1
|
The production and application of bacterial exopolysaccharides as biomaterials for bone regeneration. Carbohydr Polym 2022; 291:119550. [DOI: 10.1016/j.carbpol.2022.119550] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/07/2022] [Revised: 04/19/2022] [Accepted: 04/26/2022] [Indexed: 11/18/2022]
|
2
|
Jayasree R, Kumar TSS, Venkateswari R, Nankar RP, Doble M. Eggshell derived brushite bone cement with minimal inflammatory response and higher osteoconductive potential. JOURNAL OF MATERIALS SCIENCE. MATERIALS IN MEDICINE 2019; 30:113. [PMID: 31583477 DOI: 10.1007/s10856-019-6315-x] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/18/2019] [Accepted: 09/21/2019] [Indexed: 06/10/2023]
Abstract
Brushite cements are known for excellent osteoconductive and degradation properties, however, its widespread use is limited due to rapid setting time and poor mechanical properties. The eggshell derived calcium phosphates exhibits improved physical and biological properties due to the presence of biologically relevant ions. In this study, eggshell derived brushite cement (EB) was fabricated using β-tricalcium phosphate synthesized from eggshells. The presence of trace elements in EB prolonged its setting time. The size of brushite crystals in EB was found to be smaller than the pure brushite cement (PB) leading to increased initial compressive strength and higher in vitro degradation rate. The L6 and MG63 cell lines exhibited good biocompatibility with the cement at the end 72 h. In vivo studies of the cements were performed in rat calvarial defect model. Micro CT analysis showed faster degradation and accelerated bone formation in EB filled defect. Histological studies revealed infiltration of inflammatory cells into the implant site for both the cements till 6th week. However, inflammation was found to be significantly reduced at the 12th week in EB compared to PB leading to complete bone bridge formation. Multi-ion substituted EB seems to be a potential bone substitute material with a reasonable setting time for ease of handling, higher mechanical strength, minimal inflammatory response and higher bone regeneration.
Collapse
Affiliation(s)
- R Jayasree
- Medical Materials Laboratory, Department of Metallurgical and Materials Engineering, Indian Institute of Technology Madras, Chennai, 600036, India
| | - T S Sampath Kumar
- Medical Materials Laboratory, Department of Metallurgical and Materials Engineering, Indian Institute of Technology Madras, Chennai, 600036, India.
| | - R Venkateswari
- Department of Medical Biochemistry, Dr. ALM Mudaliar Postgraduate Institute of Basic Medical Sciences, University of Madras, Chennai, 600042, India
| | - Rakesh P Nankar
- Department of Biotechnology, Indian Institute of Technology Madras, Chennai, 600036, India
| | - Mukesh Doble
- Department of Biotechnology, Indian Institute of Technology Madras, Chennai, 600036, India
| |
Collapse
|
3
|
Rödel M, Teßmar J, Groll J, Gbureck U. Highly flexible and degradable dual setting systems based on PEG-hydrogels and brushite cement. Acta Biomater 2018; 79:182-201. [PMID: 30149213 DOI: 10.1016/j.actbio.2018.08.028] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/16/2018] [Revised: 08/17/2018] [Accepted: 08/21/2018] [Indexed: 01/21/2023]
Abstract
With respect to the composition of natural bone, we established a degradable dual setting system of different poly(ethylene glycol) (PEG)-based hydrogels combined with a brushite cement. The idea was to reinforce the inorganic calcium phosphate mineral phase with an organic, polymeric phase to alter the cement's properties towards ductility and elasticity. Extremely flexible samples were produced via this dual setting approach with a fully reversible elasticity of the samples containing high molecular weight PEG-based hydrogel precursors. Using the decalcifying agent EDTA, the whole inorganic phase was dissolved due to Ca2+-complexation and dimensionally stable hydrogels were obtained, indicating a homogenous polymeric phase within the composites. This was also confirmed by SEM-analysis, where no discontinuities or agglomerations of the phase were observed. Additional XRD-measurements proved a significant influence of the coherent polymeric matrix on the conversion from β-TCP/MCPA to brushite with a decrease in signal intensity. The results confirmed a parallelly running process of setting reaction and gelation without an inhibition of the conversion to brushite and the formation of interpenetrating networks of hydrogel and cement. The strengths of this newly developed dual setting system are based on the material degradability as well as flexibility, which can be a promising tool for bone regeneration applications in non-load bearing craniomaxillofacial defects. STATEMENT OF SIGNIFICANCE Brushite based calcium phosphate cements (CPCs) are known as bone replacement materials, which degrade in vivo and are replaced by native bone. However, the pure inorganic material shows a brittle fracture behavior. Here, the addition of a polymeric phase can influence the mechanical properties to create more ductile and flexible materials. This polymeric phase should ideally form during cement setting by a polymerization reaction to achieve high polymer loads without altering cement viscosity and it should be degradable in vivo similar to the cement itself. Therefore, we developed a dual setting system based on simultaneous cement setting of brushite and lactide modified poly(ethylene glycol) dimethacrylate (PEG-PLLA-DMA)-based hydrogel. It was evident that the gels form a continuous phase within the cement after radical polymerization with a strong reduction of cement brittleness.
