Effect of niobium content on the microstructure and thermal properties of fluorapatite glass-ceramics

Extensive Investigation on the Effect of Niobium Insertion on the Physical and Biological Properties of 45S5 Bioactive Glass for Dental Implant

Dental implants have emerged as one of the most consistent and predictable treatments in the oral surgery field. However, the placement of the implant is sometimes associated with bacterial infection leading to its loss. In this work, we intend to solve this problem through the development of a biomaterial for implant coatings based on 45S5 Bioglass® modified with different amounts of niobium pentoxide (Nb2O5). The structural feature of the glasses, assessed by XRD and FTIR, did not change in spite of Nb2O5 incorporation. The Raman spectra reveal the Nb2O5 incorporation related to the appearance of NbO4 and NbO6 structural units. Since the electrical characteristics of these biomaterials influence their osseointegration ability, AC and DC electrical conductivity were studied by impedance spectroscopy, in the frequency range of 102–106 Hz and temperature range of 200–400 K. The cytotoxicity of glasses was evaluated using the osteosarcoma Saos-2 cells line. The in vitro bioactivity studies and the antibacterial tests against Gram-positive and Gram-negative bacteria revealed that the samples loaded with 2 mol% Nb2O5 had the highest bioactivity and greatest antibacterial effect. Overall, the results showed that the modified 45S5 bioactive glasses can be used as an antibacterial coating material for implants, with high bioactivity, being also non-cytotoxic to mammalian cells.

Bioactive glasses incorporating less-common ions to improve biological and physical properties

Bioactive glasses (BGs) have been a focus of research for over five decades for several biomedical applications. Although their use in bone substitution and bone tissue regeneration has gained important attention, recent developments have also seen the expansion of BG applications to the field of soft tissue engineering. Hard and soft tissue repair therapies can benefit from the biological activity of metallic ions released from BGs. These metallic ions are incorporated in the BG network not only for their biological therapeutic effects but also in many cases for influencing the structure and processability of the glass and to impart extra functional properties. The "classical" elements in silicate BG compositions are silicon (Si), phosphorous (P), calcium (Ca), sodium (Na), and potassium (K). In addition, other well-recognized biologically active ions have been incorporated in BGs to provide osteogenic, angiogenic, anti-inflammatory, and antibacterial effects such as zinc (Zn), magnesium (Mg), silver (Ag), strontium (Sr), gallium (Ga), fluorine (F), iron (Fe), cobalt (Co), boron (B), lithium (Li), titanium (Ti), and copper (Cu). More recently, rare earth and other elements considered less common or, some of them, even "exotic" for biomedical applications, have found room as doping elements in BGs to enhance their biological and physical properties. For example, barium (Ba), bismuth (Bi), chlorine (Cl), chromium (Cr), dysprosium (Dy), europium (Eu), gadolinium (Gd), ytterbium (Yb), thulium (Tm), germanium (Ge), gold (Au), holmium (Ho), iodine (I), lanthanum (La), manganese (Mn), molybdenum (Mo), nickel (Ni), niobium (Nb), nitrogen (N), palladium (Pd), rubidium (Rb), samarium (Sm), selenium (Se), tantalum (Ta), tellurium (Te), terbium (Tb), erbium (Er), tin (Sn), tungsten (W), vanadium (V), yttrium (Y) as well as zirconium (Zr) have been included in BGs. These ions have been found to be particularly interesting for enhancing the biological performance of doped BGs in novel compositions for tissue repair (both hard and soft tissue) and for providing, in some cases, extra functionalities to the BG, for example fluorescence, luminescence, radiation shielding, anti-inflammatory, and antibacterial properties. This review summarizes the influence of incorporating such less-common elements in BGs with focus on tissue engineering applications, usually exploiting the bioactivity of the BG in combination with other functional properties imparted by the presence of the added elements.

