Bacteriochlorin-bis(spermine) conjugate affords an effective photodynamic action to eradicate microorganisms

Photodynamic Therapy: From the Basics to the Current Progress of N-Heterocyclic-Bearing Dyes as Effective Photosensitizers

Photodynamic therapy, an alternative that has gained weight and popularity compared to current conventional therapies in the treatment of cancer, is a minimally invasive therapeutic strategy that generally results from the simultaneous action of three factors: a molecule with high sensitivity to light, the photosensitizer, molecular oxygen in the triplet state, and light energy. There is much to be said about each of these three elements; however, the efficacy of the photosensitizer is the most determining factor for the success of this therapeutic modality. Porphyrins, chlorins, phthalocyanines, boron-dipyrromethenes, and cyanines are some of the N-heterocycle-bearing dyes' classes with high biological promise. In this review, a concise approach is taken to these and other families of potential photosensitizers and the molecular modifications that have recently appeared in the literature within the scope of their photodynamic application, as well as how these compounds and their formulations may eventually overcome the deficiencies of the molecules currently clinically used and revolutionize the therapies to eradicate or delay the growth of tumor cells.

Photoinactivation of Planktonic Cells, Pseudohyphae, and Biofilms of Candida albicans Sensitized by a Free-Base Chlorin and Its Metal Complexes with Zn(II) and Pd(II)

Invasive candidiasis is an important cause of morbidity and mortality, and its occurrence is increasing due to the growing complexity of patients. In particular, Candida albicans exhibits several virulence factors that facilitate yeast colonization in humans. In this sense, the photodynamic inactivation of yeasts is a promising new alternative to eliminate fungal infections. Herein, the photodynamic activity sensitized by a free-base chlorin (TPCF₁₆) and its complexes with Zn(II) (ZnTPCF₁₆) and Pd(II) (PdTPCF₁₆) was investigated in order to eliminate C. albicans under different forms of cell cultures. A decrease in cell survival of more than 5 log was found in planktonic cells incubated with 5 μM TPCF₁₆ or ZnTPCF₁₆ upon 15 min of white-light irradiation. The mechanism of action mainly involved a type II pathway in the inactivation of C. albicans cells. In addition, the photodynamic action induced by these chlorins was able to suppress the growth of C. albicans in a culture medium. These photosensitizers were also effective to photoinactivate C. albicans pseudohyphae suspended in PBS. Furthermore, the biofilms of C. albicans that incorporated the chlorins during the proliferation stage were completely eradicated using 5 μM TPCF₁₆ or ZnTPCF₁₆ after 60 min of light irradiation. The studies indicated that these chlorins are effective photosensitizing agents to eliminate C. albicans as planktonic cells, pseudohyphae, and biofilms.

Photodynamic properties of lysine and arginine derivatives of bacteriopurpurinimide

Background: O-propyloxime-N-propoxybacteriopurpurinimide methyl ester (3) is a near-infrared photosensitizer with confirmed in vivo anticancer activity. Methods: Conjugates of 3 with arginine (1) or lysine attached at an ε-amino group (2a) or α-amino group (2b) were studied as anticancer and antibacterial photosensitizers and compared with 3. Results: The new conjugates preserve advanced spectral characteristics of 3 and high singlet oxygen quantum yield. They demonstrated tenfold higher photocytotoxicity for cancer cells, due to their enhanced intracellular accumulation and altered localization. Though they showed threefold decreased antibacterial photodynamic effect compared with 3, they kill planktonic Staphylococcus aureus bacteria, and 1 destroys bacterial biofilms. Conclusion: Conjugates 1 and 2b are near-infrared photosensitizers with high anticancer and limited antibacterial activity.

