Accurate Kinetics of Cyclization Reactions of the Large-Size Hydroperoxy Methyl-Ester Radicals Investigated by the Isodesmic Reaction Correction Method

The cyclization reactions of hydroperoxymethylester radicals are pivotal in low-temperature methyl-ester combustion but limited experimental and theoretical kinetic data pose challenges. Prior research has drawn upon analogous hydroperoxy alkyl radical cyclization reactions to approximate rate constants and might inaccurately represent ester group-specific behavior. This study systematically investigates these kinetics, accounting for ester group effects and computational complexities in large molecular systems. The reactions are categorized into 11 classes based on cyclic transition state size and -OOH/radical positions. Energy barriers and high-pressure-limit rate constants are calculated using the isodesmic reaction correction method, validated, and applied to 24 subclasses based on carbon sites connected to -OOH and radical moieties. Subclass high-pressure-limit rate rules are derived through averaging rate constants. Analysis reveals uncertainties within acceptable chemical accuracy limits, validating the reaction classification and rate rules. We conduct comparative analyses with values from analogous alkyl reactions in established mechanisms while comparing our results with the high-pressure-limit rate rules for analogous alkane reactions. These comparisons reveal notable disparities, emphasizing the ester group's influence and necessitating tailored ester-specific rate rules. These findings hold promise for improving automatic reaction mechanism generation, particularly for large methyl esters.

Investigating the kinetics of the intramolecular H-migration reaction class of methyl-ester peroxy radicals in low-temperature oxidation mechanisms of biodiesel

Biodiesel is a promising, sustainable, and carbon-neutral fuel. However, studying its combustion mechanisms comprehensively, both theoretically and experimentally, presents challenges due to the complexity and size of its molecules. One significant obstacle in determining low-temperature oxidation mechanisms for biodiesel is the lack of kinetic parameters for the reaction class of intramolecular H-migration reactions of alkyl-ester peroxy radicals, labeled as R(CO)OR'-OO˙ (where the 'dot' represents the radical). Current biodiesel combustion mechanisms often estimate these parameters from the analogous reaction class of intramolecular H-migration reactions of alkyl peroxy radicals in alkane combustion mechanisms. However, such estimations are imprecise and neglect the unique characteristics of the ester group. This research aims to explore the kinetics of the reaction class of H-migration reactions of methyl-ester peroxy radicals. The reaction class is divided into 20 subclasses based on the newly formed cycle size of the transition state, the positions of the peroxy radical and the transferred H atom, and the types of carbons from which the H atom is transferred. Energy barriers for each subclass are calculated by using the CBS-QB3//M06-2X/6-311++G(d,p) method. High-pressure-limit and pressure-dependent rate constants ranging from 0.01 to 100 atm are determined using the transition state theory and Rice-Ramsberger-Kassel-Marcus/master-equation method, respectively. It is noted that the pressure-dependent rate constants calculated for each individual isomerization channel could bring some uncertainties while neglecting the interconnected pathways. A comprehensive comparison is made between our values of selected reactions and high-level calculated values of the corresponding reactions reported in the literature. The small deviation observed between these values indicates the accuracy and reliability of the energy barriers and rate constants calculated in this study. Additionally, our calculated high-pressure-limit rate constants are compared with the corresponding values in combustion mechanisms of esters, which were estimated based on analogous reactions of alkyl peroxy radicals. These comparative analyses shed light on the significant impact of the ester group on the kinetics, particularly when the ester group is involved in the reaction center. Finally, the high-pressure-limit rate rule and pressure-dependent rate rule for each subclass are derived by averaging the rate constants of reactions in each subclass. The accurate and reasonable rate rules for methyl-ester peroxy radicals developed in this study play a crucial role in enhancing our understanding of the low-temperature oxidation mechanisms of biodiesel.

Modeling-Experiment-Theory Analysis of Reactions Initiated from Cl + Methyl Formate

