Behavior of human osteoblast-like cells in contact with electrodeposited calcium phosphate coatings

Advanced surface engineering of titanium materials for biomedical applications: From static modification to dynamic responsive regulation

Titanium (Ti) and its alloys have been widely used as orthopedic implants, because of their favorable mechanical properties, corrosion resistance and biocompatibility. Despite their significant success in various clinical applications, the probability of failure, degradation and revision is undesirably high, especially for the patients with low bone density, insufficient quantity of bone or osteoporosis, which renders the studies on surface modification of Ti still active to further improve clinical results. It is discerned that surface physicochemical properties directly influence and even control the dynamic interaction that subsequently determines the success or rejection of orthopedic implants. Therefore, it is crucial to endow bulk materials with specific surface properties of high bioactivity that can be performed by surface modification to realize the osseointegration. This article first reviews surface characteristics of Ti materials and various conventional surface modification techniques involving mechanical, physical and chemical treatments based on the formation mechanism of the modified coatings. Such conventional methods are able to improve bioactivity of Ti implants, but the surfaces with static state cannot respond to the dynamic biological cascades from the living cells and tissues. Hence, beyond traditional static design, dynamic responsive avenues are then emerging. The dynamic stimuli sources for surface functionalization can originate from environmental triggers or physiological triggers. In short, this review surveys recent developments in the surface engineering of Ti materials, with a specific emphasis on advances in static to dynamic functionality, which provides perspectives for improving bioactivity and biocompatibility of Ti implants.

The shape-effect of calcium phosphate nanoparticle based films on their osteogenic properties

Calcium phosphates (CaPs) in the form of hydroxyapatite (HA) have been extensively studied in the context of bone regeneration due to their chemical similarity to natural bone mineral. While HA is known to promote osteogenic differentiation, the structural properties of the ceramic have been shown to affect the extent of this effect; several studies have suggested that nanostructured HA can improve the bioactivity. However, the role shape plays in the osteogenic potential is more elusive. Here we studied the effect of HA nanoparticle shape on the ability to induce osteogenesis in human mesenchymal stromal cells (hMSCs) by developing nanoparticle films using needle-, rice- and spherical-shaped HA. We showed that the HA films made from all three shapes of nanoparticles induced increased levels of osteogenic markers (i.e. runt-related transcription factor 2 (RUNX2), bone morphogenetic protein 2 (BMP2), alkaline phosphatase (ALP), osteopontin (OPN), osteocalcin (OCN) on protein and gene level in comparison to hMSCs cultured on cover glass slides. Furthermore, their expression levels and profiles differed significantly as a function of nanoparticle shape. We also showed that nanoparticle films were more efficient in inducing osteogenic gene expression in hMSCs compared to adding nanoparticles to hMSCs in culture media. Finally, we demonstrated that hMSC morphology upon adhesion to the HA nanoparticle films is dependent on nanoparticle shape, with hMSCs exhibiting a more spread morphology on needle-shaped nanoparticle films compared to hMSCs seeded on rice- and spherical-shaped nanoparticle films. Our data suggests that HA nanoparticle films are efficient in inducing hMSC osteogenesis in basic cell culture conditions and that nanoparticle shape plays a vital role in cell adhesion and morphology and extent of induction of osteogenic differentiation.