Collapse
Affiliation(s)
- Michaela Rödel
- Department for Functional Materials in Medicine and Dentistry and Bavarian Polymer Institute (BPI), Julius Maximilians University of Würzburg, Pleicherwall 2, 97070 Würzburg, Germany
| | - Jörg Teßmar
- Department for Functional Materials in Medicine and Dentistry and Bavarian Polymer Institute (BPI), Julius Maximilians University of Würzburg, Pleicherwall 2, 97070 Würzburg, Germany
| | - Jürgen Groll
- Department for Functional Materials in Medicine and Dentistry and Bavarian Polymer Institute (BPI), Julius Maximilians University of Würzburg, Pleicherwall 2, 97070 Würzburg, Germany
| | - Uwe Gbureck
- Department for Functional Materials in Medicine and Dentistry and Bavarian Polymer Institute (BPI), Julius Maximilians University of Würzburg, Pleicherwall 2, 97070 Würzburg, Germany.
| |
Collapse
|
4
|
Magnesium-based bioceramics in orthopedic applications. Acta Biomater 2018; 66:23-43. [PMID: 29197578 DOI: 10.1016/j.actbio.2017.11.033] [Citation(s) in RCA: 140] [Impact Index Per Article: 23.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/04/2017] [Revised: 11/17/2017] [Accepted: 11/20/2017] [Indexed: 11/22/2022]
Abstract
Magnesium ions are directly involved in numerous biological mechanisms; for example, they play an important part in the regulation of ion channels, DNA stabilization, enzyme activation and stimulation of cell growth and proliferation. This alkaline earth metal has gained great popularity in orthopedic applications in recent years. Magnesium-based bioceramics include a large group of magnesium containing compounds such as oxides, phosphates and silicates, that are involved in orthopedic applications like bone cements, bone scaffolds or implant coatings. This article aims to give a comprehensive review on different magnesium-based bioceramics, e.g. magnesium phosphates (MgO-P2O5), calcium magnesium phosphates (CaO-MgO-P2O5), and magnesium glasses (SiO2-MgO) with a strong focus on the chemistry and properties of magnesium phosphate containing cements as the main application form. In addition, the processing of magnesium phosphate minerals into macroporous scaffolds for tissue engineering applications by either using traditional porogens or by additive manufacturing approaches are reflected. Finally, the biological in vitro and in vivo properties of magnesium phosphates for bone regeneration are summarized, which show promising results regarding the application as bone replacement material, but still lack in terms of testing in large animal models, load-bearing application sites and clinical data. STATEMENT OF SIGNIFICANCE Though bone substitutes from calcium phosphates have been investigated for a long time, a new trend is visible in the biomaterials sector: magnesium based bioceramics from magnesium phosphates and silicates due to the special biological significance of magnesium ions in enzymatic activation, cell growth and proliferation, etc. In contrast to pure magnesium implants, such formulations do not release hydrogen during degradation. As with calcium based bioceramics, magnesium based bioceramics are used for the development of diverse applications such as cements, macroporous scaffolds and coatings. From this perspective, we present a systematic overview on diverse kinds of magnesium based bioceramics, their processing regimes for different clinical purposes and their behavior both in vitro and in vivo.
