Chitosan-Placental ECM Composite Thermos-Responsive Hydrogel as a Biomimetic Wound Dressing with Angiogenic Property

A Natural Eumelanin-Assisted Pullulan/Chitosan Hydrogel for the Management of Diabetic Oral Ulcers

Existing methods for treating diabetic oral ulcers often fall short in clinical environments due to potential bacterial contamination, oxidative harm, and hindered angiogenesis throughout the healing process. Here, a hydrogel patch (HYG2) have been developed for local in situ application. HYG2 comprises oxidized pullulan, quaternized chitosan, and eumelanin nanoparticles derived from cuttlefish ink. These components work together to efficiently heal wounds associated with diabetic oral ulcers. Application begins with a simple local injection that quickly forms a protective barrier over the mucosa, effectively stopping bleeding and counteracting inflammatory agents. HYG2 is distinguished by its strong antibacterial properties and capacity to eliminate reactive oxygen species, promoting bacteria clearance and managing oxidative stress, which accelerates the healing phase from inflammation to tissue regeneration. Additionally, HYG2's 3D structure, incorporating elements from natural sources, offers exemplary support for structural and nutritional cell needs. This enhancement fosters cell adhesion, migration, and proliferation, along with further angiogenesis during mucosal remodeling. Ultimately, HYG2 is fully absorbed by the body after serving its therapeutic functions. Evidence from in vitro and in vivo studies shows that HYG2 hydrogel markedly accelerates mucosal wound repair, making it a promising treatment for diabetic oral ulcers.

Multifunctional Dual Nano-MOF-Modified Decellularized Small Intestinal Submucosa Membrane Accelerates Healing of Infected Wound

The treatment of complex or chronic skin wounds caused by burns, trauma, surgery, and genetic disorders has been a worldwide challenge. Small intestinal submucosa (SIS) is a biological material that is widely used in wound healing. How to further expand the wound healing application of SIS, especially in repairing infected wounds, remains a hot research topic for many tissue engineering and biomaterial scholars focusing on skin regeneration. This study uses nanometal-organic frameworks (nano-MOFs), which have not been applied to modify the SIS membrane before, to construct multifunctional dual nano-MOFs @ SIS membrane (dnMOF@SISm). Nano-MOFs are functionalized onto the nanofiber of SIS via in situ self-assembly under mild reaction conditions without any toxic reagent or complex instruments. The dnMOF@SISm can release Co2+, Zn2+, and bioactive factors, participating in the whole stage of the repair of infected wounds. In vitro, it can regulate the biological activities of various functional cells such as fibroblasts, endothelial cells, and macrophages and shows good antibacterial ability. In the infected full-thickness skin defect rat model, dnMOF@SISm can release metal ions and ligands, killing pathogenic bacteria colonized on the wound surface at the first stage, and then trigger and accelerate the skin repair process via angiogenesis, immune regulation, and collagen deposition. Above all, an efficient, nontoxic, mild self-assembly strategy realizes the functionalization of dual nano-MOFs on the nanofiber of SIS to expand its clinical application scenarios, especially in infected wounds.

3D morphometry of endothelial cells angiogenesis in an extracellular matrix composite hydrogel

Human umbilical vein endothelial cells (HUVECs) play a fundamental role in angiogenesis. Herein, we introduce digital holographic microscopy (DHM) for the 3D quantitative morphological analysis of HUVECs in extracellular matrix (ECM)-based biomaterials as an angiogenesis model. The combination of volumetric information from DHM and the physicochemical and cytobiocompatibility data provided by fluorescence microscopy and cytology offers a comprehensive understanding of the angiogenesis-related parameters of HUVECs within the ECM. DHM enables label-free, non-contact, and non-invasive 3D monitoring of living samples in real time, in a quantitative manner. In this study, the human amniotic membrane (HAM) is decellularized, pulverized, and combined with sodium alginate hydrogel to provide an in vitro substrate for modeling HUVEC angiogenesis. Our results demonstrate that modifying alginate hydrogel with HAM enhances its biofunctionality due to the presence of ECM components. Moreover, the DHM results reveal an increase in its porous properties, which, in turn, aids in interpreting the tubulation results.

