Antibacterial property expressed by a novel calcium phosphate glass

Bactericidal and Biocompatible Properties of Plasma Chemical Oxidized Titanium (TiOB®) with Antimicrobial Surface Functionalization

Coating of plasma chemical oxidized titanium (TiOB^®) with gentamicin-tannic acid (TiOB^® gta) has proven to be efficient in preventing bacterial colonization of implants. However, in times of increasing antibiotic resistance, the development of alternative antimicrobial functionalization strategies is of major interest. Therefore, the aim of the present study is to evaluate the antibacterial and biocompatible properties of TiOB^® functionalized with silver nanoparticles (TiOB^® SiOx Ag) and ionic zinc (TiOB^® Zn). Antibacterial efficiency was determined by agar diffusion and proliferation test on Staphylocuccus aureus. Cytocompatibility was analyzed by direct cultivation of MC3T3-E1 cells on top of the functionalized surfaces for 2 and 4 d. All functionalized surfaces showed significant bactericidal effects expressed by extended lag phases (TiOB^® gta for 5 h, TiOB^® SiOx Ag for 8 h, TiOB^® Zn for 10 h). While TiOB^® gta (positive control) and TiOB^® Zn remained bactericidal for 48 h, TiOB^® SiOx Ag was active for only 4 h. After direct cultivation for 4 d, viable MC3T3-E1 cells were found on all surfaces tested with the highest biocompatibility recorded for TiOB^® SiOx Ag. The present study revealed that functionalization of TiOB^® with ionic zinc shows bactericidal properties that are comparable to those of a gentamicin-containing coating.

Calcium release and physical properties of modified carbonate apatite cement as pulp capping agent in dental application

Background

Carbonate apatite (CO₃Ap) and silica-calcium phosphate composite (SCPC) are bone substitutes with good prospect for dental application. SCPC creates a hydroxyapatite surface layer and stimulate bone cell function while, CO₃Ap induce apatite crystal formation with good adaptation providing good seal between cement and the bone. Together, these materials will add favorable properties as a pulp capping material to stimulate mineral barrier and maintain pulp vitality. The aim of this study is to investigate modification of CO₃Ap cement combined with SCPC, later term as CO₃Ap-SCPC cement (CAS) in means of its chemical (Calcium release) and physical properties (setting time, DTS and pH value).

Methods

The study consist of three groups; group 1 (100% calcium hydroxide, group 2 CO₃Ap (60% DCPA: 40% vaterite, and group 3 CAS (60% DCPA: 20% vaterite: 20% SCPC. Distilled water was employed as a solution for group 1, and 0.2 mol/L Na₃PO₄ used for group 2 and group 3.

Samples were evaluated with respect to important properties for pulp capping application such as pH, setting time, mechanical strength and calcium release evaluation.

Results

The fastest setting time was in CO₃Ap cement group without SCPC, while the addition of 20% SCPC slightly increase the pH value but did not improved the cement mechanical strength, however, the mechanical strength of both CO₃Ap groups were significantly higher than calcium hydroxide. All three groups released calcium ions and had alkaline pH. Highest pH level, as well as calcium released level, was in the control group.

Conclusion

The CAS cement had good mechanical and acceptable chemical properties for pulp capping application compared to calcium hydroxide as a gold standard. However, improvements and in vivo studies are to be carried out with the further development of this material.

A systematic review on antibacterial activity of zinc against Streptococcus mutans

OBJECTIVES

The aim of this study was to systematically review the growth inhibition effectiveness of zinc against Streptococcus mutans. The main question was, "Does the zinc inhibit the growth of oral Streptococcus mutans in vitro?

METHODS

Literature search on PubMed, Medline, and science direct databases was carried out for in vitro studies published in English from 1990 to 2016, and the reported outcomes of minimum inhibitory concentration (MIC), minimum bactericidal concentrations (MBC), zone of inhibition (ZOI) and bacterial count method using colony forming unit (CFU) were used to assess the antibacterial effectiveness of zinc.

RESULTS

Seventeen studies were included in this review. Seven studies reported MIC and MBC. Four studies reported ZOI, and eight studies reported CFU. MIC values using zinc chloride and zinc oxide nanoparticles were ranged from 0.025 to 0.2 mM and 0.390 to 500 ± 306.18 µg/ml respectively. MBC values using zinc oxide nanoparticles have ranged from 3.125 to 500 µg/ml. ZOI ranged from no inhibition zone to 21 ± 1.4 mm using 23.1% zinc oxide. A considerable reduction in the bacterial count was reported after adding zinc. However, only two studies have reported no inhibitory effect of zinc.

CONCLUSION

This review indicated a significant growth inhibition effectiveness of zinc even at lower concentrations which indicate it's safely to be used in oral health products.

Cytocompatibility of a self-adhesive gutta-percha root-filling material

Context:

A novel root-filling material based on the incorporation of ultrafine alkaline bioactive glass particles (bioactive gutta-percha, [BGP]) was developed to work without sealer.

Aim:

In the present study, the objective was to verify the in vitro biological response to this material by assessing its cytocompatibility.

Materials and Methods:

Prototypes of BGP were compared to conventional gutta-percha (GP), dense polystyrene beads as a negative control and fragments of latex as a positive control. Extracts of each material were prepared according to ISO 10993-5:2009, and human osteoblast-like cells in primary culture were exposed to all extracts for 24 h. Cell viability was assayed sequentially for three different parameters: mitochondrial activity, membrane integrity, and cell density.

Statistical Analysis Used:

Nonparametric analysis (using Kruskal–Wallis test combined with post hoc Dunn's test) was performed for comparison among groups, with significance established at 5%.