Collapse
|
5
|
Sheikh Z, Zhang YL, Tamimi F, Barralet J. Effect of processing conditions of dicalcium phosphate cements on graft resorption and bone formation. Acta Biomater 2017; 53:526-535. [PMID: 28213100 DOI: 10.1016/j.actbio.2017.02.022] [Citation(s) in RCA: 28] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/14/2016] [Revised: 01/21/2017] [Accepted: 02/13/2017] [Indexed: 11/18/2022]
Abstract
Dicalcium phosphate cements (brushite and monetite) are resorbable biomaterials with osteoconductive potential for bone repair and regeneration that have yet to gain widespread commercial use. Brushite can be converted to monetite by heat treatments additionally resulting in various changes in the physico-chemical properties. However, since conversion is most commonly performed using autoclave sterilisation (wet heating), it is uncertain whether the properties observed for monetite as a result of heating brushite under dry conditions affect resorption and bone formation favourably. This study was designed to produce monetite grafts of differing physical form by autoclaving and dry heating (under vacuum) to be compared with brushite biomaterials in an orthotopic pre-clinical implantation model in rabbit for 12weeks. It was observed that monetite grafts had higher porosity and specific surface area than their brushite precursors. The autoclaved monetite grafts had compressive strength reduced by 50% when compared with their brushite precursors. However, the dry heat converted monetite grafts had compressive strength comparable with brushite. Results from in vivo experiments revealed that both types of monetite graft materials resorbed faster than brushite and more bone formation was achieved. There was no significant difference in the amount of bone formed between the two types of monetite grafts. The implanted brushite grafts underwent phase transformation to form hydroxyapatite, which ultimately limited bioresorption. However, this was not observed in both types of monetite grafts. In summary, both autoclaving and dry heating the preset brushite cement grafts resulted in monetite biomaterials which were more resorbable with potential to be investigated and optimized for orthopaedic and maxillofacial bone repair and regeneration applications. STATEMENT OF SIGNIFICANCE We present in this original research article a comparison between dicalcium phosphate cement based grafts (brushite and 2 types of monetite grafts prepared by wet and dry thermal processing) with regards to resorption and bone formation in vivo after orthotopic implantation in rabbit condylar femural region. To the best of our knowledge this is the first in vivo study that reports a comparison resorption and bone formation using brushite and two types of monetite biomaterials. Also, we have included in the manuscript a summary of all the in vivo studies performed on brushite and monetite biomaterials to date. This includes cement composition, physical properties (porosity and surface area), implantation and histomorphometrical details such as animal species, site of implantation, observation period, percentage bone tissue formation and residual graft material. In addition, we calculated the percentage resorption of graft materials based upon various implantation sites and included that into the discussion section. The results of this original research provides greater understanding of the resorption processes of dicalcium phosphate based grafts, allowing preparation of bone substitute materials with more predictable resorption profiles in future.
Collapse
Affiliation(s)
- Zeeshan Sheikh
- Faculty of Dentistry, McGill University, 3640, Strathcona Anatomy and Dentistry Building, Rue University, Montreal, Quebec H3A 0C7, Canada.
| | - Yu Ling Zhang
- Faculty of Dentistry, McGill University, 3640, Strathcona Anatomy and Dentistry Building, Rue University, Montreal, Quebec H3A 0C7, Canada.
| | - Faleh Tamimi
- Faculty of Dentistry, McGill University, 3640, Strathcona Anatomy and Dentistry Building, Rue University, Montreal, Quebec H3A 0C7, Canada.