Biological Effects of Titanium Surface Charge with a Focus on Protein Adsorption

The effect of changes in surface charge on the biological properties of implants is not clear. The objective of this study was to evaluate the biological properties of the surface of titanium sheets with different charges due to different treatment methods. Titanium sheets were sandblasted with large grit and underwent acid etching before being subsequently divided into the following groups: SLA, no further treatment; SLA-Ca²⁺, immersed in 1% CaCl₂ solution; SLA-NaCl, immersed in saline; and SLA-Ca²⁺-NaCl, immersed in 1% CaCl₂ solution followed by saline. Surface characteristics were evaluated using field-emission scanning electron microscopy with energy-dispersive spectrometry, surface profilometry, and contact angle assays. Additionally, we used a ζ-potential analyzer to directly measure the electrostatic charge on the different group surfaces. The effect of changes in the Ti surface on biological processes after different treatments was determined by analyzing fibronectin adsorption, osteoblast-like MG63 cell adhesion and proliferation, and the expression of osteogenesis-related genes. Compared to the SLA surface, the other three groups contained corresponding trace elements because they were soaked in different liquids; the contact angles of the three groups were not significantly different, but they were significantly smaller than that of the SLA group; and there was no change in the surface topography or roughness. Furthermore, the SLA-Ca²⁺ group had a significantly reduced negative charge compared to that of the other three groups. There were no differences between the SLA-NaCl and SLA-Ca²⁺-NaCl groups in terms of negative charge, and the SLA group surface carried the most negative charge. Fibronectin adsorption capacity and cytological performance testing further showed that the SLA-Ca²⁺ group had the most significant change, followed by the SLA-NaCl and SLA-Ca²⁺-NaCl groups; the SLA group had significantly lower capacity and performance than the other three groups. These results suggest that the surface charge of the titanium sheet changed when immersed in different liquids and that this treatment enhanced biocompatibility by reducing the electrostatic repulsion between biomaterials and biomolecules.

Significance of calcium phosphate coatings for the enhancement of new bone osteogenesis--a review

A systematic analysis of results available from in vitro, in vivo and clinical trials on the effects of biocompatible calcium phosphate (CaP) coatings is presented. An overview of the most frequently used methods to prepare CaP-based coatings was conducted. Dense, homogeneous, highly adherent and biocompatible CaP or hybrid organic/inorganic CaP coatings with tailored properties can be deposited. It has been demonstrated that CaP coatings have a significant effect on the bone regeneration process. In vitro experiments using different cells (e.g. SaOS-2, human mesenchymal stem cells and osteoblast-like cells) have revealed that CaP coatings enhance cellular adhesion, proliferation and differentiation to promote bone regeneration. However, in vivo, the exact mechanism of osteogenesis in response to CaP coatings is unclear; indeed, there are conflicting reports of the effectiveness of CaP coatings, with results ranging from highly effective to no significant or even negative effects. This review therefore highlights progress in CaP coatings for orthopaedic implants and discusses the future research and use of these devices. Currently, an exciting area of research is in bioactive hybrid composite CaP-based coatings containing both inorganic (CaP coating) and organic (collagen, bone morphogenetic proteins, arginylglycylaspartic acid etc.) components with the aim of promoting tissue ingrowth and vascularization. Further investigations are necessary to reveal the relative influences of implant design, surgical procedure, and coating characteristics (thickness, structure, topography, porosity, wettability etc.) on the long-term clinical effects of hybrid CaP coatings. In addition to commercially available plasma spraying, other effective routes for the fabrication of hybrid CaP coatings for clinical use still need to be determined and current progress is discussed.

Application of calcium phosphate materials in dentistry

Calcium phosphate materials are similar to bone in composition and in having bioactive and osteoconductive properties. Calcium phosphate materials in different forms, as cements, composites, and coatings, are used in many medical and dental applications. This paper reviews the applications of these materials in dentistry. It presents a brief history, dental applications, and methods for improving their mechanical properties. Notable research is highlighted regarding (1) application of calcium phosphate into various fields in dentistry; (2) improving mechanical properties of calcium phosphate; (3) biomimetic process and functionally graded materials. This paper deals with most common types of the calcium phosphate materials such as hydroxyapatite and tricalcium phosphate which are currently used in dental and medical fields.

