Cornea engineering on polyester carriers

Cell loaded 3D bioprinted GelMA hydrogels for corneal stroma engineering

Tissue engineering aims to replace missing or damaged tissues and restore their functions.

Engineering topography: Effects on corneal cell behavior and integration into corneal tissue engineering

Cell-material interactions are important to tissue engineering. Inspired by the natural topographic structures on the extracellular matrix, a growing number of studies have integrated engineering topography into investigations of cell behavior on biomaterials. Engineering topography has a significant influence on cell behaviors. These cell-topography interactions play an important role in regenerative medicine and tissue engineering. Similarly, cell-topography interactions are important to corneal reconstruction and regeneration. In this review, we primarily summarized the effects of topographic cues on the behaviors of corneal cells, including cell morphology, adhesion, migration, and proliferation. Furthermore, the integration of engineering surface topography into corneal tissue engineering was also discussed.

Corneal regeneration: A review of stromal replacements

Corneal blindness is traditionally treated by transplantation of a donor cornea, or in severe cases by implantation of an artificial cornea or keratoprosthesis. Due to severe donor shortages and the risks of complications that come with artificial corneas, tissue engineering in ophthalmology has become more focused on regenerative strategies using biocompatible materials either with or without cells. The stroma makes up the bulk of the corneal thickness and mainly consists of a tightly interwoven network of collagen type I, making it notoriously difficult to recreate in a laboratory setting. Despite the challenges that come with corneal stromal tissue engineering, there has recently been enormous progress in this field. A large number of research groups are working towards developing the ideal biomimetic, cytocompatible and transplantable stromal replacement. Here we provide an overview of the approaches directed towards tissue engineering the corneal stroma, from classical collagen gels, films and sponges to less traditional components such as silk, fish scales, gelatin and polymers. The perfect stromal replacement has yet to be identified and future research should be directed at combined approaches, in order to not only host native stromal cells but also restore functionality.

STATEMENT OF SIGNIFICANCE

In the field of tissue engineering and regenerative medicine in ophthalmology the focus has shifted towards a common goal: to restore the corneal stroma and thereby provide a new treatment option for patients who are currently blind due to corneal opacification. Currently the waiting lists for corneal transplantation include more than 10 million patients, due to severe donor shortages. Alternatives to the transplantation of a donor cornea include the use of artificial cornea, but these are by no means biomimetic and therefore do not provide good outcomes. In recent years a lot of work has gone into the development of tissue engineered scaffolds and other biomaterials suitable to replace the native stromal tissue. Looking at all the different approaches separately is a daunting task and up until now there was no review article in which every approach is discussed. This review does include all approaches, from classical tissue engineering with collagen to the use of various alternative biomaterials and even fish scales. Therefore, this review can serve as a reference work for those starting in the field and but also to stimulate collaborative efforts in the future.

Mimicking corneal stroma using keratocyte-loaded photopolymerizable methacrylated gelatin hydrogels

Cell-laden methacrylated gelatin (GelMA) hydrogels with high (approximately 90%) transparency were prepared to mimic the natural form and function of corneal stroma. They were synthesized from GelMA with a methacrylation degree of 70% as determined by nuclear magnetic resonance. Hydrogels were strong enough to withstand handling. Stability studies showed that 87% of the GelMA hydrogels remained after 21 days in phosphate buffered saline (PBS). Cell viability in the first 2 days was over 90% for the human keratocytes loaded in the gels as determined with the live-dead analysis. Cells in the hydrogel elongated and connected to each other as observed by confocal laser scanning microscopy (CLSM) images and scanning electron microscope analysis after 3 weeks in the culture medium and cells were seen to be distributed throughout the hydrogel bulk. Cells were found to synthesize collagen Types I and V, decorin, and biglycan (representative collagens and proteoglycans of human corneal stroma, respectively) showing that keratocytes maintained their functions and preserved their phenotypes in the hydrogels. Transparency of cell-loaded and cell-free hydrogels after 21 days was found to be over 90% at all time points in the visible light range and was comparable to the transparency of the native cornea. The corneal stroma equivalent produced in this study that has cells entrapped in it leads to a product with homogenous distribution of cells. It was transparent at the very beginning and is expected to allow better vision than nontransparent substrates. It, therefore, has a significant potential to be used as an alternative to the current products used to treat corneal blindness.

Understanding the cell behavior on nano-/micro-patterned surfaces

Aim: This article reports on studies conducted in the same laboratory on interactions between patterned substrates with different pattern dimensions and chemistries, and various types of cells. Materials & methods: In order to compare the influence of various parameters, bone marrow stromal cells, retinal pigment epithelial cells, human corneal stromal cells (keratocytes), Saos-2 (human osteosarcoma cells), human microvascular endothelial cells and vascular smooth muscle cells were tested on surfaces with different physical patterns and chemical properties. Results: It was observed that cell type and surface topography are more influential than surface chemistry in determining the alignment tendency of a cell on a substrate surface. Low walls (several microns high) could not confine cells into the microgrooves of the films but alignment was still possible if the cells had a natural alignment property. Conclusion: This information is very useful in designing tissue engineering scaffolds and in the long-term success of implants.

