Improved drug delivery properties of PVDF membranes functionalized with β-cyclodextrin—Application to guided tissue regeneration in periodontology

Coatings of Cyclodextrin/Citric-Acid Biopolymer as Drug Delivery Systems: A Review

In the early 2000s, a method for cross-linking cyclodextrins (CDs) with citric acid (CTR) was developed. This method was nontoxic, environmentally friendly, and inexpensive compared to the others previously proposed in the literature. Since then, the CD/CTR biopolymers have been widely used as a coating on implants and other materials for biomedical applications. The present review aims to cover the chemical properties of CDs, the synthesis routes of CD/CTR, and their applications as drug-delivery systems when coated on different substrates. Likewise, the molecules released and other pharmaceutical aspects involved are addressed. Moreover, the different methods of pretreatment applied on the substrates before the in situ polymerization of CD/CTR are also reviewed as a key element in the final functionality. This process is not trivial because it depends on the surface chemistry, geometry, and physical properties of the material to be coated. The biocompatibility of the polymer was also highlighted. Finally, the mechanisms of release generated in the CD/CTR coatings were analyzed, including the mathematical model of Korsmeyer-Peppas, which has been dominantly used to explain the release kinetics of drug-delivery systems based on these biopolymers. The flexibility of CD/CTR to host a wide variety of drugs, of the in situ polymerization to integrate with diverse implantable materials, and the controllable release kinetics provide a set of advantages, thereby ensuring a wide range of future uses.

Antibiotic-Loaded Polymeric Barrier Membranes for Guided Bone/Tissue Regeneration: A Mini-Review

Polymeric membranes are frequently used for bone regeneration in oral and periodontal surgery. Polymers provide adequate mechanical properties (i.e., Young’s modulus) to support oral function and also pose some porosity with interconnectivity to permit for cell proliferation and migration. Bacterial contamination of the membrane is an event that may lead to infection at the bone site, hindering the clinical outcomes of the regeneration procedure. Therefore, polymeric membranes have been proposed as carriers for local antibiotic therapy. A literature search was performed for papers, including peer-reviewed publications. Among the different membranes, collagen is the most employed biomaterial. Collagen membranes and expanded polytetrafluoroethylene loaded with tetracyclines, and polycaprolactone with metronidazole are the combinations that have been assayed the most. Antibiotic liberation is produced in two phases. A first burst release is sometimes followed by a sustained liberation lasting from 7 to 28 days. All tested combinations of membranes and antibiotics provoke an antibacterial effect, but most of the time, they were measured against single bacteria cultures and usually non-specific pathogenic bacteria were employed, limiting the clinical relevance of the attained results. The majority of the studies on animal models state a beneficial effect of these antibiotic functionalized membranes, but human clinical assays are scarce and controversial.

Recent advances of polymer-based piezoelectric composites for biomedical applications

Over the past decades, electronics have become central to many aspects of biomedicine and wearable device technologies as a promising personalized healthcare platform. Lead-free piezoelectric materials for converting mechanical into electrical energy through piezoelectric transduction are of significant value in a diverse range of technological applications. Organic piezoelectric biomaterials have attracted widespread attention as the functional materials in the biomedical devices due to their advantages of excellent biocompatibility. They include synthetic and biological polymers. Many biopolymers have been discovered to possess piezoelectricity in an appreciable amount, however their investigation is still preliminary. Due to their piezoelectric properties, better known synthetic fluorinated polymers have been intensively investigated and applied in biomedical applications including controlled drug delivery systems, tissue engineering, microfluidic and artificial muscle actuators, among others. Piezoelectric polymers, especially poly (vinylidene fluoride) (PVDF) and its copolymers are increasingly receiving interest as smart biomaterials due to their ability to convert physiological movements to electrical signals when in a controllable and reproducible manner. Despite possessing the greatest piezoelectric coefficients among all piezoelectric polymers, it is often desirable to increase the electrical outputs. The most promising routes toward significant improvements in the piezoelectric response and energy-harvesting performance of such materials is loading them with various inorganic nanofillers and/or applying some modification during the fabrication process. This paper offers a comprehensive review of the principles, properties, and applications of organic piezoelectric biomaterials (polymers and polymer/ceramic composites) with special attention on PVDF-based polymers and their composites in sensors, drug delivery and tissue engineering. Subsequently focuses on the most common fabrication routes to produce piezoelectric scaffolds, tissue and sensors which is electrospinning process. Promising upcoming strategies and new piezoelectric materials and fabrication techniques for these applications are presented to enable a future integration among these applications.