Ectopic bone formation by 3D porous calcium phosphate-Ti6Al4V hybrids produced by perfusion electrodeposition

Successful clinical repair of non-healing skeletal defects requires the use of bone substitutes with robust bone inductivity and excellent biomechanical stability. Thus, three-dimensionally functionalised porous calcium phosphate-Ti6Al4V (CaP-Ti) hybrids were produced by perfusion electrodeposition, and the in vitro and in vivo biological performances were evaluated using human periosteum derived cells (hPDCs). By applying various current densities at the optimised deposition conditions, CaP coatings with sub-micrometer to nano-scale porous crystalline structures and different ion dissolution kinetics were deposited on the porous Ti6Al4V scaffolds. These distinctive physicochemical properties caused a significant impact on in vitro proliferation, osteogenic differentiation, and matrix mineralisation of hPDCs. This includes a potential role of hPDCs in mediating osteoclastogenesis for the resorption of CaP coatings, as indicated by a significant down-regulation of osteoprotegerin (OPG) gene expression and by the histological observation of abundant multi-nucleated giant cells near to the coatings. By subcutaneous implantation, the produced hybrids induced ectopic bone formation, which was highly dependent on the physicochemical properties of the CaP coating (including the Ca(2+) dissolution kinetics and coating surface topography), in a cell density-dependent manner. This study provided further insight on stem cell-CaP biomaterial interactions, and the feasibility to produced bone reparative units that are predictively osteoinductive in vivo by perfusion electrodeposition technology.

Perfusion electrodeposition of calcium phosphate on additive manufactured titanium scaffolds for bone engineering

A perfusion electrodeposition (P-ELD) system was reported to functionalize additive manufactured Ti6Al4V scaffolds with a calcium phosphate (CaP) coating in a controlled and reproducible manner. The effects and interactions of four main process parameters - current density (I), deposition time (t), flow rate (f) and process temperature (T) - on the properties of the CaP coating were investigated. The results showed a direct relation between the parameters and the deposited CaP mass, with a significant effect for t (P=0.001) and t-f interaction (P=0.019). Computational fluid dynamic analysis showed a relatively low electrolyte velocity within the struts and a high velocity in the open areas within the P-ELD chamber, which were not influenced by a change in f. This is beneficial for promoting a controlled CaP deposition and hydrogen gas removal. Optimization studies showed that a minimum t of 6 h was needed to obtain complete coating of the scaffold regardless of I, and the thickness was increased by increasing I and t. Energy-dispersive X-ray and X-ray diffraction analysis confirmed the deposition of highly crystalline synthetic carbonated hydroxyapatite under all conditions (Ca/P ratio=1.41). High cell viability and cell-material interactions were demonstrated by in vitro culture of human periosteum derived cells on coated scaffolds. This study showed that P-ELD provides a technological tool to functionalize complex scaffold structures with a biocompatible CaP layer that has controlled and reproducible physicochemical properties suitable for bone engineering.

Synthesis, mechanical and biological characterization of ionic doped carbonated hydroxyapatite/β-tricalcium phosphate mixtures

The influence of ionic substituents in calcium phosphates intended for bone and tooth replacement biomedical applications is an important research topic, owing to the essential roles played by trace elements in biological processes. The present study investigates the mechanical and biological evaluation of ionic doped hydroxyapatite/β-tricalcium phosphate mixtures which have been prepared by a simple aqueous precipitation method. Heat treating the resultant calcium phosphates in a carbonated atmosphere led to the formation of ionic doped carbonated hydroxyapatite/β-tricalcium phosphate mixtures containing the essential ions of biological apatite. The structural analysis determined by Rietveld refinement confirmed the presence of hydroxyapatite as the main phase, together with a considerable amount of β-tricalcium phosphate. Such phase assemblage is essentially due to the influence of substituted ions during synthesis. The results from mechanical tests proved that carbonate substitutions are detrimental for the mechanical properties of apatite-based ceramics. In vitro proliferation assays of osteoblastic-like cells (MC3T3-E1 cell line) to powders revealed that carbonate incorporation can either delay or accelerate MC3T3 proliferation, although reaching the same proliferation levels as control cells after 2 weeks in culture. Further, the powders enable pre-osteoblastic differentiation in a similar manner to control cells, as indirectly measured by ALP activity and Type-I collagen medium secretion.