Methyl formate (MF; CH3OCHO) is the smallest representative of esters, which are common components of biodiesel. The present study characterizes the thermal dissociation kinetics of the radicals formed by H atom abstraction from MF─CH3OCO and CH2OCHO─through a combination of modeling, experiment, and theory. For the experimental effort, excimer laser photolysis of Cl2 was used as a source of Cl atoms to initiate reactions with MF in the gas phase. Time-resolved species profiles of MF, Cl2, HCl, CO2, CH3, CH3Cl, CH2O, and CH2ClOCHO were measured and quantified using photoionization mass spectrometry at temperatures of 400-750 K and 10 Torr. The experimental data were simulated using a kinetic model, which was informed by ab initio-based theoretical kinetics calculations and included chlorine chemistry and secondary reactions of radical decomposition products. We calculated the rate coefficients for the H-abstraction reactions Cl + MF → HCl + CH3OCO (R1a) and Cl + MF → HCl + CH2OCHO (R1b): k1a,theory = 6.71 × 10-15·T1.14·exp(-606/T) cm3/molecule·s; k1b,theory = 4.67 × 10-18·T2.21·exp(-245/T) cm3/molecule·s over T = 200-2000 K. Electronic structure calculations indicate that the barriers to CH3OCO and CH2OCHO dissociation are 13.7 and 31.6 kcal/mol and lead to CH3 + CO2 (R3) and CH2O + HCO (R5), respectively. The master equation-based theoretical rate coefficients are k3,theory (P = ∞) = 2.94 × 109·T1.21·exp(-6209/T) s-1 and k5,theory (P = ∞) = 8.45 × 108·T1.39·exp(-15132/T) s-1 over T = 300-1500 K. The calculated branching fractions into R1a and R1b and the rate coefficient for R5 were validated by modeling of the experimental species time profiles and found to be in excellent agreement with theory. Additionally, we found that the bimolecular reactions CH2OCHO + Cl, CH2OCHO + Cl2, and CH3 + Cl2 were critical to accurately model the experimental data and constrain the kinetics of MF-radicals. Inclusion of the kinetic parameters determined in this study showed a significant impact on combustion simulations of larger methyl esters, which are considered as biodiesel surrogates.

High Resolution Photoelectron Spectroscopy of the Acetyl Anion

High-resolution photoelectron spectra of cryogenically cooled acetyl anions (CH₃CO^-) obtained using slow photoelectron velocity-map imaging are reported. The high resolution of the photoelectron spectrum yields a refined electron affinity of 0.4352 ± 0.0012 eV for the acetyl radical as well as the observation of a new vibronic structure that is assigned based on ab initio calculations. Three vibrational frequencies of the neutral radical are measured to be 1047 ± 3 cm^-1 (ν₆), 834 ± 2 cm^-1 (ν₇), and 471 ± 1 cm^-1 (ν₈). This work represents the first experimental measurement of the ν₆ frequency of the neutral. The measured electron affinity is used to calculate a refined value of 1641.35 ± 0.42 kJ mol^-1 for the gas-phase acidity of acetaldehyde. Analysis of the photoelectron angular distributions provides insight into the character of the highest occupied molecular orbital of the anion, revealing a molecular orbital with strong d-character. Additionally, details of a new centroiding algorithm based on finite differences, which has the potential to decrease data acquisition times by an order of magnitude at no cost to accuracy, are provided.

Catalytic combustion of methyl butanoate over HZSM-5 zeolites

Catalytic combustion technology is an exciting prospect for the removal of pollutants, especially in the field of transportation. Applying zeolites in fuel combustion has gained increasing importance in heterogeneous catalysis arising from their properties such as economical practicability and high activity. However, compared with the extensively investigated homogeneous combustion, few studies have been reported to explore the catalytic combustion of large-molecule fuels, especially for the catalytic combustion of biodiesel surrogate fuels. The purpose of this feature article is to describe the catalytic combustion of methyl butanoate (one of the biodiesel surrogate fuels) over unmodified HZSM-5 zeolites with a particular focus on the catalytic reaction mechanism. Experiments and theoretical calculations were considered here to help explain the proposed catalytic mechanism. This paper can provide new insights into the catalytic mechanism of biodiesel fuels that will guide the improvement of combustion efficiency in internal combustion engines and in the control of pollutant emissions.

Kinetics of Hydrogen Abstraction Reactions of Methyl Palmitate and Octadecane by Hydrogen Atoms

Hydrogen abstractions play a crucial role in the consumption of fuel molecules during fuel pyrolysis and combustion processes. In this study, a generalized energy-based fragmentation approach was used to obtain CCSD(T)-F12a/cc-pVTZ energy barriers of hydrogen abstraction reactions by hydrogen atoms from methyl palmitate (C₁₅H₃₁COOCH₃), a key component of biodiesel. The accuracy of M06-2X/6-311++G(d,p) for obtaining the energy barriers was evaluated against the CCSD(T) results. Based on the quantum chemical results, the high-pressure-limit rate constants for C₁₅H₃₁COOCH₃ + H were calculated and compared with those of octadecane ( n-C₁₈H₃₈) reacting with H. The treatment of hindered internal rotations for such long-chain molecules was discussed and the rate rules for different abstraction sites were summarized. The results show that in the C₁₅H₃₁COOCH₃ + H system, the α hydrogen abstraction no longer plays a dominant role as in small methyl esters, and the hydrogen atoms of CH₂ groups far away from the ester group are more easily abstracted than those near the ester group.