Fluorinated Polymers as Smart Materials for Advanced Biomedical Applications

Fluorinated polymers constitute a unique class of materials that exhibit a combination of suitable properties for a wide range of applications, which mainly arise from their outstanding chemical resistance, thermal stability, low friction coefficients and electrical properties. Furthermore, those presenting stimuli-responsive properties have found widespread industrial and commercial applications, based on their ability to change in a controlled fashion one or more of their physicochemical properties, in response to single or multiple external stimuli such as light, temperature, electrical and magnetic fields, pH and/or biological signals. In particular, some fluorinated polymers have been intensively investigated and applied due to their piezoelectric, pyroelectric and ferroelectric properties in biomedical applications including controlled drug delivery systems, tissue engineering, microfluidic and artificial muscle actuators, among others. This review summarizes the main characteristics, microstructures and biomedical applications of electroactive fluorinated polymers.

An Injectable System for Local and Sustained Release of Antimicrobial Agents in the Periodontal Pocket

Periodontitis treatments usually require local administration of antimicrobial drugs with the aim to reduce the bacterial load inside the periodontal pocket. Effective pharmaceutical treatments may require sustained local drug release for several days in the site of interest. Currently available solutions are still not able to fulfill the clinical need for high-quality treatments, mainly in terms of release profiles and patients' comfort. This work aims to fill this gap through the development of an in situ gelling system, capable to achieve controlled and sustained release of antimicrobial agents for medium-to-long-term treatments. The system is composed of micrometer-sized β-cyclodextrin-based hydrogel (bCD-Jef-MPs), featured by a strong hydrophilic character, suspended in a synthetic block-co-polymer solution (Poloxamer 407), which is capable to undergo rapid thermally induced sol-gel phase transition at body temperature. The chemical structure of bCD-Jef-MPs was confirmed by cross-correlating data from Fourier transform infrared (FTIR) spectroscopy, swelling test, and degradation kinetics. The thermally induced sol-gel phase transition is demonstrated by rheometric tests. The effectiveness of the described system to achieve sustained release of antimicrobial agents is demonstrated in vitro, using chlorhexidine digluconate as a drug model. The results achieved in this work disclose the potential of the mentioned system in effectively treating periodontitis lesions.

A Versatile Method for the Preparation of Ferroelectric Supramolecular Materials via Radical End-Functionalization of Vinylidene Fluoride Oligomers

A synthetic method for the end-functionalization of vinylidene fluoride oligomers (OVDF) via a radical reaction between terminal olefins and I-OVDF is described. The method shows a wide substrate scope and excellent conversions, and permits the preparation of different disc-shaped cores such as benzene-1,3,5-tricarboxamides (BTAs), perylenes bisimide (PBI), and phthalocyanines (Pc) bearing three to eight ferroelectric oligomers at their periphery. The formation, purity, OVDF conformation, and morphology of the final adducts has been assessed by a combination of techniques, such as NMR, size exclusion chromatography, differential scanning calorimetry, polarized optical microscopy, and atomic force microscopy. Finally, PBI-OVDF and Pc-OVDF materials show ferroelectric hysteresis behavior together with high remnant polarizations, with values as high as Pr ≈ 37 mC/m(2) for Pc-OVDF. This work demonstrates the potential of preparing a new set of ferroelectric materials simply by attaching OVDF oligomers to different small molecules. The use of carefully chosen small molecules paves the way to new functional materials in which ferroelectricity and electrical conductivity or light-harvesting properties coexist in a single compound.

Water-soluble cationic poly(β-cyclodextrin-co-guanidine) as a controlled vitamin B2delivery carrier

Vitamin B₂(VB₂) is effectively incorporated into novel water-soluble cationic β-cyclodextrin (β-CD) polymers in order to improve its physiochemical properties.