| | - Jake Barralet
- Faculty of Dentistry, McGill University, 3640, Strathcona Anatomy and Dentistry Building, Rue University, Montreal, Quebec H3A 0C7, Canada; Division of Orthopaedics, Department of Surgery, Faculty of Medicine, McGill University, 1650 Cedar Ave, Montreal General Hospital, Montreal, Quebec H3G 1A4, Canada.
| |
Collapse
|
6
|
Sheikh Z, Abdallah MN, Hanafi AA, Misbahuddin S, Rashid H, Glogauer M. Mechanisms of in Vivo Degradation and Resorption of Calcium Phosphate Based Biomaterials. MATERIALS (BASEL, SWITZERLAND) 2015; 8:7913-7925. [PMID: 28793687 PMCID: PMC5458904 DOI: 10.3390/ma8115430] [Citation(s) in RCA: 110] [Impact Index Per Article: 12.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/14/2015] [Revised: 11/09/2015] [Accepted: 11/13/2015] [Indexed: 12/21/2022]
Abstract
Calcium phosphate ceramic materials are extensively used for bone replacement and regeneration in orthopedic, dental, and maxillofacial surgical applications. In order for these biomaterials to work effectively it is imperative that they undergo the process of degradation and resorption in vivo. This allows for the space to be created for the new bone tissue to form and infiltrate within the implanted graft material. Several factors affect the biodegradation and resorption of calcium phosphate materials after implantation. Various cell types are involved in the degradation process by phagocytic mechanisms (monocytes/macrophages, fibroblasts, osteoblasts) or via an acidic mechanism to reduce the micro-environmental pH which results in demineralization of the cement matrix and resorption via osteoclasts. These cells exert their degradation effects directly or indirectly through the cytokine growth factor secretion and their sensitivity and response to these biomolecules. This article discusses the mechanisms of calcium phosphate material degradation in vivo.
Collapse
Affiliation(s)
- Zeeshan Sheikh
- Faculty of Dentistry, University of Toronto, Toronto, ON M5S 3E2, Canada.
| | | | | | - Syed Misbahuddin
- Faculty of Dentistry, Department of Dental Public Health, University of Toronto, Toronto, ON M5S 3E2, Canada.
| | - Haroon Rashid
- College of Dentistry, Division of Prosthodontics, Ziauddin University, Karachi 75530, Pakistan.
| | - Michael Glogauer
- Matrix Dynamics Group, Faculty of Dentistry, University of Toronto, Toronto, ON M5S 3E2, Canada.
| |
Collapse
|
7
|
Biodegradable Materials for Bone Repair and Tissue Engineering Applications. MATERIALS 2015; 8:5744-5794. [PMID: 28793533 PMCID: PMC5512653 DOI: 10.3390/ma8095273] [Citation(s) in RCA: 354] [Impact Index Per Article: 39.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/15/2015] [Revised: 08/09/2015] [Accepted: 08/24/2015] [Indexed: 12/21/2022]
Abstract
This review discusses and summarizes the recent developments and advances in the use of biodegradable materials for bone repair purposes. The choice between using degradable and non-degradable devices for orthopedic and maxillofacial applications must be carefully weighed. Traditional biodegradable devices for osteosynthesis have been successful in low or mild load bearing applications. However, continuing research and recent developments in the field of material science has resulted in development of biomaterials with improved strength and mechanical properties. For this purpose, biodegradable materials, including polymers, ceramics and magnesium alloys have attracted much attention for osteologic repair and applications. The next generation of biodegradable materials would benefit from recent knowledge gained regarding cell material interactions, with better control of interfacing between the material and the surrounding bone tissue. The next generations of biodegradable materials for bone repair and regeneration applications require better control of interfacing between the material and the surrounding bone tissue. Also, the mechanical properties and degradation/resorption profiles of these materials require further improvement to broaden their use and achieve better clinical results.