Original submitted 30 November 2010; Revised submitted 4 January 2012; Published online 20 July 2012

Nanopatterning of collagen scaffolds improve the mechanical properties of tissue engineered vascular grafts

Tissue engineered constructs with cells growing in an organized manner have been shown to have improved mechanical properties. This can be especially important when constructing tissues that need to perform under load, such as cardiac and vascular tissue. Enhancement of mechanical properties of tissue engineered vascular grafts via orientation of smooth muscle cells by the help of topographical cues have not been reported yet. In the present study, collagen scaffolds with 650, 500, and 332.5 nm wide nanochannels and ridges were designed and seeded with smooth muscle cells isolated from the human saphenous vein. Cell alignment on the construct was shown by SEM and fluorescence microscopy. The ultimate tensile strength (UTS) and Young's modulus of the scaffolds were determined after 45 and 75 days. Alamar Blue assay was used to determine the number of viable cells on surfaces with different dimensioned patterns. Presence of nanopatterns increased the UTS from 0.55 +/- 0.11 to as much as 1.63 +/- 0.46 MPa, a value within the range of natural arteries and veins. Similarly, Young's modulus values were found to be around 4 MPa, again in the range of natural vessels. The study thus showed that nanopatterns as small as 332.5 nm could align the smooth muscle cells and that alignment significantly improved mechanical properties, indicating that nanopatterned collagen scaffolds have the potential for use in the tissue engineering of small diameter blood vessels.

In vitro characterization of micropatterned PLGA-PHBV8 blend films as temporary scaffolds for photoreceptor cells

In developed countries the aging population faces increasing risks of blinding retinal diseases, for which there are few effective treatments available. Photoreceptor transplantation represents one approach, but generally results have been disappointing. We hypothesize that micropatterned biodegradable poly(L-lactic acid-co-glycolic acid)/poly(hydroxybutyrate-co-hydroxyvaleric acid) (PLGA-PHBV8) blend films could deliver photoreceptor cells in a more organized manner than bolus injections. Blending of PLGA and PHBV8 was used to optimize the degradation rate of the temporary template. At the end of 8 weeks, for both thin and thick films of PLGA-PHBV8 a 50% decrease of their initial weight with increasing water uptake was observed. When photoreceptor cells were seeded onto micropatterned PLGA-PHBV8 films with parallel grooves (21- and 42-microm-wide grooves and 20 microm ridge width and depth), the cells preferred laminin-deposited grooves to ridges and expressed rod- and cone-specific markers such as rhodopsin and arrestin. A loss in photoreceptor viability of 50% was observed after 7 days in culture. The effects of either retinal pigment epithelium (RPE)-derived or Muller glial cell-derived conditioned media or bFGF on the survival of photoreceptor cells seeded on PLGA-PHBV8 films were investigated. Addition of either RPE- and Muller-conditioned media increased statistically (p < 0.01) the viability of photoreceptor cells after 7 days of incubation. Our results suggest that such biodegradable micropatterned PLGA-PHBV8 blend films have a potential to deliver photoreceptor cells to the subretinal space and ensure laminar organization and maintenance of differentiation, and that incorporation of intrinsic factors within the scaffold would enhance the survival rate of transplanted cells.

The development of a tissue-engineered cornea: biomaterials and culture methods

The field of corneal tissue engineering has made many strides in recent years. The challenges of engineering a biocompatible, mechanically stable, and optically transparent tissue are significant. To overcome these challenges, researchers have adopted two basic approaches: cell-based strategies for manipulating cells to create their own extracellular matrix, and scaffold-based strategies for providing strong and transparent matrices upon which to grow cells. Both strategies have met with some degree of success. In addition, recent advances have been made in innervating a tissue-engineered construct. Future work will need to focus on further improving mechanical stability of engineered constructs as well as improving the host response to implantation.

Influence of keratocytes and retinal pigment epithelial cells on the mechanical properties of polyester-based tissue engineering micropatterned films

In this paper the mechanical properties of micropatterned polyester films prepared to serve as tissue engineering scaffolds of cornea were examined. Films were prepared by solvent casting of blends of poly(l-lactide-co-d,l-lactide) and poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid), on a micropatterned silicon template. They were seeded with keratocytes or retinal pigment epithelial cells and subjected to tensile testing to assess the contribution of cells and the deposited extra-cellular matrix (ECM) to the mechanical properties of the scaffold. In all the tests, the films used were wet and the cells were not fixed. Cell-free scaffolds showed a gradual deterioration in strength upon incubation in the cell culture medium at 37 degrees C; the deterioration rate was highest in the first week and decreased significantly over the second and third weeks. The ultimate strength of the cell-free scaffolds decreased from 0.99 to 0.42N/mm after 21 days of incubation. Cell seeded scaffolds showed a more complicated mechanical strength profile. Their response was found to depend both on the extent of surface coverage and on the cell type. The results were examined after dividing the data into two groups of lower and higher stiffness. For keratocyte seeded scaffolds, the strength of the high stiffness groups continued to increase as the incubation period increased while the lower stiffness groups did not show a distinct change. For the keratocyte seeded scaffolds, tensile strength increased from 0.65N/mm on Day 7 to 0.73N/mm on Day 21. On the other hand, the scaffolds seeded with retinal pigment epithelial cells showed a gradual deterioration over time in both the higher and lower stiffness groups. For epithelial cell seeded scaffolds this was 0.98N/mm on Day 7 and decreased to 0.77N/mm on Day 21 still an improvement over the unseeded scaffolds. This most probably was a result of a lower rate of ECM secretion in comparison to keratocytes and the newly secreted ECM could not compensate for the influence of scaffold degradation on the mechanical properties. It could, therefore, be concluded that cell seeding plays a positive role in strengthening a tissue engineered construct, and cell type has a significant influence on the extent of this improvement.