Evaluation of curved root canals filled with a new bioceramic sealer: A microcomputed tomographic study using images with different voxel sizes and segmentation methods

The Effect of Micro-Computed Tomography Thresholding Methods on Bone Micromorphometric Analysis

Bone micromorphometric parameters are generally analyzed with micro CT to reveal two- and three-dimensional structures. These parameters are generally used for new bone formation studies such as tissue engineering and biomaterials studies. Different threshold methods are used for the image segmentation of bone micromorphometric parameters. However, these different threshold methods provide different results for the bones analyzed. This study aimed to compare thresholding methods to evaluate bone micromorphometric parameters in the mouse bone. A dataset containing 15 mouse tibia was used to analyze the different thresholding methods for bone micromorphometric parameter analysis. These threshold methods were used to analyze the mouse tibia (n = 15) with thresholded bones. The threshold methods and the analysis were used directly from CTAn (Bruker Micro-CT). The results were compared between the threshold methods, which included bone volume, trabecular number, connectivity, trabecular separation, and other parameters. There was agreement to some extent for all bone micromorphometric analyses using the different thresholding methods. The results showed that the thresholding method showed good agreement for connectivity and trabecular thickness, but the other parameters showed limited agreement. The evaluation of threshold methods allows for the comparison of image segmentation and the quantification of mouse tibia micromorphometric parameters. This study may enable the analysis of bone micromorphometric parameters using the relatively close threshold method in image segmentation across different research groups.

The impact of the filling technique with two sealers in bulk or associated with gutta-percha on the fatigue behavior and failure patterns of endodontically treated teeth

Background

The present in vitro study aimed to evaluate the fatigue behavior of teeth filled with a calcium silicate-based sealer (Bio-C Sealer, BC) or an epoxy resin-based sealer (AH Plus, AH), in bulk or associated with gutta-percha as main core material.

Methods

Seventy-two sound human maxillary anterior teeth were initially selected. Sixty of them, were randomly chosen, and had their root canals prepared using nickel-titanium reciprocating instruments, being again randomly assigned to five experimental groups (n = 12): C+ (control + prepared but not filled); BC-B (BC in bulk); BC-GP (BC+ gutta-percha); AP-B (AH in bulk); AP-GP (AH+ gutta-percha). An additional negative control group (C-) was considered (n = 12), consisting only on sound teeth, without preparation and filling. The specimens were submitted to a survival analysis after the cyclic fatigue test.

Results

Sound teeth (C-) presented the best fatigue performance (P < 0.05), being similar only to the AP-GP group (P > 0.05). Despite that, all experimental groups showed similar fatigue behavior (P > 0.05) to C+ (BC-B = BC-GP = AP-B = AP-GP = C+). Based on that, it can be seen that the use of gutta-percha, as a main core material, associated with the AH Plus sealer, reestablished the mechanical fatigue performance of endodontically treated teeth comparable to sound teeth, still consisting on the most promising approach to rehabilitate such scenario. Teeth filled in bulk, had discreetly higher risk of premature failures and inferior fatigue performance.

Filling ability of ready-to-use or powder-liquid calcium silicate-based sealers after ultrasonic agitation

This study evaluated the effect of ultrasonic agitation on the filling capacity of ready-to-use calcium silicate-based sealer Bio-C Sealer (BCS, Angelus, Paraná, Brazil) or powder-liquid BioRoot RCS (BR, Septodont, Saint-Maur-des-Fossés, France) using curved artificial canals by micro-computed tomography (micro-CT). Additionally, flow (mm) and flow area (mm2) were evaluated for both materials. Acrylic resin main canal (60° curvature and 5 mm radius, with 3 lateral canals in the cervical, middle, and apical thirds) were prepared up to size 40/.05 (Prodesign Logic, Brazil). The agitation method was used with ultrasonic tip (US, Irrisonic, Helse, Brazil): BCS, BCS/US, BR, and BR/US. All specimens were filled using the single-cone technique. The samples were scanned by micro-CT (8,74 µm) after obturation. The percentage of filling material and voids were calculated. Flow was evaluated based on ISO 6876/2012 standards (mm) and area (mm2). The data were statistically analyzed using ANOVA and Tukey tests (α = 0.05). BR/US showed lower percentage of filling material in the lateral canals than and, BCS/US (p<0.05). BR/US resulted in a higher percentage of voids than BR in the lateral apical third (p<0.05). BCS showed higher flow than BR (p<0.05). BCS and BR presented proper filling capacity in the simulated curved canals regardless of the use of ultrasonic agitation. However, BR/US showed more voids in the apical third. BCS demonstrates higher filling ability.

Assessment of isthmus filling using two obturation techniques performed by students with different levels of clinical experience

Background/purpose

Root canal filling is a necessary skill for dental students and an important aspect of endodontic education. This study aimed to evaluate the effect of students' clinical experiences on isthmus filling using different techniques and sealers.

