phase, immiscible with the aqueous sample phase. In this case, the ionophore molecules may retain their high affinity and selectivity to the target ion and the aqueous sample phase does not have to be modified. Emulsified optical sensors allow one to achieve the selective chemical sensing of ions, even with optically silent ionophores. Such ionophore-based nanodroplets are also discussed as a useful novel class of complexometric titration reagents and optical end point indicators with unique selectivities. We then turn our attention to potentiometric sensing probes and briefly discuss the unique opportunity of a direct characterization of ion-ionophore complexation properties offered by membrane electrodes. A carbonate-selective membrane electrode containing a highly selective tweezer-type ionophore with trifluoroacetophenone functional groups is then used as an example for the construction of a robust all-solid-state sensor. This potentiometric probe, in combination with a pH electrode, can directly measure PCO₂ in freshwater lakes, demonstrating a dramatically improved response time relative to traditional sensors equipped with a gas-permeable membrane. In recent years, new sensing modes and electrode designs have been introduced to expand the application scope of ionophore-based potentiometric sensors. Membrane electrodes containing ionophores are placed under dynamic electrochemistry control to give important progress in the field. We specifically highlight our recent works by membranes that are controlled by chronopotentiometry (controlled current) for speciation analysis, by ion transfer voltammetry on thin sensing films for multianalyte detection, by exhaustive coulometry for potentially calibration-free sensors and with coulometric membrane pumps for the selective delivery of reagents.

Reliable SERS detection of nitrite based on pH and laser irradiance-dependent diazotization through a convenient sampling micro-chamber

A SERS-enabled micro-chamber was constructed for reliable and pretreatment-free detection of NO₂⁻based on a pH and laser irradiance-dependent diazotization.