Current Applications of Biopolymer-based Scaffolds and Nanofibers as Drug Delivery Systems

BACKGROUND

The high surface-to-volume ratio of polymeric nanofibers makes them an effective vehicle for the release of bioactive molecules and compounds such as growth factors, drugs, herbal extracts and gene sequences. Synthetic polymers are commonly used as sensors, reinforcements and energy storage, whereas natural polymers are more prone to mimicking an extracellular matrix. Natural polymers are a renewable resource and classified as an environmentally friendly material, which might be used in different techniques to produce nanofibers for biomedical applications such as tissue engineering, implantable medical devices, antimicrobial barriers and wound dressings, among others. This review sheds some light on the advantages of natural over synthetic polymeric materials for nanofiber production. Also, the most important techniques employed to produce natural nanofibers are presented. Moreover, some pieces of evidence regarding toxicology and cell-interactions using natural nanofibers are discussed. Clearly, the potential extrapolation of such laboratory results into human health application should be addressed cautiously.

Fabrication of electrospun poly(lactic acid) nanoporous membrane loaded with niobium pentoxide nanoparticles as a potential scaffold for biomaterial applications

Tissue engineering aims to regenerate and restore damaged human organs and tissues using scaffolds that can mimic the native tissues. The requirement for modern and efficient biomaterials that are capable of accelerating the healing process has been considerably increased. In this work, a novel electrospun poly(lactic acid) (PLA) nanoporous membrane incorporated with niobium pentoxide nanoparticles (Nb₂ O₅ ) for biomaterial applications was developed. Nb₂ O₅ nanoparticles were obtained by microwave-assisted hydrothermal synthesis, and different concentrations (0, 1, 3, and 5% wt/wt) were tested. Chemical, morphological, mechanical, and biological properties of membranes were evaluated. Cell viability results demonstrated that the membranes presented nontoxic effects. The incorporation of Nb₂ O₅ improved cell proliferation without impairing the wettability, porosity, and mechanical properties of membranes. Membranes containing Nb₂ O₅ nanoparticles presented biocompatible properties with suitable porosity, which facilitated cell attachment and proliferation while allowing diffusion of oxygen and nutrients. This study has demonstrated that Nb₂ O₅ nanoparticle-loaded electrospun PLA nanoporous membranes are potential candidates for drug delivery and wound dressing applications.

Osteogenic differentiation of bone marrow-derived mesenchymal stem cells on anodized niobium surface

Currently, titanium and its alloys are the most used materials for biomedical applications. However, because of the high costs of these metals, new materials, such as niobium, have been researched. Niobium appears as a promising material due to its biocompatibility, and excellent corrosion resistance. In this work, anodized niobium samples were produced and characterized. Their capacity to support the osteogenic differentiation of bone marrow-derived mesenchymal stem cells (BM-MSCs) was also tested. The anodized niobium samples were characterized by SEM, profilometry, XPS, and wettability. BM-MSCs were cultured on the samples during 14 days, and tested for cell adhesion, metabolic activity, alkaline phosphatase activity, and mineralization. Results demonstrated that anodization promotes the formation of a hydrophilic nanoporous oxide layer on the Nb surface, which can contribute to the increase in the metabolic activity, and in osteogenic differentiation of BM-MSCs, as well as to the extracellular matrix mineralization.

Niobium pentoxide and hydroxyapatite particle loaded electrospun polycaprolactone/gelatin membranes for bone tissue engineering

Effective methods of accelerating the bone regeneration healing process are in demand for a number of bone-related diseases and trauma. This work developed scaffolds with improved properties for bone tissue engineering by electrospinning composite polycaprolactone-gelatin-hydroxyapatite-niobium pentoxide (PGHANb) membranes. Composite membranes, with average fiber diameters ranging from 123 to 156 nm, were produced by adding hydroxyapatite (HA) and varying concentrations of niobium pentoxide (Nb₂O₅) particles (0, 3, 7, and 10 wt%) to a polycaprolactone (PCL) and gelatin (GL) matrix prior to electrospinning. The morphology, mechanical, chemical and biological properties of resultant membranes were evaluated. Bioactivity was assessed using simulated body fluid (SBF) and it confirmed that the presence of particles induced the formation of hydroxyapatite crystals on the surface of the membranes. Samples were hydrophilic and cell metabolism results showed that the niobium-containing membranes were non-toxic while improving cell proliferation and differentiation compared to controls. This study demonstrated that electrospun membranes containing HA and Nb₂O₅ particles have potential to promote cell adhesion and proliferation while exhibiting bioactive properties. PGHANb membranes are promising candidates for bone tissue engineering applications.