In-vitro and in-vivo evaluation of angiogenic potential of a novel lithium chloride loaded silk fibroin / alginate 3D porous scaffold with antibacterial activity, for promoting diabetic wound healing

Healing diabetic ulcers with chronic inflammation is a major challenge for researchers and professionals, necessitating new strategies. To rapidly treat diabetic wounds in rat models, we have fabricated a composite scaffold composed of alginate (Alg) and silk fibroin (SF) as a wound dressing that is laden with molecules of lithium chloride (LC). The physicochemical, bioactivity, and biocompatibility properties of Alg-SF-LC scaffolds were investigated in contrast to those of Alg, SF, and Alg-SF ones. Afterward, full-thickness wounds were ulcerated in diabetic rats in order to evaluate the capacity of LC-laden scaffolds to regenerate skin. The characterization findings demonstrated that the composite scaffolds possessed favorable antibacterial properties, cell compatibility, high swelling, controlled degradability, and good uniformity in the interconnected pore microstructure. Additionally, in terms of wound contraction, re-epithelialization, and angiogenesis improvement, LC-laden scaffolds revealed better performance in diabetic wound healing than the other groups. This research indicates that utilizing lithium chloride molecules loaded in biological materials supports the best diabetic ulcer regeneration in vivo, and produces a skin replacement with a cellular structure comparable to native skin.

3D printing of recombinant collagen/chitosan methacrylate/nanoclay hydrogels loaded with Kartogenin nanoparticles for cartilage regeneration

Cartilage defects are frequently caused by trauma, illness and degradation of the cartilage. If these defects are not sufficiently treated, the joints will degrade irreversibly, possibly resulting in disability. Articular cartilage lacks blood vessels and nerves and is unable to regenerate itself, so the repair of cartilage defects is extremely challenging in clinical treatment. Tissue engineering technology is an emerging technology in cartilage repair and cartilage regeneration. 3D-printed hydrogels show great potential in cartilage tissue engineering for the fabrication of 3D cell culture scaffolds to mimic extracellular matrix. In this study, we construct a 3D-printed hydrogel loaded with nanoparticles by electrostatic interaction and photo cross-linking for the regeneration of cartilage, which has adaptable and drug-continuous release behavior. A photopolymerizable bioink was prepared using recombinant collagen, chitosan, nanoclay Laponite-XLG and nanoparticles loaded with Kartogenin (KGN). This bioink was added with KGN, a small molecule drug that promotes cartilage differentiation, and as a result, the 3D-printed CF/CM/3%LAP/KGN scaffolds obtained by extrusion printing is expected to be used for cartilage repair. It was shown that the 3D-printed scaffolds had good cytocompatibility for human bone marrow mesenchymal stem cells (hBMSCs) and exhibited excellent antimicrobial properties, the continuous release of KGN in the scaffold induced the hBMSCs differentiation into chondrocytes, which significantly enhanced the expression of collagen II and glycosaminoglycan. In vivo studies have shown that implantation of KGN-loaded scaffolds into cartilage-injured tissues promoted cartilage tissue regeneration. This study demonstrated that 3D-printed CF/CM/3%LAP/KGN scaffolds can be used for cartilage repair, which is expected to lead to new healing opportunities for cartilage injury-based diseases.

Decellularized Placental Sponge Seeded with Human Mesenchymal Stem Cells Improves Deep Skin Wound Healing in the Animal Model

Skin injuries lead to a large burden of morbidity. Although numerous clinical and scientific strategies have been investigated to repair injured skin, optimal regeneration therapy still poses a considerable obstacle. To address this challenge, decellularized extracellular matrix-based scaffolds recellularized with stem cells offer significant advancements in skin regeneration and wound healing. Herein, a decellularized human placental sponge (DPS) was fabricated using the decellularization and freeze-drying technique and then recellularized with human adipose-derived mesenchymal cells (MSCs). The biological and biomechanical properties and skin full-thickness wound healing capacity of the stem cells-DPS constructs were investigated in vitro and in vivo. The DPS exhibited a uniform 3D microstructure with an interconnected pore network, 89.21% porosity, a low degradation rate, and good mechanical properties. The DPS and MSCs-DPS constructs were implanted in skin full-thickness wound models in mice. An accelerated wound healing was observed in the wounds implanted with the MSCs-DPS construct when compared to DPS and control (wounds with no treatment) during 7 and 21 days postimplantation follow-up. In the MSCs-DPS group, the wound was completely re-epithelialized, the epidermis layer was properly organized, and the dermis and epidermis' bilayer structures were restored after 7 days. Our findings suggest that DPS is an excellent carrier for MSC culture and delivery to skin wounds and now promises to proceed with clinical evaluations.

