Validated numerical fluid simulation of a thin-layer cascade photobioreactor in OpenFOAM

Degradation of Polymethylmethacrylate (PMMA) Bioreactors Used for Algal Cultivation

This paper depicts characteristics of degradation of walls of bioreactors made of polymethylmethacrylate (PMMA) which was used to culture algae. The degradation processes take place stimulated by lighting of external surface and interaction with cultured species on internal surface. Results presented are representative for degradation of a bioreactor tube after the 4-year cultivation of Chlorella sp. Microscopic observations, roughness and transmission tests showed that changes have occurred on the inner surface. The result of use is a decrease in transmission and an increase in roughness. Microscopic observations showed that particles remained after culture, especially in cracks.

Continuous Production of Lipids with Microchloropsis salina in Open Thin-Layer Cascade Photobioreactors on a Pilot Scale

Studies on microalgal lipid production as a sustainable feedstock for biofuels and chemicals are scarce, particularly those on applying open thin-layer cascade (TLC) photobioreactors under dynamic diurnal conditions. Continuous lipid production with Microchloropsis salina was studied in scalable TLC photobioreactors at 50 m2 pilot scale, applying a physically simulated Mediterranean summer climate. A cascade of two serially connected TLC reactors was applied, promoting biomass growth under nutrient-replete conditions in the first reactor, while inducing the accumulation of lipids via nitrogen limitation in the second reactor. Up to 4.1 g L−1 of lipids were continuously produced at productivities of up to 0.27 g L−1 d−1 (1.8 g m2 d−1) at a mean hydraulic residence time of 2.5 d in the first reactor and 20 d in the second reactor. Coupling mass balances with the kinetics of microalgal growth and lipid formation enabled the simulation of phototrophic process performances of M. salina in TLC reactors in batch and continuous operation at the climate conditions studied. This study demonstrates the scalability of continuous microalgal lipid production in TLC reactors with M. salina and provides a TLC reactor model for the realistic simulation of microalgae lipid production processes after re-identification of the model parameters if other microalgae and/or varying climate conditions are applied.

High-Density Microalgae Cultivation in Open Thin-Layer Cascade Photobioreactors with Water Recycling

(1) Background: Recycling of water and non-converted nutrients is considered to be a necessity for an economically viable production of microalgal biomass as a renewable feedstock. However, medium recycling might also have a negative impact on algal growth and productivity due to the accumulation of growth-inhibiting substances. (2) Methods: Consecutive batch processes with repeated water recycling after harvesting of algal biomass were performed with the saline microalga Microchloropsis salina in open thin-layer cascade photobioreactors operated at a physically simulated Mediterranean summer climate. The impact of water recycling on culture performance was studied and the composition of the recycled water was analyzed. (3) Results: Water recycling had no adverse effect on microalgal growth and biomass productivity (14.9−21.3 g m−2 d−1) if all necessary nutrients were regularly replenished and KNO3 was replaced by urea as the nitrogen source to prevent the accumulation of K+ ions. Dissolved organic carbon accumulated in recycled water, probably promoting mixotrophic growth. (4) Conclusion: This study shows that repeated recycling of water is feasible even in high-density cultivation processes with M. salina of more than 30 g L−1 cell dry weight, increasing culture performance while reducing nutrient consumption and circumventing wastewater production.

Production of lipids with Microchloropsis salina in open thin-layer cascade photobioreactors

Microalgal biomass is considered as the most promising feedstock for sustainable production of liquid fuels. Lipid production with Microchloropsis salina was studied in open thin-layer cascade (TLC) photobioreactors with a surface area of 8 m² applying a physically simulated Mediterranean summer climate. High lipid concentrations of up to 6.6 g L^-1 with 46% (w w^-1) total lipids in dry cell mass were achieved in two-phase batch processes applying a nitrogen limitation. The two-phase batch process was transferred into a continuously operated reactor cascade of two TLC photobioreactors. Microchloropsis salina cells were produced continuously in the first photobioreactor, whereas continuous lipid production was enabled in the second, nitrogen-limited TLC photobioreactor resulting in continuous production of 3.0 g L^-1 lipids with a high overall lipid space-time-yield of 0.2 g L^-1 d^-1. The control of alkalinity to about 10 mM resulted in high CO₂ conversion efficiencies of 84-87%.