Enzyme-Assisted Fluorescence Biosensor Based on Circular Single-Stranded DNA Without Group Modification for MicroRNA Detection

Fluorescent biosensor, which has the characteristics of high sensitivity, specificity, and low cost, can be directly detected in physiological fluids such as blood and serum. Therefore, the development of fluorescence sensor platforms for miRNA detection has a positive effect on the prevention and treatment of various diseases. In this paper, miR-34a was selected as a biological indicator of Alzheimer's disease (AD). We designed a circular single-stranded DNA (CSSD) biosensor, which uses two unmodified single-stranded DNA (ssDNA) with complementary ends, DNAa and DNAb, to form CSSD by DNA sequence pairing to improve thermal stability and achieve signal amplification. At the same time, CSSD can react with miR-34a, and then the DNA of the DNA-RNA chain is hydrolyzed by duplex-specific nuclease (DSN enzyme). Finally, miR-34a is released to partake in the subsequent step, thus realizing cycle amplification. By evaluating the change in fluorescence signal under the optimized conditions, we discovered that this approach exhibits impressive sensitivity, with a detection threshold reaching as low as 0.36 nM. This surpasses the performance of numerous preceding miRNA detection biosensors. Furthermore, the system displays excellent detection capabilities even in intricate settings like serum, showcasing a strong ability to differentiate and choose effectively. In summary, this is a signal-off fluorescent biosensor, which realizes the purpose of double amplification of biosensor signal by using CSSD and enzyme assistance so that it can be used as a valuable tool for early diagnosis of diseases.

Zip Nucleic Acid-Based Genomagnetic Assay for Electrochemical Detection of microRNA-34a

Zip nucleic acid (ZNA)-based genomagnetic assay was developed herein for the electrochemical detection of microRNA-34a (miR-34a), which is related to neurological disorders and cancer. The hybridization between the ZNA probe and miR-34a target was performed in the solution phase; then, the resultant hybrids were immobilized onto the surface of magnetic beads (MBs). After magnetic separation, the hybrids were separated from the surface of MBs and then immobilized on the surface of pencil graphite electrodes (PGEs). In the case of a full-match hybridization, the guanine oxidation signal was measured via the differential pulse voltammetry (DPV) technique. All the experimental parameters that influenced the hybridization efficiency (i.e., hybridization strategy, probe concentration, hybridization temperature, etc.) were optimized. The cross-selectivity of the genomagnetic assay was tested against two different miRNAs, miR-155 and miR-181b, individually as well as in mixture samples. To show the applicability of the ZNA-based genomagnetic assay for miR-34a detection in real samples, a batch of experiments was carried out in this study by using the total RNA samples isolated from the human hepatocellular carcinoma cell line (HUH-7).

The Influence of Graphene Oxide Composition on Properties of Surface-Modified Metal Electrodes

The present paper describes the effect of the concentration of two graphene oxides (with different oxygen content) in the modifier layer on the electrochemical and structural properties of noble metal disk electrodes used as working electrodes in voltammetry. The chemistry of graphene oxides was tested using EDS, FTIR, UV-Vis spectroscopy, and combustion analysis. The structural properties of the obtained modifier layers were examined by means of scanning electron and atomic force microscopy. Cyclic voltammetry was employed for comparative electrochemical studies.

Graphene-Oxide and Ionic Liquid Modified Electrodes for Electrochemical Sensing of Breast Cancer 1 Gene

Graphene-oxide and ionic liquid composite-modified pencil graphite electrodes (GO-IL-PGEs) were developed and used as a sensing platform for breast cancer 1 (BRCA1) gene detection. The characterization of GO-IL modified electrodes was executed by scanning electron microscopy (SEM), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The nucleic-acid hybridization was monitored by a differential pulse voltammetry (DPV) technique by directly measuring the guanine oxidation signal without using any indicator. The effects of the IL concentration, the probe concentration, and the hybridization time were optimized to the biosensor response. The limit of detection (LOD) was calculated in the concentration range of 2–10 μg/mL for the BRCA1 gene and found to be 1.48 µg/mL. The sensitivity of the sensor was calculated as 1.49 µA mL/µg cm². The developed biosensor can effectively discriminate the complementary target sequence in comparison to a three-base-mismatched sequence or the non-complementary one.