Antimicrobial Photosensitizing Material Based on Conjugated Zn(II) Porphyrins

The widespread use of antibiotics has led to a considerable increase in the resistance of microorganisms to these agents. Consequently, it is imminent to establish new strategies to combat pathogens. An alternative involves the development of photoactive polymers that represent an interesting strategy to kill microbes and maintain aseptic surfaces. In this sense, a conjugated polymer (PZnTEP) based on Zn(II) 5,10,15,20-tetrakis-[4-(ethynyl)phenyl]porphyrin (ZnTEP) was obtained by the homocoupling reaction of terminal alkyne groups. PZnTEP exhibits a microporous structure with high surface areas allowing better interaction with bacteria. The UV-visible absorption spectra show the Soret and Q bands of PZnTEP red-shifted by about 18 nm compared to those of the monomer. Also, the conjugate presents the two red emission bands, characteristic of porphyrins. This polymer was able to produce singlet molecular oxygen and superoxide radical anion in the presence of NADH. Photocytotoxic activity sensitized by PZnTEP was investigated in bacterial suspensions. No viable Staphylococcus aureus cells were detected using 0.5 µM PZnTEP and 15 min irradiation. Under these conditions, complete photoinactivation of Escherichia coli was observed in the presence of 100 mM KI. Likewise, no survival was detected for E. coli incubated with 1.0 µM PZnTEP after 30 min irradiation. Furthermore, polylactic acid surfaces coated with PZnTEP were able to kill efficiently these bacteria. This surface can be reused for at least three photoinactivation cycles. Therefore, this conjugated photodynamic polymer is an interesting antimicrobial photoactive material for designing and developing self-sterilizing surfaces.

Charge density distribution effect in pyrrolidine-fused chlorins on microbial uptake and antimicrobial photoinactivation of microbial pathogens

Two novels structurally related pyrrolidine-fused chlorins were synthesized from 5,10,15,20-tetrakis(pentafluorophenyl)chlorin by nucleophilic aromatic substitution of the para-fluoro groups. The reaction with 2-dimethylaminoethanol produced TPCF₁₆-NMe₂ in 77% yield, while TPCF₁₆-NBu was obtained using butylamine in 87% yield. The latter was extensively methylated to form TPCF₁₆-N⁺Bu in 92% yield. The synthetic strategy was designed to compare the effect of charge density distribution on chlorin in the efficacy to induce photodynamic inactivation of pathogens. TPCF₁₆-NMe₂ has five tertiary amines that can acquire positive charges in aqueous medium by protonation. Furthermore, four of the cationic groups are located in amino groups linked to the chlorine macrocycle by an aliphatic structure of two carbon atoms, which gives it greater movement capacity. In contrast, TPCF₁₆-N⁺Bu presents intrinsic positive charges on aromatic rings. Absorption and fluorescence emission properties were not affected by the peripheral substitution on the chlorin macrocycle. Both photosensitizers (PSs) were able to form singlet molecular oxygen and superoxide anion radical in solution. Uptake and photodynamic inactivation mediated by these chlorins were examined on Staphylococcus aureus and Escherichia coli. Both phototherapeutic agents produced efficient photoinactivation of S. aureus. However, only TPCF₁₆-NMe₂ was rapidly bound to E. coli cells and this chlorin was effective to photoinactivate both strains of bacteria using lower concentrations and shorter irradiation periods. Our outcomes reveal that the charge density distribution is a key factor to consider in the development of new PSs. Accordingly, this work stands out as a promising starting point for the design of new tetrapyrrolic macrocycles with application in PDI.

Porphyrin-Schiff Base Conjugates Bearing Basic Amino Groups as Antimicrobial Phototherapeutic Agents

New porphyrin–Schiff base conjugates bearing one (6) and two (7) basic amino groups were synthesized by condensation between tetrapyrrolic macrocycle-containing amine functions and 4-(3-(N,N-dimethylamino)propoxy)benzaldehyde. This approach allowed us to easily obtain porphyrins substituted by positive charge precursor groups in aqueous media. These compounds showed the typical Soret and four Q absorption bands with red fluorescence emission (Φ_F ~ 0.12) in N,N-dimethylformamide. Porphyrins 6 and 7 photosensitized the generation of O₂(¹Δ_g) (Φ_Δ ~ 0.44) and the photo-oxidation of L-tryptophan. The decomposition of this amino acid was mainly mediated by a type II photoprocess. Moreover, the addition of KI strongly quenched the photodynamic action through a reaction with O₂(¹Δ_g) to produce iodine. The photodynamic inactivation capacity induced by porphyrins 6 and 7 was evaluated in Staphylococcus aureus, Escherichia coli, and Candida albicans. Furthermore, the photoinactivation of these microorganisms was improved using potentiation with iodide anions. These porphyrins containing basic aliphatic amino groups can be protonated in biological systems, which provides an amphiphilic character to the tetrapyrrolic macrocycle. This effect allows one to increase the interaction with the cell wall, thus improving photocytotoxic activity against microorganisms.