The effect of novel fluorapatite surfaces on osteoblast-like cell adhesion, growth, and mineralization

There is increasing demand for biomedical implants to correct skeletal defects caused by trauma, disease, or genetic disorder. In this study, the MG-63 cells were grown on metals coated with ordered and disordered fluorapatite (FA) crystal surfaces to study the biocompatibility, initial cellular response, and the underlying mechanisms during this process. The long-term growth and mineralization of the cells were also investigated. After 3 days, the cell numbers on etched metal surface are significantly higher than those on the ordered and disordered FA surfaces, but the initial adherence of a greater number of cells did not lead to earlier mineral formation at the cell-implant interface. Of the 84 cell adhesion and matrix-focused pathway genes, an up- or down-regulation of a total of 15 genes such as integrin molecules, integrin alpha M and integrin alpha 7 and 8 was noted, suggesting a modulating effect on these adhesion molecules by the ordered FA surface compared with the disordered. Osteocalcin expression and the mineral nodule formation are most evident on the FA surfaces after osteogenic induction (OI) for 7 weeks. The binding of the ordered FA surfaces to the metal, with and without OI, was significantly higher than that of the disordered FA surfaces with OI. Most significantly, even without the OI supplement, the MG-63 cells grown on FA crystal surfaces start to differentiate and mineralize, suggesting that the FA crystal could be a simple and bioactive implant coating material.

Controlling cell behavior through the design of polymer surfaces

Polymers have gained a remarkable place in the biomedical field as materials for the fabrication of various devices and for tissue engineering applications. The initial acceptance or rejection of an implantable device is dictated by the crosstalk of the material surface with the bioentities present in the physiological environment. Advances in microfabrication and nanotechnology offer new tools to investigate the complex signaling cascade induced by the components of the extracellular matrix and consequently allow cellular responses to be tailored through the mimicking of some elements of the signaling paths. Patterning methods and selective chemical modification schemes at different length scales can provide biocompatible surfaces that control cellular interactions on the micrometer and sub-micrometer scales on which cells are organized. In this review, the potential of chemically and topographically structured micro- and nanopolymer surfaces are discussed in hopes of a better understanding of cell-biomaterial interactions, including the recent use of biomimetic approaches or stimuli-responsive macromolecules. Additionally, the focus will be on how the knowledge obtained using these surfaces can be incorporated to design biocompatible materials for various biomedical applications, such as tissue engineering, implants, cell-based biosensors, diagnostic systems, and basic cell biology. The review focusses on the research carried out during the last decade.

Study of hydroxyapatite osteoinductivity with an osteogenic differentiation of mesenchymal stem cells

Osteoinductivity of hydroxyapatite (HA) was investigated using uncommitted pluripotent mouse stem cells, C3H10T1/2 in an in vitro differentiation assay. For comparative analysis, the cells were cultured on substrates made of osteoinductive HA, with biocompatible titanium and plastics as the negative control. HA exhibited the ability to induce expression of osteo-specific genes in C3H10T1/2, including alkaline phosphatase (ALP), type I collagen, and osteocalcin; compared with its insignificant up-regulation of the same genes in osteoblast-like cells, Saos-2. HA osteoinductivity exhibited in C3H10T1/2 was comparable to that of a bone morphogenetic protein (BMP) with reference to the up-regulation of osteo-specific genes except the core binding factor 1 (Cbfa1, Runx). This result implies a difference in osteogenic induction pathway initiated by HA and BMP. Using this mesenchymal stem cells (MSC) culture assay, osteoinductivity was also demonstrated to be present in the conditioned medium derived from MSC cultured on HA substrates. This conditioned medium exhibited excellent ability to up-regulate ALP in the absence of HA and BMP. The results suggest that the HA can interact with the cells and generate potent inductive substance released into the medium. Such substance in turn is able to induce uncommitted cells to differentiate into the osteolineage.