Three-dimensional porous poly(propylene fumarate)-co-poly(lactic-co-glycolic acid) scaffolds for tissue engineering

Biodegradable macromers for implant bulk and surface engineering

Macromers, polymeric molecules with at least two functional groups for cross-polymerization, are interesting materials to tailor mechanical, biochemical and degradative bulk and surface properties of implants for tissue regeneration. In this review we focus on macromers with at least one biodegradable building block. Manifold design options, such as choice of polymeric block(s), optional core molecule and reactive groups, as well as cross-co-polymerization with suitable anchor or linker molecules, allow the adaptation of macromer-based biomaterials towards specific application requirements in both hard and soft tissue regeneration. Implants can be manufactured from macromers using additive manufacturing as well as molding and templating approaches. This review summarizes and discusses the overall concept of biodegradable macromers and recent approaches for macromer processing into implants as well as techniques for surface modification directed towards bone regeneration. These aspects are reviewed including a focus on the authors' contributions to the field through research within the collaborative research project Transregio 67.

Repairing whole facial nerve defects with xenogeneic acellular nerve grafts in rhesus monkeys

Acellular nerve allografts conducted via chemical extraction have achieved satisfactory results in bridging whole facial nerve defects clinically, both in terms of branching a single trunk and in connecting multiple branches of an extratemporal segment. However, in the clinical treatment of facial nerve defects, allogeneic donors are limited. In this experiment, we exposed the left trunk and multiple branches of the extratemporal segment in six rhesus monkeys and dissected a gap of 25 mm to construct a monkey model of a whole left nerve defect. Six monkeys were randomly assigned to an autograft group or a xenogeneic acellular nerve graft group. In the autograft group, the 25-mm whole facial nerve defect was immediately bridged using an autogenous ipsilateral great auricular nerve, and in the xenogeneic acellular nerve graft group, this was done using a xenogeneic acellular nerve graft with trunk-branches. Examinations of facial symmetry, nerve-muscle electrophysiology, retrograde transport of labeled neuronal tracers, and morphology of the regenerated nerve and target muscle at 8 months postoperatively showed that the faces of the monkey appeared to be symmetrical in the static state and slightly asymmetrical during facial movement, and that they could actively close their eyelids completely. The degree of recovery from facial paralysis reached House-Brackmann grade II in both groups. Compound muscle action potentials were recorded and orbicularis oris muscles responded to electro-stimuli on the surgical side in each monkey. FluoroGold-labeled neurons could be detected in the facial nuclei on the injured side. Immunohistochemical staining showed abundant neurofilament-200-positive axons and soluble protein-100-positive Schwann cells in the regenerated nerves. A large number of mid-graft myelinated axons were observed via methylene blue staining and a transmission electron microscope. Taken together, our data indicate that xenogeneic acellular nerve grafts from minipigs are safe and effective for repairing whole facial nerve defects in rhesus monkeys, with an effect similar to that of autologous nerve transplantation. Thus, a xenogeneic acellular nerve graft may be a suitable choice for bridging a whole facial nerve defect if no other method is available. The study was approved by the Laboratory Animal Management Committee and the Ethics Review Committee of the Affiliated Wuxi No. 2 People's Hospital of Nanjing Medical University, China (approval No. 2018-D-1) on March 15, 2018.

SDF-1α/OPF/BP Composites Enhance the Migrating and Osteogenic Abilities of Mesenchymal Stem Cells

In situ cell recruitment is a promising regenerative medicine strategy with the purpose of tissue regeneration without stem cell transplantation. This chemotaxis-based strategy is aimed at ensuring a restorative environment through the release of chemokines that promote site-specific migration of healing cell populations. Stromal cell-derived factor-1α (SDF-1α) is a critical chemokine that can regulate the migration of mesenchymal stem cells (MSCs). Accordingly, here, SDF-1α-loaded microporous oligo[poly(ethylene glycol) fumarate]/bis[2-(methacryloyloxy)ethyl] phosphate composites (SDF-1α/OPF/BP) were engineered and probed. SDF-1α/OPF/BP composites were loaded with escalating SDF-1α concentrations, namely, 0 ng/ml, 50 ng/ml, 100 ng/ml, and 200 ng/ml, and were cocultured with MSC. Scratching assay, Transwell assay, and three-dimensional migration model were utilized to assess the migration response of MSCs. Immunofluorescence staining of Runx2 and osteopontin (OPN), ELISA assay of osteocalcin (OCN) and alkaline phosphatase (ALP), and Alizarin Red S staining were conducted to assess the osteogenesis of MSCs. All SDF-1α/OPF/BP composites engendered a release of SDF-1α (>80%) during the first four days. SDF-1α released from the composites significantly promoted migration and osteogenic differentiation of MSCs documented by upregulated expression of osteogenic-related proteins, ALP, Runx2, OCN, and OPN. SDF-1α at 100 ng/ml was optimal for enhanced migration and osteogenic proficiency. Thus, designed SDF-1α/OPF/BP composites were competent in promoting the homing and osteogenesis of MSCs and thus offer a promising bioactive scaffold candidate for on-demand bone tissue regeneration.