Paper-based electrode assemble for impedimetric detection of miRNA

In the present work, a paper-based electrode assemble was developed and implemented to detect target microRNA 155 (miRNA 155) via electrochemical impedance spectroscopy (EIS) measurements. In this concept, gold nanoparticles (AuNPs) modified paper based electrode assemble system (AuNP-PE) was designed, and characterized by scanning electron microscopy (SEM), cyclic voltammetry (CV) and EIS measurements. The impedimetric detection of miRNA 155 was performed by measuring the fractional change at the charge transfer resistance (R_ct). The detection limits were found as 33.8 nM in PBS and 93.4 nM in fetal bovine serum (FBS) medium, respectively. The selectivity of the proposed assay was tested against to non-complementary (NC) and mismatch (MM) miRNA sequences in the presence of mixture sample containing miRNA:NC (1:1) and miRNA:MM (1:1) in PBS (pH 7.40) or FBS. The analytical performance and the selectivity of impedimetric biosensor were also tested in FBS.

Construction of an ultrasensitive electrochemical sensing platform for microRNA-21 based on interface impedance spectroscopy

A hybridization chain reaction (HCR) amplification-based electrochemical impedimetric biosensor is fabricated for the quick, sensitive, and specific detection of miRNA-21 (miR-21) via monitoring of electrode interfacial property changes in real-time. Two sequences of H1 and H2 are adopted to trigger HCR amplification. A large amount of linear DNA concatemer are formed which could change the interfacial properties of the electrode. Interfacial charge transfer resistance difference (R_ct) is probed via electrochemical impedance spectroscopy (EIS) and Randles equivalent circuit. After amplifying via HCR, oligonucleotides with negatively charged repelling [Fe(CN)₆]^3-/4- ions can form a spatial blockage. HCR amplification strategy markedly enhanced the electrochemical signal with a limit of detection (LOD) down to 4.63 fM (S/N = 3). This strategy exhibited excellent selectivity for three different miRNAs: miR-199a, miR-141, and miR-155. Moreover, results show that the proposed method can be applied to miR-21 detection in the total RNA extracted from five cells. This work presents an enzyme-free and label-free EIS nucleic acid sensor for sensitively and selectively detecting miR-21, offering a promising approach in early diseases diagnosis.

Voltammetric detection of miRNA hybridization based on electroactive indicator-cobalt phenanthroline

The indicator-based nucleic acid detection protocol is one of the major approaches to monitor the sequence-selective nucleic acid hybridization-mediated recognition events in biochemical analysis. The metal complex, cobalt phenanthroline, [Co(phen)33+], which is one of the electroactive indicators, interacts more with double stranded nucleic acids via intercalation. Thus, this interaction permits an increase at the electrochemical signal of [Co(phen)33+]. In our study, the interaction of metal complex, [Co(phen)33+] with nucleic acids was examined using pencil graphite electrodes (PGEs) in combination with differential pulse voltammetry (DPV) technique. The voltammetric detection of miRNA-34a was investigated based on the changes at the electrochemical signal of [Co(phen)33+] under optimized experimental conditions; such as accumulation potentialof metal complex and DNA probe concentration, hybridization time, target miRNA concentration. Furthermore, the selectivity of electrochemical miRNA-34a biosensor was studied in contrast to different miRNAs. The applicability of indicator-based biosensor specific to miRNA-34a was also presented by using total RNA samples.

An Impedimetric Biosensor Based on Ionic Liquid-Modified Graphite Electrodes Developed for microRNA-34a Detection

In the present work, an impedimetric nucleic acid biosensor has been designed for the purpose of detection of microRNA (miRNA). Ionic liquid (1-butyl-3-methylimidazolium hexafluorophosphate (IL))-modified chemically activated pencil graphite electrodes (PGEs) were used for the sensitive and selective detection of miRNA-34a. After covalent activation of the PGE surface using covalent agents (CAs), the ionic liquid (IL) was immobilized onto the surface of the chemically activated PGE by passive adsorption. The electrochemical and microscopic characterization of the IL/CA/PGEs was performed by electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) and scanning electron microscopy (SEM). DNA probe concentration, miRNA target concentration, and also the hybridization time and wet adsorption time were optimized by using the EIS technique. Then, the hybridization occurred between specific DNA probes and miRNA-34a was immobilized onto the surface of the IL/CA/PGEs. The impedimetric detection of miRNA-DNA hybrid was performed by EIS. The detection limit (DL) was calculated in a linear concentration range of 2⁻10 µg/mL miRNA-34a target, and it was found to be 0.772 µg/mL (109 nM) in phosphate buffer solution (PBS) and 0.826 µg/mL (117 nM) in diluted fetal bovine serum (FBS). The selectivity of impedimetric biosensor for miRNA-34a was also tested against to other non-complementary miRNA sequences both in buffer media, or diluted FBS.