The electric regulation mechanism of drug molecules intercalating with DNA

The insertion of small drug molecules into DNA can change its electrical properties, thereby controlling the probability of its electrical transmission. This characteristic has enabled its widespread application in molecular electronics. However, the current understanding of the intercalation properties and electronic transmission mechanisms is still not deep enough, which severely restricts its practical application. In this paper, the density functional theory and the non-equilibrium Green's function formula are combined to bind three different small drug molecules to the same sequence of DNA through intercalation, in order to discuss the impact of intercalation and molecular structure on the electrical properties of DNA. After inserting two MAR70 molecules, the conductivity decreased from 2.38×10-5 G0 to 3.37×10-7 G0 . Upon the insertion of Nogalamycin, the conductivity dropped to 2.01×10-5 G0, only slightly lower than that of bare B-DNA. However, when cyanomorpholinodoxorubicin was inserted, the conductivity was 2.65×10-6 G0. In our study, we observed some common characteristics. After intercalating with drug molecules, new energy levels were induced, altering the positions of the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) energy levels, resulting in a narrowed bandgap and consequently reduced conductivity of the complex. Furthermore, the conductivity was also related to the number of inserted drug molecules, fewer inserted molecules led to a decrease in conductivity. The results of this study indicate that embedding drug molecules can reduce or regulate the conductivity of DNA, providing new insights for its application in the field of nanoelectronics.

Quantification of mirtazapine in tablets via DNA binding mechanism; development of a new HPLC method

Atypical antidepressant mirtazapine (MIR) is mostly prescribed for the management of major depressive disorder. The identification of MIR in pharmaceutical dosage forms was made possible by developing a novel, quick, sensitive high-performance liquid chromatography (HPLC) approach that was verified in accordance with ICH recommendations. In the first part of this study, HPLC investigations were optimized with regard to variables including pH, working column, mobile phase, temperature, and flow rate. The limit of detection (LOD) was 0.013 ppm, the limit of quantification (LOQ) was 0.044 ppm, and the linear range was computed as 0.5-15 ppm (R2 = 0.9998). The recovery investigation assessed the method's accuracy, which was shown to range between 98.82 and 100.97 %. In the second part, by using UV-vis spectroscopy, HPLC, thermal denaturation, and viscosity measurements, the mechanism of binding interaction of MIR with double-stranded fish sperm deoxyribonucleic acid (dsDNA) has been thoroughly studied. The DNA binding constants (Kb) were determined using UV-Vis absorption and HPLC methods. To investigate the interactions of MIR with dsDNA, molecular docking calculations and additionally, molecular dynamics simulations were performed. Results showed that MIR is located in the minor groove of dsDNA, and in addition to hydrogen bonding, electrostatic interaction is also formed between the aromatic ring of MIR and phosphate oxygen of dsDNA. Finally, a binding characterization study using MIR tablets was also conducted in order to assess the interaction mechanism of the DNA with the drug using the validated analytical procedure developed for the MIR molecule.

Intercalative binding of two new five-coordinated anticancer Pt(II) complexes to DNA: experimental and computational approaches

Binding interaction of two organoplatinum complexes, [Pt(C^N)Cl(dppa)], 1, and [Pt(C^N)Cl(dppm)], 2, (C^N = N(1), C(2')-chelated, deprotonated 2-phenylpyridine, dppa = bis(diphenylphosphino)amine, dppm = bis(diphenylphosphino)methane), as anti-tumor agents, with calf thymus DNA (CT-DNA) under pseudo-physiological conditions has been investigated using various biophysical techniques viz., UV-Vis and fluorescence spectroscopies, viscosity measurements, and thermal denaturation experiments. A hypochromic shift in UV-Vis absorption titration, fluorescence enhancement of Pt(II) complexes in the presence of CT-DNA, fluorescence quenching in competitive ethidium bromide displacement assay, and an uptrend in the viscosity (η) and melting temperature (Tm) indicated the existence of a tight intercalative interaction of Pt(II) complexes with CT-DNA. The fluorescence quenching of CT-DNA was a combined quenching of static and dynamic with Stern-Volmer quenching constants of 7.520 × 103 M-1 for complex 1 and 5.183 × 103 M-1 for complex 2, at low concentrations of Pt(II) complexes. Besides the experimental studies, computational studies were done. Molecular modeling studies confirmed the intercalation of the studied complexes by the phenyl groups of dppa and dppm, leading to π-π interactions but with a certain steric hindrance because of the size and shape of the considered complexes. The combination of experimental and computational data showed that reported Pt(II) complexes are promising structures and could be developed for cancer therapeutic applications.Communicated by Ramaswamy H. Sarma.