Collapse
|
8
|
Sheikh Z, Sima C, Glogauer M. Bone Replacement Materials and Techniques Used for Achieving Vertical Alveolar Bone Augmentation. MATERIALS 2015. [PMCID: PMC5455762 DOI: 10.3390/ma8062953] [Citation(s) in RCA: 87] [Impact Index Per Article: 9.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Indexed: 01/12/2023]
Abstract
Alveolar bone augmentation in vertical dimension remains the holy grail of periodontal tissue engineering. Successful dental implant placement for restoration of edentulous sites depends on the quality and quantity of alveolar bone available in all spatial dimensions. There are several surgical techniques used alone or in combination with natural or synthetic graft materials to achieve vertical alveolar bone augmentation. While continuously improving surgical techniques combined with the use of auto- or allografts provide the most predictable clinical outcomes, their success often depends on the status of recipient tissues. The morbidity associated with donor sites for auto-grafts makes these techniques less appealing to both patients and clinicians. New developments in material sciences offer a range of synthetic replacements for natural grafts to address the shortcoming of a second surgical site and relatively high resorption rates. This narrative review focuses on existing techniques, natural tissues and synthetic biomaterials commonly used to achieve vertical bone height gain in order to successfully restore edentulous ridges with implant-supported prostheses.
Collapse
Affiliation(s)
- Zeeshan Sheikh
- Matrix Dynamics Group, Faculty of Dentistry, University of Toronto, Room 221, Fitzgerald Building, 150 College Street, Toronto, ON M5S 3E2, Canada; E-Mail:
- Author to whom correspondence should be addressed; E-Mail: ; Tel.: +1-514-224-7490
| | - Corneliu Sima
- Department of Applied Oral Sciences, The Forsyth Institute, 245 First Street, Cambridge, MA 02142, USA; E-Mail:
| | - Michael Glogauer
- Matrix Dynamics Group, Faculty of Dentistry, University of Toronto, Room 221, Fitzgerald Building, 150 College Street, Toronto, ON M5S 3E2, Canada; E-Mail:
| |
Collapse
|
9
|
Kanter B, Geffers M, Ignatius A, Gbureck U. Control of in vivo mineral bone cement degradation. Acta Biomater 2014; 10:3279-87. [PMID: 24769112 DOI: 10.1016/j.actbio.2014.04.020] [Citation(s) in RCA: 73] [Impact Index Per Article: 7.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/20/2013] [Revised: 03/26/2014] [Accepted: 04/16/2014] [Indexed: 11/25/2022]
Abstract
The current study aimed to prevent the formation of hydroxyapatite reprecipitates in brushite-forming biocements by minimizing the availability of free Ca(2+) ions in the cement matrix. This was achieved by both maximizing the degree of cement setting to avoid unreacted, calcium-rich cement raw materials which can deliver Ca(2+) directly to the cement matrix after dissolution, and by a reduction in porosity to reduce Ca(2+) diffusion into the set cement matrix. In addition, a biocement based on the formation of the magnesium phosphate mineral struvite (MgNH4PO4·6H2O) was tested, which should prevent the formation of low-solubility hydroxyapatite reprecipitates due to the high magnesium content. Different porosity levels were fabricated by altering the powder-to-liquid ratio at which the cements were mixed and the materials were implanted into mechanically unloaded femoral defects in sheep for up to 10 months. While the higher-porosity brushite cement quantitatively transformed into crystalline octacalcium phosphate after 10 months, slowing down cement resorption, a lower-porosity brushite cement modification was found to be chemically stable with the absence of reprecipitate formation and minor cement resorption from the implant surface. In contrast, struvite-forming cements were much more degradable due to the absence of mineral reprecipitates and a nearly quantitative cement degradation was found after 10 months of implantation.