3D printed hybrid bone constructs of PCL and dental pulp stem cells loaded GelMA

Fabrication of scaffolds using polymers and then cell seeding is a routine protocol of tissue engineering applications. Synthetic polymers have adequate mechanical properties to substitute for some bone tissue, but they are generally hydrophobic and have no specific cell recognition sites, which leads to poor cell affinity and adhesion. Some natural polymers, have high cell affinity but are mechanically weak and do not have the strength required as a bone supporting material. In the present study, 3D printed hybrid scaffolds were fabricated using PCL and GelMA carrying dental pulp stem cells (DPSCs), which is printed in the gaps between the PCL struts. This cell loaded GelMA was shown to support osteoinductivity, while the PCL provided mechanical strength needed to mimic the bone tissue. 3D printed PCL/GelMA and GelMA scaffolds were highly stable during 21 days of incubation in PBS. The compressive moduli of the hybrid scaffolds were in the range of the compressive moduli of trabecular bone. DPSCs were homogeneously distributed throughout the entire hydrogel component and exhibited high cell viability in both scaffolds during 21 days of incubation. Upon osteogenic differentiation DPSCs expressed two key matrix proteins, osteopontin and osteocalcin. Alizarin red staining showed mineralized nodules, which demonstrates osteogenic differentiation of DPSCs within GelMA. This construct yielded a very high cell viability, osteogenic differentiation and mineralization comparable to cell culture without compromising mechanical strength suitable for bone tissue engineering applications. Thus, 3D printed, cell loaded PCL/GelMA hybrid scaffolds have a great potential for use in bone tissue engineering applications.

Mesenchymal stem cell spheroids incorporated with collagen and black phosphorus promote osteogenesis of biodegradable hydrogels

Mesenchymal stem cell (MSC)-spheroids have sparked significant interest in bone tissue engineering due to their resemblance to natural bone tissue, especially in terms of cell-cell and cell-extracellular matrix interactions. Many biomaterials or biomolecules have been incorporated into MSC-spheroids to enhance their osteogenic abilities. In this respect, we assessed the osteogenic responses of MSC spheroids leveraged through the unique combination of collagen and black phosphorus (BP). The MSC spheroids were successfully constructed with 6 μg/mL collagen and/or a concentration gradient (0 μg/mL, 4 μg/mL, 8 μg/mL, and 16 μg/mL) of BP and were evaluated for MSC viability and their osteogenic differentiation over a time period of 14 days. Improved MSC viability and osteogenic ability were observed for the spheroids with collagen and BP at the concentration of 4 μg/mL and 8 μg/mL. Next, blank spheroids (Control) or the optimized MSC spheroids with 6 μg/mL collagen and 4 μg/mL BP (Col+BP4) were further encapsulated into two types of hydrogel scaffolds: porous oligo[poly(ethylene glycol) fumarate] (OPF) hydrogel and hydroxyapatite-collagen I scaffold (HE-COL). The osteogenic abilities of these four groups were evaluated after 14 and 21 days of osteogenic induction. The MSC spheroids incorporated with collagen and BP implanted into OPF porous hydrogel (Col+BP/OPF) elicited a higher expression of Runx2, osteopontin, and alkaline phosphatase than blank spheroids implanted into OPF porous hydrogel (Control/OPF). Enhanced osteogenesis was also observed in the Col+BP/HE-COL group as compared to Control/HE-COL. Taken together, the results from this study showed the perspectives of collagen and BP incorporated MSC spheroids for the development of injectable cellular therapies for bone regeneration.

Two-Dimensional Black Phosphorus and Graphene Oxide Nanosheets Synergistically Enhance Cell Proliferation and Osteogenesis on 3D Printed Scaffolds

Two-dimensional (2D) materials have emerged as a new promising research topic for tissue engineering because of their ability to alter the surface properties of tissue scaffolds and thus improve their biocompatibility and cell affinity. Multiple 2D materials, such as graphene and graphene oxide (GO), have been widely reported to enhance cell adhesion and proliferation. Recently, a newly emerged black phosphorus (BP) 2D material has attracted attention in biomedical applications because of its unique mechanical and electrochemical characteristics. In this study, we investigated the synergistic effect of these two types of 2D materials on cell osteogenesis for bone tissue engineering. BP was first wrapped in negatively charged GO nanosheets, which were then adsorbed together onto positively charged poly(propylene fumarate) three-dimensional (3D) scaffolds. The increased surface area provided by GO nanosheets would enhance cell attachment at the initial stage. In addition, slow oxidation of BP nanosheets wrapped within GO layers would generate a continuous release of phosphate, an important osteoblast differentiation facilitator designed to stimulate cell osteogenesis toward the new bone formation. Through the use of 3D confocal imaging, unique interactions between cells and BP nanosheets were observed, including a stretched cell shape and the development of filaments around the BP nanosheets, along with increased cell proliferation when compared with scaffolds incorporating only one of the 2D materials. Furthermore, the biomineralization of 3D scaffolds, as well as cellular osteogenic markers, was all measured and improved on scaffolds with both BP and GO nanosheets. All these results indicate that the incorporation of 2D BP and GO materials could effectively and synergistically stimulate cell proliferation and osteogenesis on 3D tissue scaffolds.

Fumaric acid: production and separation

Fumaric acid is a valuable compound used in foods, beverages, detergents, animal feed, pharmaceuticals and miscellaneous industrial products. It is produced on a large scale by the petrochemical route but the current tendency is towards implementing "green production" and environmental friendly technologies like biotechnological production of fumaric acid using low-cost raw materials. In this context, numerous studies focus on improving the fermentation process not only by using renewable raw material and genetically modified microorganisms, but also by developing and applying different downstream techniques for easy recovery of fumaric acid from the fermented broth. This review presents the main methods for production and separation of fumaric acid, highlighting the advantages and disadvantages of these and the potential economic impact in industry.