Biosynthetic hydrogels--studies on chemical and physical characteristics on long-term cellular response for tissue engineering

Chitosan-Polyethylene Glycol Inspired Polyelectrolyte Complex Hydrogel Templates Favoring NEO-Tissue Formation for Cardiac Tissue Engineering

Neo-tissue formation and host tissue regeneration determine the success of cardiac tissue engineering where functional hydrogel scaffolds act as cardiac (extracellular matrix) ECM mimic. Translationally, the hydrogel templates promoting neo-cardiac tissue formation are currently limited; however, they are highly demanding in cardiac tissue engineering. The current study focused on the development of a panel of four chitosan-based polyelectrolyte hydrogels as cardiac scaffolds facilitating neo-cardiac tissue formation to promote cardiac regeneration. Chitosan-PEG (CP), gelatin-chitosan-PEG (GCP), hyaluronic acid-chitosan-PEG (HACP), and combined CP (CoCP) polyelectrolyte hydrogels were engineered by solvent casting and assessed for physiochemical, thermal, electrical, biodegradable, mechanical, and biological properties. The CP, GCP, HACP, and CoCP hydrogels exhibited excellent porosity (4.24 ± 0.18, 13.089 ± 1.13, 12.53 ± 1.30 and 15.88 ± 1.10 for CP, GCP, HACP and CoCP, respectively), water profile, mechanical strength, and amphiphilicity suitable for cardiac tissue engineering. The hydrogels were hemocompatible as evident from the negligible hemolysis and RBC aggregation and increased adsorption of plasma albumin. The hydrogels were cytocompatible as evident from the increased viability by MTT (>94% for all the four hydrogels) assay and direct contact assay. Also, the hydrogels supported the adhesion, growth, spreading, and proliferation of H9c2 cells as unveiled by rhodamine staining. The hydrogels promoted neo-tissue formation that was proven using rat and swine myocardial tissue explant culture. Compared to GCP and CoCP, CP and HACP were superior owing to the cell viability, hemocompatibility, and conductance, resulting in the highest degree of cytoskeletal organization and neo-tissue formation. The physiochemical and biological performance of these hydrogels supported neo-cardiac tissue formation. Overall, the CP, GCP, HACP, and CoCP hydrogel systems promise novel translational opportunities in regenerative cardiology.

Release studies of the anticancer drug 5-fluorouracil from chitosan-banana peel extract films

5-F-lourouracil is an anticancer drug used for the treatment of different types of cancers. 5-flourouracil loaded chitosan-banana peel extract films were prepared for the in vitro drug release studies. Solvent casting technique was employed to prepare the films. The structure and morphology of the prepared films were analysed by FTIR, XRD and SEM methods and confirmed the presence of drug in the films. The drug loaded films show excellent thermal stability and good shelf life. Studies revealed that the percentage of banana peel extract influences the swelling properties of the film, thickness of the films and release of the drug from the films. Increase in the concentration of chitosan and banana peel extract decreases the swelling properties of the film and rate of release of the drug from the film. The release rate of 5-fluorouracil from the drug loaded chitosan-banana peel extract films were followed spectrophotometrically at λmax 266 nm and the film derived from 1 % chitosan solution and 1 mL aqueous banana peel extract (saturated) exhibited maximum drug release. Cytotoxicity studies proved that the films are non-toxic in nature and augurs well for their applications as excellent drug delivery systems. Antimicrobial studies show that the drug loaded chitosan-banana peel extract films were found to be active against microbes E. coli, Streptococcus mutans, Staphylococcus aureus, Candida albicans and Aspergillus niger and inactive against Pseudomonas aeruginosa.

Antimicrobial effects of hydroxyapatite mosaicked polyvinyl alcohol-alginate semi-interpenetrating hydrogel-loaded with ethanolic extract of Glycyrrhiza glabra against oral pathogens

Glycyrrhiza glabra (GG) elicits protective effects against periodontal diseases. However, the sustained bioavailability of GG extract at therapeutic concentration warrants ideal delivery vehicles. Present study has focused on the design, fabrication, and evaluations of ethanolic-crude extract of GG-loaded semi-interpenetrating network (semi-IPN) hydrogel (HAAPS-GG) using alginic acid and polyvinyl alcohol (PVA) hydrogel mosaicked with HA for periodontal regeneration. The study has examined the performance of the hydrogel against the selected oral pathogens S. mutans, E. faecalis, L. acidophilus and C. albicans. HAAPS-GG was successfully fabricated and the surface functional groups were confirmed by attenuated total reflectance-infrared (ATR-IR) spectroscopy. HAAPS-GG displayed interconnecting pores, hydrophilicity and excellent water profile contributing to the biocompatibility as evident from direct contact and MTT assay in L929 fibroblasts. The hydrogel was mechanically stable and was immunocompatible owing to the relatively decreased levels of pro-inflammatory mediators COX2, 5LPO, iNOS and MPO in RAW 264.7 macrophages. In addition, the transcript analysis on RAW 264.7 revealed the down-regulation of inflammatory transcription factor NF-κβ and the pro-inflammatory cytokine TNF-α. Importantly, HAAPS-GG arrested the progression of periodontal pathogens predominantly S. mutans, and C. albicans as evident by disc diffusion assay, MTT assay and confocal microscopy. Overall, the HAAPS-GG system offers promising translational avenues in periodontal regeneration.