Biodegradable poly(butylene succinate-co-terephthalate) nanofibrous membranes functionalized with cyclodextrin polymer for effective methylene blue adsorption

PBST and PBST/CDP nanofibrous membranes were prepared for the first time. PBST/CDP membranes were fabricated by means of in situ polymerization. The morphologies of membranes were dependent on the CDP content. PBST/CDP membranes exhibited excellent adsorption capacity.

Bioinspired Titanium Drug Eluting Platforms Based on a Poly-β-cyclodextrin-Chitosan Layer-by-Layer Self-Assembly Targeting Infections

In the field of implantable titanium-based biomaterials, infections and inflammations are the most common forms of postoperative complications. The controlled local delivery of therapeutics from implants through polyelectrolyte multilayers (PEMs) has recently emerged as a versatile technique that has shown great promise in the transformation of a classical medical implant into a drug delivery system. Herein, we report the design and the elaboration of new biodegradable multidrug-eluting titanium platforms based on a polyelectrolyte multilayer bioactive coating that target infections. These systems were built up in mild conditions according to the layer-by-layer (L-b-L) assembly and incorporate two biocompatible polysaccharides held together through electrostatic interactions. A synthetic, negatively charged β-cyclodextrin-based polymer (PCD), well-known for forming stable and reversible complexes with hydrophobic therapeutic agents, was exploited as a multidrug reservoir, and chitosan (CHT), a naturally occurring, positively charged polyelectrolyte, was used as a barrier for controlling the drug delivery rate. These polyelectrolyte multilayer films were strongly attached to the titanium surface through a bioinspired polydopamine (PDA) film acting as an adhesive first layer and promoting the robust anchorage of PEMs onto the biomaterials. Prior to the multilayer film deposition, the interactions between both oppositely charged polyelectrolytes, as well the multilayer growth, were monitored by employing surface plasmon resonance (SPR). Several PEMs integrating 5, 10, and 15 bilayers were engineered using the dip coating strategy, and the polyelectrolyte surface densities were estimated by colorimetric titrations and gravimetric analyses. The morphologies of these multilayer systems, as well as their naturally occurring degradation in a physiological medium, were investigated by scanning electron microscopy (SEM), and their thicknesses were measured by means of profilometry and ellipsometry studies. Finally, the ability of the coated titanium multilayer devices to act as a drug-eluting system and to treat infections was validated with gentamicin, a relevant water-soluble antibiotic commonly used in medicine due to its broad bactericidal spectrum.

Chitosan finishing nonwoven textiles loaded with silver and iodide for antibacterial wound dressing applications

Polyethylene terephtalate (PET) and Polypropylene (PP) textiles are widely used in biomedical application such as wound dressings and implants. The aim of this work was to develop an antibacterial chitosan (CHT) coating activated by silver or by iodine. Chitosan was immobilized onto PET and PP supports using citric acid (CTR) as a crosslinking agent through a pad-dry-cure textile finishing process. Interestingly, depending on the CHT/CTR molar ratio, two different systems were obtained: rich in cationic ammonium groups when the CTR concentration was 1%w/v, and rich in anionic carboxylate groups when the CTR concentration was 10%w/v. As a consequence, such samples could be selectively loaded with iodine and silver nitrate, respectively.Both types of coatings were analyzed using SEM and FTIR, their sorption capacities were evaluated toward iodide/iodate anions (I(-)/IO3(-)) and the silver cations (Ag(+)) were evaluated using elemental analysis. Finally, in vitro evaluations were carried out to evaluate the cytocompatibility on the epithelial cell line. The silver loaded textile reported a stronger antibacterial effect against E.coli (5 log10 reduction) than toward S. aureus (3 log10) while the antibacterial effect of the iodide loaded textiles was limited to 1 log10 to 2 log10 on both strains.