Electrochemical DNA biosensors developed for the monitoring of biointeractions with drugs: a review

The interaction of drugs with DNA is important for the discovery of novel drug molecules and for understanding the therapeutic effects of drugs as well as the monitoring of side effects. For this reason, many studies have been carried out to investigate the interactions of drugs with nucleic acids. In recent years, a large number of studies have been performed to electrochemically detect drug-DNA interactions. The fast, sensitive, and accurate results of electrochemical techniques have resulted in a leading role for their implementation in this field. By means of electrochemical techniques, it is possible not only to demonstrate drug-DNA interactions but also to quantitatively analyze drugs. In this context, electrochemical biosensors for drug-DNA interactions have been examined under different headings including anticancer, antiviral, antibiotic, and central nervous system drugs as well as DNA-targeted drugs. An overview of the studies related to electrochemical DNA biosensors developed for the detection of drug-DNA interactions that were reported in the last two decades in the literature is presented herein along with their applications and they are discussed together with their future perspectives.

Unveiling the tartrazine binding mode with ds-DNA by UV-visible spectroscopy, electrochemical, and QM/MM methods

Here, we studied the interaction between the food colorant tartrazine (TZ) and double stranded DNA (dsDNA), using spectroscopic, electrochemical, and computational methods such as QM/MM combined with TD-DFT. Despite the UV-vis spectroscopy is widely used to study the interaction between molecules, for the case of TZ there are discrepancies in the analyses presented in the literature available, presenting both hyperchromic and hypochromic effects and consequently different rationalizations for their results. Herein we propose the combination of UV-vis experiments with the design of high-level computational models capable of reproducing the experimental behavior to finally define the proper binding mode at the molecular scale together with the rationalization of the experimental optical response due to the complex formation. To complement the UV-vis experiments, we propose the use of electrochemical measurements, to support the results obtained through UV-vis spectroscopy, as it has been successfully used for the determination of interaction modes between small molecules and biomolecules in any condition. Our UV-vis spectroscopy experiments showed only a hypochromic effect of the absorption spectra of TZ after interaction with DNA, indicative of TZ being deeply buried in the DNA structure. The effect of ionic strength in the experimental procedures led to the dissociation of TZ, thus indicating that the interaction mode was groove binding. On the other hand, the electrochemical studies showed an irreversible reduction peak of TZ, which after the interaction with DNA exhibited a positive shift in potential that can be attributed to groove binding. The binding constant for TZ-DNA was calculated as 4.45x10⁴M^-1 (UV-vis) and 5.75x10⁴M^-1 (electrochemistry), in line with other groove binder azo dyes. Finally, through the QM/MM calculations we found that the minor-groove binding mode interacting in zones rich in adenine and thymine was the model best suited to reproduce the experimental UV-vis response.

Candidate drug molecule-DNA interaction and molecular modelling of candidate drug molecule

Aim: 1,4-dihydropyridine derivative, 1-(3-phenyl propyl)-4-(2-(2-hydroxybenzylidene) hydrazone)-1,4-dihydropyridine (abbreviated as DHP) was synthesized as potential agent for Alzheimer’s disease which is a progressive neurodegenerative brain disorder affecting millions of elderly people. With this study, the electrochemical properties of DHP were investigated and its interaction with DNA was analyzed by differential pulse voltammetry (DPV) and cyclic voltammetry (CV) measurements. In addition, this study aims to determine degradation mechanism of the DHP molecule by Density-functional theory (DFT) in gas and in aqueous phase. Material and Method: Experimental conditions such as immobilization time, the effect of the scan rate, concentration, and the effect of pH were optimized. The method was validated according to validation parameters such as range, precision, linearity, limit of detection (LOD), limit of quantitation (LOQ) and inter/intraday. Results: Linearity study for the calibration curve of DNA and DHP with DPV was calculated in the calibration range 10-100 µg/mL. The LOD and LOQ values were calculated as 3 and 10 µg/mL and intra-day and inter-day repeatability (RSD %) were 1.85 and 3.64 µg/mL, respectively. After the DHP-DNA interaction, the oxidation currents of guanine decreased as a proof of interaction. The activation energy of the most possible path of reaction was calculated, and their thermodynamically most stable state was determined in gas phase. Conclusion: We developed to improve a sensitive, fast and easy detection process for determination of interaction between DHP and DNA.