Comprehensive in vitro and in vivo studies of novel melt-derived Nb-substituted 45S5 bioglass reveal its enhanced bioactive properties for bone healing

The present work presents and discusses the results of a comprehensive study on the bioactive properties of Nb-substituted silicate glass derived from 45S5 bioglass. In vitro and in vivo experiments were performed. We undertook three different types of in vitro analyses: (i) investigation of the kinetics of chemical reactivity and the bioactivity of Nb-substituted glass in simulated body fluid (SBF) by 31P MASNMR spectroscopy, (ii) determination of ionic leaching profiles in buffered solution by inductively coupled plasma optical emission spectrometry (ICP-OES), and (iii) assessment of the compatibility and osteogenic differentiation of human embryonic stem cells (hESCs) treated with dissolution products of different compositions of Nb-substituted glass. The results revealed that Nb-substituted glass is not toxic to hESCs. Moreover, adding up to 1.3 mol% of Nb2O5 to 45S5 bioglass significantly enhanced its osteogenic capacity. For the in vivo experiments, trial glass rods were implanted into circular defects in rat tibia in order to evaluate their biocompatibility and bioactivity. Results showed all Nb-containing glass was biocompatible and that the addition of 1.3 mol% of Nb2O5, replacing phosphorous, increases the osteostimulation of bioglass. Therefore, these results support the assertion that Nb-substituted glass is suitable for biomedical applications.

Strontium-releasing fluorapatite glass-ceramics: Crystallization behavior, microstructure, and solubility

The purpose of this work was to investigate the effect of strontium partial replacement for calcium on the crystallization behavior, microstructure and solubility of fluorapatite glass-ceramics. Four glass compositions were prepared with increasing amounts of strontium partially replacing calcium. The crystallization behavior was analyzed by differential scanning calorimetry and X-ray diffraction (XRD). The microstructure was investigated by scanning electron microscopy. The chemical solubility was quantified according to ISO standard 10993-14. The amount of strontium released in solution after incubation in TRIS-HCl or citric acid buffer was measured by atomic absorption spectroscopy. XRD analyses revealed that partially substituted strontium-fluorapatite and strontium-åkermanite crystallized after strontium additions. The lattice cell volume of both phases increased linearly with the amount of strontium in the composition. Strontium additions led to a reduction in crystal size and an increase in crystal number density. The chemical solubility and amount of strontium released in solution increased linearly with the amount of strontium present in the composition in both TRIS-HCl and citric acid buffers. Total amounts of strontium released reached a maximum of 547 ± 80 ppm in TRIS-HCl and 1252 ± 290 ppm in citric acid buffer for the glass composition with the highest amount of strontium. For all strontium-containing compositions, the amount released in TRIS-HCl continued to increase between 70 and 120 h, indicating sustained release rather than burst release. © 2017 Wiley Periodicals, Inc. J Biomater Res Part B: 106B: 1421-1430, 2018.

Niobium-Doped Hydroxyapatite Bioceramics: Synthesis, Characterization and In Vitro Cytocompatibility

