Mass Spectrometry Approaches for Detection and Determination of Prostaglandins from Biological Samples

Accurate determination of prostaglandins (PGs) from biological samples is critical for understanding their biological functions and interactions during physiological and pathological processes. Liquid chromatography-tandem mass spectrometry (LC-MS/MS) is a highly sensitive, accurate, and high-throughput approach for simultaneous detection of ultra-trace PGs from a single biological sample. Here we describe LC-MS/MS techniques and related sample pretreatment methods including both off-line and on-line SPE for the determination of PGs in biological samples.

Preparation and performance analysis of monodisperse glycidyl methacrylate modified restricted access media-imprinted materials

Using monodisperse poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) as the matrix, and pefloxacin template molecules, a novel restricted-access medium molecularly imprinted polymers with Bovine serum albumin crosslinked on its surface was prepared through reversible addition fragmentation chain-transfer polymerization. Then, the obtained material was employed in dispersive solid-phase extraction to analyze the fluoroquinolones in untreated egg samples by HPLC-UV detection. Adsorption performance revealed a good binding amount (40.72 mg/g), fast binding kinetics (25 min), satisfactory selectivity and good ability to eliminate matrix interference. The Reusability experiments indicated the materials has good reusable performance after repeated. Under the optimised conditions, restricted access media-molecularly imprinted polymers-dispersive solid phase extraction was combined with HPLC-UV to enrich fluoroquinolones in untreated eggs, good limit of detection (1.31-3.15 μg/L) and high recovery (89.5%-96.8%) were obtained. The results showed that the prepared restricted-access material is promising for direct detection of antibiotics in complex samples. This article is protected by copyright. All rights reserved.

Polycaprolactone Composite Micro/Nanofibrous Material as an Alternative to Restricted Access Media for Direct Extraction and Separation of Non-Steroidal Anti-Inflammatory Drugs from Human Serum Using Column-Switching Chromatography

Application of the poly-ɛ-caprolactone composite sorbent consisting of the micro- and nanometer fibers for the on-line extraction of non-steroidal anti-inflammatory drugs from a biological matrix has been introduced. A 100 μL human serum sample spiked with ketoprofen, naproxen, sodium diclofenac, and indomethacin was directly injected in the extraction cartridge filled with the poly-ɛ-caprolactone composite sorbent. This cartridge was coupled with a chromatographic instrument via a six-port switching valve allowing the analyte extraction and separation within a single analytical run. The 1.5 min long extraction step isolated the analytes from the proteinaceous matrix was followed by their 13 min HPLC separation using Ascentis Express RP-Amide (100 × 4.6 mm, 5 µm) column. The recovery of all analytes from human serum tested at three concentration levels ranged from 70.1% to 118.7%. The matrix calibrations were carried out in the range 50 to 20,000 ng mL⁻¹ with correlation coefficients exceeding 0.996. The detection limit was 15 ng mL⁻¹, and the limit of quantification corresponded to 50 ng mL⁻¹. The developed method was validated and successfully applied for the sodium diclofenac determination in real patient serum. Our study confirmed the ability of the poly-ɛ-caprolactone composite sorbent to remove the proteins from the biological matrix, thus serving as an alternative to the application of restricted-access media.

Removal of adsorption sites on the external surface of mesoporous adsorbent for eliminating the interference of proteins in enrichment of phosphopeptides/nucleotides

Various mesoporous adsorbents are of great promise for enriching small molecules from biological samples based on the size-exclusion effect. At present, the mesoporous adsorbents have adsorption sites distributed uniformly on the internal and external surfaces of mesopores. However, the adsorption sites on the external surface can adsorb proteins, interfering with the enrichment of small molecules. Herein, a novel immobilized-Ti⁴⁺ magnetic mesoporous adsorbent removing the adsorption sites on the external surface was facile prepared via the coupling chemistry of isocyanate with amine and consequent hydrolysis of urea linkage by urease. The adsorbent enables fast and selective enrichment of phosphopeptides and nucleotides from biological samples. In addition, sensitive detection methods for phosphopeptides and nucleotides in human serum are developed by coupling the magnetic solid-phase extraction with matrix-assisted laser desorption/ionization time of flight mass spectrometry and liquid chromatography-mass spectrometer, respectively. Under optimal conditions, response is linear (R² ≥ 0.9923), limits of detection are low (0.41-9.48 ng mL^-1), and reproducibility is acceptable (inter- and intra-day assay RSDs of≤15.0%) for six nucleotides. The developed strategy offers an effective method to eliminate the interference of proteins in the enrichment of small molecules from real biological samples.

