Root Canal Shaping Using Rotary Nickel-Titanium Files in Preclinical Dental Education in Turkey

The landscape of endodontic education research area: A bibliometric analysis

OBJECTIVES

Educational research is essential for rationalizing curriculum design, improving evaluation systems, and updating teaching content. This bibliometric study aimed at analyzing the characteristics of publications relevant to endodontic education, thus forming a comprehensive scope of this research area.

METHODS

The search was conducted in the Web of Science Core Collection database in May 2022. Knowledge units of the included publications, such as year of publication, journal, country/institution/author, keywords, and highly cited articles/references, were analyzed.

RESULTS

The United States ranked first in the number of articles with a total of 17 articles. The majority of included articles were published in Journal of Dental Education (n = 25), International Endodontic Journal (n = 21), and European Journal of Dental Education (n = 14). The top 3 most frequent keywords were Endodontics, Education, and Root canal treatment. The main topic in endodontic education were curriculum, preclinical education, educational technology, and continuing education.

CONCLUSION

Forming a full scope of the endodontic research area, this bibliomertic analysis can help mine the hot topic, predict the frontiers in the field and provide the data necessary to determine the direction of research, rationalize resource allocation, and formulate policy.

Assessment of Nitrofurantoin as an Experimental Intracanal Medicament in Endodontics

Background and Objectives. Multiple antibacterial agents have been mixed and used as an intracanal medicament-like modified triple antibiotic paste (MTAP) to eliminate Enterococcus faecalis (EF), which has been most frequently identified in the cases of failed root canal treatment and periapical lesions. This study is aimed at using a single antibacterial agent, nitrofurantoin (Nit), as an experimental intracanal medicament paste against different clinical isolates of EF), which has been most frequently identified in the cases of failed root canal treatment and periapical lesions. This study is aimed at using a single antibacterial agent, nitrofurantoin (Nit), as an experimental intracanal medicament paste against different clinical isolates of Materials and Methods. Three strains of EF), which has been most frequently identified in the cases of failed root canal treatment and periapical lesions. This study is aimed at using a single antibacterial agent, nitrofurantoin (Nit), as an experimental intracanal medicament paste against different clinical isolates of n = 90), group M (MTAP) (n = 90), group M (MTAP) (n = 90), group M (MTAP) (EF), which has been most frequently identified in the cases of failed root canal treatment and periapical lesions. This study is aimed at using a single antibacterial agent, nitrofurantoin (Nit), as an experimental intracanal medicament paste against different clinical isolates of n = 90), group M (MTAP) (n = 90), group M (MTAP) (n = 90), group M (MTAP) (EF), which has been most frequently identified in the cases of failed root canal treatment and periapical lesions. This study is aimed at using a single antibacterial agent, nitrofurantoin (Nit), as an experimental intracanal medicament paste against different clinical isolates of

A comparative study of root canal shaping using protaper universal and protaper next rotary files in preclinical dental education

Background

Dentistry has undergone an evolution in endodontics practice caused by the advancement of rotary techniques for root canal preparation and their subsequent incorporation into the teaching of dentistry undergraduates. This research aimed to evaluate the shaping ability of third-year dental students as their first experience in rotary instrumentation using ProTaper Universal (PTU) and ProTaper Next (PTN) (Dentsply Maillefer) rotary instruments in simulated curved canals.

Methods

Forty students instrumented 200 simulated canals with a 40° curvature in resin blocks according to the manufacturer’s instructions with PTU and 39 students and 195 canals with PTN files. The canals were prepared at a speed of 300 rpm using a 16:1 reduction hand-piece powered by an electric motor (Xsmart; Dentsply Maillefer). The final apical preparation was set to F2 for the PTU and X2 for the PTN group. The change in canal curvature was evaluated based on Schneider technique using the AutoCAD 2007 software on post-digital photographs. The incidence of instrument fracture and deformation, the incidence of ledge, the change in working length (WL), and the working time were noted. The data were analyzed with Student’s t-test and Chi-Square test at a significance level of 0.05 using SPSS.

Results

PTN maintained the original canal curvature better, resulting in fewer fractures and ledges, and shaped the canals faster than the PTU (P < 0.05). The mean curves of the resin canals after the instrumentation for the PTU and PTN groups were 24.03° ± 3.14° and 25.64° ± 2.72°, respectively. Thirty-three (17.4%) PTU and 18 (9.3%) PTN files fractured (p < 0.05). Nine (4.5%) PTU and 2 (2.6%) PTN deformed (p > 0.05). The change in WL after instrumentation was 0.97 mm ± 0.95 mm in PTU and 0.96 mm ± 0.80 mm in PTN (p < 0.05). The mean times were 627 s ± 18 s for PTU and 379 s ± 18 s for PTN (p < 0.000).

Discussion

PTN can be recommended in severely curved root canals in terms of maintenance of the original canal curvature, superior instrument fracture and fewer ledges. Even if training before preparation provides an acceptable level of canal shaping for preclinical students, the use of NiTi rotary instruments should be included in the undergraduate dental curriculum, contributing to an increase in the quality of root canal shaping and, consequently, to an improvement of the clinical experience of students.

Mechanical Properties of Various Glide Path Preparation Nickel-titanium Rotary Instruments

INTRODUCTION

The aim of this study was to compare the cyclic fatigue, torsional resistance, and bending stiffness of single-file glide path preparation nickel-titanium instruments.