Amphiphilic tricationic Zn(II)phthalocyanine provides effective photodynamic action to eradicate broad-spectrum microorganisms

A novel tricationic Zn(II)phthalocyanine derivative, (NCH₃)₃ZnPc³⁺, was synthesized by ring expansion reaction of boron(III) [2,9(10),16(17)-trinitrosubphthalocyaninato]chloride. First, the reaction of this subphthalocyanine with 2,3-naphthalenedicarbonitrile and Zn(CH₃COO)₂ catalyzed by 8-diazabicyclo[5.4.0]undec-7-ene was used to obtain the A₃B-type nitrophthalocyanine. After reduction of nitro groups with Na₂S and exhaustive methylation of amino groups, (NCH₃)₃ZnPc³⁺ was formed in good yields. In addition, the tetracationic analog (NCH₃)₄ZnPc⁴⁺ was synthesized to compare their properties. The absorption and fluorescence spectra showed the Q-bands and the red emission, respectively, which are characteristic of the Zn(II)phthalocyanine derivatives in N,N-dimethylformamide. Furthermore, photodynamic activity sensitized by these compounds was studied in the presence of different molecular probes to sense the formation of reactive oxygen species. (NCH₃)₃ZnPc³⁺ efficiently produced singlet molecular oxygen and also it sensitized the formation of superoxide anion radical in the presence of NADH, while the photodynamic activity of (NCH₃)₄ZnPc⁴⁺ was very poor, possibly due to the partial formation of aggregates. Furthermore, the decomposition of L-tryptophan induced by (NCH₃)₃ZnPc³⁺ was mainly mediated by a type II mechanism. Antimicrobial photodynamic inactivation sensitized by these phthalocyanines was evaluated in Staphylococcus aureus, Escherichia coli, and Candida albicans, as representative microbial cells. In cell suspensions, (NCH₃)₃ZnPc³⁺ was rapidly bound to microbial cells, showing bioimages with red fluorescence emission. After 5 min of irradiation with visible light, (NCH₃)₃ZnPc³⁺ was able to completely eliminate S. aureus, E. coli and C. albicans, using 1.0, 2.5 and 5.0 μM phthalocyanine, respectively. In contrast, a low photoinactivation activity was found with (NCH₃)₄ZnPc⁴⁺ as a photosensitizer. Therefore, the amphiphilic tricationic phthalocyanine (NCH₃)₃ZnPc³⁺ is a promising photosensitizing structure for application as a broad-spectrum antimicrobial phototherapeutic agent.

A novel tricationic fullerene C60 as broad-spectrum antimicrobial photosensitizer: mechanisms of action and potentiation with potassium iodide

A novel amphiphilic photosensitizing agent based on a tricationic fullerene C₆₀ (DMC₆₀³⁺) was efficiently synthesized from its non-charged analogue MMC₆₀. These fullerenes presented strong UV absorptions, with a broad range of less intense absorption up to 710 nm. Both compounds showed low fluorescence emission and were able to photosensitize the production of reactive oxygen species. Furthermore, photodecomposition of L-tryptophan sensitized by both fullerenes indicated an involvement of type II pathway. DMC₆₀³⁺ was an effective agent to produce the photodynamic inactivation (PDI) of Staphylococcus aureus, Escherichia coli and Candida albicans. Mechanistic insight indicated that the photodynamic action sensitized by DMC₆₀³⁺ was mainly mediated by both photoprocesses in bacteria, while a greater preponderance of the type II pathway was found in C. albicans. In presence of potassium iodide, a potentiation of PDI was observed due to the formation of reactive iodine species. Therefore, the amphiphilic DMC₆₀³⁺ can be used as an effective potential broad-spectrum antimicrobial photosensitizer.