Highly selective enrichment and direct determination of imazethapyr residues from milk using magnetic solid-phase extraction based on restricted-access molecularly imprinted polymers

Restricted access media magnetic molecularly imprinted polymers (RAM-MMIPs) were prepared as magnetic solid phase extraction (M-SPE) material by reversible addition fragmentation chain transfer (RAFT) technique. The resulting RAM-MMIPs had a uniform, imprinted, hydrophilic layer (63 nm), good binding capacity (34.85 mg g-1) and satisfactory selectivity. In addition, these RAM-MMIPs had a robust ability to eliminate the interference of protein macromolecules. These RAM-MMIPs were then coupled with HPLC/UV to identify imazethapyr (IM) residues in untreated milk samples. Several major factors would affect M-SPE extraction efficiency, such as the amount of RAM-MMIPs, pH, extraction time of the sample solution, and the volume ratio of the elution solvent. Under the optimal conditions, the developed method had good linearity (R2 > 0.9993), low detection limit (2.13 μg L-1), and low quantitative limit (7.15 μg L-1). These results indicated this proposed approach is an efficient method for direct enrichment and detection of IM herbicides in milk and other biological samples.

Development of an analytical method to quantify pharmaceuticals in fish tissues by liquid chromatography-tandem mass spectrometry detection and application to environmental samples

A sensitive multiresidue method was developed to quantify 35 pharmaceuticals and 28 metabolites/transformation products (TPs) in fish liver, fish fillet and fish plasma via LC-MS/MS. The method was designed to cover a broad range of substance polarities. This objective was realized by using non-discriminating sample clean-ups including separation technique based on size exclusion, namely restricted access media (RAM) chromatography. This universal clean-up allows for an easy integration of further organic micropollutants into the analytical method. Limits of quantification (LOQ) ranged from 0.05 to 5.5 ng/mL in fish plasma, from 0.1 to 19 ng/g d.w. (dry weight) in fish fillet and from 0.46 to 48 ng/g d.w. in fish liver. The method was applied for the analysis of fillets and livers of breams from the rivers Rhine and Saar, the Teltow Canal as well as carps kept in fish monitoring ponds fed by effluent from municipal wastewater treatment plants. This allowed for the first detection of 17 analytes including 10 metabolites/TPs such as gabapentin lactam and norlidocaine in fish tissues. These results highlight the importance of including metabolites and transformation products of pharmaceuticals in fish monitoring campaigns and further investigating their potential effects.

Poly-ε-caprolactone Nanofibrous Polymers: A Simple Alternative to Restricted Access Media for Extraction of Small Molecules from Biological Matrixes

Poly-ε-caprolactone nanofibrous polymer has been used as an alternative to restricted access media for extraction of protein-containing biological samples and direct transfer in the chromatographic system. Three commercial cartridges differing in length and internal diameter have been manually packed with the composite material prepared from poly-ε-caprolactone nanofibers coated on poly-ε-caprolactone microfibrous scaffold and connected to the column-switching chromatographic system. Bovine milk and human serum (25 μL) spiked with a mixture of methyl-, ethyl-, propyl-, and butylparaben in a concentration range of 1-100 μg mL^-1 were online extracted using the cartridge-containing fibers. Then, 5 and 20% (v/v) aqueous methanol was applied as the washing mobile phase. While the ballast protein macromolecules were quantitatively eluted from the nano/microfibrous composite sorbent, the parabens were retained. After the mobile phase was switched to a stronger one, these compounds were then eluted from the extraction sorbent, directed in the analytical column, and finally separated. An extraction efficiency of 86-101% for all parabens achieved using the optimum-sized cartridge and a repeatability of the extraction procedure of 0.06-1.95% RSD were obtained.