Collapse
|
10
|
Abstract
Biomaterials are playing a vital role in our day-to-day life. Hyaluronan (hyaluronic acid), a biomaterial, receives special attention among them. Hyaluronic acid (HA) is a polyanionic natural polymer occurring as linear polysaccharide composed of glucuronic acid and N-acetylglucosamine repeats via a β-1,4 linkage. It is the most versatile macromolecule present in the connective tissues of all vertebrates. Hyaluronic acid has a wide range of applications with its excellent physicochemical properties such as biodegradability, biocompatibility, nontoxicity, and nonimmunogenicity and serves as an excellent tool in biomedical applications such as osteoarthritis surgery, ocular surgery, plastic surgery, tissue engineering, and drug delivery. It plays a key role in cushioning and lubricating the body and is abundant in the eyes, joints, and heart valves. A powerful antioxidant, hyaluronic acid is perhaps best known for its ability to bond water to tissue. Hyaluronan production increases in proliferating cells, and the polymer may play a role in mitosis. This chapter gives an overview of hyaluronic acid and its physicochemical properties and applications. This chapter gives a deep understanding on the special benefits of hyaluronic acid in the fields of pharmaceutical, medical, and environmental applications. Hyaluronic acid paves the way for beneficial research and applications to the welfare of life forms.
Collapse
Affiliation(s)
- Prasad N Sudha
- PG and Research Department of Chemistry, DKM College for Women, Thiruvalluvar University, Vellore, Tamil Nadu, India.
| | - Maximas H Rose
- Department of Biology, Sri Sai Vidyasharam, Vellore, Tamil Nadu, India
| |
Collapse
|
11
|
Davison N, Yuan H, de Bruijn JD, Barrere-de Groot F. In vivo performance of microstructured calcium phosphate formulated in novel water-free carriers. Acta Biomater 2012; 8:2759-69. [PMID: 22487931 DOI: 10.1016/j.actbio.2012.04.007] [Citation(s) in RCA: 17] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/27/2011] [Revised: 03/27/2012] [Accepted: 04/02/2012] [Indexed: 10/28/2022]
Abstract
Osteoinductive calcium phosphate (CaP) ceramics can be combined with polymeric carriers to make shapeable bone substitutes as an alternative to autologous bone; however, carriers containing water may degrade the ceramic surface microstructure, which is crucial to bone formation. In this study five novel tricalcium phosphate (TCP) formulations were designed from water-free polymeric binders and osteoinductive TCP granules of different particle sizes (500-1000 μm for moldable putty forms, and 150-500 μm for flowable paste forms). The performance of these novel TCP formulations was studied and compared with control TCP granules alone (both 150-500 and 500-1000 μm). In vitro the five TCP formulations were characterized by their carrier dissolution times and TCP mineralization kinetic profiles in simulated body fluid. In vivo the formulations were implanted in the dorsal muscle and a unicortical femoral defect (Ø=5 mm) of dogs for 12 weeks. The TCP formulation based on a xanthan gum-glycerol carrier exhibited fast carrier dissolution (1 h) and TCP mineralization (7 days) in vitro, but induced inflammation and showed little ectopic bone formation. This carrier chemistry was thus found to disrupt the early cellular response related to osteoinduction by microstructured TCP. TCP formulations based on carboxymethyl cellulose-glycerol and Polyoxyl 15-hydroxystearate-Pluronic(®) F127 allowed the in vitro surface mineralization of TCP by day 7 and produced the highest level of orthotopic bone bridging and ectopic bone formation, which was equivalent to the control. These results demonstrate that water-free carriers can preserve the chemistry, microstructure, and performance of osteoinductive CaP ceramics.
Collapse
|
12
|
Perez RA, Kim HW, Ginebra MP. Polymeric additives to enhance the functional properties of calcium phosphate cements. J Tissue Eng 2012; 3:2041731412439555. [PMID: 22511991 PMCID: PMC3324842 DOI: 10.1177/2041731412439555] [Citation(s) in RCA: 101] [Impact Index Per Article: 8.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022] Open
Abstract
The vast majority of materials used in bone tissue engineering and regenerative medicine are based on calcium phosphates due to their similarity with the mineral phase of natural bone. Among them, calcium phosphate cements, which are composed of a powder and a liquid that are mixed to obtain a moldable paste, are widely used. These calcium phosphate cement pastes can be injected using minimally invasive surgery and adapt to the shape of the defect, resulting in an entangled network of calcium phosphate crystals. Adding an organic phase to the calcium phosphate cement formulation is a very powerful strategy to enhance some of the properties of these materials. Adding some water-soluble biocompatible polymers in the calcium phosphate cement liquid or powder phase improves physicochemical and mechanical properties, such as injectability, cohesion, and toughness. Moreover, adding specific polymers can enhance the biological response and the resorption rate of the material. The goal of this study is to overview the most relevant advances in this field, focusing on the different types of polymers that have been used to enhance specific calcium phosphate cement properties.