Photoactive antimicrobial coating based on a PEDOT-fullerene C60 polymeric dyad

A photostable and photodynamic antimicrobial surface was successfully obtained and applied to photoinactivate microorganisms. This approach was based on the synthesis of a fullerene C₆₀ derivative (EDOT-C₆₀) where fullerene C₆₀ is covalently linked to 3,4-ethylenedioxythiophene (EDOT) through a 1,3-dipolar cycloaddition reaction. This dual-functional monomer bears an EDOT center connected via an alkyl chain to a fullerene C₆₀ moiety. In this structure, EDOT acts as an electropolymerizable unit that allows the film formation over conducting substrates, while fullerene C₆₀ performs the photodynamic antimicrobial activity. Electrochemical polymerization of EDOT was used to obtain stable and photodynamic polymeric films (PEDOT-C₆₀) in a controllable procedure. Cyclic voltammetry and UV-visible spectroscopy studies showed that the fullerene C₆₀ units were not altered during the electropolymerization process, obtaining surfaces with high fullerene content. Photobleaching measurements demonstrated that the electropolymerized films were highly photostable. Moreover, photodynamic properties of PEDOT-C₆₀ were compared with fullerene C₆₀ and showed that electrodeposited films were able to generate reactive oxygen species (ROS) through the two photomechanisms, producing singlet molecular oxygen (type II) and superoxide radical anion (type I). All studies demonstrated that fullerene C₆₀ moieties covalently attached to the polymeric matrix mainly conserve the photodynamic characteristics. Hence, photodynamic action sensitized by PEDOT-C₆₀ was assessed in vitro against Staphylococcus aureus. The photosensitized inactivation by the electropolymerized films on bacteria suspensions produced >99.9% reduction in S. aureus survival. Fluorescence microscopy experiments with S. aureus adhered to the PEDOT-C₆₀ surface showed a complete microbe annihilation. Also, the eradication of biofilms formed on PEDOT-C₆₀ surfaces resulted in a photokilling >99.9% after visible light irradiation. Our results demonstrated that these antimicrobial photodynamic polymeric films are a promising and versatile platform to photoinactivate microorganisms and to obtain photostable self-sterilizing surfaces.

A photostable and photodynamic antimicrobial surface was developed. The antimicrobial activity of the material reached outstanding levels of inactivation under different conditions: planktonic suspensions, adhered cells to the surface, and biofilms.

BODIPYs bearing a dimethylaminopropoxy substituent for imaging and photodynamic inactivation of bacteria

A new BODIPY (BDP 1) bearing a dimethylaminopropoxy group attached to a phenylene unit was synthesized. This compound was brominated to obtain the halogenated analog BDP 2, which was designed to enhance the photodynamic effect of BODIPY to kill bacteria without an intrinsic cationic charge. The basic amino group located at the end of the propoxy bridge can acquire a positive charge by protonation in an aqueous medium, increasing the binding to bacterial cells. Interaction and photokilling activity mediated by these compounds was evaluated in Staphylococcus aureus and Escherichia coli. BDP 1 and BDP 2 were rapidly bound to bacterial cells, showing bioimages with green emission. Complete elimination of S. aureus was detected when cells were incubated with 1 μM BDP 2 and irradiated for 5 min. Comparable photoinactivation was obtained with E. coli, after an irradiation of 30 min. Furthermore, BDP 2 was effective to kill bacteria at very low concentration (0.5 μM). Thus, BDP 1 showed mainly interesting properties as a fluorophore, whereas BDP 2 was highly effective photosensitizer as a broad-spectrum antibacterial agent.

Magnetic Nanoplatforms for in Situ Modification of Macromolecules: Synthesis, Characterization, and Photoinactivating Power of Cationic Nanoiman-Porphyrin Conjugates