METHODS

ProGlider (#16/progressive taper; Dentsply Sirona, Ballaigues, Switzerland), One G (#14/.03; Micro-Mega, Besancon, France), and EdgeGlidePath (#16/progressive taper; Edge Endo, Albuquerque, NM) were tested. For the bending stiffness test, the instrument was bent to a 45° angle along the main axis while 3 mm of the tip was secured. Cyclic fatigue resistance was measured during pecking movement, whereas the file was rotated within a reproducible simulated canal with a 3-mm radius and a 90° angle of curvature. The ultimate torsional strength and toughness were evaluated using a custom device. While tightly holding the end of the file at 3 mm, a rotational load of 2 rpm speed was applied until fracture. The results were analyzed using 1-way analysis of variance and Tukey post hoc comparison. A microscopic inspection was performed on the surface of a separate instrument using a scanning electron microscope.

RESULTS

EdgeGlidePath showed superior cyclic fatigue resistance compared with the other systems. One G showed higher maximum torsional strength than the others. One G showed the largest distortion angle and the highest toughness followed by EdgeGlidePath and ProGlider (P < .05). One G also showed larger bending stiffness than the others, whereas EdgeGlidePath showed a larger residual angle than the others (P < .05).

CONCLUSIONS

Conventional wire showed higher toughness and torsional resistance than M-Wire and heat-treated nickel-titanium instruments. However, heat-treated wire showed higher cyclic resistance than conventional wire and M-Wire.

Satisfaction of undergraduate students at University of Jordan after root canal treatment of posterior teeth using rotary or hand preparation

The aim of this study was to report the satisfaction of fifth year undergraduate students on the clinical use of rotary endodontic preparation compared with stainless steel standard technique and to evaluate the impact of rotary nickel-titanium instruments on undergraduate teaching. This study was carried out by the fifth year undergraduate students attending peer review sessions as a part of their training program using a questionnaire to assess their satisfaction with these two techniques. The overall results indicated a statistically significant satisfaction of the undergraduate students with the use of the nickel-titanium system (P < 0.001) compared to stainless steel standard technique. Under the conditions of this study, the results showed a positive acceptance and consensus among novice dental students regarding the use of ProTaper rotary files and the need for undergraduate teaching of rotary nickel-titanium systems in Jordan.

Technical quality of root canal treatment of posterior teeth after rotary or hand preparation by fifth year undergraduate students, The University of Jordan

The aim of this study was to investigate the technical quality of root canal treatment provided by the undergraduate students as their first experience in molar endodontics using nickel-titanium (NiTi) files in a crown-down approach compared with stainless steel standard technique. This study was carried out by the fifth year undergraduate students attending peer review sessions as a part of their training programme, using two different questionnaires to assess the overall technical quality and potential problems regarding endodontic complications after root canal preparation with these two techniques. The overall results indicated a statistically significant difference in the performance of the two instrument techniques in difficult cases showing better performance of the NiTi system and mean rotary preparation time (P < 0.001). Under the conditions of this study, novice dental students, using NiTi ProTaper rotary files, were able to prepare root canals faster with more preparation accuracy compared with canals of same teeth prepared with hand instruments.

Apical transportation associated with ProTaper Universal F1, F2 and F3 instruments in curved canals prepared by undergraduate students

Objective

This study evaluated apical transportation associated with ProTaper^® Universal Fl, F2 and F3 rotary files in curved canais prepared by undergraduate students.

Material and Methods

Twenty mesial roots of mandibular molars with curvatures ranging between 25° and 35° were selected. Mesiobuccal canals were instrumented by twenty students with the ProTaper^® system (Dentsply-Maillefer, Ballaigues, Switzerland) according to the manufacturer's instructions. Pre-fiaring was performed with Sl and SX files. A #15 K-file was inserted into the root canal up to the working length (WL), and an initial digital radiograph was taken in a buccolingual direction (baseline). Afterwards, the S1, S2, F1, F2, and F3 files were employed up to the WL. Other radiographies were taken in the same orientation of the baseline after the use of the Fl, F2, and F3 files, with each file inserted into the root canal. The radiographic images were overlapped, and the Image J software was used to measure the distance between the rotary files' ends and the #15 K-file's end, characterizing the apical transportation. Data were analyzed by Repeated Measure ANOVA and by the SNK post hoc test (P<0.05).

Results

It was verified that file size affected apical transportation significantly (P<0.001). The F3 file showed higher apical transportation than Fl and F2, while between these last files there was no difference.

Conclusion

The undergraduate students produced lower apical transportation in curved canals when they did not use the F3 rotary file.

Influence of operator's experience on root canal shaping ability with a rotary nickel-titanium single-file reciprocating motion system

INTRODUCTION

The aim of this study was to evaluate the influence of the operator's experience on the shaping of double-curvature simulated root canals with a nickel-titanium single-file reciprocating motion system.

METHODS

Sixty double-curvature root canals simulated in methacrylate blocks were prepared by 10 students without any experience in endodontics and by 10 professionals who had studied endodontics at the postgraduate level. The Reciproc-VDW system's R25 file was used in the root canal preparation. The blocks were photographed before and after the instrumentation, and the time of instrumentation was also evaluated. Changes in root canal dimensions were analyzed in 6 positions.

RESULTS

Significant differences (P < .05) were found in the apical transport of the first root canal curvature, with a larger percentage of increase of the root canal occurring in the novice group than in the expert one, as well as in the canal deviation at the beginning of the curvatures, whereas no significant results were obtained in the growth rate of the canal area. There was difference in the time of instrumentation, with 3.76 minutes observed in the novice group, as opposed to 2.05 minutes in the expert group.

CONCLUSIONS

The use of the single-file reciprocating motion system Reciproc is not seen to be influenced by the operator's experience regarding the increase of the canal area. Previous training and the need to acquire experience are important in the use of this system, in spite of its apparent simplicity.