A ratiometric fluorescent probe with high sensitivity and selectivity for phosgene sensing in solution and gas

A simple AIE-based indole-benzimidazole probe for the ratiometric fluorescent detection of phosgene in an almost neat aqueous solution

Phosgene is a suffocating toxic gas that seriously threatens human health and public security. With this research, we developed a simple ratiometric fluorescent probe (1) bearing indole and benzimidazole moieties as the sensing sites and employed it for the aggregation-induced emission-based (AIE-based) detection of phosgene. It was the first time that the probe could detect phosgene in an almost pure aqueous solution (fw = 99.5 %). Probe 1 had AIE-activity, and the maximum emission peak was 392 nm with increasing water fraction (0-99.5 %). When reacting with phosgene, the emission peak at 392 nm gradually decreased, while a new peak appeared at 449 nm and continued to increase with increasing water fraction (0-99.5 %). Probe 1 exhibited a rapid response toward aqueous phosgene with high selectivity and sensitivity (limit of detection being 23.8 nM). Additionally, we fabricated 1-loaded test strips for gas phosgene detection, enabling dual-channel detection under 245 nm and 365 nm hand-held UV lamps. Finally, this probe was used to monitor phosgene in bionic samples.

A Ratiometric Benzimidazole-Based Fluorescent Probe for The Recognition of Phosgene in Solution and Gaseous Phases

Considering the high toxicity and widespread application of phosgene, there is an urgent need to develop a simple and sensitive method for detecting phosgene. In this work, we designed and synthesized a novel ratiometric fluorescent probe 1 containing fluorophores of benzimidazole and benzothiazole. Probe 1 showed excellent sensitivity (< 30 s) and selectivity (LOD = 3.82 nM) for phosgene and significant ratiometric fluorescence changes. In addition, 1-loaded polystyrene membrane test strips were used to conveniently and efficiently detect phosgene gas (0.5 ppm) via the naked eye and the RGB APP of the smartphone, indicating that this probe has great potential for phosgene detection in the gaseous phase.

Ratiometric Fluorescent Probe for the Detection of Nanomolar Phosgene in Solution and Gaseous Phase: Advancing Crime Detection Applications

Phosgene, an exceptionally hazardous gas, poses a grave concern for the health and safety of the general public. The present study describes a fluorescent ratiometric probe for phosgene employing 2-(naphthalen-2-yl) benzo[d]oxazol-5-amine (NOA) with an amino group as the recognition site. NOA detects phosgene through the intramolecular charge transfer mechanism. The electron-rich amine group of NOA attacks the electrophilic carbonyl group of phosgene, resulting in a quick response within 20 s. NOA demonstrates a low detection limit of 60 nM while maintaining high selectivity and sensitivity toward phosgene. The final product was isolated and verified by nuclear magnetic resonance spectroscopy. The probe can detect phosgene not just quickly in a solution environment but also in its solid state. The probe's applications in fingerprint imaging and bioimaging are also demonstrated.

A novel turn-on fluorescent probe for detection of pH in extremely acidic environment and its application

A water-soluble turn-on fluorescent probe PNAP for pH has been designed and synthesized. PNAP was consist of pyrene as fluorophore and morpholine as receptor. Owing to the photoinduced electron transfer (PET) effect, the fluorescence of PNAP was quenched, while PNAP exhibited a remarkable "turn-on" fluorescence with the increase of acidity. Notably for its pKa of 2.15, PNAP was one of the pH fluorescent probes used in extremely acidic environments. Furthermore, PNAP also displayed good repeatability, strong anti-ion interference ability, high sensitivity and selectivity toward pH. In addition, PNAP has been successfully applied to the test strips and monitor the pH of environment water samples and realistic samples, showing its good promising prospect.

A novel benzo hemicyanine-based fluorescent probe for susceptible visualizing detection of phosgene

Leakage and misuse of phosgene, a common and highly hazardous industrial chemical, have always constituted a safety risk. Therefore, it is crucial to develop sensitive detection methods for gaseous phosgene. This work describes the design and development of a new fluorescent dye based on benzohemicyanine, as well as the synthesis of fluorescent probes for the sensitive detection of gaseous phosgene. Due to the excellent intramolecular charge transfer (ICT) effect from the strong electron-donating impact of the o-aminophenol group on benzo hemicyanine, the probe does not emit fluorescence. When the probe reacts with phosgene, the ICT effect is inhibited, and the result exhibits observable green fluorescence, thereby visualizing the response to phosgene. The probe offers exceptional sensitivity, a rapid response, and a low phosgene detection limit. In addition, we developed probe-loaded, portable test strips for the quick and sensitive detection of phosgene in the gas phase. Finally, the constructed probe-loaded test strips were utilized effectively to monitor the simulated phosgene leakage.