Study of low temperature chlorine atom initiated oxidation of methyl and ethyl butyrate using synchrotron photoionization TOF-mass spectrometry

The initial oxidation products of methyl butyrate (MB) and ethyl butyrate (EB) are studied using a time- and energy-resolved photoionization mass spectrometer.

Experimental and theoretical study on thermal decomposition of methyl butanoate behind reflected shock waves

The rate coefficients for total decomposition of MB in the temperature range of 1229–1427 K, were reported.

Experimental and modeling study of the thermal decomposition of methyl decanoate

The experimental study of the thermal decomposition of methyl decanoate was performed in a jet-stirred reactor at temperatures ranging from 773 to 1123 K, at residence times between 1 and 4 s, at a pressure of 800 Torr (106.6 kPa) and at high dilution in helium (fuel inlet mole fraction of 0.0218). Species leaving the reactor were analyzed by gas chromatography. Main reaction products were hydrogen, carbon oxides, small hydrocarbons from C₁ to C₃, large 1-olefins from 1-butene to 1-nonene, and unsaturated esters with one double bond at the end of the alkyl chain from methyl-2-propenoate to methyl-8-nonenoate. At the highest temperatures, the formation of polyunsaturated species was observed: 1,3-butadiene, 1,3-cyclopentadiene, benzene, toluene, indene, and naphthalene. These results were compared with previous ones about the pyrolysis of n-dodecane, an n-alkane of similar size. The reactivity of both molecules was found to be very close. The alkane produces more olefins while the ester yields unsaturated oxygenated compounds. A detailed kinetic model for the thermal decomposition of methyl decanoate has been generated using the version of software EXGAS which was updated to take into account the specific chemistry involved in the oxidation of methyl esters. This model contains 324 species and 3231 reactions. It provided a very good prediction of the experimental data obtained in jet-stirred reactor. The formation of the major products was analyzed. The kinetic analysis showed that the retro-ene reactions of intermediate unsaturated methyl esters are of importance in low reactivity systems.

Modeling Study of the Low-Temperature Oxidation of Large Methyl Esters from C11 to C19

The modeling of the low temperature oxidation of large saturated methyl esters really representative of those found in biodiesel fuels has been investigated. Models have been developed for these species and then detailed kinetic mechanisms have been automatically generated using a new extended version of software EXGAS, which includes reactions specific to the chemistry of esters. A model generated for a binary mixture of n-decane and methyl palmitate was used to simulate experimental results obtained in a jet-stirred reactor for this fuel. This model predicts very well the reactivity of the fuel and the mole fraction profiles of most reaction products. This work also shows that a model for a middle size methyl ester such as methyl decanoate predicts fairly well the reactivity and the mole fractions of most species with a substantial decrease in computational time. Large n-alkanes such as n-hexadecane are also good surrogates for reproducing the reactivity of methyl esters, with an important gain in computational time, but they cannot account for the formation of specific products such as unsaturated esters or cyclic ethers with an ester function.

Modeling of the oxidation of methyl esters-Validation for methyl hexanoate, methyl heptanoate, and methyl decanoate in a jet-stirred reactor

The modeling of the oxidation of methyl esters was investigated and the specific chemistry, which is due to the presence of the ester group in this class of molecules, is described. New reactions and rate parameters were defined and included in the software EXGAS for the automatic generation of kinetic mechanisms. Models generated with EXGAS were successfully validated against data from the literature (oxidation of methyl hexanoate and methyl heptanoate in a jet-stirred reactor) and a new set of experimental results for methyl decanoate. The oxidation of this last species was investigated in a jet-stirred reactor at temperatures from 500 to 1100 K, including the negative temperature coefficient region, under stoichiometric conditions, at a pressure of 1.06 bar and for a residence time of 1.5 s: more than 30 reaction products, including olefins, unsaturated esters, and cyclic ethers, were quantified and successfully simulated. Flow rate analysis showed that reactions pathways for the oxidation of methyl esters in the low-temperature range are similar to that of alkanes.