Doping calcium phosphates with ionic species can play an important role in biological responses promoting alkaline phosphatase activity, and, therefore inducing the generation of new bone. Thus, in this study, the synthesis of niobium-doped hydroxyapatite (Nb-HA) nanosize particles obtained by the precipitation process in aqueous media followed by thermal treatment is presented. The bioceramics were extensively characterized by X-ray diffraction, wavelength dispersive X-ray fluorescence spectrometry, Fourier transform infrared spectroscopy, scanning electron microscopy/energy dispersive X-ray spectroscopy analysis, transmission electron microscopy, atomic force microscopy and thermal analysis regarding their chemical composition, structure and morphology. The results showed that the precipitate dried at 110 °C was composed of amorphous calcium phosphate and HA, with polidisperse particles ranging from micro to nano dimensions. After the thermal treatment at 900 °C, the bioceramic system evolved predominantly to HA crystalline phase, with evident features of particle sintering and reduction of surface area. Moreover, the addition of 10 mol% of niobium salt precursor during the synthesis indicated the complete incorporation of the Nb(V) species in the HA crystals with detectable changes in the original lattice parameters. Furthermore, the incorporation of Nb ions caused a significant refinement on the average particle size of HA. Finally, the preliminary cytocompatibility response of the biomaterials was accessed by human osteoblast cell culture using MTT and resazurin assays, which demonstrated no cytotoxicity of the Nb-alloyed hydroxyapatite. Thus, these findings seem promising for developing innovative Nb-doped calcium phosphates as artificial biomaterials for potential use in bone replacements and repair.

Influence of addition of calcium oxide on physicochemical properties of Portland cement with zirconium or niobium oxide

Context:

Calcium oxide (CaO) may be added to mineral trioxide aggregate (MTA) or Portland cement (PC) to improve physicochemical and biological properties.

Aims:

To evaluate the physicochemical properties of PC associated with radiopacifiers and CaO.

Materials and Methods:

MTA Angelus, PC + 30% zirconium oxide (Zr), or 30% niobium oxide (Nb) associated with 10 or 20% of CaO were evaluated. Gilmore needles were used to evaluate initial and final setting time. Compressive strength was evaluated after the periods of 24 hours and 21 days. pH was analyzed after 3, 12, 24 hours, 7, 14, 21 days. Solubility and flow tests were performed based on the ISO 6876. The data obtained were submitted to analysis of variance and Tukey tests (P ≤ 0.05).

Results:

The associations with 10% CaO showed greater strength that the associations with 20% CaO. The shortest initial setting time was observed for the association PC + Zr + 20% CaO and MTA. All the cements presented alkaline pH. The flow of all cements was similar. The highest solubility was found in the associations with 20% CaO.

Conclusion:

The addition of CaO to PC favored the alkaline property and the PC + Zr + 20% CaO presented setting time similar to MTA.

Calcium Silicate-Based Cements Associated with Micro- and Nanoparticle Radiopacifiers: Physicochemical Properties and Bioactivity

Objective. The aim of this study was to evaluate the physicochemical properties and bioactivity of two formulations of calcium silicate-based cements containing additives (CSCM) or resin (CSCR), associated with radiopacifying agents zirconium oxide (ZrO2) and niobium oxide (Nb2O5) as micro- and nanoparticles; calcium tungstate (CaWO4); and bismuth oxide (Bi2O3). MTA Angelus was used as control. Methods. Surface features and bioactivity were evaluated by scanning electron microscopy and the chemical composition by energy dispersive X-ray spectrometry (EDS-X). Results. CSCM and CSCR presented larger particle sizes than MTA. Hydroxyapatite deposits were found on the surface of some materials, especially when associated with the radiopacifier with ZrO2 nanoparticles. All the cements presented calcium, silicon, and aluminum in their composition. Conclusion. Both calcium silicate-based cements presented composition and bioactivity similar to MTA when associated with the radiopacifiers evaluated.