Collapse
Affiliation(s)
- Roman A Perez
- Biomaterials, Biomechanics, and Tissue Engineering Group, Department of Materials Science and Metallurgy, Technical University of Catalonia (UPC), Barcelona, Spain
- Biomedical Research Networking Center in Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), Zaragoza, Spain
- Institute of Tissue Regeneration Engineering (ITREN), Dankook University, Cheonan, South Korea
| | - Hae-Won Kim
- Institute of Tissue Regeneration Engineering (ITREN), Dankook University, Cheonan, South Korea
- Department of Biomaterials Science, College of Dentistry, Dankook University, Cheonan, South Korea
- Department of Nanobiomedical Science and WCU Research Center, Dankook University, Cheonan, South Korea
| | - Maria-Pau Ginebra
- Biomaterials, Biomechanics, and Tissue Engineering Group, Department of Materials Science and Metallurgy, Technical University of Catalonia (UPC), Barcelona, Spain
- Biomedical Research Networking Center in Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), Zaragoza, Spain
| |
Collapse
|
13
|
Dicalcium phosphate cements: brushite and monetite. Acta Biomater 2012; 8:474-87. [PMID: 21856456 DOI: 10.1016/j.actbio.2011.08.005] [Citation(s) in RCA: 218] [Impact Index Per Article: 18.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/29/2011] [Revised: 08/03/2011] [Accepted: 08/06/2011] [Indexed: 11/22/2022]
Abstract
Dicalcium phosphate cements were developed two decades ago and ever since there has been a substantial growth in research into improving their properties in order to satisfy the requirements needed for several clinical applications. The present paper presents an overview of the rapidly expanding research field of the two main dicalcium phosphate bioceramics: brushite and monetite. This review begins with a summary of all the different formulae developed to prepare dicalcium phosphate cements, and their setting reaction, in order to set the scene for the key cement physical and chemical properties, such as compressive and tensile strength, cohesion, injectability and shelf-life. We address the issue of brushite conversion into either monetite or apatite. Moreover, we discuss the in vivo behavior of the cements, including their ability to promote bone formation, biodegradation and potential clinical applications in drug delivery, orthopedics, craniofacial surgery, cancer therapy and biosensors.
Collapse
|
14
|
Großardt C, Ewald A, Grover LM, Barralet JE, Gbureck U. Passive and Active In Vitro Resorption of Calcium and Magnesium Phosphate Cements by Osteoclastic Cells. Tissue Eng Part A 2010; 16:3687-95. [DOI: 10.1089/ten.tea.2010.0281] [Citation(s) in RCA: 90] [Impact Index Per Article: 6.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/13/2022] Open
Affiliation(s)
- Christian Großardt
- Department for Functional Materials in Medicine and Dentistry, University of Würzburg, Würzburg, Germany
| | - Andrea Ewald
- Department for Functional Materials in Medicine and Dentistry, University of Würzburg, Würzburg, Germany
| | - Liam M. Grover
- School of Chemical Engineering, University of Birmingham, Edgbaston, Birmingham, United Kingdom
| | - Jake E. Barralet
- Faculty of Dentistry, McGill University, Montreal, Quebec, Canada
| | - Uwe Gbureck
- Department for Functional Materials in Medicine and Dentistry, University of Würzburg, Würzburg, Germany
| |
Collapse
|
15
|
Alkhraisat MH, Rueda C, Jerez LB, Tamimi Mariño F, Torres J, Gbureck U, Lopez Cabarcos E. Effect of silica gel on the cohesion, properties and biological performance of brushite cement. Acta Biomater 2010; 6:257-65. [PMID: 19523541 DOI: 10.1016/j.actbio.2009.06.010] [Citation(s) in RCA: 27] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/02/2009] [Revised: 06/04/2009] [Accepted: 06/04/2009] [Indexed: 10/20/2022]
Abstract
The cohesion of calcium phosphate cements can be improved by the addition of substances to either the solid or liquid phase during the setting reaction. This study reports the effect of silica gel on brushite cement cohesion. The cement was prepared using a mixture of beta-tricalcium phosphate (beta-TCP) and monocalcium phosphate monohydrate as the solid phase, while the liquid phase comprised carboxylic acids silica gel. This cement presents a shorter final setting time (FST), better cohesion and higher amount of unreacted beta-TCP than the cement prepared without silica gel. Furthermore, in vivo experiments using rabbits as an animal model showed that after 8 weeks of implantation cements modified with silica gel showed a similar new bone formation volume and more remaining graft in comparison with unmodified cements. Thus, the silica gel could be efficiently applied to reduce cement disintegration and to decrease the resorption rate of brushite cements.
