Production of narrow but deep lesions suitable for ablation of atrial fibrillation using a saline-cooled narrow beam Nd:YAG laser catheter

Heart ablation using a planar rectangular high intensity ultrasound transducer and MRI guidance

The aim of this study was to evaluate a flat rectangular (3×10mm(2)) MRI compatible transducer operating at 5MHz. The main task was to explore the feasibility of creating deep lesions in heart at a depth of at least 15mm. The size of thermal necrosis in heart tissue was estimated as a function of power and time using a simulation model. The system was then tested in an excised lamb heart. In this study, we were able to create lesions of 15mm deep with acoustic power of 6W for an exposure of approximately 1min. The contrast to noise ratio (CNR) between lesion and heart tissue was evaluated using fast spin echo (FSE). The CNR value was approximately 22 using T1W FSE. Maximum CNR was achieved with repetition time (TR) between 300 and 800ms. Using T2W FSE, the corresponding CNR was approximately 13 for the 14 in vivo experiments. The average lesion depth was 11.93mm with a standard deviation of 0.62mm. In vivo irradiation conditions were 6W for 60s. The size of the lesion in the other two dimensions was close to 3×10mm(2) (size of the transducer element).

An overview of energy sources in clinical use for the ablation of atrial fibrillation

Recent years have seen many developments in the field of alternative energy sources for arrhythmia surgery. The impetus behind these advances is to replace the traditional, "cut-and-sew" Cox maze III procedure with lesion sets that are simpler, shorter, and safer but just as effective. There is demand for technology to make continuous, linear, transmural ablations reliably with a versatile energy source via an epicardial approach. This would make minimally invasive endoscopic surgical ablation of atrial fibrillation (AF) without cardiopulmonary bypass and with a closed chest feasible. These advances would shorten cardio-pulmonary bypass and improve outcomes in patients having surgical ablation and concomitant cardiac surgery. This review summarizes the technology behind alternative energy sources used to treat AF. Alternative energy sources include hypothermic sources (cryoablation) and hyperthermic sources (radiofrequency, microwave, laser, ultrasound). For each source, the biophysical background, mode of tissue injury, factors affecting lesion size, and advantages and complications are discussed.

The technology in use for the surgical ablation of atrial fibrillation

The purpose of this article is to present and evaluate the various technologies recently developed for the surgical treatment of atrial fibrillation as alternatives or adjuncts to the traditional Maze III procedure and other "cut and sew" techniques. The discussion contains a detailed consideration of the biophysical background of the most common ablation techniques, their mode of tissue injury, the methods of use, and the related complications through a review of the existing literature and analysis of experimental results. All of the current technologies presented are still being tested to augment the success rates and reduce the incidence of complications, although all are not available for clinical use. Radiofrequency and cryoablation have been used clinically on large numbers of patients with varying results. Microwave technology has been used in small groups of patients, and the results are to be evaluated. Laser technology is still in an experimental phase, and the clinical results are forthcoming. True transmurality, reduction of operative time, friendly use of ablation devices, and substantial reduction of complications appear to be the key factors for broad adoption of alternative energy sources for surgical ablation.