Comparative light and scanning electron microscopy in authentication of adulterated traded medicinal plants

Authentication of Single Herbal Powders Enabled by Microscopy-Guided In Situ Auto-sampling Combined with Matrix-Assisted Laser Desorption/Ionization Mass Spectrometry

In the long history of investigation of herbal products, microscopic examination has greatly contributed to the authentication of herbs in a powder form. However, it cannot provide the chemical profiles of herbal powders and thus is limited to morphological identification. In this work, we present a label-free and automatic approach for the characterization and identification of single herbal powders and their adulterants, enabled through the combination of microscopy-guided auto-sampling and matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS). To meet the demand for automatic and highly efficient in situ extraction, the glass slide was coated with gelatin to immobilize dried herbal powders that cannot stick to the glass slide like fresh and hydrated cells. The gelatin coating also facilitated the pump-out of chemical components and prevented diffusion across the interface enabled by the formation of a tight contact at the probe tip and surface. Optical microscopy was applied to acquire the microstructure and position of the herbal powders immobilized on the gelatin-coated slide. The candidate single herbal powders were picked out by a software for subsequent auto-sampling and MALDI MS identification. The combination of microstructure features and chemical profiles significantly improved the authentication capability of microscopic examination.

Pharmacognostic evaluation of Artemisia maritima L. a highly medicinal specie of genus Artemisia

The light and scanning electron microscopic observations were carried out for anatomical features of leaf, pollens and powder.Microscopic studies provide useful information for identification and authentication of adulteration in A. maritima. Nutritional analysis of A. maritima revealed that life fundamental macromolecules such as carbohydrates (49.63 %) crude proteins (13.17 %) and crude fibers (21.06 %) were present in sufficient quantity while crude fats (4.11 %) reported in low quantity. The life essential elements such as Mg (9.472 ± 0.011), Ca (4.152 ± 0.135) and Fe (4.112 ± 0.002) were found in high concentration while heavy metals reported under the safety threshold of WHO. These observations favored A. maritima an alternative of food.Appreciable quantity of phenolics (17.64 ± 0.574) and flavonoids (7.67 ± 0.069) were found while qualitatively active phytochemicals were reported.

The FTIR characterization of A. maritima crude powder revealed chromatogram in 3328.61 to 408.68 frequency range and 24 characteristic peaks on the basis of which different compounds of biological importance were classified. HPLC-UV technique quantifiedand identified six phenolic compounds morin,epigallocatechin gallate, catechin hydrate,ellagic acid, pyrogallol andrutin. Identification of compounds through GC–MS chromatogram revealed the presence of 46 compounds in methanolic fraction however 17 compounds of biological importance were selected.

In-vitro biological evaluation of A. maritima for antioxidant, antimicrobial, antidiabetic (12.61 ± 0.113 %) and cytotoxic activities (LC₅₀ = 20 μg/ml) suggested that methanolic fractions exhibited the highest activity as compared to chloroform and ethyl acetate fractions. The MIC values of 10 or 15 mg/ml were recorded for most of the fungal pathogens. Antibacterial activity revealed 3.75 mg/ml of MIC values against B. subtilis and 1.87 mg/ml against S. aureus, E. coli and P. aeruginosa. In-vivo biological evaluation revealed thatmaximum inhibition was observed for crude extract at 250 mg/kg body weight. The mechanism underlined in-vivo analgesic responses was carried out which revealed that naloxone (morphine and tramadol antagonist) showed no prominent effect while Glibenclamide pretreatment minutely modified the analgesic action. These observations clearly indicted the absence of opiod receptors and involvement of ATP sensitive potassium channels.

Morpho-palynological and anatomical studies in desert cacti (Opuntia dillenii and Opuntia monacantha) using light and scanning electron microscopy