Electrochemical Sensing of Idarubicin—DNA Interaction Using Electropolymerized Azure B and Methylene Blue Mediation

A highly sensitive electrochemical DNA sensor for detection of the chemotherapeutic drug idarubicin mediated by Methylene blue (MB) has been developed. DNA from fish sperm has been immobilized at the electropolymerized layers of Azure B. The incorporation of MB into the DNA layers substantially increased the sensor sensitivity. The concentration range for idarubicin determination by cyclic voltammetry was from 1 fM to 0.1 nM, with a limit of detection (LOD) of 0.3 fM. Electrochemical impedance spectroscopy (EIS) in the presence of a redox probe ([Fe(CN)6]3−/4−) allowed for the widening of a linear range of idarubicin detection from 1 fM to 100 nM, retaining LOD 0.3 fM. The DNA sensor has been tested in various real and artificial biological fluids with good recovery ranging between 90–110%. The sensor has been successfully used for impedimetric idarubicin detection in medical preparation Zavedos®. The developed DNA biosensor could be useful for the control of the level of idarubicin during cancer therapy as well as for pharmacokinetics studies.

Electrochemical DNA Sensor Based on Acridine Yellow Adsorbed on Glassy Carbon Electrode

Electrochemical DNA sensors offer unique opportunities for the sensitive detection of specific DNA interactions. In this work, a voltametric DNA sensor is proposed on the base of glassy carbon electrode modified with carbon black, adsorbed acridine yellow and DNA for highly sensitive determination of doxorubicin antitumor drug. The signal recorded by cyclic voltammetry was attributed to irreversible oxidation of the dye. Its value was altered by aggregation of the hydrophobic dye molecules on the carbon black particles. DNA molecules promote disaggregation of the dye and increased the signal. This effect was partially suppressed by doxorubicin compensate for the charge of DNA in the intercalation. Sensitivity of the signal toward DNA and doxorubicin was additionally increased by treatment of the layer with dimethylformamide. In optimal conditions, the linear range of doxorubicin concentrations determined was 0.1 pM–1.0 nM, and the detection limit was 0.07 pM. No influence of sulfonamide medicines and plasma electrolytes on the doxorubicin determination was shown. The DNA sensor was tested on two medications (doxorubicin-TEVA and doxorubicin-LANS) and showed recoveries of 102–105%. The DNA sensor developed can find applications in the determination of drug residues in blood and for the pharmacokinetics studies.

Electrochemical DNA Sensor Based on Poly(Azure A) Obtained from the Buffer Saturated with Chloroform

Electropolymerized redox polymers offer broad opportunities in detection of biospecific interactions of DNA. In this work, Azure A was electrochemically polymerized by multiple cycling of the potential in phosphate buffer saturated with chloroform and applied for discrimination of the DNA damage. The influence of organic solvent on electrochemical properties of the coating was quantified and conditions for implementation of DNA in the growing polymer film were assessed using cyclic voltammetry, quartz crystal microbalance, and electrochemical impedance spectroscopy. As shown, both chloroform and DNA affected the morphology of the polymer surface and electropolymerization efficiency. The electrochemical DNA sensor developed made it possible to distinguish native and thermally and chemically damaged DNA by changes in the charge transfer resistance and capacitance.

Fine-tuning the DNA conductance by intercalation of drug molecules

In this work we study the structure-transport property relationships of small ligand intercalated DNA molecules using a multiscale modeling approach where extensive ab initio calculations are performed on numerous MD-simulated configurations of dsDNA and dsDNA intercalated with two different intercalators, ethidium and daunomycin. DNA conductance is found to increase by one order of magnitude upon drug intercalation due to the local unwinding of the DNA base pairs adjacent to the intercalated sites, which leads to modifications of the density of states in the near-Fermi-energy region of the ligand-DNA complex. Our study suggests that the intercalators can be used to enhance or tune the DNA conductance, which opens new possibilities for their potential applications in nanoelectronics.