Challenges and Advances in the Fabrication of Monolithic Bioseparation Materials and their Applications in Proteomics Research

High-performance liquid chromatography integrated with tandem mass spectrometry (HPLC-MS/MS) has become a powerful technique for proteomics research. Its performance heavily depends on the separation efficiency of HPLC, which in turn depends on the chromatographic material. As the "heart" of the HPLC system, the chromatographic material is required to achieve excellent column efficiency and fast analysis. Monolithic materials, fabricated as continuous supports with interconnected skeletal structure and flow-through pores, are regarded as an alternative to particle-packed columns. Such materials are featured with easy preparation, fast mass transfer, high porosity, low back pressure, and miniaturization, and are next-generation separation materials for high-throughput proteins and peptides analysis. Herein, the recent progress regarding the fabrication of various monolithic materials is reviewed. Special emphasis is placed on studies of the fabrication of monolithic capillary columns and their applications in separation of biomolecules by capillary liquid chromatography (cLC). The applications of monolithic materials in the digestion, enrichment, and separation of phosphopeptides and glycopeptides from biological samples are also considered. Finally, advances in comprehensive 2D HPLC separations using monolithic columns are also shown.

An integrated multipath liquid chromatography-mass spectrometry system for the simultaneous preparation, separation, and detection of proteins and small molecules

A multipath liquid chromatography with mass spectrometry instrument was constructed with the help of restricted access media to online segregate small and large molecules. This liquid chromatography system was custom built with five pumps and three two-position six-port valves to control the flow in a multipath system for the simultaneous analysis of small molecules and proteins. On separate chromatographic channels, small molecules trapped and proteins excluded from the online restricted access media were analyzed downstream using high-efficiency columns and a triple quadrupole mass spectrometer. A model sample, which included five proteins and 22 small molecules with different physicochemical properties, was used to evaluate the system. Following injection, the complete multipath separation and detection was performed in 22 min. Protein exclusion by the restricted access media was not quantitative. Four commercial trap columns were evaluated for their exclusion efficiency toward the proteins. Exclusion efficiency varied from <50% to only a maximum of 75% exclusion across the trap columns tested. An attempt was made to optimize the exclusion efficiency using different flow rates, flow rate gradients, and different additives both in the sample and the mobile phases. Protein exclusion was still erratic and generally nonquantitative.

Online extraction of antihypertensive drugs and their metabolites from untreated human serum samples using restricted access carbon nanotubes in a column switching liquid chromatography system

A novel analytical method was developed to determine 5 antihypertensive drugs of different pharmacological classes (angiotensin-converting enzyme inhibitors, calcium channel blockers, α-2 adrenergic receptor agonists, angiotensin II receptor blockers, and aldosterone receptor antagonists) and some of their metabolites in human serum. The untreated samples were directly analyzed in a column switching system using an extraction column packed with restricted access carbon nanotubes (RACNTs) in an ultra-high performance liquid chromatography coupled to a mass spectrometer (UHPLC-MS/MS). The RACNTs column was able to exclude approximately 100% of proteins from the samples in 2.0min, maintaining the same performance for about 300 analytical cycles. The method was validated in accordance with Food and Drug Administration (FDA) guidelines, being linear for all the determined analytes in their respective analytical ranges (coefficients of determination higher than 0.99) with limits of detection (LODs) and quantification (LOQs) ranging from 0.09 to 10.85μgL^-1 and from 0.30 to 36.17μgL^-1, respectively. High recovery values (88-112%) were obtained as well as suitable results for inter and intra-assay accuracy and precision. The method provided an analytical frequency of 5 samples per hour, including the sample preparation and separation/detection steps. The validated method was successfully used to analyze human serum samples of patients undergoing treatment with antihypertensive drugs, being useful for pharmacometabolomic, pharmacogenomic, and pharmacokinetic studies.

Targeted quantification of lipid mediators in skeletal muscles using restricted access media-based trap-and-elute liquid chromatography-mass spectrometry

Lipid mediators (LMs) are a class of bioactive metabolites of the essential polyunsaturated fatty acids (PUFA), which are involved in many physiological processes. Their quantification in biological samples is critical for understanding their functions in lifestyle and chronic diseases, such as diabetes, as well allergies, cancers, and in aging processes. We developed a rapid, and sensitive LC-MS/MS method to quantify the concentrations of 14 lipid mediators of interest in mouse skeletal muscle tissue without time-consuming liquid-liquid or solid-phase extractions. A restricted-access media (RAM) based trap was used prior to LC-MS as cleanup process to prevent the analytical column from clogging and deterioration. The system enabled automatic removal of residual proteins and other biological interferences presented in the tissue extracts; the target analytes were retained in the trap and then eluted to an analytical column for separation. Matrix evaluation tests demonstrated that the use of the combined RAM trap and chromatographic separation efficiently eliminated the biological or chemical matrix interferences typically encountered in bioanalytical analysis. Using 14 LM standards and 12 corresponding deuterated compounds as internal standards, the five-point calibration curves, established over the concentration range of 0.031-320 ng mL^-1, demonstrated good linearity of r² > 0.9903 (0.9903-0.9983). The lower detection limits obtained were 0.016, 0.031, 0.062, and 0.31 ng mL^-1 (0.5, 1, 2, and 10 pg on column), respectively, depending on the specific compounds. Good accuracy (87.1-114.5%) and precision (<13.4%) of the method were observed for low, medium, and high concentration quality control samples. The method was applied to measure the amount of 14 target LMs in mouse skeletal muscle tissues. All 14 analytes in this study were successfully detected and quantified in the gastrocnemius muscle samples, which provided crucial information for both age and gender-related aspects of LMs signaling in skeletal muscles previously unknown. This method could be applied to advance the understanding of skeletal muscle pathophysiology to study the role of LMs in health and disease. Furthermore, we will expand the application of this methodology to humans and other tissues/matrices in the near future.