Opuntia is the most diverse and widely distributed drought resistant promising genus of family Cactaceae. The cladodes were utilized to quantify the chemical composition of these plants helpful in lignocellulose conversion and their application towards biofuel production. The present study was aimed to evaluate and compare the taxonomic relationship based on morphology, stem anatomy and palynology of important desert cacti including Opuntia dillenii and Opuntia monacantha. This study also evaluates the potential usefulness of morphological, anatomical and pollen traits using light and scanning electron microscopy. The obtained microcharacters of stem and flowers are considered diagnostic at the generic and specific levels. Some distinguishing morphological features observed were elliptical to obovate cladodes, 1-7 spines per areole and presence of glochidia in O. dillenii. Pollen and stem anatomical characters of the studied taxa are considered highly diagnostic at the generic and species levels. The epidermis has irregular and wavy cells, with straight to sinuate wall pattern and paracytic stomata. Pollen grains appear as pantoporate and prolate spheroidal having reticulate to perforate-reticulate sculpturing while exine semi-tectate to tectate. The taxonomic features studied could be valuable to elaborate and helpful in correctly identification of Opuntia species. The methods of diverse microscopic examination also providing sufficient evidence about the taxonomy of the Opuntia species.

Pollen morphology of selected melliferous plants and its taxonomic implications using microscopy

This research aimed to explore the melliferous bee flora pollen from arid zones of District Attock, Islamabad Capital and Rawalpindi. Morpho-palynological features has provided key information for the classification and help to explain the taxonomy of several genera and species. Therefore, in this work, we examined the morphological characters of pollen potentially to be used for the species delimitation of bee flora. A total of 18 bee floral species, classified into 12 different families were collected, pressed, identified and then acetolyized to observe the grains under microscopy. Bee pollen can be described by small, medium to large sized morphotypes presenting five types of shapes, prolate spheroidal in (seven species), sub-prolate (six species), oblate spheroidal (three species), oblate and prolate (one species each) was examined. The observed polar and equatorial diameter were found maximum in Zea mays 73.5 μm and Pelargonium inquinans 66.75 μm respectively. Pollen of six different types was found namely: tricolporate, 3-zonocolporate, monoportae, tetracolporate, tetraporate and mononsulcate. Whereas highest value of colpi length was measured in Grewia tenax (24.55 μm). Exine surface nature of pollen was examined echinate psilate and scabrate. Exine thickness noted to be maximum in Verbena tenuisecta (8.40 μm) and minimum in Citrus macrocarpa (0.4 μm). Bee floral species considered difficult to identify based on other morphological traits were successfully distinguished using pollen quantitative and qualitative traits, confirming the importance of pollen morphology to diagnose characters to correctly identify honeybee flora.

Palyno-anatomical microscopic characterization of selected species of Boraginaceae and Fabaceae

Palyno-anatomical characterization of some selected species of Boraginaceae and Fabaceae using light microscopy (LM) and scanning electron microscopy (SEM) was conducted. Six species of them belongs to four genera of family Boraginaceae and other six species belongs to four genera of Fabaceae. The current study aimed to investigate palyno-anatomical features for correct identification and taxonomic significance. Pollen grains were acetolyzed and observed both qualitatively and quantitatively through light microscopy and scanning electron microscopy. Statistical data was analyzed through cluster analysis which categorized plants into clusters. Principal component analysis (PCA) was carried out to illustrate morphological variation among selected plant species. Studied plant species showed variation in shape, size, aperture type, exine ornamentation of pollen, size and shape of epidermal cells, types of stomata, guard cells, subsidiary cells and trichome types. Exine thickness was recorded maximum 2.30 ± 0.1 μm in Lablab purpureus and minimum 1.05 ± 0.2 in Gastrocotyle hispida. PCA summarized 73.78% of accumulative variance. Trichome index was observed highest 62% on the adaxial surface of Heliotropium europaeum and lowest 21% on adaxial surface of L. purpureus. These findings reinforce the importance of palyno-anatomical features in the characterization and identification of taxa. It was concluded that description of palyno-anatomical characteristics presented in this study, highly contribute to our knowledge for correct identification of plant species.

Chemometric-Guided Approaches for Profiling and Authenticating Botanical Materials

Botanical supplements with broad traditional and medicinal uses represent an area of growing importance for American health management; 25% of U.S. adults use dietary supplements daily and collectively spent over $9. 5 billion in 2019 in herbal and botanical supplements alone. To understand how natural products benefit human health and determine potential safety concerns, careful in vitro, in vivo, and clinical studies are required. However, botanicals are innately complex systems, with complicated compositions that defy many standard analytical approaches and fluctuate based upon a plethora of factors, including genetics, growth conditions, and harvesting/processing procedures. Robust studies rely upon accurate identification of the plant material, and botanicals' increasing economic and health importance demand reproducible sourcing, as well as assessment of contamination or adulteration. These quality control needs for botanical products remain a significant problem plaguing researchers in academia as well as the supplement industry, thus posing a risk to consumers and possibly rendering clinical data irreproducible and/or irrelevant. Chemometric approaches that analyze the small molecule composition of materials provide a reliable and high-throughput avenue for botanical authentication. This review emphasizes the need for consistent material and provides insight into the roles of various modern chemometric analyses in evaluating and authenticating botanicals, focusing on advanced methodologies, including targeted and untargeted metabolite analysis, as well as the role of multivariate statistical modeling and machine learning in phytochemical characterization. Furthermore, we will discuss how chemometric approaches can be integrated with orthogonal techniques to provide a more robust approach to authentication, and provide directions for future research.

