Simultaneous recognition of dopamine and uric acid in real samples through highly sensitive new electrode fabricated using ZnO/carbon quantum dots: bio-imaging and theoretical studies

Dopamine (DA) and uric acid (UA), which are vital components in human metabolism, cause several health problems if they are present in altered concentrations; thus, the determination of DA and UA is essential in real samples using selective sensors. In the present study, graphite carbon paste electrodes (CPE) were fabricated using ZnO/carbon quantum dots (ZnO/CQDs) and employed as electrochemical sensors for the detection of DA and UA. These electrodes were fully characterized via different analytical techniques (XRD, SEM, TEM, XPS, and EDS). The electrochemical responses from the modified electrodes were evaluated using cyclic voltammetry, square wave voltammetry, and electrochemical impedance spectroscopy. The results showed that the present electrode has exhibited high sensitivity towards DA, recognizing even at low concentrations (0.12 μM), and no inference was observed in the presence of UA. The ZnO/CQD electrode was applied for the simultaneous detection of co-existing DA and UA in real human urine samples and the peak potential separation between DA and UA was found to be greatly associated with the synergistic effect originated from ZnO and CQDs. The limit of detection (LOD) of the electrode was analyzed, and compared with other commercially available electrodes. Thus, the ZnO/CQD electrode was used to detect DA and UA in real samples, such as Saccharomyces cerevisiae cells.

Graphene and gold nanoparticle-based bionanocomposite for the voltammetric determination of bisphenol A in (micro)plastics

The monitoring of endocrine disruptors in the environment is one of the main strategies in the investigation of potential risks associated with exposure to these chemicals. Bisphenol A is one of the most prevalent endocrine-disrupting compounds and is prone to leaching out from polycarbonate plastic in both freshwater and marine environments. Additionally, microplastics also can leach out bisphenol A during their fragmentation in the water environment. In the quest for a highly sensitive sensor to determine bisphenol A in different matrices, an innovative bionanocomposite material has been achieved. This material is composed of gold nanoparticles and graphene, and was synthesized using a green approach that utilized guava (Psidium guajava) extract for reduction, stabilization, and dispersion purposes. Transmission electron microscopy images revealed well-spread gold nanoparticles with an average diameter of 31 nm on laminated graphene sheets in the composite material. An electrochemical sensor was developed by depositing the bionanocomposite onto a glassy carbon surface, which displayed remarkable responsiveness towards bisphenol A. Experimental conditions such as the amount of graphene, extract: water ratio of bionanocomposite and pH of the supporting electrolyte were optimized to improve the electrochemical performance. The modified electrode displayed a marked improvement in current responses for the oxidation of bisphenol A as compared to the uncovered glassy carbon electrode. A calibration plot was established for bisphenol A in 0.1 mol L^-1 Britton-Robinson buffer (pH 4.0), and the detection limit was determined to equal to 15.0 nmol L^-1. Recovery data from 92 to 109% were obtained in (micro)plastics samples using the electrochemical sensor and were compared with UV-vis spectrometry, demonstrating its successful application with accurate responses.

In-Situ Construction Molecular Imprinting Electrocatalyst of Au-MoO3/Graphene for Bisphenol A Determination with Long-Term Stability

Molecular imprinting (MI) technology has been used in electrochemical analysis technology because of its unique selectivity and specificity. In this work, an electrochemical sensor based on in-situ inorganic MI-Au-MoO3/graphene for bisphenol A (BPA) analysis is designed, where MI-MoO3 is hybridized with graphene nanosheets and Au nanoparticles, and BPA is acted as the temple molecular. Differential pulse voltammetry (DPV) was used to evaluate the sensing performance of the MI-Au-MoO3/rGO sensor toward BPA determination and it is about 2.0 times that of NI-Au-MoO3/rGO. The as-constructed sensor presents a wide linear range from 0.01 to 106.04 μM and a low limit of detection of 0.003 μM. It also displays outstanding stability and repeatability up to 20 days, and can be used to analyze the content of BPA in dust leachate and plastic bottle. This sensor offers a promising strategy for environment pollution and food analysis via MI technology.

Understanding the endocrine disruptor and determination of bisphenol A by functional Cu-BTABB-MOF/rGO composite as facile rapid electrochemical sensor: an experimental and DFT investigation

A pioneering CuBTABB-MOF/rGO composite customized electrode is fabricated and utilized as a sensor towards identifying bisphenol A (BPA) in a phosphate buffer solution of pH 7.0. The composite is characterized by FTIR, Raman spectroscopy, XRD, SEM, EDX, HRTEM, and XPS to study its structural and morphological properties. Compared with Cu-BTABB-MOF and Cu-BTABB-MOF@GO, the Cu-BTABB-MOF@rGO modified electrode is more sensitive and selective to BPA due to a strong interaction between them. The developed Cu-BTABB-MOF@rGO modified electrode exhibits good sensitivity (6.95 × 10^-5 A mol^-1 L^-1) for BPA having a wide linear range of 0-100 μmol L^-1 with the LOD of 2.08 × 10^-5 mol L^-1, reproducibility of 4.35%, and relative standard deviation (RSD) and stability of 90% for thirty days. In addition, the developed electrocatalyst remained unoccupied from interfering substances and consequently provided an encouraging platform for swift detection of BPA in real samples such as pond water and packed water bottles. Additionally, we utilized DFT (density functional theory) to model GO and Cu-BTABB-MOF structures for detecting BPA molecules.

Pillar[6]arene-modified gold nanoparticles grafted on cellulose nanocrystals for the electrochemical detection of bisphenol A

The as-prepared CNCs@CP6-AuNP nanohybrid and its application in sensing BPA.

A non-mercury electrode for the voltammetric determination of butralin in foods

A modified electrode was developed with Co-Ag bimetallic nanoparticles stabilized in poly(vinylpyrrolidone) for butralin monitoring. This is the first non-mercury electrode proposed for the quantification of butralin. The bimetallic nanoparticles were characterized by spectroscopic and microscopic techniques, which showed that they are composed of a cobalt core partially covered with silver. The modified electrode was characterized by field emission gun scanning electron microscopy, energy dispersive X-ray spectroscopy and electrochemical impedance spectroscopy. The experimental parameters (pH, supporting electrolyte, accumulation step, pulse technique) were optimized. The calibration plot for butralin obtained by square wave voltammetry was linear in the range of 0.1-1.0 μmol L^-1 with limits of detection and quantification of 32 and 106 nmol L^-1, respectively. Lastly, the modified electrode was effectively implemented in the quantification of butralin in honey and apple jam samples. The results were in agreement with those furnished by UV-vis spectrometry and endorsed by statistical tests.

Development of a new bisphenol A electrochemical sensor based on a cadmium(ii) porphyrin modified carbon paste electrode

In this study, the (5,10,15,20-tetrakis[(4-methoxyphenyl)]porphyrinato)cadmium(ii) complex ([Cd(TMPP)]) was successfully used as a modifier in a carbon paste electrode (CPE) and exploited for bisphenol A (BPA) detection. Analytical performance revealed two linear ranges from 0.0015-15 μM and 0.015-1.5 mM with a detection limit of 13.5 pM. The proposed method was implemented in water samples, which resulted in quantitative signals over the range 6.5-1000 μM with recoveries between 92.6 and 107.7% for tap water and between 96.6 to 106.0% for mineral water.