Preparation of a monolithic cation-exchange material with hydrophilic external layers by two-step reversible addition-fragmentation chain transfer polymerization

In recent years, the efficient analysis of biological samples has become more important due to the advances of life science and pharmaceutical research and practice. Because biological sample pretreatment is the bottleneck for fast process, material development for efficient sample process in the high-performance liquid chromatography analysis is highly desirable. In this research, a cation-exchange restricted access monolithic column was synthesized by a reversible addition-fragmentation chain transfer polymerization method. Utilizing the controlled/living property of the reversible addition-fragmentation chain transfer method, a monolithic column of cross-linked poly(sulfopropyl methacrylate) was prepared first and then linear poly(glycerol mono-methacrylate) was immobilized covalently on the surface of the polymer. The monolithic material has both functionalities of cation-exchange and protein exclusion. Protein recovery of 94.6% was obtained after grafting of poly(glycerol mono-methacrylate) while the cation-exchange property of the column is still retained. In the study, the relation between the synthetic conditions and properties of the materials was studied. The synthesis conditions including the porogen, monomer concentration, and ratio of monomers/initiator/reversible addition-fragmentation chain transfer agent were optimized. The study provided a method for the preparation of restricted access monolithic columns: a bifunctional material by reversible addition-fragmentation chain transfer polymerization method.

Bioanalytical challenge: A review of environmental and pharmaceuticals contaminants in human milk

An overview of bioanalytical methods for the determination of environmental and pharmaceutical contaminants in human milk is presented. The exposure of children to these contaminants through lactation has been widely investigated. The human milk contains diverse proteins, lipids, and carbohydrates and the concentration of these components is drastically altered during the lactation period providing a high degree of an analytical challenge. Sample collection and pretreatment are still considered the Achilles' heel. This review presents liquid chromatographic methods developed in the last 10 years for this complex matrix with focuses in the extraction and quantification steps. Green sample preparation protocols have been emphasized.

An overview of multidimensional liquid phase separations in food analysis

Food safety is a priority public health concern that demands analytical methods capable to detect low concentration level of contaminants (e.g. pesticides and antibiotics) in different food matrices. Due to the high complexity of these matrices, a sample preparation step is in most cases mandatory to achieve satisfactory results being usually tedious, lengthy, and prone to the introduction of errors. For this reason, many research groups have focused efforts on the development of online systems capable to do the cleanup, concentration, and separation steps at once through multidimensional separation techniques (MDS). Among several possible setups, the most popular are the multidimensional chromatographic techniques (MDC) that consist in combining more than one mobile and/or stationary phase to provide a satisfactory separation. In the present review, we selected a variety of multidimensional separation systems used for food contaminant analysis in order to discuss the instrumentation aspects, the concept of orthogonality, column approaches used in these systems, and new materials that can be used in these columns. Selected classes of contaminants present in food matrices are introduced and discussed as example of the potential applications of multidimensional liquid phase separation techniques in food safety.

Solid-phase extraction of explosive nitramines on macroreticular polymers modified by freezing with water or acetone

A novel approach is proposed to modify the porous structure and surface properties of the polymers used in solid-phase extraction. The approach involves soaking in water or acetone, followed by freezing in liquid nitrogen (77.4 K) and was employed for two polymeric materials: Amberlite XAD-7 and Amberlite XAD-16. Variations in the surface properties of the adsorbents were justified by the action of acetone and water as solvents affecting the textural and other characteristic of the materials. The initial and treated adsorbents were used in extraction of explosive nitramines from aqueous samples. The performed modifications of the polymer texture allow us to increase the recovery rate as compared with the initial adsorbents. The results were justified by the swelling of fragments of the polymers and by the additional process of sorption of nitramines. The results indicate that polymeric adsorbents can be easily modified by the soaking/freezing process and the materials can be achieved that prove usefulness for the effective separation of explosive nitramines from aqueous samples.

