High resolution, label-free photoacoustic imaging of live chicken embryo developing in bioengineered eggshell

Needle hydrophone-based photoacoustic microscopy with experimentally measured impulse response for improved depth of focus

Reconstruction-based acoustic-resolution photoacoustic microscopy (AR-PAM) has been developed to extend the depth of field (DOF), enabling simultaneous observation of structures at multiple depths. However, conventional AR-PAM systems, which rely on focused transducers, face inherent limitations in effectively increasing the DOF. To address this issue, we developed a needle hydrophone (NH)-based AR-PAM system that enables deep imaging with enhanced resolution and improved DOF. The proposed system was validated using tissue-mimicking phantoms and ex Ovo chick embryo imaging. Our results demonstrated a DOF exceeding 20 mm, a lateral resolution comparable to the NH diameter (∼400 µm) at shallow depth (10 mm) and 870 µm at deep depth (30 mm), and an axial resolution of 250 µm. Furthermore, we investigated the impact of different reconstruction techniques, including the measured impulse response function (MIRF), simulated impulse response function (SIRF), and coherence factor (CF). Our comparative analysis revealed that MIRF-based reconstruction provided superior performance in maintaining resolution and image quality across varying depths, making it the most effective approach for multi-depth imaging.

Looking deep inside tissue with photoacoustic molecular probes: a review

Significance

Deep tissue noninvasive high-resolution imaging with light is challenging due to the high degree of light absorption and scattering in biological tissue. Photoacoustic imaging (PAI) can overcome some of the challenges of pure optical or ultrasound imaging to provide high-resolution deep tissue imaging. However, label-free PAI signals from light absorbing chromophores within the tissue are nonspecific. The use of exogeneous contrast agents (probes) not only enhances the imaging contrast (and imaging depth) but also increases the specificity of PAI by binding only to targeted molecules and often providing signals distinct from the background.

Aim

We aim to review the current development and future progression of photoacoustic molecular probes/contrast agents.

Approach

First, PAI and the need for using contrast agents are briefly introduced. Then, the recent development of contrast agents in terms of materials used to construct them is discussed. Then, various probes are discussed based on targeting mechanisms, in vivo molecular imaging applications, multimodal uses, and use in theranostic applications.

Results

Material combinations are being used to develop highly specific contrast agents. In addition to passive accumulation, probes utilizing activation mechanisms show promise for greater controllability. Several probes also enable concurrent multimodal use with fluorescence, ultrasound, Raman, magnetic resonance imaging, and computed tomography. Finally, targeted probes are also shown to aid localized and molecularly specific photo-induced therapy.

Conclusions

The development of contrast agents provides a promising prospect for increased contrast, higher imaging depth, and molecularly specific information. Of note are agents that allow for controlled activation, explore other optical windows, and enable multimodal use to overcome some of the shortcomings of label-free PAI.

High frame rate (∼3 Hz) circular photoacoustic tomography using single-element ultrasound transducer aided with deep learning

Significance

In circular scanning photoacoustic tomography (PAT), it takes several minutes to generate an image of acceptable quality, especially with a single-element ultrasound transducer (UST). The imaging speed can be enhanced by faster scanning (with high repetition rate light sources) and using multiple-USTs. However, artifacts arising from the sparse signal acquisition and low signal-to-noise ratio at higher scanning speeds limit the imaging speed. Thus, there is a need to improve the imaging speed of the PAT systems without hampering the quality of the PAT image.

Aim

To improve the frame rate (or imaging speed) of the PAT system by using deep learning (DL).

Approach

For improving the frame rate (or imaging speed) of the PAT system, we propose a novel U-Net-based DL framework to reconstruct PAT images from fast scanning data.

Results

The efficiency of the network was evaluated on both single- and multiple-UST-based PAT systems. Both phantom and in vivo imaging demonstrate that the network can improve the imaging frame rate by approximately sixfold in single-UST-based PAT systems and by approximately twofold in multi-UST-based PAT systems.

Conclusions

We proposed an innovative method to improve the frame rate (or imaging speed) by using DL and with this method, the fastest frame rate of ∼ 3    Hz imaging is achieved without hampering the quality of the reconstructed image.

Assessment of flow within developing chicken vasculature and biofabricated vascularized tissues using multimodal imaging techniques

Fluid flow shear stresses are strong regulators for directing the organization of vascular networks. Knowledge of structural and flow dynamics information within complex vasculature is essential for tuning the vascular organization within engineered tissues, by manipulating flows. However, reported investigations of vascular organization and their associated flow dynamics within complex vasculature over time are limited, due to limitations in the available physiological pre-clinical models, and the optical inaccessibility and aseptic nature of these models. Here, we developed laser speckle contrast imaging (LSCI) and side-stream dark field microscopy (SDF) systems to map the vascular organization, spatio-temporal blood flow fluctuations as well as erythrocytes movements within individual blood vessels of developing chick embryo, cultured within an artificial eggshell system. By combining imaging data and computational simulations, we estimated fluid flow shear stresses within multiscale vasculature of varying complexity. Furthermore, we demonstrated the LSCI compatibility with bioengineered perfusable muscle tissue constructs, fabricated via molding techniques. The presented application of LSCI and SDF on perfusable tissues enables us to study the flow perfusion effects in a non-invasive fashion. The gained knowledge can help to use fluid perfusion in order to tune and control multiscale vascular organization within engineered tissues.

Label-free high frame rate imaging of circulating blood clots using a dual modal ultrasound and photoacoustic system

Deep vein thrombosis (DVT) is a disorder when a blood clot (thrombus) is formed in one of the deep veins. These clots detach from the original sites and circulate in the blood stream at high velocities. Diagnosing these blood clots at an early stage is necessary to decide the treatment strategy. For label-free, in vivo, and real-time detection, high framerate photoacoustic imaging can be used. In this work, a dual modal clinical ultrasound and photoacoustic (PA) system is used for the high framerate PA imaging of circulating blood clots in blood at linear velocities up to 107 cm/sec. Blood clot had 1.4 times higher signal-to-noise ratio (SNR) in the static mode and 1.3 times higher SNR compared to blood PA signal in the flow experiments. This work demonstrates that fast-moving circulating blood clots are easy to recognize against the background PA signal and may aid in early diagnosis.