A nanoplatform concept was developed to synthesize accessible photoactive magnetic nanoparticles (MNPs) of Fe₃O₄ coated with silica. This approach was based on the covalent binding of 5,10,15,20-tetrakis(pentafluorophenyl)porphyrin (TPPF₂₀) to aminopropyl-grafted MNPs by nucleophilic aromatic substitution reaction (S_NAr) to obtain conjugate MNP-P1. After in situ modification, the remaining pentafluorophenyl groups of TPPF₂₀ attached to MNPs were substituted by dimethylaminoethoxy groups to form MNP-P2. The basic amine group of these conjugates can be protonated in aqueous media. In addition, MNP-P1 and MNP-P2 were intrinsically charged to produce cationic conjugates MNP⁺-P1 and MNP⁺-P2⁺ by methylation. All of them were easily purified by magnetic decantation in high yields. The average size of the MNPs was ∼15 nm, and the main difference between these conjugates was the greater coating with positive charges of MNP⁺-P2⁺, as shown by the zeta potential values. Absorption spectra exhibited the Soret and Q bands characteristic of TPPF₂₀ linked to MNPs. Furthermore, these conjugates showed red fluorescence emission of porphyrin with quantum yields of 0.011-0.036. The photodynamic effect sensitized by the conjugates indicated the efficient formation of singlet molecular oxygen in different media, reaching quantum yield values of 0.17-0.34 in N,N-dimethylformamide. The photodynamic activity of the conjugates was evaluated to inactivate the Gram-positive bacteria Staphylococcus aureus, the Gram-negative bacteria Escherichia coli, and the yeast Candida albicans. The modified cationic MNP⁺-P2⁺ was the most effective conjugate for photodynamic inactivation (PDI) of microorganisms. Binding of this conjugate to bacteria and photoinactivation capability was checked by means of fluorescence microscopy. Also, sustainable use by recycling was determined after three PDI treatments. Therefore, this methodology is a suitable scaffold for the in situ modification of conjugates, and in particular, MNP⁺-P2⁺ represents a useful photodynamic active material to eradicate microorganisms.

Long-Lived Triplet Excited State Accessed with Spin-Orbit Charge Transfer Intersystem Crossing in Red Light-Absorbing Phenoxazine-Styryl BODIPY Electron Donor/Acceptor Dyads

Orthogonal phenoxazine-styryl BODIPY compact electron donor/acceptor dyads were prepared as heavy atom-free triplet photosensitizers (PSs) with strong red light absorption (ϵ=1.33×105  M-1  cm-1 at 630 nm), whereas the previously reported triplet photosensitizers based on the spin-orbit charge transfer intersystem crossing (SOCT-ISC) mechanism show absorption in a shorter wavelength range (<500 nm). More importantly, a long-lived triplet state (τT =333 μs) was observed for the new dyads. In comparison, the triplet state lifetime of the same chromophore accessed with the conventional heavy atom effect (HAE) is much shorter (τT =1.8 μs). Long triplet state lifetime is beneficial to enhance electron or energy transfer, the primary photophysical processes in the application of triplet PSs. Our approach is based on SOCT-ISC, without invoking of the HAE, which may shorten the triplet state lifetime. We used bisstyrylBodipy both as the electron acceptor and the visible light-harvesting chromophore, which shows red-light absorption. Femtosecond transient absorption spectra indicated the charge separation (109 ps) and SOCT-ISC (charge recombination, CR; 2.3 ns) for BDP-1. ISC efficiency of BDP-1 was determined as ΦT =25 % (in toluene). The dyad BDP-3 was used as triplet PS for triplet-triplet annihilation upconversion (upconversion quantum yield ΦUC =1.5 %; anti-Stokes shift is 5900 cm-1 ).

Mechanistic aspects in the photodynamic inactivation of Candida albicans sensitized by a dimethylaminopropoxy porphyrin and its equivalent with cationic intrinsic charges

Photocytotoxic effect induced by 5,10,15,20-tetrakis[4-(3-N,N-dimethylaminopropoxy)phenyl]porphyrin (TAPP) and 5,10,15,20-tetrakis[4-(3-N,N,N-trimethylaminepropoxy)phenyl]porphyrin (TAPP⁺⁴) was examined in Candida albicans to obtain information on the mechanism of photodynamic action and cell damage. For this purpose, the photokilling of the yeast was investigated under anoxic conditions and cell suspensions in D₂O. Moreover, photoinactivation of C. albicans was evaluated in presence of reactive oxygen species scavengers, such as sodium azide and d-mannitol. The results indicated that singlet molecular oxygen was the main reactive species involved in cell damage. On the other hand, the binding and distribution of these porphyrins in the cells was observed by fluorescence microscopy. Morphological damage was studied by transmission electron microscopy (TEM), indicating modifications in the cell envelopment. Furthermore, deformed cells were observed after photoinactivation of C. albicans by toluidine blue staining. In addition, modifications in the cell envelope due to the photodynamic activity was found by scanning electron microscopy (SEM). Similar photodamage was observed with both porphyrin, which mainly produced alterations in the cell barriers that lead to the photoinactivation of C. albicans.