Scanning electron microscopy as a tool for authentication of biodiesel synthesis from Linum usitatissimum seed oil

Utilization of renewable and alternative energy feedstocks such as nonedible seeds oil to deal with the increasing energy crises and related ecological concerns have gained the attention of researchers. Biodiesel is an efficient and renewable substitute for diesel engine. This work investigates the potential of inexpensive nonedible seed oil of Linum usitatissimum to synthesize biodiesel using iron sulfate green nanocatalyst through the process of transesterification. Flax seed contains about 37.5% oil content estimated through Soxhlet apparatus. Light microscopy revealed that seed size varies from 3.0 to 6.0 cm in length, 2.0 to 3.3 cm in width, and 0.7 to 1.0 mm in diameter. Color of seed varied from yellow to brown. Characterization of biodiesel is performed through GC-MS and FTIR. Scanning electron microscopy was carried out to study the morphological features of seed coat. Catalyst was characterized by scanning electron microscopy, energy diffraction X-ray, and X-ray diffraction. The diffraction peaks of Fe₃ O₄ green nanoparticles were found to be in 2θ values, 30.24°, 35.62°, 38.26°, 49.56°, 57.12°, and 62.78°. Fuel properties of biodiesel are also determined and compared with ASTM standards. Linum usitatissimum biodiesel has density 0.8722 (15°C kg/L), kinetic viscosity 5.45 (40°C cSt), flash point (90°C), pour point (-13°C), cloud point (-9°C), sulfur (0.0432% wt), and total acid number (0.245 mg KOH/g). It is concluded that L. usitatissimum seed oil is a highly potential source for biodiesel production to cope with the challenge of present energy demand.

Scanning electron microscopic screening; Can it be a taxonomic tool for identification of traditional therapeutic plants

The limiting factor in the utilization of herbal medicine is the risk of replacement or substitution of their plant resources. Therefore, the authentication of medicinal plants before its use in herbal medicines is essentially required. Hence, the prime objective of this study was to provide some reliable morpho-anatomical and morpho-palynological tools for the identification of nine traditional therapeutic plants of district Lahore. For this study, scanning electron microscopic and light microscopic approaches has been employed. Results reported great variations in qualitative and quantitative morpho-anatomical features of the epidermal cell, stomatal complexes, trichomes, silica bodies and oil droplets. For example, Aegle marmelos L. can be distinguished from Cestrum diurnum L. based on epidermal cell shapes, as irregular cells in former and lobed cells shape in later one. Similarly unicellular, bicellular, and multicellular trichomes could be an identification basis for Cynodon dactylon L., Lantana camara L., and Pongamia pinnata L., respectively. In combination with these morpho-anatomical characters, SEM-based morpho-palynological characterization also reported diagnostic value. Both the Aegle marmelos and Lantana camara possessed similar cell shape (irregular) but can be delimited based on their pollen morphology as spheroidal pollen was reported in Aegle marmelos whereas prolate in Lantana camara. Moreover, quantitative characters also aid well for species delimitation, such as prolate pollen found in both Cestrum diurnum and Terminalia chebula Retz. but both of these varied in their P/E ratio, that is, 0.97 and 0.88, respectively. The leaf epidermal characters in correlation with morph-palynological traits showed potential for taxonomic resolution at the species level. RESEARCH HIGHLIGHTS: This study provides valuable morpho-anatomical and morpho-palynological tools for the nine traditional therapeutic plants of the district, Lahore, Pakistan. Light and scanning electron microscopic studies provided useful systematic data for the identification of studied plants. This systematic data include moprho-anatomical and morpho-palynological keys for the studied plants. This data can be used for future identification purposes.