Infarct Zone: a Novel Platform for Exosome Trade in Cardiac Tissue Regeneration

The global incidence of coronary artery diseases (CADs), especially myocardial infarction (MI), has drastically increased in recent years. Even though the conventional therapies have improved the outcomes, the post-MI complications and the increased rate of recurrence among the survivors are still alarming. Molecular events associated with the pathogenesis and the adaptive responses of the surviving myocardium are largely unknown. Focus on exosome-mediated signaling for cell-cell/matrix communications at the infarct zone reflects an emerging opportunity in cardiac regeneration. Also, cardiac tissue engineering provides promising insights for the next generation of therapeutic approaches in the management of CADs. In this article, we critically reviewed the current understanding on the biology of cardiac exosomes, therapeutic potential of exosomes, and recent developments in cardiac tissue engineering and discussed novel translational approaches based on tissue engineering and exosomes for cardiac regeneration and CADs.

Application of Hexagonal Boron Nitride to a Heat-Transfer Medium of an InGaN/GaN Quantum-Well Green LED

Group III-nitride light-emitting diodes (LEDs) fabricated on sapphire substrates typically suffer from insufficient heat dissipation, largely due to the low thermal conductivities (TCs) of their epitaxial layers and substrates. In the current work, we significantly improved the heat-dissipation characteristics of an InGaN/GaN quantum-well (QW) green LED by using hexagonal boron nitride (hBN) as a heat-transfer medium. Multiple-layer hBN with an average thickness of 11 nm was attached to the back of an InGaN/GaN-QW LED (hBN-LED). As a reference, an LED without the hBN (Ref-LED) was also prepared. After injecting current, heat-transfer characteristics inside each LED were analyzed by measuring temperature distribution throughout the LED as a function of time. For both LED chips, the maximum temperature was measured on the edge n-type electrode brightly shining fabricated on an n-type GaN cladding layer and the minimum temperature was measured at the relatively dark-contrast top surface between the p-type electrodes. The hBN-LED took 6 s to reach its maximum temperature (136.1 °C), whereas the Ref-LED took considerably longer, specifically 11 s. After being switched off, the hBN-LED took 35 s to cool down to 37.5 °C and the Ref-LED took much longer, specifically 265 s. These results confirmed the considerable contribution of the attached hBN to the transfer and dissipation of heat in the LED. The spatial heat-transfer and distribution characteristics along the vertical direction of each LED were theoretically analyzed by carrying out simulations based on the TCs, thicknesses, and thermal resistances of the materials used in the chips. The results of these simulations agreed well with the experimental results.

Immunocompatibility of poly(ethylene glycol)-penetrated alginate–chitosan hydrogels

Scaffold-guided tissue regeneration using hydrogels has been emerging as an ideal alternative for the management of terminal-stage organ damage. Design of scaffolds for tissue regrowth mainly focuses on their immuno/biocompatibility as well as physiochemical characteristics. The focus of this study is on the biocompatibility evaluations of a panel of four hydrogel scaffolds fabricated using alginate, chitosan and hydroxyapatite reinforced with poly(ethylene glycol). The hydrogels were subsequently cross-linked with calcium ions and glutaraldehyde. Immunocompatibility was assessed by interacting Raw 264.7 cell lines with these hydrogels. MTT cell viability assay revealed the non-cytotoxic nature of the hydrogels, and the macrophages grown in contact with the hydrogels exhibited no alteration in their morphology and were similar to the untreated normal cells. The concentration of nitric oxide, activity of myeloperoxidase and the messenger ribonucleic acid transcripts of proinflammatory cytokines, interleukin 6 and tumour necrosis factor alpha exhibited no considerable increase in the macrophages cultured with the hydrogels when compared to lipopolysaccharide-stimulated cells. In short, the absence of macrophage activation on contact with hydrogels is a clear indication of their in vitro immunocompatibility, suggesting their potential application as tissue engineering templates.

Biomedical Applications of Biodegradable Polyesters

The focus in the field of biomedical engineering has shifted in recent years to biodegradable polymers and, in particular, polyesters. Dozens of polyester-based medical devices are commercially available, and every year more are introduced to the market. The mechanical performance and wide range of biodegradation properties of this class of polymers allow for high degrees of selectivity for targeted clinical applications. Recent research endeavors to expand the application of polymers have been driven by a need to target the general hydrophobic nature of polyesters and their limited cell motif sites. This review provides a comprehensive investigation into advanced strategies to modify polyesters and their clinical potential for future biomedical applications.

Poly(vinyl alcohol)/gelatin Hydrogels Cultured with HepG2 Cells as a 3D Model of Hepatocellular Carcinoma: A Morphological Study

It has been demonstrated that three-dimensional (3D) cell culture models represent fundamental tools for the comprehension of cellular phenomena both for normal and cancerous tissues. Indeed, the microenvironment affects the cellular behavior as well as the response to drugs. In this study, we performed a morphological analysis on a hepatocarcinoma cell line, HepG2, grown for 24 days inside a bioartificial hydrogel composed of poly(vinyl alcohol) (PVA) and gelatin (G) to model a hepatocellular carcinoma (HCC) in 3D. Morphological features of PVA/G hydrogels were investigated, resulting to mimic the trabecular structure of liver parenchyma. A histologic analysis comparing the 3D models with HepG2 cell monolayers and tumor specimens was performed. In the 3D setting, HepG2 cells were viable and formed large cellular aggregates showing different morphotypes with zonal distribution. Furthermore, β-actin and α5β1 integrin revealed a morphotype-related expression; in particular, the frontline cells were characterized by a strong immunopositivity on a side border of their membrane, thus suggesting the formation of lamellipodia-like structures apt for migration. Based on these results, we propose PVA/G hydrogels as valuable substrates to develop a long term 3D HCC model that can be used to investigate important aspects of tumor biology related to migration phenomena.

Hybrid amphiphilic bimodal hydrogels having mechanical and biological recognition characteristics for cardiac tissue engineering

Tissue engineering strategies rely on the favourable microniche scaffolds for 3D cell growth.