Dispersive liquid-phase microextraction in combination with HPLC for the enrichment and rapid determination of benzoylurea pesticides in environmental water samples

Co-precipitation based on layered double hydroxides and anionic surfactants for preconcentration of six benzoylurea insecticides in soft drinks before simultaneous analysis by high-performance liquid chromatography

Layered-double hydroxides (LDHs) modified with anionic surfactants via a co-precipitation method were developed for preconcentrating and simultaneous analysis of six benzoylurea insecticides (BUs) by high-performance liquid chromatography (HPLC). The anionic surfactants with different chain lengths, including sodium dodecylbenzene sulfonate (SDBS), sodium dodecyl sulfate (SDS), sodium 1-nonane sulfonate (SNS), and sodium 1-hexane sulfonate monohydrate (SHS) were investigated to improve the extraction efficiency of LDHs. The SDBS-LDHs provided the highest efficiency for the enrichment of the BUs studied. Under the chosen conditions, enrichment factors in the range of 38-69 and detection limits in the range of 0.1-0.3 μg L^-1 were achieved. Good reproducibilities (RSD < 13.8%) and recoveries (71.4-118.7%) were also obtained. The proposed preconcentration method, used as an in situ procedure offers rapid and simple simultaneous preparation of LDHs and extraction of BUs. The method was successfully applied for residue analysis of BUs in fruit- and flower-derived soft drink samples.

Fabrication of a Magnetic Fluorinated Covalent Organic Framework for the Selective Capture of Benzoylurea Insecticide Residue in Beverages

Efficient capture of benzoylurea insecticide (BU) residue in food is a vital procedure for food safe monitoring. Herein, a core-shell structured magnetic fluorinated covalent organic framework with good magnetic responsiveness and abundant fluorine affinity sites was successfully synthesized, suitable for magnetic solid-phase extraction (MSPE) of BUs. Using a room-temperature synthesis strategy, the magnetic fluorinated covalent organic framework was fabricated by in situ polymerization of 1,3,5-tris(4-aminophenyl) triazine (TAPT) and 2,3,5,6-tetrafluoroterephthaldehyde (TFTA) on the surface of carboxylated Fe₃O₄ nanoparticles. The competitive adsorption experiment and molecular simulation verified that this magnetic fluorinated covalent organic framework possesses favorable adsorption affinity for BUs. This magnetic fluorinated covalent organic framework could be easily regenerated and reused at least eight times with no reduction of enrichment performance. Combining this magnetic fluorinated covalent organic framework-based MSPE with high-performance liquid chromatography-tandem mass spectrometry, a novel sensitive method for the analysis of BUs was developed. In yellow wine and fruit juice samples, good linear correlations were obtained for BUs in the range of 10-2000 and 20-4000 ng·L^-1, respectively. The limit of quantitation of the BUs ranged from 1.4 to 13.3 ng·L^-1 in the two beverage matrices. Desirable precision was achieved, with intraday and interday relative standard deviations lower than 11%.

Dissolvable Mg/Al layered double hydroxides and surfactant as an extractant for trace analysis of benzoylurea insecticides by high performance liquid chromatography

A rapid and simple preconcentration method using dissolvable Mg/Al layered-double hydroxides (LDHs) and high performance liquid chromatography-photodiode array detection (HPLC-PDA) was developed for the analysis of benzoylurea insecticides (BUs) in water and honey samples. The proposed dissolvable LDHs for the extraction can be prepared in one step by the sequential addition of sodium hydroxide, magnesium chloride, aluminium chloride, and sodium dodecyl sulfate into the sample solution containing the target BUs. The co-precipitate phase was simply obtained after centrifugation, and the phase was then dissolved with formic acid before analysis by HPLC. The developed method provided an enrichment factor of 12.5-23.7. LODs were obtained in the range of 0.1-0.3 μg L^-1 for deionized water, 0.2-2.0 μg L^-1 for environmental waters, and 0.5-2.0 μg L^-1 for the analyzed honey samples. Good recoveries ranging from 78.4 to 117.8% and 72.7 to 117.9% for water and honey samples, respectively, were obtained.

Toxic effects of flufenoxuron on development and vascular formation during zebrafish embryogenesis

Flufenoxuron, a chitin synthesis inhibitor that is widely used in developed countries as an insecticide, is rarely degraded in the environment. In addition to that in insects, flufenoxuron-mediated non-targeted death in organisms such as lizards and bees has been reported. However, the toxic effects of this compound on vascular development during embryogenesis, as well as the underlying mechanism, have not yet been elucidated. In the present study, we assessed abnormal development and cardiovascular damage induced by flufenoxuron in zebrafish embryos. Exposed zebrafish had malformed eyes and pathological characteristics such as heart and yolk sac edema. In accordance with developmental inhibition, cell cycle regulatory genes were dysregulated in zebrafish embryos upon exposure to flufenoxuron. We also discovered that this agent can disrupt vascular formation by interfering with angiogenesis-associated genes including the genes encoding vascular endothelial growth factor Aa (vegfaa), vegfc, fms-related tyrosine kinase 1 (flt1), and flt4 in zebrafish embryos. These anti-angiogenic effects of flufenoxuron were further verified using a well-known angiogenesis model, namely human umbilical vein endothelial cells. In conclusion, our results suggest that flufenoxuron inhibits overall development and angiogenesis during embryogenesis.

Dispersive micro-solid-phase extraction of benzoylurea insecticides in water samples with hyperbranched polyester composite as sorbent

Hyperbranched polyester was used as efficient and accessible sorbent in the dispersive micro-solid-phase extraction method.

Freezing temperature controlled deep eutectic solvent dispersive liquid–liquid microextraction based on solidification of floating organic droplets for rapid determination of benzoylureas residual in water samples with assistance of metallic salt

A hydrophobic deep eutectic solvent worked as an extractant to extract benzoylureas with assistance of FeCl₃ contained dispersive-demulsified solvent.

Effervescence-assisted dispersive liquid–liquid microextraction based on the solidification of a floating ionic liquid with a special collection method for the rapid determination of benzoylurea insecticides in water samples

Dispersion liquid–liquid microextraction based on the solidification of a floating ionic liquid.

Rapid determination of parabens in seafood sauces by high-performance liquid chromatography: A practical comparison of core-shell particles and sub-2 μm fully porous particles

In this work, the chromatographic performance of superficially porous particles (Halo core-shell C18 column, 50 mm × 2.1 mm, 2.7 μm) was compared with that of sub-2 μm fully porous particles (Acquity BEH C18 , 50 mm × 2.1 mm, 1.7 μm). Four parabens, methylparaben, ethylparaben, propylparaben, and butylparaben, were used as representative compounds for calculating the plate heights in a wide flow rate range and analyzed on the basis of the Van Deemter and Knox equations. Theoretical Poppe plots were constructed for each column to compare their kinetic performance. Both phases gave similar minimum plate heights when using nonreduced coordinates. Meanwhile, the flat C-term of the core-shell column provided the possibilities for applying high flow rates without significant loss in efficiency. The low backpressure of core-shell particles allowed this kind of column, especially compatible with conventional high-performance liquid chromatography systems. Based on these factors, a simple high-performance liquid chromatography method was established and validated for the determination of parabens in various seafood sauces using the Halo core-shell C18 column for separation.

Determination of benzoylurea insecticides in environmental water and honey samples using ionic-liquid-mingled air-assisted liquid–liquid microextraction based on solidification of floating organic droplets

This method combined the advantages of air-assisted liquid–liquid microextraction and solidified floating organic droplet microextraction with a mixture extractant.