Materials and methods

One hundred eight three-dimensional-printed resin replicas of isthmus were divided into six groups and either continuous wave of condensation (CWC) or single-cone obturation (SC) was performed. One of three sealers (AH Plus Jet®, GuttaFlow2, iRoot SP) was used together with a size-fitted gutta-percha master cone. All the obturations were completed by students with three different levels of clinical experience including senior postgraduate students (SPS), junior postgraduate students (JPS), and undergraduate students (US). The percentages of filled areas (PFA) at 2, 4, 6, and 8 mm from the apex were analyzed using a light microscope. Data were analyzed using the Mann-Whitney U test or Kruskal-Wallis 1-way ANOVA with Dunn's tests (α = 0.05).

Results

The CWC group exhibited a higher PFA than the SC group (P < 0.05). The PFA was higher in the SPS group than in the JPS group or the US group with CWC (P < 0.05). The three clinical experience groups showed similar PFAs with SC (P > 0.05); however, when using SC with iRoot SP, the PFA was higher than with either of the other two sealers (P < 0.05).

Conclusion

CWC was found to be technique-sensitive and required clinical training. With SC, clinical experience did not improve the quality of isthmus filling without additional training. CWC was superior to SC for type IV isthmuses. When using SC, better filling quality was obtained with a bioceramic sealer.

Effect of Enhanced Recovery after Surgery (ERAS) Concept and Cluster Nursing on Psychological State and Pain of Oral Outpatients Undergoing Root Canal Therapy

Objective

The effect of the concept of enhanced recovery after surgery (ERAS) and pain of patients undergoing root canal therapy in oral clinic.

Methods

200 participants in an oral clinic from March 2020 to March 2022 were enrolled in our study. The control group (n = 100) accepted ERAS-based care and the research group (n = 100) accepted ERAS concept and cluster nursing. Nursing satisfaction, comfort, self-efficacy, subjective well-being, self-rating anxiety scale (SAS), and self-rating depression scale (SDS) scores were compared.

Results

The research group had 100% satisfaction rate; the control group had 87% satisfaction rate. After nursing, the scores of comforts and self-efficacy of the two groups increased and the scores of comforts and self-efficacy of the research group were higher than those of the control group. After nursing, the scores of subjective well-being of the two groups increased. Furthermore, the higher scores of life satisfaction, interpersonal harmony, and self-efficacy in the research group were found. There was no significant difference in the scores of SAS and SDS between the two groups before nursing (P > 0.05), but after nursing, the scores of SAS and SDS in the two groups decreased, and the scores of SAS and SDS in the research group were lower than those in the control group, and there are statistically significant differences between the groups (P < 0.05). The scores of visual analogue score (VAS) and numerical rating scale (NRS) following intervention decreased, and there are statistically significant differences between the groups (P < 0.05). The less physiological, psychological, social functions, and health self-cognition in the research group were displayed, and there are statistically significant differences between groups (P < 0.05).

Conclusion

The adoption of the concept of ERAS and cluster nursing can effectively improve the psychological state and pain score of oral outpatients undergoing root canal therapy, improve comfort and self-efficacy, and enhance subjective well-being and quality of life. ERAS and cluster nursing is of great significance in relieving pain after root canal therapy in the outpatient department, reducing patients' pain and improving patients' quality of life.

Micro-CT assessment of gap-containing areas along the gutta-percha-sealer interface in oval-shaped canals

AIM

To assess the interfacial adaptation (gap-containing areas) of two root canal sealers (EndoSequence BC Sealer and AH Plus) to a conventional gutta-percha (GP) cone (GP-sealer interface) in oval-shaped canals filled using the single cone technique.

METHODOLOGY

Sixteen teeth with oval-shaped canals were selected, scanned in a micro-computed tomographic device, and pair-matched according to the volume, aspect ratio and configuration of root canals. Root canals were then sequentially prepared with WaveOne Gold Primary and Large instruments, followed by filling with WaveOne Large GP points associated with either the premixed calcium-silicate EndoSequence BC Sealer or the epoxy resin-based AH Plus sealer (n = 8 per group) using the single cone technique. After 7 days stored in phosphate-buffered saline solution at 37°C, the specimens were rescanned and the reconstructed images segmented in order to differentiate the filling materials (sealer and GP cone) to the dentine. A total of 453 cross-sectional slices were assessed and categorized according to the presence or absence of gaps at the GP-sealer interface. Mann-Whitney U-test verified the differences between groups and were considered significant at alpha = 5%.

RESULTS

Gaps were non-homogenously distributed in two-dimensional axial cross-section images and none of the specimens showed completely gap-free areas along the entire GP-sealer interface. Root canals filled with EndoSequence BC Sealer and AH Plus displayed 171 (37.75%) and 136 (30.02%) slices with gaps in the GP-sealer interface and these frequencies were statistically significant (p = .000).

CONCLUSIONS

Although none of the specimens had a gap-free area along the entire GP-sealer interface, oval canals filled with AH Plus showed less gaps than the ones filled with EndoSequence BC Sealer.