Concentration polarization and nonequilibrium electroosmotic slip in hierarchical monolithic structures

A numerical study on ion concentration polarization and electric circuit performance of an electrokinetic battery

Ion concentration polarization (ICP) imposes remarkable adverse effects on the energy conversion performance of the pressure-driven electrokinetic (EK) flows through a capillary system that can be equivalently treated as a battery. An optimized dimensionless numerical method is proposed in this study to investigate the causes and the effects of the ICP. Results show that remarkable ICP phenomena are induced under certain conditions such as high applied pressure, high surface charge density, and small inversed Debye length at dimensionless values of 6000, -10, and 0.5. Meanwhile, different factors influence the ICP and the corresponding electric properties in different ways. Particularly for the overall electric resistance, the applied pressure and the surface charge density mainly affect the variation amplitude and the level of the overall electric resistance when varying the output electric potential, respectively. Differently, the Debye length affects the overall electric resistance in both aspects. Ultimately, the induced ICP leads to significant nonlinear current-potential curves.

Ion concentration polarization near microchannel-nanochannel interfaces: effect of pH value

This study investigates the effect of the pH value on the ion concentration polarization phenomenon and the nonlinear current-voltage characteristics of a hybrid soda-lime glass micro/nanochannel for a constant KCl salt concentration of about 1 mM. The experimental results show that the electrical conductance of the nanochannel in the Ohmic regime and the critical threshold voltage of the limiting current are both dependent on the pH value of the salt solution when the electrical double layer thickness is considerable in the nanochannel. Specifically, the nanochannel conductance increases and the critical threshold voltage for the limiting current decreases as the pH value is increased. It also suggests that a higher pH value induces a higher surface charge density on the nanochannel walls, and therefore increases both the ionic conductance and the counter-ion flux within the nanochannel.