Anteroposterior Translational Malalignment of Ankle Arthrodesis Alters Foot Biomechanics in Cadaveric Gait Simulation

Comparison of different internal fixation models in ankle arthrodesis using 3D finite-element analysis

BACKGROUND

The purpose of this study is to use three-dimensional finite-element analysis to better understand the biomechanical features of various internal fixators for ankle arthrodesis.

METHODS

We used finite-element analysis to compare four different types of internal fixations in ankle arthrodesis: Group A had three crossed screws (Ø6.5 mm); Group B had two crossed screws (Ø6.5 mm) and an anterior plate (Ø2.7 mm); Group C only had an anterior anatomical plate (Ø3.5 mm); Group D had one anterior anatomical plate (Ø3.5 mm) and one posterior-lateral screw (Ø6.5 mm). We adopted Ansys 21.0 software to analyze and compare the four types in terms of the displacement of the arthrodesis surface and the stress peak and stress distribution of these models under intorsion, extorsion, dorsiflexion torque, and neutral vertical load.

RESULTS

① Displacement of the arthrodesis surface: In Group A, the maximum displacement was larger than Group D under neutral vertical load and dorsiflexion torque but less than it under intorsion and extorsion torque. In Group B, the maximum displacement against dorsiflexion, neutral vertical load, intorsion, and extorsion was less than that in the other three fixation models. In Group C, the maximum displacement against the above four loading patterns were significantly higher than that in another three fixation models. ② Stress peak and stress distribution: based on the stress distribution of the four models, the peak von Mises stress was concentrated in the central sections of the compression screws, plate joints, and bending parts of the plates.

CONCLUSIONS

The fixation model consisting of two crossed screws and an anterior outperformed the other three fixation models in terms of biomedical advantages; thus, this model can be deemed a safe and reliable internal fixation approach for ankle arthrodesis.

Robotic-assisted foot and ankle surgery: a review of the present status and the future

The surgical application of robotics has increased significantly since its first application in 1985 for a brain biopsy acquisition. Robotic-assisted surgery has been one of the viable options in various surgical areas, and also in orthopaedic surgery. Robotic-assisted orthopaedic surgery has gained popularity as a mean of improving accuracy, reducing complications and achieving better patient satisfaction. Numerous clinical research studies have demonstrated advantages of robotic-assisted orthopaedic surgery, however, most of that researches were about the total knee arthroplasty, total hip arthroplasty and spine surgery. The application of robotic technology in foot and ankle surgery is in a very nascent stage. Furthermore, there has been little research on intraoperative use of robotics in foot and ankle surgery in literature. A review of previous preclinical studies in foot and ankle robotics and clinical research studies in various fields of robot-assisted orthopaedic surgery shows that its potential application and benefits over conventional techniques, such as total ankle arthroplasty, minimally invasive surgery for foot and ankle trauma or other corrective procedure, and intraoperative biomechanical testing. More studies on practical application of robotic technology to surgical procedure in the field of foot and ankle surgery are needed to confirm its clinical usefulness and cost effectiveness.

Role of Robotic Gait Simulators in Elucidating Foot and Ankle Pathomechanics

Testing with cadaveric foot and ankle specimens began as mechanical techniques to study foot function and then evolved into static simulations of specific instances of gait, before technologies were eventually developed to fully replicate the gait cycle. This article summarizes the clinical applications of dynamic cadaveric gait simulation, including foot bone kinematics and joint function, muscle function, ligament function, orthopaedic foot and ankle pathologies, and total ankle replacements. The literature was reviewed and an in-depth summary was written in each section to highlight one of the more sophisticated simulators. The limitations of dynamic cadaveric simulation were also reviewed.

A Novel and Inexpensive Technique for High-tension Tendon Clamping with Expandable Mesh Sleeving for in Vitro Foot Biomechanics Testing

In vitro biomechanical testing is common in the field of orthopedics when novel devices are investigated prior to human trials. It is typically necessary to apply loads through tendons to simulate normal activities, such as walking during a foot and ankle study. However, attachment of tendons to linear actuators has proven challenging because of the tendency of clamps to either slip off or rupture the tendon. Freeze clamping is generally accepted as the gold standard for very high load testing in excess of 3000 N, but is expensive, time-consuming, and requires significant ancillary equipment. Purely mechanical solutions such as metal jaw clamps, wire meshes, and others have been explored, but these techniques are either costly, have low load capacities, or have not proven to be reproducible. We have developed a novel tendon clamping technique that utilizes a slip-resistant polyester mesh sleeving that encases the tendon and is fixated at the bottom of the tendon/sleeve interaction with a giftbox suture. The loose end of the sleeving can then be tied in to the linear actuator or load cell apparatus using a timber hitch knot. The sleeving technique allows for loads of 2000-2500 N on the Achilles tendon, and is inexpensive, reproducible, and can be modified to apply loads to smaller tendons as well, though a length of tendon/sleeve overlap of at least 16 cm is required to reach maximum loads. This technique should assist researchers in integrating muscle forces into future biomechanical study designs.

[Arthrodesis of the Upper Ankle and Subtalar Joint - Indication and Technique]

Arthrodesis of the upper ankle and subtalar joint are still frequently used and at the moment the gold standard in the therapy of severe arthritis and deformity of the ankle joint and hindfoot. The spectrum of indications is wide, beginning from posttraumatic or degenerative changes to postinfectious, rheumatoid and diabetic causes of arthritis and as a salvage procedure after failed ankle arthroplasty. The types of arthrodesis have to be differentiated from each other: tibiotalar, subtalar and tibiotalcalcaneal fusion. Soft tissue conditions have to be taken into account; these and individual factors like comorbidities and osseous conditions require an individual planning of the approaches and types of fixation.

Radiographic Sagittal Tibio-Talar Offset in Ankle Arthrodesis-Accuracy and Reliability of Measurements

Radiographic outcome assessment of ankle arthrodesis (AA) requires accurate measurement techniques. This study aimed to identify the most reliable methods for sagittal tibio-talar alignment measurements with regard to the tibio-talar offset after AA. Lateral weight-bearing radiographs of 38 fused ankles were selected for retrospective review. The sagittal tibio-talar angle (STTA), the modified tibio-talar ratio (mT-T ratio) and the sagittal tibio-talar offset (tibCOR, procLAT) were measured by three independent observers. Intra- and interobserver correlation coefficients (ICC) and mean measurement differences were calculated to assess measurement reliability and accuracy. By defining the talar longitudinal axis as a line from the inferior aspect of the posterior tubercle of the talus to the most inferior aspect of the talar neck, STTA showed excellent (ICC 0.924; CI 95% 0.862–0.959) and mTT-ratio provided high (ICC 0.836; CI 95% 0.721–0.909) interobserver reliability, respectively. For tibio-talar offset measurement the tibCOR method showed superior reliability and better interobserver agreement compared to the procLAT technique. The STTA and a modified T-T ratio are recommended for future scientific radiographic measurements in AA.