Low temperature sintering of fluorapatite glass-ceramics

Fluorapatite glass-ceramics have been shown to be excellent candidates as scaffold materials for bone grafts, however, scaffold production by sintering is hindered by concurrent crystallization of the glass. Objective, our goal was to investigate the effect of Ca/Al ratio on the sintering behavior of Nb-doped fluorapatite-based glasses in the SiO2-Al2O3-P2O5-MgO-Na2O-K2O-CaO-CaF2 system. Methods, glass compositions with Ca/Al ratio of 1 (A), 2 (B), 4 (C) and 19 (D) were prepared by twice melting at 1525°C for 3h. Glasses were either cast as cylindrical ingots or ground into powders. Disk-shaped specimens were prepared by either sectioning from the ingots or powder-compacting in a mold, followed by heat treatment at temperatures ranging between 700 and 1050°C for 1h. The density was measured on both sintered specimens and heat treated discs as controls. The degree of sintering was determined from these measurements. Results and Significance XRD showed that fluorapatite crystallized in all glass-ceramics. A high degree of sintering was achieved at 775°C for glass-ceramic D (98.99±0.04%), and 900°C for glass-ceramic C (91.31±0.10). Glass-ceramics A or B were only partially sintered at 1000°C (63.6±0.8% and 74.1±1.5%, respectively). SEM revealed a unique microstructure of micron-sized spherulitic fluorapatite crystals in glass-ceramics C and D. Increasing the Ca/Al ratio promoted low temperature sintering of fluorapatite glass-ceramics, which are traditionally difficult to sinter.

Effect of crystallization heat treatment on the microstructure of niobium-doped fluorapatite glass-ceramics

Our goal was to study the effect of heat treatment temperature and heating rate on the microstructure and crystalline phases and assess the domain of existence of submicrometer fluorapatite crystals in niobium-doped fluorapatite glass-ceramics for biomedical applications. Glass-ceramic specimens were prepared by casting and heat treatment between 700 and 1200°C using a fast or a slow heating rate. The microstructure was characterized by atomic force microscopy and scanning electron microscopy. Crystalline phases were analyzed by x-ray diffraction. AFM of the as-cast glass revealed that amorphous phase separation occurred in this system. XRD confirmed the presence of fluorapatite in all specimens, together with forsterite and enstatite at higher temperatures. Both heating rate and heat treatment temperature strongly influenced microstructure and crystallinity. A dual microstructure with submicrometer fluorapatite crystals and polygonal forsterite crystals was obtained when slow heating rates and crystallization temperatures between 950 and 1100°C were used. Needle-shaped fluorapatite crystals appeared after heat treatment above 1100°C. Fast heating rates led to an increase in crystal size. Heat treatment temperatures should remain below 1100°C, together with slow heating rates, to prevent crystal dissolution, and preserve a dual microstructure of finely dispersed submicrometer crystals without growth of needle-shaped crystals.

Differentiation of human mesenchymal stem cells on niobium-doped fluorapatite glass-ceramics

OBJECTIVE

Our goal was to characterize the response of human mesenchymal stem cells (hMSCs) to a niobium-doped fluorapatite-based glass-ceramic (FAp).

METHODS

The glass was prepared by twice melting at 1525 °C for 3 h, and cast into cylindrical ingots later sectioned into discs and heat-treated to promote crystallization of fluorapatite submicrometer crystals. Tissue culture polystyrene (TCP) was used as control. The surface of the FAp discs was either left as-heat treated, ground or etched. Initial cell attachment was assessed at 3 h. Proliferation and alkaline phosphatase (ALP) expression data were collected at days 1, 4, and 8. Cell morphology was examined using SEM, at days 2 and 4. Mineralization was evaluated by Alizarin Red staining and SEM.

RESULTS

Initial cell attachment on as heat-treated, etched, or ground surfaces was similar to that of the positive control group (p>0.05). The percentage of area covered by living cells increased significantly on as heat-treated, etched, or ground surfaces between days 1 and 8 (p<0.05). There was no significant difference among groups in cell coverage at day 8, compared to TCP control. SEM revealed well spread polygonal cells with numerous filopodia, either attached to the ceramic surface or connected to neighboring cells. ALP expression at day 8 was significantly higher in osteogenic media compared to growth media on both FAp and control. FAp discs stained positively with Alizarin Red and calcium-rich mineralized granules associated with fibrils were observed by SEM at day 35.

SIGNIFICANCE

hMSCs displayed excellent attachment, proliferation, and differentiation on niobium-doped FAp glass-ceramic.