Results:

BGP reduced mitochondrial activity to 62% of control, but presented no toxicity on membrane integrity and proliferation assays. BGP effect on metabolism was dose-dependent and reduced to acceptable levels with dilution.

Conclusion:

The novel GP material presented slight dose-dependent effects on cell metabolism but did not affect cell survival.

Antibacterial and bioactive coatings on titanium implant surfaces

Various surface modifications have been tried for enhancing osseointegration of the dental implants like mechanical and/or chemical treatments and deposition of calcium phosphate coatings. The objective of this research was to develop calcium-phosphate based thin coatings with antibacterial and bioactive properties for potential application in dental implants. Titanium (Ti) discs were immersed in different calcifying solutions: CaP (positive control), F-CaP, Zn-CaP, and FZn-CaP and incubated for 24 h. Negative control was uncoated Ti discs. Coated surfaces were characterized using X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy. Antibacterial properties were tested using Porphyromonas gingivalis because of its strong association with periodontal and peri-implant infections. Bacterial adhesion and colonization were studied at different timepoints. The coated surfaces had compositional characteristics similar to that of bone mineral and they inhibited the growth, colonization and adherence of P. gingivalis, resulted in reduced thickness of biofilms and bacterial inhibition in the culture medium as compared to the positive and negative controls (p < 0.05). There was no significant difference between the experimental groups (p > 0.05). It has been previously demonstrated that these coatings have excellent in vitro bioactivity (formed carbonate hydroxyapatite when immersed in a simulated body fluid). Such coatings can enhance osseointegration and prevent infection in implants, thereby improving the success rates of implants. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2218-2227, 2017.

Bioactive glasses as delivery systems for antimicrobial agents

Most biomaterial-associated infections are caused by opportunistic pathogens and bacteria that are regularly found within the microflora of the implant site. In addition, a biomaterial implant or device remains at risk of infection by hematogenous spread of bacteria disseminated from infections elsewhere in the body or from infected peri-implant tissue in revision surgery. The resulting infections are frequently accompanied by patient morbidity and discomfort and can lead to surgical replacement of the implant after lengthy, unsuccessful attempts to mitigate infections with antibiotic treatments. Therefore, extensive study is aiming to find new infection-resistant antimicrobial biomaterials and coatings for implants and devices to effectively reduce the incidence of biomaterial-associated infections. An overview of the in vitro and in vivo antimicrobial efficacies of the numerous biomaterials currently available is beyond the scope of this review. Herein, we provide a comprehensive review of bioactive glasses as biomaterial delivery systems for antimicrobial agents.

Strontium-substituted bioactive glasses in vitro osteogenic and antibacterial effects

OBJECTIVES

Bioactive glass forms a bone mineral apatite interface and can be engineered to promote optimal bone regeneration. Strontium (Sr(2+)) stimulates osteoblast and inhibits osteoclast activities in vitro, and is used clinically as a treatment for osteoporosis. Dental bone defect repair requires rapid bone formation for early osseointegration but, can be subject to infection. The aim of this study was to investigate the osteogenic and antibacterial effects of strontium-substituted bioactive glasses in vitro.

METHODS

Strontium-substituted bioactive glasses were designed and produced. Then the osteogenic potential and antibacterial effects of bioactive glass particulates were explored.

RESULTS

Alkaline phosphatase activity, cell number, Type I collagen and mineral nodule formation of MC3T3-E1 cells were significantly promoted by the 5% strontium-substituted glass (5Sr). Furthermore, after incubation with 0.001g and 0.01g glass particulates, the growth of sub-gingival bacteria, Aggregatibacter actinomycetemcomitans and Porphyromonas gingivalis was significantly inhibited; the antibacterial activity being dependent on the percentage of strontium in the glasses.

SIGNIFICANCE

These results show that strontium-substituted bioactive glasses significantly promote osteogenic responses of MC3T3-E1 osteoblast-like cells and inhibit the growth of A. actinomycetemcomitans and P. gingivalis.

Strontium- and calcium-containing, titanium-stabilised phosphate-based glasses with prolonged degradation for orthopaedic tissue engineering

Strontium- and calcium-releasing, titanium-stabilised phosphate-based glasses with a controlled degradation rate are currently under development for orthopaedic tissue engineering applications. Ca and/or Sr were incorporated at varying concentrations in quaternary phosphate-based glasses, in order to promote osteoinduction. Ti was incorporated at a fixed concentration in order to prolong degradation. Glasses of the general formula (P₂O₅)–(Na₂O)–(TiO₂)–(CaO)–(SrO) were prepared via the melt-quench technique. The materials were characterised by energy-dispersive X-ray spectroscopy, X-ray diffraction, ³¹P magic angle spinning nuclear magnetic resonance, Fourier transform infrared spectroscopy, differential thermal analysis and density determination. The dissolution rate in distilled water was determined by measuring mass loss, ion release and pH change over a two-week period. In addition, the cytocompatibility and alkaline phosphatase activity of an osteoblast-like cell line cultured on the surface of glass discs was assessed. The glasses were shown to be amorphous and contained Q¹, Q² and Q³ species. Fourier transform infrared spectroscopy revealed small changes in the glass structure as Ca was substituted with Sr and differential thermal analysis confirmed a decrease in crystallisation temperature with increasing Sr content. Degradation and ion release studies also showed that mass loss was positively correlated with Sr content. These results were attributed to the lower electronegativity of Sr in comparison to Ca favouring the formation of phosphate-based mineral phases. All compositions supported cell proliferation and survival and induced at least 2.3-fold alkaline phosphatase activity relative to the control. Glass containing 17.5 mol% Sr had 3.6-fold greater alkaline phosphatase activity than the control. The gradual release of Ca and Sr supported osteoinduction, indicating their potential suitability in orthopaedic tissue engineering applications.