Development of an integrated optical analyzer for characterization of growth dynamics of bacterial colonies

Development of a Smartphone-Integrated Reflective Scatterometer for Bacterial Identification

We present a smartphone-based bacterial colony phenotyping instrument using a reflective elastic light scattering (ELS) pattern and the resolving power of the new instrument. The reflectance-type device can acquire ELS patterns of colonies on highly opaque media as well as optically dense colonies. The novel instrument was built using a smartphone interface and a 532 nm diode laser, and these essential optical components made it a cost-effective and portable device. When a coherent and collimated light source illuminated a bacterial colony, a reflective ELS pattern was created on the screen and captured by the smartphone camera. The collected patterns whose shapes were determined by the colony morphology were then processed and analyzed to extract distinctive features for bacterial identification. For validation purposes, the reflective ELS patterns of five bacteria grown on opaque growth media were measured with the proposed instrument and utilized for the classification. Cross-validation was performed to evaluate the classification, and the result showed an accuracy above 94% for differentiating colonies of E. coli, K. pneumoniae, L. innocua, S. enteritidis, and S. aureus.

Optical multi-channel interrogation instrument for bacterial colony characterization

A single instrument that includes multiple optical channels was developed to simultaneously measure various optical and associated biophysical characteristics of a bacterial colony. The multi-channel device can provide five distinct optical features without the need to transfer the sample to multiple locations or instruments. The available measurement channels are bright-field light microscopy, 3-D colony-morphology map, 2-D spatial optical-density distribution, spectral forward-scattering pattern, and spectral optical density. The series of multiple morphological interrogations is beneficial in understanding the bio-optical features of a bacterial colony and the correlations among them, resulting in an enhanced power of phenotypic bacterial discrimination. To enable a one-shot interrogation, a confocal laser scanning module was built as an add-on to an upright microscope. Three different-wavelength diode lasers were used for the spectral analysis, and high-speed pin photodiodes and CMOS sensors were utilized as detectors to measure the spectral OD and light-scatter pattern. The proposed instrument and algorithms were evaluated with four bacterial genera, Escherichia coli, Listeria innocua, Salmonella Typhimurium, and Staphylococcus aureus; their resulting data provided a more complete picture of the optical characterization of bacterial colonies.

Generalized spectral light scatter models of diverse bacterial colony morphologies

An optical forward-scatter model was generalized to encompass the diverse nature of bacterial colony morphologies and the spectral information. According to the model, the colony shape and the wavelength of incident light significantly affect the characteristics of a forward elastic-light-scattering pattern. To study the relationship between the colony morphology and the scattering pattern, three-dimensional colony models were generated in various morphologies. The propagation of light passing through the colony model was then simulated. In validation of the theoretical modeling, the scattering patterns of three bacterial genera, Staphylococcus, Exiguobacterium and Bacillus, which grow into colonies having convex, crateriform and flat elevations, respectively, were qualitatively compared to the simulated scattering patterns. The strong correlations observed between simulated and experimental patterns validated the scatter model. In addition, spectral effect on the scattering pattern was studied using the scatter model, and experimentally investigated using Staphylococcus, whose colony has circular form and convex elevation. Both simulation and experiment showed that changes in wavelength affected the overall pattern size and the number of rings.

Integrated multi-channel optical system for bacteria characterization and its potential use for monitoring of environmental bacteria

The potential use of a novel multichannel optical system towards fast and non-destructive bacteria identification and its application for environmental bacteria characterisation on the strain level is presented. It is the first attempt to use the proposed optical method to study various bacteria species (Gram-negative, Gram-positive) commonly present in the environment. The novel configuration of the optical system enables multichannel examination of bacterial colonies and provides additional functionality such as registration of two-dimensional (2D) distribution of monochromatic transmission coefficient of examined colonies, what can be used as a novel optical signature for bacteria characterization. Performed statistical analysis indicates that it is possible to identify representatives of environmental soil bacteria on the species level with the 98.51% accuracy and in case of two strains of Rahnella aquatilis bacteria on the strain level with the 98.8% accuracy. The proposed method is an alternative to the currently used preliminary bacteria examination in environment safety control with the advantage of being fast, reliable, non-destructive and requiring minimal sample preparation.

Development of a multispectral light-scatter sensor for bacterial colonies

We report a multispectral elastic-light-scatter instrument that can simultaneously detect three-wavelength scatter patterns and associated optical densities from individual bacterial colonies, overcoming the limits of the single-wavelength predecessor. Absorption measurements on liquid bacterial samples revealed that the spectroscopic information can indeed contribute to sample differentiability. New optical components, including a pellicle beam splitter and an optical cage system, were utilized for robust acquisition of multispectral images. Four different genera and seven shiga toxin producing E. coli serovars were analyzed; the acquired images showed differences in scattering characteristics among the tested organisms. In addition, colony-based spectral optical-density information was also collected. The optical model, which was developed using diffraction theory, correctly predicted wavelength-related differences in scatter patterns, and was matched with the experimental results. Scatter-pattern classification was performed using pseudo-Zernike (GPZ) polynomials/moments by combining the features collected at all three wavelengths and selecting the best features via a random-forest method. The data demonstrate that the selected features provide better classification rates than the same number of features from any single wavelength. Three wavelength-merged scatter pattern from E. coli.