Engineering of a decellularized bovine skin coated with antibiotics-loaded electrospun fibers with synergistic antibacterial activity for the treatment of infectious wounds

An ideal antibacterial wound dressing with strong antibacterial behavior versus highly drug-resistant bacteria and great wound-healing capacity is still being developed. There is a clinical requirement to progress the current clinical cares that fail to fully restore the skin structure due to post-wound infections. Here, we aim to introduce a novel two-layer wound dressing using decellularized bovine skin (DBS) tissue and antibacterial nanofibers to design a bioactive scaffold with bio-mimicking the native extracellular matrix of both dermis and epidermis. For this purpose, polyvinyl alcohol (PVA)/chitosan (CS) solution was loaded with antibiotics (colistin and meropenem) and electrospun on the surface of the DBS scaffold to fabricate a two-layer antibacterial wound dressing (DBS-PVA/CS/Abs). In detail, the characterization of the fabricated scaffold was conducted using biomechanical, biological, and antibacterial assays. Based on the results, the fabricated scaffold revealed a homogenous three-dimensional microstructure with a connected pore network, a high porosity and swelling ratio, and favorable mechanical properties. In addition, according to the cell culture result, our fabricated two-layer scaffold surface had a good interaction with fibroblast cells and provided an excellent substrate for cell proliferation and attachment. The antibacterial assay revealed a strong antibacterial activity of DBS-PVA/CS/Abs against both standard strain and multidrug-resistant clinical isolates of Acinetobacter baumannii, Pseudomonas aeruginosa, and Escherichia coli. Our bilayer antibacterial wound dressing is strongly suggested as an admirable wound dressing for the management of infectious skin injuries and now promises to advance with preclinical and clinical research.

Asymmetric adhesive SIS-based wound dressings for therapeutically targeting wound repair

Severe tissue injuries pose a significant risk to human health. Conventional wound dressings fall short in achieving effective tissue regeneration, resulting in suboptimal postoperative healing outcomes. In this study, an asymmetric adhesive wound dressing (marked as SIS/PAA/LAP) was developed, originating from acrylate acid (AA) solution with laponite (LAP) nanoparticles polymerization and photo-crosslinked on the decellularized extracellular matrix small intestinal submucosa (SIS) patch. Extensive studies demonstrated that the SIS/PAA/LAP exhibited higher tissue adhesion strength (~ 33 kPa) and burst strength (~ 22 kPa) compared to conventional wound dressings like Tegaderm and tissue adhesive products. Importantly, it maintained favorable cell viability and demonstrated robust angiogenic capacity. In animal models of full-thickness skin injuries in rats and skin injuries in Bama miniature pigs, the SIS/PAA/LAP could be precisely applied to wound sites. By accelerating the formation of tissue vascularization, it displayed superior tissue repair outcomes. This asymmetrically adhesive SIS-based patch would hold promising applications in the field of wound dressings.

Review on chitosan-based antibacterial hydrogels: Preparation, mechanisms, and applications

Chitosan (CS) is known for its remarkable properties, such as good biocompatibility, biodegradability, and renewability, in addition to its antibacterial and biological activities. However, as CS is insoluble in water, it displays limited antibacterial performance under neutral and physiological conditions. A viable solution to this problem is grafting chemically modified groups onto the CS framework, thereby increasing its solubility and enhancing its antibacterial effect. Herein, the antibacterial action mechanism of CS and its derivatives is reviewed, confirming the prevalent use of composite materials comprising CS and its derivatives as an antibacterial agent. Generally, the antimicrobial ability of CS-based biomaterials can be enhanced by incorporating supplementary polymers and antimicrobial agents. Research on CS-based composite biomaterials is ongoing and numerous types of biomaterials have been reported, including inorganic nanoparticles, antibacterial agents, and CS derivatives. The development of these composite materials has considerably expanded the application of CS-based antibacterial materials. This study reviews the latest progress in research regarding CS-based composite hydrogels for wound repair, tissue engineering, drug release, water purification, and three-dimensional printing applications. Finally, the summary and future outlook of CS-based antibacterial hydrogels are presented in anticipation of a broader range of applications of CS-based antibacterial hydrogels.

Antimicrobial peptide-loaded decellularized placental sponge as an excellent antibacterial skin substitute against XDR clinical isolates

Post-wound infections have remained a serious threat to society and healthcare worldwide. Attempts are still being made to develop an ideal antibacterial wound dressing with high wound-healing potential and strong antibacterial activity against extensively drug-resistant bacteria (XDR). In this study, a biological-based sponge was made from decellularized human placenta (DPS) and then loaded with different concentrations (0, 16 µg/mL, 32 µg/mL, 64 µg/mL) of an antimicrobial peptide (AMP, CM11) to optimize an ideal antibacterial wound dressing. The decellularization of DPS was confirmed by histological evaluations and DNA content assay. The DPS loaded with different contents of antimicrobial peptides (AMPs) showed uniform morphology under a scanning electron microscope (SEM) and cytobiocompatibility for human adipose tissue-derived mesenchymal stem cells. Antibacterial assays indicated that the DPS/AMPs had antibacterial behavior against both standard strain and XDR Acinetobacter baumannii in a dose-dependent manner, as DPS loaded with 64 µg/mL showed the highest bacterial growth inhibition zone and elimination of bacteria under SEM than DPS alone and DPS loaded with 16 µg/mL and 32 µg/mL AMP concentrations. The subcutaneous implantation of all constructs in the animal model demonstrated no sign of acute immune system reaction and graft rejection, indicating in vivo biocompatibility of the scaffolds. Our findings suggest the DPS loaded with 64 µg/mL as an excellent antibacterial skin substitute, and now promises to proceed with pre-clinical and clinical investigations.