Fluorescent probes for the detection of chemical warfare agents

Chemical warfare agents (CWAs) are toxic chemicals that have been intentionally developed for targeted and deadly use on humans. Although intended for military targets, the use of CWAs more often than not results in mass civilian casualties. To prevent further atrocities from occurring during conflicts, a global ban was implemented through the chemical weapons convention, with the aim of eliminating the development, stockpiling, and use of CWAs. Unfortunately, because of their relatively low cost, ease of manufacture and effectiveness on mass populations, CWAs still exist in today's world. CWAs have been used in several recent terrorist-related incidents and conflicts (e.g., Syria). Therefore, they continue to remain serious threats to public health and safety and to global peace and stability. Analytical methods that can accurately detect CWAs are essential to global security measures and for forensic analysis. Small molecule fluorescent probes have emerged as attractive chemical tools for CWA detection, due to their simplicity, ease of use, excellent selectivity and high sensitivity, as well as their ability to be translated into handheld devices. This includes the ability to non-invasively image CWA distribution within living systems (in vitro and in vivo) to permit in-depth evaluation of their biological interactions and allow potential identification of therapeutic countermeasures. In this review, we provide an overview of the various reported fluorescent probes that have been designed for the detection of CWAs. The mechanism for CWA detection, change in optical output and application for each fluorescent probe are described in detail. The limitations and challenges of currently developed fluorescent probes are discussed providing insight into the future development of this research area. We hope the information provided in this review will give readers a clear understanding of how to design a fluorescent probe for the detection of a specific CWA. We anticipate that this will advance our security systems and provide new tools for environmental and toxicology monitoring.

Europium (III) complex-based fluorescent probe for instantaneous, selective, and sensitive detection of phosgene

Phosgene (carbonyl chloride, COCl₂) is a widely used colorless gas in organic synthesis. However, its high toxicity sets a severe potential damage of public safety. As the fluorescence method has the advantages of simple operation and real-time detection of phosgene, it is extremely important to develop a fluorescent phosgene probe for public health and safety. This study aimed to present a simple Eu³⁺ complex (1) with 2-hydroxyl-1H-benzimidazole moiety as a novel phosgene probe. Probe 1 exhibited characteristic emission of Eu³⁺ in CH₃CN solution, which was specifically quenched after encountering phosgene. The change in the solution color from light red to dark could be easily distinguished with the naked eye under a 365 nm ultraviolet lamp. Finally, the test paper with probe 1 was fabricated for effortless, selective, and visual detection of phosgene gas.

A Rapid, Highly Sensitive and Selective Phosgene Sensor Based on 5,6-Pinenepyridine

The toxicity of phosgene (COCl₂ ) combined with its extensive use as a reactant and building block in the chemical industry make its fast and accurate detection a prerequisite. We have developed a carboxylic derivative of 5,6-pinenepyridine which is able to act as colorimetric and fluorimetric sensor for phosgene in air and solution. For the first time, the formation of a pyrido-[2,1-a]isoindolone was used for this purpose. In solution, the sensing reaction is extremely fast (under 5 s), selective and highly sensitive, with a limit of detection (LOD) of 9.7 nM/0.8 ppb. When fixed on a solid support, the sensor is able to detect the presence of gaseous phosgene down to concentrations of 0.1 ppm, one of the lowest values reported to date.

An amino-substituted 2-(2′-hydroxyphenyl)benzimidazole for the fluorescent detection of phosgene based on an ESIPT mechanism

In this work, an ESIPT-based fluorescence probe, 5′-amino-2-(2′-hydroxyphenyl)benzimidazole (P1), was synthesized and explored for the ratiometric detection of phosgene. Compared to 2-(2′-hydroxyphenyl)benzimidazole (HBI), P1 exhibits high sensitivity (LoD = 5.3 nM) and selectivity toward phosgene with the introduction of the amine group. Furthermore, simple P1 loaded test papers are manufactured and display selective fluorescent detection of phosgene in the gas phase.

An easily prepared phosgene probe, 5′-amino-2-(2′-hydroxyphenyl)benzimidazole (P1), is designed and studied. Based on ESIPT mechanism, P1 exhibits ratiometric, sensitive and selective detection of phosgene both in solution and gas phase.