Virulence Gene-Associated Mutant Bacterial Colonies Generate Differentiating Two-Dimensional Laser Scatter Fingerprints

In this study, we investigated whether a laser scatterometer designated BARDOT (bacterial rapid detection using optical scattering technology) could be used to directly screen colonies of Listeria monocytogenes, a model pathogen, with mutations in several known virulence genes, including the genes encoding Listeria adhesion protein (LAP; lap mutant), internalin A (ΔinlA strain), and an accessory secretory protein (ΔsecA2 strain). Here we show that the scatter patterns of lap mutant, ΔinlA, and ΔsecA2 colonies were markedly different from that of the wild type (WT), with >95% positive predictive values (PPVs), whereas for the complemented mutant strains, scatter patterns were restored to that of the WT. The scatter image library successfully distinguished the lap mutant and ΔinlA mutant strains from the WT in mixed-culture experiments, including a coinfection study using the Caco-2 cell line. Among the biophysical parameters examined, the colony height and optical density did not reveal any discernible differences between the mutant and WT strains. We also found that differential LAP expression in L. monocytogenes serotype 4b strains also affected the scatter patterns of the colonies. The results from this study suggest that BARDOT can be used to screen and enumerate mutant strains separately from the WT based on differential colony scatter patterns.

IMPORTANCE

In studies of microbial pathogenesis, virulence-encoding genes are routinely disrupted by deletion or insertion to create mutant strains. Screening of mutant strains is an arduous process involving plating on selective growth media, replica plating, colony hybridization, DNA isolation, and PCR or immunoassays. We applied a noninvasive laser scatterometer to differentiate mutant bacterial colonies from WT colonies based on forward optical scatter patterns. This study demonstrates that BARDOT can be used as a novel, label-free, real-time tool to aid researchers in screening virulence gene-associated mutant colonies during microbial pathogenesis, coinfection, and genetic manipulation studies.

Scalar diffraction modeling of multispectral forward scatter patterns from bacterial colonies

A theoretical model for spectral forward scatter patterns from a bacterial colony based on elastic light scatter is presented. The spectral forward scatter patterns are computed by scalar diffraction theory, and compared with experimental results of three discrete wavelengths (405 nm, 635 nm, and 904 nm). To provide quantitative analysis, spectral dependence of diffraction ring width, gap, maxima, minima, and the first deflection point are monitored. Both model and experiment results show an excellent agreement; a longer wavelength induces a wider ring width, a wider ring gap, a smaller pattern size, and smaller numbers of rings. Further analysis using spatial fast Fourier transform (SFFT) shows a good agreement; the spatial frequencies are increasing towards the inward direction, and the slope is inversely proportional to the incoming wavelength.

Three-dimensional characterization of bacterial microcolonies on solid agar-based culture media

For the last century, in vitro diagnostic process in microbiology has mainly relied on the growth of bacteria on the surface of a solid agar medium. Nevertheless, few studies focused in the past on the dynamics of microcolonies growth on agar surface before 8 to 10h of incubation. In this article, chromatic confocal microscopy has been applied to characterize the early development of a bacterial colony. This technology relies on a differential focusing depth of the white light. It allows one to fully measure the tridimensional shape of microcolonies more quickly than classical confocal microscopy but with the same spatial resolution. Placing the device in an incubator, the method was able to individually track colonies growing on an agar plate, and to follow the evolution of their surface or volume. Using an appropriate statistical modeling framework, for a given microorganism, the doubling time has been estimated for each individual colony, as well as its variability between colonies, both within and between agar plates. A proof of concept led on four bacterial strains of four distinct species demonstrated the feasibility and the interest of the approach. It showed in particular that doubling times derived from early tri-dimensional measurements on microcolonies differed from classical measurements in micro-dilutions based on optical diffusion. Such a precise characterization of the tri-dimensional shape of microcolonies in their late-lag to early-exponential phase could be beneficial in terms of in vitro diagnostics. Indeed, real-time monitoring of the biomass available in a colony could allow to run well established microbial identification workflows like, for instance, MALDI-TOF mass-spectrometry, as soon as a sufficient quantity of material is available, thereby reducing the time needed to provide a diagnostic. Moreover, as done for pre-identification of macro-colonies, morphological indicators such as three-dimensional growth profiles derived from microcolonies could be used to perform a first pre-identification step, but in a shorten time.

Laser-induced speckle scatter patterns in Bacillus colonies

Label-free bacterial colony phenotyping technology called BARDOT (Bacterial Rapid Detection using Optical scattering Technology) provided successful classification of several different bacteria at the genus, species, and serovar level. Recent experiments with colonies of Bacillus species provided strikingly different characteristics of elastic light scatter (ELS) patterns, which were comprised of random speckles compared to other bacteria, which are dominated by concentric rings and spokes. Since this laser-based optical sensor interrogates the whole volume of the colony, 3-D information of micro- and macro-structures are all encoded in the far-field scatter patterns. Here, we present a theoretical model explaining the underlying mechanism of the speckle formation by the colonies from Bacillus species. Except for Bacillus polymyxa, all Bacillus spp. produced random bright spots on the imaging plane, which presumably dependent on the cellular and molecular organization and content within the colony. Our scatter model-based analysis revealed that colony spread resulting in variable surface roughness can modify the wavefront of the scatter field. As the center diameter of the Bacillus spp. colony grew from 500 to 900 μm, average speckles area decreased two-fold and the number of small speckles increased seven-fold. In conclusion, as Bacillus colony grows, the average speckle size in the scatter pattern decreases and the number of smaller speckle increases due to the swarming growth characteristics of bacteria within the colony.