Natural biomarocmolecule-based antimicrobial hydrogel for rapid wound healing: A review

Antibacterial hydrogels are a type of hydrogel that is designed to inhibit the growth of bacteria and prevent infections. These hydrogels typically contain antibacterial agents that are either integrated into the polymer network or coated onto the surface of the hydrogel. The antibacterial agents in these hydrogels can work through a variety of mechanisms, such as disrupting bacterial cell walls or inhibiting bacterial enzyme activity. Some examples of antibacterial agents that are commonly used in hydrogels include silver nanoparticles, chitosan, and quaternary ammonium compounds. Antibacterial hydrogels have a wide range of applications, including wound dressings, catheters, and medical implants. They can help to prevent infections, reduce inflammation, and promote tissue healing. In addition, they can be designed with specific properties to suit different applications, such as high mechanical strength or controlled release of antibacterial agents over time. Hydrogel wound dressings have come a long way in recent years, and the future looks very promising for these innovative wound care products. Overall, the future of hydrogel wound dressings is very promising, and we can expect to see continued innovation and advancement in this field in the years to come.

3D-printed placental-derived bioinks for skin tissue regeneration with improved angiogenesis and wound healing properties

Extracellular matrix (ECM)-based bioinks has attracted much attention in recent years for 3D printing of native-like tissue constructs. Due to organ unavailability, human placental ECM can be an alternative source for the construction of 3D print composite scaffolds for the treatment of deep wounds. In this study, we use different concentrations (1.5%, 3% and 5%w/v) of ECM derived from the placenta, sodium-alginate and gelatin to prepare a printable bioink biomimicking natural skin. The printed hydrogels' morphology, physical structure, mechanical behavior, biocompatibility, and angiogenic property are investigated. The optimized ECM (5%w/v) 3D printed scaffold is applied on full-thickness wounds created in a mouse model. Due to their unique native-like structure, the ECM-based scaffolds provide a non-cytotoxic microenvironment for cell adhesion, infiltration, angiogenesis, and proliferation. In contrast, they do not show any sign of immune response to the host. Notably, the biodegradation, swelling rate, mechanical property, cell adhesion and angiogenesis properties increase with the increase of ECM concentrations in the construct. The ECM 3D printed scaffold implanted into deep wounds increases granulation tissue formation, angiogenesis, and re-epithelialization due to the presence of ECM components in the construct, when compared with printed scaffold with no ECM and no treatment wound. Overall, our findings demonstrate that the 5% ECM 3D scaffold supports the best deep wound regeneration in vivo, produces a skin replacement with a cellular structure comparable to native skin.

Advances in Functional Hydrogel Wound Dressings: A Review

One of the most advanced, promising, and commercially viable research issues in the world of hydrogel dressing is gaining functionality to achieve improved therapeutic impact or even intelligent wound repair. In addition to the merits of ordinary hydrogel dressings, functional hydrogel dressings can adjust their chemical/physical properties to satisfy different wound types, carry out the corresponding reactions to actively create a healing environment conducive to wound repair, and can also control drug release to provide a long-lasting benefit. Although a lot of in-depth research has been conducted over the last few decades, very few studies have been properly summarized. In order to give researchers a basic blueprint for designing functional hydrogel dressings and to motivate them to develop ever-more intelligent wound dressings, we summarized the development of functional hydrogel dressings in recent years, as well as the current situation and future trends, in light of their preparation mechanisms and functional effects.

Nanomaterials supported by polymers for tissue engineering applications: A review

In the biomedical sciences, particularly in wound healing, tissue engineering, and regenerative medicine, the development of natural-based biomaterials as a carrier has revealed a wide range of advantages. Tissue engineering is one of the therapeutic approaches used to replace damaged tissue. Polymers have received a lot of attention for their beneficial interactions with cells, but they have some drawbacks, such as poor mechanical properties. Due to their relatively large surface area, nanoparticles can cause significant changes in polymers and improve their mechanical properties. The nanoparticles incorporated into biomaterial scaffolds have been associated with positive effects on cell adhesion, viability, proliferation, and migration in the majority of studies. This review paper discusses recent applications of polymer-nanoparticle composites in the development of tissue engineering scaffolds, as well as the effects of these nanomaterials in the fields of cardiovascular, neural, bone, and skin tissue engineering.