Collapse
|
16
|
Abstract
It has been close to a century since calcium phosphate materials were first used as bone graft substitutes. Numerous studies conducted in the last two decades have produced a wealth of information on the chemistry, in vitro properties, and biological characteristics of granular calcium phosphates and calcium phosphate cement biomaterials. An in depth analysis of several key areas of calcium phosphate cement properties is presented with the aim of developing strategies that could lead to break-through improvements in the functional efficacies of these materials.
Collapse
Affiliation(s)
- L C Chow
- Paffenbarger Research Center, American Dental Association Foundation NIST, Gaithersburg, MD 20899, USA.
| |
Collapse
|
17
|
Tamimi F, Torres J, Lopez-Cabarcos E, Bassett DC, Habibovic P, Luceron E, Barralet JE. Minimally invasive maxillofacial vertical bone augmentation using brushite based cements. Biomaterials 2009; 30:208-16. [DOI: 10.1016/j.biomaterials.2008.09.032] [Citation(s) in RCA: 51] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/17/2008] [Accepted: 09/15/2008] [Indexed: 11/25/2022]
|
18
|
Mariño FT, Torres J, Hamdan M, Rodríguez CR, Cabarcos EL. Advantages of using glycolic acid as a retardant in a brushite forming cement. J Biomed Mater Res B Appl Biomater 2007; 83:571-9. [PMID: 17465024 DOI: 10.1002/jbm.b.30830] [Citation(s) in RCA: 37] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
Abstract
In this study we have compared the effect of using acetic, glycolic, and citric acids on the brushite cement setting reaction and the properties of the resultant cement. The cement solid phase was made by mixing beta-tricalcium phosphate (beta-TCP), monocalcium dihydrogen phosphate anhydrate (MCPA), and sodium pyrophosphate, whereas the cement liquid phase consisted of aqueous solutions of carboxy acids at concentrations ranging from 0.5 to 3.5M. Cements were prepared by mixing the solid phase with the liquid phase to form a workable paste. The cement setting time was longer for glycolic and citric acids. The best mechanical properties in dry environments were obtained using glycolic and citric acid liquid phases. In a wet environment at 37 degrees C, the cement set with glycolic acid was the strongest one. Brushite cement diametral tensile strength seems to be affected by the calcium-carboxyl phase produced in the setting reaction. The acceptable setting time and mechanical properties of cements set in glycolic acid solutions are attributed to the additional hydrophilic groups in the carboxylic acid and the low solubility in water of the calcium salt produced in the reaction. Moreover, at high concentrations, carboxylic acids add chemically to the cement matrix becoming reactants themselves.
Collapse
Affiliation(s)
- Faleh Tamimi Mariño
- Departamento de Quimica Física II, Facultad de Farmacia, Universidad Complutense de Madrid, Pza Ramon y Cajal, 28040 Madrid, Spain.
| | | | | | | | | |
Collapse
|