Mussel inspired coating of a biocompatible cyclodextrin based polymer onto CoCr vascular stents

During the past decade, drug-eluting stents (DES) have been widely used for the treatment of occlusive coronary artery diseases. They are supposed to reduce the incidence of early in-stent restenosis by the elution of highly hydrophobic antiproliferative drugs. Nevertheless, the absence of long-term activity of these devices is responsible for late acute thrombosis probably due to the delayed re-endothelialization of the arterial wall over the bare metallic stent struts. Thus, a new generation of DES with a sustained release of therapeutic agents is required to improve long-term results of these devices. In this article, we report an original functionalization of CoCr vascular devices with a hydrophilic, biocompatible and biodegradable cyclodextrins based polymer which acts as a reservoir for lipophilic drugs allowing the sustained release of antiproliferative drugs. In this setting, polydopamine (PDA), a strong adhesive biopolymer, was applied as a first coating layer onto the surface of the metallic CoCr device in order to promote the strong anchorage of a cyclodextrin polymer. This polymer was generated "in situ" from the methylated cyclodextrins and citric acid as a cross-linking agent through a polycondensation reaction. After optimization of the grafting process, the amount of cyclodextrin polymer coated onto the CoCr device was quantified by colorimetric titrations and the resulting film was characterized by scanning electron microscopy (SEM) investigations. The cytocompatibility of the resulting coated film was assessed by cell proliferation and vitality tests. Finally, the ability of this coated device to act as a drug-eluting system was evaluated with paclitaxel, a strong hydrophobic antiproliferative drug, a reference drug used in current vascular drug-eluting stents.

Cyclodextrin and maltodextrin finishing of a polypropylene abdominal wall implant for the prolonged delivery of ciprofloxacin

The aim of this work was to develop a polypropylene (PP) artificial abdominal wall implant for the prolonged release of ciprofloxacin (CFX). This sustained release effect was obtained by functionalization of the textile mesh with citric acid and hydroxypropyl-γ-cyclodextrin (HPγCD) or maltodextrin (MD). In both cases the textile finishing reaction yielded a cyclo- or malto-dextrin crosslinked polymer coating the fibers. The modified supports were characterized by thermogravimetric analysis (TGA), differential scanning calorimetry and scanning electron microscopy. The sorption capacities and the kinetics of CFX release were studied by batch tests coupled with spectrophotometric assays. Microbiological assays were carried out on Staphylococcus aureus, Staphylococcus epidermidis and Escherichia coli, while proliferation and viability tests used fibroblasts. The main results were as follows. (i) Due to the differences between the range of temperature of thermal degradation of the (cyclo)dextrins polymers and of the PP fibers TGA was a reliable method for quantifying the degree of functionalization of the textiles. (ii) Both modified supports showed improved sorption/desorption capacities for CFX, compared with the virgin mesh. The HPγCD-finished support showed an increased sorption capacity and a lower release rate of CFX compared with the MD modified support. (iii) Microbiological assays confirmed the latter result, with greater sustained antibacterial activity of the HPγCD treated support. These experiments have demonstrated the role of the cyclodextrin cavity in interactions with CFX: the antibiotic was not only adsorbed via hydrogen and acid-base interactions with the polyCTR-HPγCD network, but also via host-guest complexation. (iv) Biological tests revealed a slight decrease in fibroblast proliferation after 6 days on the modified supports, but cell viability tests showed that this was not due to toxicity of the (cyclo)dextrin polymer coatings.

Functionalization of PVDF membranes with carbohydrate derivates for the controlled delivery of chlorhexidin

Maltodextrin (MX) was fixed onto PVDF membranes in order to create a drug delivery Guided Tissue Regeneration (GTR) device with controlled drug delivery properties. PVDF microporous membranes were treated by a mixture of MX and citric acid, resulting to an 18 wt% increase of the supports. MX grafted membrane could capture 103 mg/g chlorhexidin digluconate (DigCHX) instead of 1mg/g for a virgin membrane. A neutralization step was performed before the biological tests. Viability tests confirmed the non-toxicity of the MX polymer coating after neutralisation. In vitro release test in human plasma, and microbiological tests showed that membranes grafted with MX were more performing compared to virgin and beta-CD grafted membranes. The antimicrobial activity was effective during more than 72 h.