Simultaneous analysis of nanoparticles and small molecules by high-performance liquid chromatography using a silica monolithic column

A high-performance liquid chromatography method using a commercially available silica monolithic column for the simultaneous analysis of nanoparticles and small molecules was developed. The method uses the micrometer-sized flow-through pores and nanometer-sized mesopores of the monolithic column for separation: first, size separation of nanoparticles was performed by the micrometer-sized pores using the hydrodynamic mode, and then small molecules were separated by the nanometer-sized pores using the normal-phase mode. The method was used to evaluate and compare three existing methods for purifying nanoparticles and to analyse nanoparticle stability. The bimodal structure of the monolithic column is promising for the simultaneous separation of nanoparticles and small molecules.

Regulated bioanalysis of conformers - A case study with ASP2151 in dog plasma and urine

We developed and validated bioanalytical methods for a potent helicase-primase inhibitor ASP2151 that has two conformers. These conformers elute as unseparated broad peaks under ordinary high-performance liquid chromatographic conditions, indicating discernable differences in hydrophobicity. We observed that column temperature and mobile phase pH have no effect on these peaks and that conformers form a single symmetrical peak when tetrahydrofuran is added to the mobile phase. In addition, we needed to develop semi-automated methods where inter-conversion of the conformers is unlikely to cause sample-to-sample extraction variability. Briefly, following the addition of deuterium-labeled ASP2151 as an internal standard (IS), dog plasma samples or acetonitrile-added urine samples were filtrated. The filtrates were then injected into a column-switching liquid chromatography-tandem mass spectrometry (LC-MS/MS) system and trapped onto an extraction column. Extracts were back-flushed onto an analytical C18 column (4.6×50mm, 3μm) with a mobile phase consisting of methanol, tetrahydrofuran, and 20mmol/L ammonium acetate (45:5:50, v/v/v). The eluent was monitored in the negative atmospheric pressure chemical ionization mode. The calibration curve was linear over a range of 5-1000ng/mL for plasma and 0.5-100μg/mL for urine. Validation data met the acceptance criteria in accordance with regulatory guidance and demonstrated that these methods were selective, accurate, and reproducible. In addition, the present methods were successfully applied to a pharmacokinetic study in dogs.

Evaluation of adsorption and desorption steps in the solid-phase extraction of explosives using carbon/silica gel nanocomposites

New series of carbon/silica gel nanocomposites, carbosils, prepared by the carbonization of starch bound to silica gel, and carbosils additionally silylated with octadecyldimethylchlorosilane were synthesized. These materials were applied as adsorbents in the solid-phase extraction of explosive nitrate esters and nitroaromatics from aqueous solutions. The adsorption and desorption steps were evaluated separately. It was found that both the molecular properties of explosives (dipole moments, orbital energies, solvation effects) and textural properties influenced by carbon deposits or octadecyl moieties have a large impact on the recovery rates. It was shown that the composites with moderate content of carbon deposits or with the highest amounts of carbon deposits and additionally silylated can be used as materials tailored for extraction of explosives from the aqueous solutions.

The current role of on-line extraction approaches in clinical and forensic toxicology

In today's clinical and forensic toxicological laboratories, automation is of interest because of its ability to optimize processes, to reduce manual workload and handling errors and to minimize exposition to potentially infectious samples. Extraction is usually the most time-consuming step; therefore, automation of this step is reasonable. Currently, from the field of clinical and forensic toxicology, methods using the following on-line extraction techniques have been published: on-line solid-phase extraction, turbulent flow chromatography, solid-phase microextraction, microextraction by packed sorbent, single-drop microextraction and on-line desorption of dried blood spots. Most of these published methods are either single-analyte or multicomponent procedures; methods intended for systematic toxicological analysis are relatively scarce. However, the use of on-line extraction will certainly increase in the near future.

Nanoconfining affinity materials for pH-mediated protein capture–release

Based on the nanoconfinement effect, two new affinity materials that have a pH-responsive capture–release ability for proteins were developed.