Highly selective coextraction of rhodamine B and dibenzyl phthalate based on high-density dual-template imprinted shells on silica microparticles

Dual-Template Imprinted Polyaniline Designed by Response Surface Methodology

In this work, we investigated the possibility of using response surface methodology to optimize the conditions for the synthesis of molecularly imprinted polyaniline specific to quercetin and horseradish peroxidase simultaneously. The work also discusses the role of horseradish peroxidase during aniline polymerization. As far as we know, a methodology for the synthesis of dual-template imprinted polyaniline selective to low and high molecular weight compounds simultaneously has not been described previously. The imprinted polyaniline layer was obtained on the surface of a microtitration plate, and response surface methodology was used to predict the optimal synthesis conditions to achieve the highest possible selectivity of polyaniline to quercetin (imprinting factor 2.4). We used the predicted optimal conditions to produce a polyaniline-modified microtitration plate and successfully used it for solid-phase extraction of quercetin and horseradish peroxidase with high selectivity (imprinting factors 2.3 and 24.6, respectively) in model solutions. Sorption capacity was 0.7 and 1.2 mg g-1 for quercetin and horseradish peroxidase, respectively. As we can see, the results of response surface methodology prediction were in good agreement with the experimental values of the quercetin imprinting factor.

Toxicity and mechanism of mesoporous silica nanoparticles in eyes

The study on the safety of nanomaterials in eyes is still in its early stages. In this study, we put our focus on the effect of one important nanoparticle feature - large surface area - to assess eye safety. To this end, mesoporous silica nanoparticles (MSiNPs) were for the first time employed as a model to evaluate their toxicity in eyes. The porosity of the MSiNPs endows them with a large surface area and the ability to attach to surrounding chemical or biological molecules, further enhancing their surface reactivity and toxic effects. Therefore, to better mimic MSiNP exposure in real environments, we also introduced other hazardous substances such as silver ions (Ag+) to the system and then investigated their synergistic nanotoxicity. Our results showed that the exposure to MSiNPs-Ag+ and even Ag+ at a safe dose, resulted in more significant toxicity than the MSiNPs alone, as evidenced from cell viability, apoptosis, reactive oxygen species (ROS) production, and DNA damage experiments. RNA-Sequencing analysis revealed that the mRNA surveillance signalling pathway plays a unique role in regulating MSiNPs-Ag+-induced cytotoxicity. Besides this, severe corneal damage and dry eye were observed in rat models upon exposure to MSiNPs-Ag+ compared to MSiNPs. Most importantly, we also proposed a protein corona-based therapy to treat MSiNP-induced corneal disease, where the corneal damage could be rescued by fetal bovine serum (FBS) treatment.

A sensitive electrochemical sensor modified with multi-walled carbon nanotubes doped molecularly imprinted silica nanospheres for detecting chlorpyrifos

A highly sensitive and convenient electrochemical sensor, based on surface molecularly imprinted polymers and multiwalled carbon nanotubes, was successfully developed to detect chlorpyrifos in real samples. In order to solve the problems like uneven shapes, poor size accessibility, and low imprinting capacity, the layer of the molecularly imprinted polymer was prepared on the surface of silica nanospheres. Moreover, the doping of multiwalled carbon nanotubes greatly improved the electrical properties of developed sensor. Under the optimal conductions, the electrochemical response of the sensor is linearly proportional to the concentration of chlorpyrifos in the range of 5.0 × 10^-12 -5.0 × 10^-8  mol/L with a low detection limit of 8.1 × 10^-13  mol/L. The prepared sensor exhibited multiple advantages such as low cost, simple preparation, convenient use, excellent selectivity, and good reproducibility. Finally, the prepared sensor was successfully used to detect chlorpyrifos in vegetable and fruit.

New multifunctional 3D porous metal–organic framework with selective gas adsorption, efficient chemical fixation of CO2 and dye adsorption

A new porous Mn(ii)-based MOF was obtained. The studies indicated it exhibits an effective storage capacity for CO₂, highly efficient catalyst behavior for epoxides with different substituents and rapid adsorption behavior of different dyes.

Molecularly imprinted polymers for the detection of illegal drugs and additives: a review

This review (with 154 refs.) describes the current status of using molecularly imprinted polymers in the extraction and quantitation of illicit drugs and additives. The review starts with an introduction into some synthesis methods (lump MIPs, spherical MIPs, surface imprinting) of MIPs using illicit drugs and additives as templates. The next section covers applications, with subsections on the detection of illegal additives in food, of doping in sports, and of illicit addictive drugs. A particular focus is directed towards current limitations and challenges, on the optimization of methods for preparation of MIPs, their applicability to aqueous samples, the leakage of template molecules, and the identification of the best balance between adsorption capacity and selectivity factor. At last, the need for convincing characterization methods, the lack of uniform parameters for defining selectivity, and the merits and demerits of MIPs prepared using nanomaterials are addressed. Strategies are suggested to solve existing problems, and future developments are discussed with respect to a more widespread use in relevant fields. Graphical abstract This review gives a comprehensive overview of the advances made in molecularly imprinting of polymers for use in the extraction and quantitation of illicit drugs and additives. Methods for syntheses, highlighted applications, limitations and current challenges are specifically addressed.

Thermosensitive Metal Chelation Dual-Template Epitope Imprinting Polymer Using Distillation-Precipitation Polymerization for Simultaneous Recognition of Human Serum Albumin and Transferrin

A new type of thermosensitive dual-template epitope molecular imprinting polymer was prepared and coated on magnetic carbon nanotubes (MCNTs@D-EMIP) for simultaneous recognition of human serum albumin (HSA) and transferrin (Trf) via the strategies of dual-template epitope imprinting, metal chelation imprinting, and distillation-precipitation polymerization (DPP). C-terminal peptides of HSA and C-terminal peptides of Trf were selected as templates, zinc acrylate and N-isopropylacrylamide were used as functional monomers, and MCNTs@D-EMIP was prepared by the method of DPP. The two types of template epitopes were immobilized by metal chelation and six-membered ring formed with zinc acylate. MCNTs@D-EMIP was prepared in only 30 min, which was much shorter than other polymerization methods. The resultant MCNTs@D-EMIP showed excellent specific recognition ability toward HSA and Trf. The adsorption amounts of MCNTs@D-EMIP for HSA and Trf were 103.67 and 68.48 mg g^-1 and the imprinting factors were 2.57 and 2.17, respectively. In addition, MCNTs@D-EMIP displayed a thermosensitive property to realize temperature-controlled recognition and release of target proteins. Furthermore, the results of high-performance liquid chromatography analysis proved that MCNTs@D-EMIP could be applied to specifically recognize two types of targets simultaneously in the biosample. The proposed strategy provided a preparation method for the thermosensitive dual-template epitope imprinting polymer via dual-template imprinting, metal chelation imprinting, and DPP.